Plugins

Argo CD allows integrating more config management tools using config management plugins.

Installing a CMP

There are two ways to install a Config Management Plugin (CMP): 1. Add the plugin config to the Argo CD ConfigMap. The repo-server container will run your plugin’s commands.

This is a good option for a simple plugin that requires only a few lines of code that fit nicely in the Argo CD ConfigMap. 2. Add the plugin as a sidecar to the repo-server Pod.

This is a good option for a more complex plugin that would clutter the Argo CD ConfigMap.

Option 1: Configure plugins via Argo CD configmap

The following changes are required to configure a new plugin:

  1. Make sure required binaries are available in argocd-repo-server pod. The binaries can be added via volume mounts or using a custom image (see custom_tools for examples of both).
  2. Register a new plugin in argocd-cm ConfigMap:

    1. data:
    2. configManagementPlugins: |
    3. - name: pluginName
    4. init: # Optional command to initialize application source directory
    5. command: ["sample command"]
    6. args: ["sample args"]
    7. generate: # Command to generate manifests YAML
    8. command: ["sample command"]
    9. args: ["sample args"]
    10. lockRepo: true # Defaults to false. See below.

    The generate command must print a valid YAML or JSON stream to stdout. Both init and generate commands are executed inside the application source directory.

  3. Create an Application which uses your new CMP.

More CMP examples are available in argocd-example-apps.

Repository locking

If your plugin makes use of git (e.g. git crypt), it is advised to set lockRepo to true so that your plugin will have exclusive access to the repository at the time it is executed. Otherwise, two applications synced at the same time may result in a race condition and sync failure.

Option 2: Configure plugin via sidecar

An operator can configure a plugin tool via a sidecar to repo-server. The following changes are required to configure a new plugin:

1. Write the plugin configuration file

Plugins will be configured via a ConfigManagementPlugin manifest located inside the plugin container.

  1. apiVersion: argoproj.io/v1alpha1
  2. kind: ConfigManagementPlugin
  3. metadata:
  4. name: cmp-plugin
  5. spec:
  6. version: v1.0
  7. generate:
  8. command: [sh, -c, 'echo "{\"kind\": \"ConfigMap\", \"apiVersion\": \"v1\", \"metadata\": { \"name\": \"$ARGOCD_APP_NAME\", \"namespace\": \"$ARGOCD_APP_NAMESPACE\", \"annotations\": {\"Foo\": \"$FOO\", \"KubeVersion\": \"$KUBE_VERSION\", \"KubeApiVersion\": \"$KUBE_API_VERSIONS\",\"Bar\": \"baz\"}}}"']
  9. discover:
  10. fileName: "./subdir/s*.yaml"
  11. allowConcurrency: true
  12. lockRepo: false

Note

While the ConfigManagementPlugin looks like a Kubernetes object, it is not actually a custom resource. It only follows kubernetes-style spec conventions.

The generate command must print a valid YAML stream to stdout. Both init and generate commands are executed inside the application source directory.

The discover.fileName is used as glob pattern to determine whether an application repository is supported by the plugin or not.

  1. discover:
  2. find:
  3. command: [sh, -c, find . -name env.yaml]

If discover.fileName is not provided, the discover.find.command is executed in order to determine whether an application repository is supported by the plugin or not. The find command should return a non-error exit code when the application source type is supported.

If your plugin makes use of git (e.g. git crypt), it is advised to set lockRepo to true so that your plugin will have exclusive access to the repository at the time it is executed. Otherwise, two applications synced at the same time may result in a race condition and sync failure.

2. Place the plugin configuration file in the sidecar

Argo CD expects the plugin configuration file to be located at /home/argocd/cmp-server/config/plugin.yaml in the sidecar.

If you use a custom image for the sidecar, you can add the file directly to that image.

If you use a stock image for the sidecar or would rather maintain the plugin configuration in a ConfigMap, just nest the plugin config file in a ConfigMap under the plugin.yaml key.

  1. apiVersion: v1
  2. kind: ConfigMap
  3. metadata:
  4. name: cmp-plugin
  5. data:
  6. plugin.yaml: |
  7. apiVersion: argoproj.io/v1alpha1
  8. kind: ConfigManagementPlugin
  9. metadata:
  10. name: cmp-plugin
  11. spec:
  12. version: v1.0
  13. generate:
  14. command: [sh, -c, 'echo "{\"kind\": \"ConfigMap\", \"apiVersion\": \"v1\", \"metadata\": { \"name\": \"$ARGOCD_APP_NAME\", \"namespace\": \"$ARGOCD_APP_NAMESPACE\", \"annotations\": {\"Foo\": \"$FOO\", \"KubeVersion\": \"$KUBE_VERSION\", \"KubeApiVersion\": \"$KUBE_API_VERSIONS\",\"Bar\": \"baz\"}}}"']
  15. discover:
  16. fileName: "./subdir/s*.yaml"
  17. allowConcurrency: true
  18. lockRepo: false

3. Register the plugin sidecar

To install a plugin, patch argocd-repo-server to run the CMP container as a sidecar, with argocd-cmp-server as its entrypoint. You can use either off-the-shelf or custom-built plugin image as sidecar image. For example:

  1. containers:
  2. - name: cmp
  3. command: [/var/run/argocd/argocd-cmp-server] # Entrypoint should be Argo CD lightweight CMP server i.e. argocd-cmp-server
  4. image: busybox # This can be off-the-shelf or custom-built image
  5. securityContext:
  6. runAsNonRoot: true
  7. runAsUser: 999
  8. volumeMounts:
  9. - mountPath: /var/run/argocd
  10. name: var-files
  11. - mountPath: /home/argocd/cmp-server/plugins
  12. name: plugins
  13. - mountPath: /tmp
  14. name: tmp
  15. # Remove this volumeMount if you've chosen to bake the config file into the sidecar image.
  16. - mountPath: /home/argocd/cmp-server/config/plugin.yaml
  17. subPath: plugin.yaml
  18. name: cmp-plugin
  19. volumes:
  20. - configMap:
  21. name: cmp-plugin
  22. name: cmp-plugin

Double-check these items

  1. Make sure to use /var/run/argocd/argocd-cmp-server as an entrypoint. The argocd-cmp-server is a lightweight GRPC service that allows Argo CD to interact with the plugin.
  2. Make sure that sidecar container is running as user 999.
  3. Make sure that plugin configuration file is present at /home/argocd/cmp-server/config/plugin.yaml. It can either be volume mapped via configmap or baked into image.

Environment

CMP commands have access to

  1. The system environment variables
  2. Standard build environment
  3. Variables in the application spec (References to system and build variables will get interpolated in the variables’ values):

v1.2

  1. spec:
  2. source:
  3. plugin:
  4. env:
  5. - name: FOO
  6. value: bar
  7. - name: REV
  8. value: test-$ARGOCD_APP_REVISION

Using a CMP

If your CMP is defined in the argocd-cm ConfigMap, you can create a new Application using the CLI. Replace <pluginName> with the name configured in argocd-cm.

  1. argocd app create <appName> --config-management-plugin <pluginName>

If your CMP is defined as a sidecar, you must manually define the Application manifest. Do not configure a name field in the plugin section. The plugin will be automatically matched with the Application based on its discovery rules.

  1. apiVersion: argoproj.io/v1alpha1
  2. kind: Application
  3. metadata:
  4. name: guestbook
  5. namespace: argocd
  6. spec:
  7. project: default
  8. source:
  9. repoURL: https://github.com/argoproj/argocd-example-apps.git
  10. targetRevision: HEAD
  11. path: guestbook
  12. plugin:
  13. # For either argocd-cm- or sidecar-installed CMPs, you can pass environment variables to the CMP.
  14. env:
  15. - name: FOO
  16. value: bar

If you don’t need to set any environment variables, you can set an empty plugin section.

  1. plugin: {}

Important

If your sidecar CMP command runs too long, the command will be killed, and the UI will show an error. The CMP server respects the timeouts set by the server.repo.server.timeout.seconds and controller.repo.server.timeout.seconds items in argocd-cm. Increase their values from the default of 60s.

Each CMP command will also independently timeout on the ARGOCD_EXEC_TIMEOUT set for the CMP sidecar. The default is 90s. So if you increase the repo server timeout greater than 90s, be sure to set ARGOCD_EXEC_TIMEOUT on the sidecar.