Authentication and Authorization

Authentication and Authorization

This document describes non-extension specific Apache Druid authentication and authorization configurations.

Property	Type	Description	Default	Required
`druid.auth.authenticatorChain`	JSON List of Strings	List of Authenticator type names	[“allowAll”]	no
`druid.escalator.type`	String	Type of the Escalator that should be used for internal Druid communications. This Escalator must use an authentication scheme that is supported by an Authenticator in `druid.auth.authenticationChain`.	“noop”	no
`druid.auth.authorizers`	JSON List of Strings	List of Authorizer type names	[“allowAll”]	no
`druid.auth.unsecuredPaths`	List of Strings	List of paths for which security checks will not be performed. All requests to these paths will be allowed.	[]	no
`druid.auth.allowUnauthenticatedHttpOptions`	Boolean	If true, skip authentication checks for HTTP OPTIONS requests. This is needed for certain use cases, such as supporting CORS preflight requests. Note that disabling authentication checks for OPTIONS requests will allow unauthenticated users to determine what Druid endpoints are valid (by checking if the OPTIONS request returns a 200 instead of 404), so enabling this option may reveal information about server configuration, including information about what extensions are loaded (if those extensions add endpoints).	false	no

Enabling Authentication/AuthorizationLoadingLookupTest

Authenticator chain

Authentication decisions are handled by a chain of Authenticator instances. A request will be checked by Authenticators in the sequence defined by the druid.auth.authenticatorChain.

Authenticator implementations are provided by extensions.

For example, the following authentication chain definition enables the Kerberos and HTTP Basic authenticators, from the druid-kerberos and druid-basic-security core extensions, respectively:

druid.auth.authenticatorChain=["kerberos", "basic"]

A request will pass through all Authenticators in the chain, until one of the Authenticators successfully authenticates the request or sends an HTTP error response. Authenticators later in the chain will be skipped after the first successful authentication or if the request is terminated with an error response.

If no Authenticator in the chain successfully authenticated a request or sent an HTTP error response, an HTTP error response will be sent at the end of the chain.

Druid includes two built-in Authenticators, one of which is used for the default unsecured configuration.

AllowAll authenticator

This built-in Authenticator authenticates all requests, and always directs them to an Authorizer named “allowAll”. It is not intended to be used for anything other than the default unsecured configuration.

Anonymous authenticator

This built-in Authenticator authenticates all requests, and directs them to an Authorizer specified in the configuration by the user. It is intended to be used for adding a default level of access so the Anonymous Authenticator should be added to the end of the authentication chain. A request that reaches the Anonymous Authenticator at the end of the chain will succeed or fail depending on how the Authorizer linked to the Anonymous Authenticator is configured.

Property	Description	Default	Required
`druid.auth.authenticator.<authenticatorName>.authorizerName`	Authorizer that requests should be directed to.	N/A	Yes
`druid.auth.authenticator.<authenticatorName>.identity`	The identity of the requester.	defaultUser	No

To use the Anonymous Authenticator, add an authenticator with type anonymous to the authenticatorChain.

For example, the following enables the Anonymous Authenticator with the druid-basic-security extension:

druid.auth.authenticatorChain=["basic", "anonymous"]
druid.auth.authenticator.anonymous.type=anonymous
druid.auth.authenticator.anonymous.identity=defaultUser
druid.auth.authenticator.anonymous.authorizerName=myBasicAuthorizer
# ... usual configs for basic authentication would go here ...

Trusted domain Authenticator

This built-in Trusted Domain Authenticator authenticates requests originating from the configured trusted domain, and directs them to an Authorizer specified in the configuration by the user. It is intended to be used for adding a default level of trust and allow access for hosts within same domain.

Property	Description	Default	Required
`druid.auth.authenticator.<authenticatorName>.name`	authenticator name.	N/A	Yes
`druid.auth.authenticator.<authenticatorName>.domain`	Trusted Domain from which requests should be authenticated. If authentication is allowed for connections from only a given host, fully qualified hostname of that host needs to be specified.	N/A	Yes
`druid.auth.authenticator.<authenticatorName>.useForwardedHeaders`	Clients connecting to druid could pass through many layers of proxy. Some proxies also append its own IP address to ‘X-Forwarded-For’ header before passing on the request to another proxy. Some proxies also connect on behalf of client. If this config is set to true and if ‘X-Forwarded-For’ is present, trusted domain authenticator will use left most host name from X-Forwarded-For header. Note: It is possible to spoof X-Forwarded-For headers in HTTP requests, enable this with caution.	false	No
`druid.auth.authenticator.<authenticatorName>.authorizerName`	Authorizer that requests should be directed to.	N/A	Yes
`druid.auth.authenticator.<authenticatorName>.identity`	The identity of the requester.	defaultUser	No

To use the Trusted Domain Authenticator, add an authenticator with type trustedDomain to the authenticatorChain.

For example, the following enables the Trusted Domain Authenticator :

druid.auth.authenticatorChain=["trustedDomain"]
druid.auth.authenticator.trustedDomain.type=trustedDomain
druid.auth.authenticator.trustedDomain.domain=trustedhost.mycompany.com
druid.auth.authenticator.trustedDomain.identity=defaultUser
druid.auth.authenticator.trustedDomain.authorizerName=myBasicAuthorizer
druid.auth.authenticator.trustedDomain.name=myTrustedAutenticator
# ... usual configs for druid would go here ...

Escalator

The druid.escalator.type property determines what authentication scheme should be used for internal Druid cluster communications (such as when a Broker process communicates with Historical processes for query processing).

The Escalator chosen for this property must use an authentication scheme that is supported by an Authenticator in druid.auth.authenticationChain. Authenticator extension implementers must also provide a corresponding Escalator implementation if they intend to use a particular authentication scheme for internal Druid communications.

Noop escalator

This built-in default Escalator is intended for use only with the default AllowAll Authenticator and Authorizer.

Authorizers

Authorization decisions are handled by an Authorizer. The druid.auth.authorizers property determines what Authorizer implementations will be active.

There are two built-in Authorizers, “default” and “noop”. Other implementations are provided by extensions.

For example, the following authorizers definition enables the “basic” implementation from druid-basic-security:

druid.auth.authorizers=["basic"]

Only a single Authorizer will authorize any given request.

Druid includes one built in authorizer:

AllowAll authorizer

The Authorizer with type name “allowAll” accepts all requests.

Default Unsecured Configuration

When druid.auth.authenticationChain is left empty or unspecified, Druid will create an authentication chain with a single AllowAll Authenticator named “allowAll”.

When druid.auth.authorizers is left empty or unspecified, Druid will create a single AllowAll Authorizer named “allowAll”.

The default value of druid.escalator.type is “noop” to match the default unsecured Authenticator/Authorizer configurations.

Authenticator to Authorizer Routing

When an Authenticator successfully authenticates a request, it must attach a AuthenticationResult to the request, containing an information about the identity of the requester, as well as the name of the Authorizer that should authorize the authenticated request.

An Authenticator implementation should provide some means through configuration to allow users to select what Authorizer(s) the Authenticator should route requests to.

Internal system user

Internal requests between Druid processes (non-user initiated communications) need to have authentication credentials attached.

These requests should be run as an “internal system user”, an identity that represents the Druid cluster itself, with full access permissions.

The details of how the internal system user is defined is left to extension implementations.

Authorizer Internal System User Handling

Authorizers implementations must recognize and authorize an identity for the “internal system user”, with full access permissions.

Authenticator and Escalator Internal System User Handling

An Authenticator implementation that is intended to support internal Druid communications must recognize credentials for the “internal system user”, as provided by a corresponding Escalator implementation.

An Escalator must implement three methods related to the internal system user:

  public HttpClient createEscalatedClient(HttpClient baseClient);
  public org.eclipse.jetty.client.HttpClient createEscalatedJettyClient(org.eclipse.jetty.client.HttpClient baseClient);
  public AuthenticationResult createEscalatedAuthenticationResult();

createEscalatedClient returns an wrapped HttpClient that attaches the credentials of the “internal system user” to requests.

createEscalatedJettyClient is similar to createEscalatedClient, except that it operates on a Jetty HttpClient.

createEscalatedAuthenticationResult returns an AuthenticationResult containing the identity of the “internal system user”.

Reserved Name Configuration Property

For extension implementers, please note that the following configuration properties are reserved for the names of Authenticators and Authorizers:

druid.auth.authenticator.<authenticator-name>.name=<authenticator-name>
druid.auth.authorizer.<authorizer-name>.name=<authorizer-name>

These properties provide the authenticator and authorizer names to the implementations as @JsonProperty parameters, potentially useful when multiple authenticators or authorizers of the same type are configured.