Global Mesh Options

Configuration affecting the service mesh as a whole.

MeshConfig

MeshConfig defines mesh-wide settings for the Istio service mesh.

FieldTypeDescriptionRequired
proxyListenPortint32

Port on which Envoy should listen for incoming connections from other services. Default port is 15001.

No
proxyHttpPortint32

Port on which Envoy should listen for HTTP PROXY requests if set.

No
connectTimeoutDuration

Connection timeout used by Envoy. (MUST BE >=1ms) Default timeout is 10s.

No
protocolDetectionTimeoutDuration

Automatic protocol detection uses a set of heuristics to determine whether the connection is using TLS or not (on the server side), as well as the application protocol being used (e.g., http vs tcp). These heuristics rely on the client sending the first bits of data. For server first protocols like MySQL, MongoDB, etc. Envoy will timeout on the protocol detection after the specified period, defaulting to non mTLS plain TCP traffic. Set this field to tweak the period that Envoy will wait for the client to send the first bits of data. (MUST BE >=1ms or 0s to disable). Default detection timeout is 5s.

No
tcpKeepaliveTcpKeepalive

If set then set SOKEEPALIVE on the socket to enable TCP Keepalives.

No
ingressClassstring

Class of ingress resources to be processed by Istio ingress controller. This corresponds to the value of kubernetes.io/ingress.class annotation.

No
ingressServicestring

Name of the Kubernetes service used for the istio ingress controller. If no ingress controller is specified, the default value istio-ingressgateway is used.

No
ingressControllerModeIngressControllerMode

Defines whether to use Istio ingress controller for annotated or all ingress resources. Default mode is STRICT.

No
ingressSelectorstring

Defines which gateway deployment to use as the Ingress controller. This field corresponds to the Gateway.selector field, and will be set as istio: INGRESS_SELECTOR. By default, ingressgateway is used, which will select the default IngressGateway as it has the istio: ingressgateway labels. It is recommended that this is the same value as ingress_service.

No
enableTracingbool

Flag to control generation of trace spans and request IDs. Requires a trace span collector defined in the proxy configuration.

No
accessLogFilestring

File address for the proxy access log (e.g. /dev/stdout). Empty value disables access logging.

No
accessLogFormatstring

Format for the proxy access log Empty value results in proxy’s default access log format

No
accessLogEncodingAccessLogEncoding

Encoding for the proxy access log (TEXT or JSON). Default value is TEXT.

No
enableEnvoyAccessLogServicebool

This flag enables Envoy’s gRPC Access Log Service. See Access Log Service for details about Envoy’s gRPC Access Log Service API. Default value is false.

No
disableEnvoyListenerLogbool

This flag disables Envoy Listener logs. See Listener Access Log Istio Enables Envoy’s listener access logs on “NoRoute” response flag. Default value is false.

No
defaultConfigProxyConfig

Default proxy config used by gateway and sidecars. In case of Kubernetes, the proxy config is applied once during the injection process, and remain constant for the duration of the pod. The rest of the mesh config can be changed at runtime and config gets distributed dynamically. On Kubernetes, this can be overridden on individual pods with the proxy.istio.io/config annotation.

No
outboundTrafficPolicyOutboundTrafficPolicy

Set the default behavior of the sidecar for handling outbound traffic from the application. If your application uses one or more external services that are not known apriori, setting the policy to ALLOW_ANY will cause the sidecars to route any unknown traffic originating from the application to its requested destination. Users are strongly encouraged to use ServiceEntries to explicitly declare any external dependencies, instead of using ALLOW_ANY, so that traffic to these services can be monitored. Can be overridden at a Sidecar level by setting the OutboundTrafficPolicy in the Sidecar API. Default mode is ALLOW_ANY which means outbound traffic to unknown destinations will be allowed.

No
configSourcesConfigSource[]

ConfigSource describes a source of configuration data for networking rules, and other Istio configuration artifacts. Multiple data sources can be configured for a single control plane.

No
enableAutoMtlsBoolValue

This flag is used to enable mutual TLS automatically for service to service communication within the mesh, default true. If set to true, and a given service does not have a corresponding DestinationRule configured, or its DestinationRule does not have ClientTLSSettings specified, Istio configures client side TLS configuration appropriately. More specifically, If the upstream authentication policy is in STRICT mode, use Istio provisioned certificate for mutual TLS to connect to upstream. If upstream service is in plain text mode, use plain text. If the upstream authentication policy is in PERMISSIVE mode, Istio configures clients to use mutual TLS when server sides are capable of accepting mutual TLS traffic. If service DestinationRule exists and has ClientTLSSettings specified, that is always used instead.

No
trustDomainstring

The trust domain corresponds to the trust root of a system. Refer to SPIFFE-ID

No
trustDomainAliasesstring[]

The trust domain aliases represent the aliases of trust_domain. For example, if we have

  1. trustDomain: td1
  2. trustDomainAliases: [“td2”, td3”]

Any service with the identity td1/ns/foo/sa/a-service-account, td2/ns/foo/sa/a-service-account, or td3/ns/foo/sa/a-service-account will be treated the same in the Istio mesh.

No
caCertificatesCertificateData[]

The extra root certificates for workload-to-workload communication. The plugin certificates (the ‘cacerts’ secret) or self-signed certificates (the ‘istio-ca-secret’ secret) are automatically added by Istiod. The CA certificate that signs the workload certificates is automatically added by Istio Agent.

No
defaultServiceExportTostring[]

The default value for the ServiceEntry.export_to field and services imported through container registry integrations, e.g. this applies to Kubernetes Service resources. The value is a list of namespace names and reserved namespace aliases. The allowed namespace aliases are:

  1. - All Namespaces
  2. . - Current Namespace
  3. ~ - No Namespace

If not set the system will use “” as the default value which implies that services are exported to all namespaces.

All namespaces is a reasonable default for implementations that don’t need to restrict access or visibility of services across namespace boundaries. If that requirement is present it is generally good practice to make the default Current namespace so that services are only visible within their own namespaces by default. Operators can then expand the visibility of services to other namespaces as needed. Use of No Namespace is expected to be rare but can have utility for deployments where dependency management needs to be precise even within the scope of a single namespace.

For further discussion see the reference documentation for ServiceEntry, Sidecar, and Gateway.

No
defaultVirtualServiceExportTostring[]

The default value for the VirtualService.export_to field. Has the same syntax as default_service_export_to.

If not set the system will use “” as the default value which implies that virtual services are exported to all namespaces

No
defaultDestinationRuleExportTostring[]

The default value for the DestinationRule.export_to field. Has the same syntax as default_service_export_to.

If not set the system will use “” as the default value which implies that destination rules are exported to all namespaces

No
rootNamespacestring

The namespace to treat as the administrative root namespace for Istio configuration. When processing a leaf namespace Istio will search for declarations in that namespace first and if none are found it will search in the root namespace. Any matching declaration found in the root namespace is processed as if it were declared in the leaf namespace.

The precise semantics of this processing are documented on each resource type.

No
localityLbSettingLocalityLoadBalancerSetting

Locality based load balancing distribution or failover settings.

No
dnsRefreshRateDuration

Configures DNS refresh rate for Envoy clusters of type STRICT_DNS Default refresh rate is 5s.

No
h2UpgradePolicyH2UpgradePolicy

Specify if http1.1 connections should be upgraded to http2 by default. if sidecar is installed on all pods in the mesh, then this should be set to UPGRADE. If one or more services or namespaces do not have sidecar(s), then this should be set to DO_NOT_UPGRADE. It can be enabled by destination using the destinationRule.trafficPolicy.connectionPool.http.h2UpgradePolicy override.

No
inboundClusterStatNamestring

Name to be used while emitting statistics for inbound clusters. The same pattern is used while computing stat prefix for network filters like TCP and Redis. By default, Istio emits statistics with the pattern inbound|<port>|<port-name>|<service-FQDN>. For example inbound|7443|grpc-reviews|reviews.prod.svc.cluster.local. This can be used to override that pattern.

A Pattern can be composed of various pre-defined variables. The following variables are supported.

  • %SERVICE% - Will be substituted with name of the service.
  • %SERVICE_FQDN% - Will be substituted with FQDN of the service.
  • %SERVICE_PORT% - Will be substituted with port of the service.
  • %SERVICE_PORT_NAME% - Will be substituted with port name of the service.

Following are some examples of supported patterns for reviews:

  • %SERVICE_FQDN%%SERVICEPORT% will use reviews.prod.svc.cluster.local_7443 as the stats name.
  • %SERVICE% will use reviews.prod as the stats name.
No
outboundClusterStatNamestring

Name to be used while emitting statistics for outbound clusters. The same pattern is used while computing stat prefix for network filters like TCP and Redis. By default, Istio emits statistics with the pattern outbound|<port>|<subsetname>|<service-FQDN>. For example outbound|8080|v2|reviews.prod.svc.cluster.local. This can be used to override that pattern.

A Pattern can be composed of various pre-defined variables. The following variables are supported.

  • %SERVICE% - Will be substituted with name of the service.
  • %SERVICE_FQDN% - Will be substituted with FQDN of the service.
  • %SERVICE_PORT% - Will be substituted with port of the service.
  • %SERVICE_PORT_NAME% - Will be substituted with port name of the service.
  • %SUBSET_NAME% - Will be substituted with subset.

Following are some examples of supported patterns for reviews:

  • %SERVICE_FQDN%%SERVICE_PORT% will use reviews.prod.svc.cluster.local_7443 as the stats name.
  • %SERVICE% will use reviews.prod as the stats name.
No
certificatesCertificate[]

Configure the provision of certificates.

No
thriftConfigThriftConfig

Set configuration for Thrift protocol

No
enablePrometheusMergeBoolValue

If enabled, Istio agent will merge metrics exposed by the application with metrics from Envoy and Istio agent. The sidecar injection will replace prometheus.io annotations present on the pod and redirect them towards Istio agent, which will then merge metrics of from the application with Istio metrics. This relies on the annotations prometheus.io/scrape, prometheus.io/port, and prometheus.io/path annotations. If you are running a separately managed Envoy with an Istio sidecar, this may cause issues, as the metrics will collide. In this case, it is recommended to disable aggregation on that deployment with the prometheus.istio.io/merge-metrics: “false” annotation. If not specified, this will be enabled by default.

No
verifyCertificateAtClientBoolValue

VerifyCertificateAtClient sets the mesh global default for peer certificate validation at the client-side proxy when SIMPLE TLS or MUTUAL TLS (non ISTIO_MUTUAL) origination modes are used. This setting can be overridden at the host level via DestinationRule API. By default, VerifyCertificateAtClient is true.

CaCertificates: If set, proxy verifies CA signature based on given CaCertificates. If unset, and VerifyCertificateAtClient is true, proxy uses default System CA bundle. If unset and VerifyCertificateAtClient is false, proxy will not verify the CA.

SubjectAltNames: If set, proxy verifies subject alt names are present in the SAN. If unset, and VerifyCertificateAtClient is true, proxy uses host in destination rule to verify the SANs. If unset, and VerifyCertificateAtClient is false, proxy does not verify SANs.

For SAN, client-side proxy will exact match host in DestinationRule as well as one level wildcard if the specified host in DestinationRule doesn’t contain a wildcard. For example, if the host in DestinationRule is x.y.com, client-side proxy will match either x.y.com or .y.com for the SAN in the presented server certificate. For wildcard host name in DestinationRule, client-side proxy will do a suffix match. For example, if host is .x.y.com, client-side proxy will verify the presented server certificate SAN matches `.x.y.com suffix.

No
extensionProvidersExtensionProvider[]

Defines a list of extension providers that extend Istio’s functionality. For example, the AuthorizationPolicy can be used with an extension provider to delegate the authorization decision to a custom authorization system.

No

ConfigSource

ConfigSource describes information about a configuration store inside a mesh. A single control plane instance can interact with one or more data sources.

FieldTypeDescriptionRequired
addressstring

Address of the server implementing the Istio Mesh Configuration protocol (MCP). Can be IP address or a fully qualified DNS name. Use fs:/// to specify a file-based backend with absolute path to the directory.

No
tlsSettingsClientTLSSettings

Use the tls_settings to specify the tls mode to use. If the MCP server uses Istio mutual TLS and shares the root CA with Pilot, specify the TLS mode as ISTIO_MUTUAL.

No
subscribedResourcesResource[]

Describes the source of configuration, if nothing is specified default is MCP

No

Certificate

Certificate configures the provision of a certificate and its key. Example 1: key and cert stored in a secret

  1. { secretName: galley-cert
  2. secretNamespace: istio-system
  3. dnsNames:
  4. - galley.istio-system.svc
  5. - galley.mydomain.com
  6. }

Example 2: key and cert stored in a directory

  1. { dnsNames:
  2. - pilot.istio-system
  3. - pilot.istio-system.svc
  4. - pilot.mydomain.com
  5. }
FieldTypeDescriptionRequired
secretNamestring

Name of the secret the certificate and its key will be stored into. If it is empty, it will not be stored into a secret. Instead, the certificate and its key will be stored into a hard-coded directory.

No
dnsNamesstring[]

The DNS names for the certificate. A certificate may contain multiple DNS names.

No

MeshConfig.OutboundTrafficPolicy

FieldTypeDescriptionRequired
modeModeNo

MeshConfig.CertificateData

FieldTypeDescriptionRequired
pemstring (oneof)

The PEM data of the certificate.

No
spiffeBundleUrlstring (oneof)

The SPIFFE bundle endpoint URL that complies to: https://github.com/spiffe/spiffe/blob/master/standards/SPIFFETrustDomainandBundle.md#the-spiffe-trust-domain-and-bundle The endpoint should support authentication based on Web PKI: https://github.com/spiffe/spiffe/blob/master/standards/SPIFFETrustDomainandBundle.md#521-web-pki The certificate is retrieved from the endpoint.

No

MeshConfig.ThriftConfig

FieldTypeDescriptionRequired
rateLimitUrlstring

Specify thrift rate limit service URL. If pilot has thrift protocol support enabled, this will enable the rate limit service for destinations that have matching rate limit configurations.

No
rateLimitTimeoutDuration

Specify thrift rate limit service timeout, in milliseconds. Default is 50ms

No

MeshConfig.CA

FieldTypeDescriptionRequired
addressstring

REQUIRED. Address of the CA server implementing the Istio CA gRPC API. Can be IP address or a fully qualified DNS name with port Eg: custom-ca.default.svc.cluster.local:8932, 192.168.23.2:9000

No
tlsSettingsClientTLSSettings

Use the tlssettings to specify the tls mode to use. Regarding tlssettings: - DISABLE MODE is legitimate for the case Istiod is making the request via an Envoy sidecar. DISABLE MODE can also be used for testing - TLS MUTUAL MODE be on by default. If the CA certificates (cert bundle to verify the CA server’s certificate) is omitted, Istiod will use the system root certs to verify the CA server’s certificate.

No
requestTimeoutDuration

timeout for forward CSR requests from Istiod to External CA Default: 10s

No
istiodSidebool

Use istiod_side to specify CA Server integrate to Istiod side or Agent side Default: true

No

MeshConfig.ExtensionProvider

FieldTypeDescriptionRequired
namestring

REQUIRED. A unique name identifying the extension provider.

No
envoyExtAuthzHttpEnvoyExternalAuthorizationHttpProvider (oneof)

Configures an external authorizer that implements the Envoy ext_authz filter authorization check service using the HTTP API.

No
envoyExtAuthzGrpcEnvoyExternalAuthorizationGrpcProvider (oneof)

Configures an external authorizer that implements the Envoy ext_authz filter authorization check service using the gRPC API.

No

MeshConfig.ServiceSettings.Settings

Settings for the selected services.

FieldTypeDescriptionRequired
clusterLocalbool

If true, specifies that the client and service endpoints must reside in the same cluster. By default, in multi-cluster deployments, the Istio control plane assumes all service endpoints to be reachable from any client in any of the clusters which are part of the mesh. This configuration option limits the set of service endpoints visible to a client to be cluster scoped.

There are some common scenarios when this can be useful:

  • A service (or group of services) is inherently local to the cluster and has local storage for that cluster. For example, the kube-system namespace (e.g. the Kube API Server).
  • A mesh administrator wants to slowly migrate services to Istio. They might start by first having services cluster-local and then slowly transition them to mesh-wide. They could do this service-by-service (e.g. mysvc.myns.svc.cluster.local) or as a group (e.g. *.myns.svc.cluster.local).

By default, Istio will consider all services in the kube-system namespace to be cluster-local, unless explicitly overridden here.

No

MeshConfig.ExtensionProvider.EnvoyExternalAuthorizationHttpProvider

FieldTypeDescriptionRequired
servicestring

REQUIRED. Specifies the service that implements the Envoy ext_authz HTTP authorization service. The format is “[/]”. The specification of is required only when it is insufficient to unambiguously resolve a service in the service registry. The is a fully qualified host name of a service defined by the Kubernetes service or ServiceEntry.

Example: “my-ext-authz.foo.svc.cluster.local” or “bar/my-ext-authz.example.com”.

No
portuint32

REQUIRED. Specifies the port of the service.

No
pathPrefixstring

Sets a prefix to the value of authorization request header Path. For example, setting this to “/check” for an original user request at path “/admin” will cause the authorization check request to be sent to the authorization service at the path “/check/admin” instead of “/admin”.

No
failOpenbool

If true, the user request will be allowed even if the communication with the authorization service has failed, or if the authorization service has returned a HTTP 5xx error. Default is false and the request will be rejected with “Forbidden” response.

No
statusOnErrorstring

Sets the HTTP status that is returned to the client when there is a network error to the authorization service. The default status is “403” (HTTP Forbidden).

No
includeHeadersInCheckstring[]

List of headers that should be included in the authorization request sent to the authorization service. Note that in addition to the headers supplied by users: 1. Host, Method, Path and Content-Length are automatically sent. 2. Content-Length will be set to 0 and the request will not have a message body.

No
headersToUpstreamOnAllowstring[]

List of headers from the authorization service that should be added or overridden in the original request and forwarded to the upstream when the authorization check result is allowed (HTTP code 200). If not specified, the original request will not be modified and forwarded to backend as-is. Note, any existing headers will be overridden.

No
headersToDownstreamOnDenystring[]

List of headers from the authorization service that should be forwarded to downstream when the authorization check result is not allowed (HTTP code other than 200). If not specified, all the authorization response headers, except Authority (Host) will be in the response to the downstream. When a header is included in this list, Path, Status, Content-Length, WWWAuthenticate and Location are automatically added. Note, the body from the authorization service is always included in the response to downstream.

No

MeshConfig.ExtensionProvider.EnvoyExternalAuthorizationGrpcProvider

FieldTypeDescriptionRequired
servicestring

REQUIRED. Specifies the service that implements the Envoy ext_authz gRPC authorization service. The format is “[/]”. The specification of is required only when it is insufficient to unambiguously resolve a service in the service registry. The is a fully qualified host name of a service defined by the Kubernetes service or ServiceEntry.

Example: “my-ext-authz.foo.svc.cluster.local” or “bar/my-ext-authz.example.com”.

No
portuint32

REQUIRED. Specifies the port of the service.

No
failOpenbool

If true, the user request will be allowed even if the communication with the authorization service has failed, or if the authorization service has returned a HTTP 5xx error. Default is false and the request will be rejected with “Forbidden” response.

No
statusOnErrorstring

Sets the HTTP status that is returned to the client when there is a network error to the authorization service. The default status is “403” (HTTP Forbidden).

No

Tracing

Tracing defines configuration for the tracing performed by Envoy instances.

FieldTypeDescriptionRequired
zipkinZipkin (oneof)

Use a Zipkin tracer.

No
lightstepLightstep (oneof)

Use a Lightstep tracer.

No
datadogDatadog (oneof)

Use a Datadog tracer.

No
stackdriverStackdriver (oneof)

Use a Stackdriver tracer.

No
openCensusAgentOpenCensusAgent (oneof)

Use an OpenCensus tracer exporting to an OpenCensus agent.

No
samplingdouble

The percentage of requests (0.0 - 100.0) that will be randomly selected for trace generation, if not requested by the client or not forced. Default is 1.0.

No
tlsSettingsClientTLSSettings

Use the tls_settings to specify the tls mode to use. If the remote tracing service uses Istio mutual TLS and shares the root CA with Pilot, specify the TLS mode as ISTIO_MUTUAL.

No

SDS

SDS defines secret discovery service(SDS) configuration to be used by the proxy. For workload, its values are set in sidecar injector(passed as arguments to istio-proxy container). For pilot/mixer, it’s passed as arguments to istio-proxy container in pilot/mixer deployment yaml files directly.

FieldTypeDescriptionRequired
enabledbool

True if SDS is enabled.

No
k8sSaJwtPathstring

Path of k8s service account JWT path.

No

ProxyConfig

ProxyConfig defines variables for individual Envoy instances.

FieldTypeDescriptionRequired
configPathstring

Path to the generated configuration file directory. Proxy agent generates the actual configuration and stores it in this directory.

No
binaryPathstring

Path to the proxy binary

No
serviceClusterstring

Service cluster defines the name for the servicecluster that is shared by all Envoy instances. This setting corresponds to —service-cluster flag in Envoy. In a typical Envoy deployment, the service-cluster flag is used to identify the caller, for source-based routing scenarios.

Since Istio does not assign a local service/service version to each Envoy instance, the name is same for all of them. However, the source/caller’s identity (e.g., IP address) is encoded in the —service-node flag when launching Envoy. When the RDS service receives API calls from Envoy, it uses the value of the service-node flag to compute routes that are relative to the service instances located at that IP address.

No
drainDurationDuration

The time in seconds that Envoy will drain connections during a hot restart. MUST be >=1s (e.g., 1s/1m/1h) Default drain duration is 45s.

No
parentShutdownDurationDuration

The time in seconds that Envoy will wait before shutting down the parent process during a hot restart. MUST be >=1s (e.g., 1s/1m/1h). MUST BE greater than drain_duration parameter. Default shutdown duration is 60s.

No
discoveryAddressstring

Address of the discovery service exposing xDS with mTLS connection. The inject configuration may override this value.

No
statsdUdpAddressstring

IP Address and Port of a statsd UDP listener (e.g. 10.75.241.127:9125).

No
proxyAdminPortint32

Port on which Envoy should listen for administrative commands. Default port is 15000.

No
controlPlaneAuthPolicyAuthenticationPolicy

AuthenticationPolicy defines how the proxy is authenticated when it connects to the control plane. Default is set to MUTUAL_TLS.

No
customConfigFilestring

File path of custom proxy configuration, currently used by proxies in front of Mixer and Pilot.

No
statNameLengthint32

Maximum length of name field in Envoy’s metrics. The length of the name field is determined by the length of a name field in a service and the set of labels that comprise a particular version of the service. The default value is set to 189 characters. Envoy’s internal metrics take up 67 characters, for a total of 256 character name per metric. Increase the value of this field if you find that the metrics from Envoys are truncated.

No
concurrencyInt32Value

The number of worker threads to run. If unset, this will be automatically determined based on CPU requests/limits. If set to 0, all cores on the machine will be used. Default is 2 worker threads.

No
proxyBootstrapTemplatePathstring

Path to the proxy bootstrap template file

No
interceptionModeInboundInterceptionMode

The mode used to redirect inbound traffic to Envoy.

No
tracingTracing

Tracing configuration to be used by the proxy.

No
sdsSDS

Secret Discovery Service(SDS) configuration to be used by the proxy.

No
envoyAccessLogServiceRemoteService

Address of the service to which access logs from Envoys should be sent. (e.g. accesslog-service:15000). See Access Log Service for details about Envoy’s gRPC Access Log Service API.

No
envoyMetricsServiceRemoteService

Address of the Envoy Metrics Service implementation (e.g. metrics-service:15000). See Metric Service for details about Envoy’s Metrics Service API.

No
proxyMetadatamap<string, string>

Additional environment variables for the proxy. Names starting with ISTIO_META will be included in the generated bootstrap and sent to the XDS server.

No
statusPortint32

Port on which the agent should listen for administrative commands such as readiness probe. Default is set to port 15020.

No
extraStatTagsstring[]

An additional list of tags to extract from the in-proxy Istio telemetry. These extra tags can be added by configuring the telemetry extension. Each additional tag needs to be present in this list. Extra tags emitted by the telemetry extensions must be listed here so that they can be processed and exposed as Prometheus metrics.

No
terminationDrainDurationDuration

The amount of time allowed for connections to complete on proxy shutdown. On receiving SIGTERM or SIGINT, istio-agent tells the active Envoy to start draining, preventing any new connections and allowing existing connections to complete. It then sleeps for the termination_drain_duration and then kills any remaining active Envoy processes. If not set, a default of 5s will be applied.

No
meshIdstring

The unique identifier for the service mesh All control planes running in the same service mesh should specify the same mesh ID. Mesh ID is used to label telemetry reports for cases where telemetry from multiple meshes is mixed together.

No
readinessProbeReadinessProbe

VM Health Checking readiness probe. This health check config exactly mirrors the kubernetes readiness probe configuration both in schema and logic. Only one health check method of 3 can be set at a time.

No
proxyStatsMatcherProxyStatsMatcher

Proxy stats matcher defines configuration for reporting custom Envoy stats. To reduce memory and CPU overhead from Envoy stats system, Istio proxies by default create and expose only a subset of Envoy stats. This option is to control creation of additional Envoy stats with prefix, suffix, and regex expressions match on the name of the stats. This replaces the stats inclusion annotations (sidecar.istio.io/statsInclusionPrefixes, sidecar.istio.io/statsInclusionRegexps, and sidecar.istio.io/statsInclusionSuffixes). For example, to enable stats for circuit breaker, retry, and upstream connections, you can specify stats matcher as follow:

  1. proxyStatsMatcher:
  2. inclusionRegexps:
  3. - .circuit_breakers.
  4. inclusionPrefixes:
  5. - upstream_rq_retry
  6. - upstream_cx

Note including more Envoy stats might increase number of time series collected by prometheus significantly. Care needs to be taken on Prometheus resource provision and configuration to reduce cardinality.

No
holdApplicationUntilProxyStartsBoolValue

Boolean flag for enabling/disabling the holdApplicationUntilProxyStarts behavior. This feature adds hooks to delay application startup until the pod proxy is ready to accept traffic, mitigating some startup race conditions. Default value is ‘false’.

No
caCertificatesPemstring[]

The PEM data of the extra root certificates for workload-to-workload communication. This includes the certificates defined in MeshConfig and any other certificates that Istiod uses as CA. The plugin certificates (the ‘cacerts’ secret), self-signed certificates (the ‘istio-ca-secret’ secret) are added automatically by Istiod.

No
zipkinAddressstring

Address of the Zipkin service (e.g. zipkin:9411). DEPRECATED: Use tracing instead.

No

RemoteService

FieldTypeDescriptionRequired
addressstring

Address of a remove service used for various purposes (access log receiver, metrics receiver, etc.). Can be IP address or a fully qualified DNS name.

No
tlsSettingsClientTLSSettings

Use the tls_settings to specify the tls mode to use. If the remote service uses Istio mutual TLS and shares the root CA with Pilot, specify the TLS mode as ISTIO_MUTUAL.

No
tcpKeepaliveTcpKeepalive

If set then set SO_KEEPALIVE on the socket to enable TCP Keepalives.

No

Tracing.Zipkin

Zipkin defines configuration for a Zipkin tracer.

FieldTypeDescriptionRequired
addressstring

Address of the Zipkin service (e.g. zipkin:9411).

No

Tracing.Lightstep

Defines configuration for a Lightstep tracer.

FieldTypeDescriptionRequired
addressstring

Address of the Lightstep Satellite pool.

No
accessTokenstring

The Lightstep access token.

No

Tracing.Datadog

Datadog defines configuration for a Datadog tracer.

FieldTypeDescriptionRequired
addressstring

Address of the Datadog Agent.

No

Tracing.Stackdriver

Stackdriver defines configuration for a Stackdriver tracer. See Envoy’s OpenCensus trace configuration and OpenCensus trace config for details.

FieldTypeDescriptionRequired

Tracing.OpenCensusAgent

OpenCensusAgent defines configuration for an OpenCensus tracer writing to an OpenCensus agent backend. See Envoy’s OpenCensus trace configuration and OpenCensus trace config for details.

FieldTypeDescriptionRequired
addressstring

gRPC address for the OpenCensus agent (e.g. dns://authority/host:port or unix:path). See gRPC naming docs for details.

No
contextTraceContext[]

Specifies the set of context propagation headers used for distributed tracing. Default is [“W3C_TRACE_CONTEXT”]. If multiple values are specified, the proxy will attempt to read each header for each request and will write all headers.

No

ProxyConfig.ProxyStatsMatcher

Proxy stats name matchers for stats creation. Note this is in addition to the minimum Envoy stats that Istio generates by default.

FieldTypeDescriptionRequired
inclusionPrefixesstring[]

Proxy stats name prefix matcher for inclusion.

No
inclusionSuffixesstring[]

Proxy stats name suffix matcher for inclusion.

No
inclusionRegexpsstring[]

Proxy stats name regexps matcher for inclusion.

No

Network

Network provides information about the endpoints in a routable L3 network. A single routable L3 network can have one or more service registries. Note that the network has no relation to the locality of the endpoint. The endpoint locality will be obtained from the service registry.

FieldTypeDescriptionRequired
endpointsNetworkEndpoints[]

The list of endpoints in the network (obtained through the constituent service registries or from CIDR ranges). All endpoints in the network are directly accessible to one another.

Yes
gatewaysIstioNetworkGateway[]

Set of gateways associated with the network.

Yes

MeshNetworks

MeshNetworks (config map) provides information about the set of networks inside a mesh and how to route to endpoints in each network. For example

MeshNetworks(file/config map):

  1. networks:
  2. network1:
  3. - endpoints:
  4. - fromRegistry: registry1 #must match kubeconfig name in Kubernetes secret
  5. - fromCidr: 192.168.100.0/22 #a VM network for example
  6. gateways:
  7. - registryServiceName: istio-ingressgateway.istio-system.svc.cluster.local
  8. port: 15443
  9. locality: us-east-1a
  10. - address: 192.168.100.1
  11. port: 15443
  12. locality: us-east-1a
FieldTypeDescriptionRequired
networksmap<string, Network>

The set of networks inside this mesh. Each network should have a unique name and information about how to infer the endpoints in the network as well as the gateways associated with the network.

Yes

Network.NetworkEndpoints

NetworkEndpoints describes how the network associated with an endpoint should be inferred. An endpoint will be assigned to a network based on the following rules:

  1. Implicitly: If the registry explicitly provides information about the network to which the endpoint belongs to. In some cases, its possible to indicate the network associated with the endpoint by adding the ISTIO_META_NETWORK environment variable to the sidecar.

  2. Explicitly:

a. By matching the registry name with one of the “fromRegistry” in the mesh config. A “from_registry” can only be assigned to a single network.

b. By matching the IP against one of the CIDR ranges in a mesh config network. The CIDR ranges must not overlap and be assigned to a single network.

(2) will override (1) if both are present.

FieldTypeDescriptionRequired
fromCidrstring (oneof)

A CIDR range for the set of endpoints in this network. The CIDR ranges for endpoints from different networks must not overlap.

No
fromRegistrystring (oneof)

Add all endpoints from the specified registry into this network. The names of the registries should correspond to the kubeconfig file name inside the secret that was used to configure the registry (Kubernetes multicluster) or supplied by MCP server.

No

Network.IstioNetworkGateway

The gateway associated with this network. Traffic from remote networks will arrive at the specified gateway:port. All incoming traffic must use mTLS.

FieldTypeDescriptionRequired
registryServiceNamestring (oneof)

A fully qualified domain name of the gateway service. Pilot will lookup the service from the service registries in the network and obtain the endpoint IPs of the gateway from the service registry. Note that while the service name is a fully qualified domain name, it need not be resolvable outside the orchestration platform for the registry. e.g., this could be istio-ingressgateway.istio-system.svc.cluster.local.

No
addressstring (oneof)

IP address or externally resolvable DNS address associated with the gateway.

No
portuint32

The port associated with the gateway.

Yes
localitystring

The locality associated with an explicitly specified gateway (i.e. ip)

No

MeshConfig.OutboundTrafficPolicy.Mode

NameDescription
REGISTRY_ONLY

outbound traffic will be restricted to services defined in the service registry as well as those defined through ServiceEntries

ALLOW_ANY

outbound traffic to unknown destinations will be allowed, in case there are no services or ServiceEntries for the destination port

MeshConfig.IngressControllerMode

NameDescription
UNSPECIFIED

Unspecified Istio ingress controller.

OFF

Disables Istio ingress controller.

DEFAULT

Istio ingress controller will act on ingress resources that do not contain any annotation or whose annotations match the value specified in the ingress_class parameter described earlier. Use this mode if Istio ingress controller will be the default ingress controller for the entire Kubernetes cluster.

STRICT

Istio ingress controller will only act on ingress resources whose annotations match the value specified in the ingress_class parameter described earlier. Use this mode if Istio ingress controller will be a secondary ingress controller (e.g., in addition to a cloud-provided ingress controller).

MeshConfig.AccessLogEncoding

NameDescription
TEXT

text encoding for the proxy access log

JSON

json encoding for the proxy access log

MeshConfig.H2UpgradePolicy

Default Policy for upgrading http1.1 connections to http2.

NameDescription
DO_NOT_UPGRADE

Do not upgrade connections to http2.

UPGRADE

Upgrade the connections to http2.

Resource

Resource describes the source of configuration

NameDescription
SERVICE_REGISTRY

Set to only receive service entries that are generated by the platform. These auto generated service entries are combination of services and endpoints that are generated by a specific platform e.g. k8

Tracing.OpenCensusAgent.TraceContext

TraceContext selects the context propagation headers used for distributed tracing.

NameDescription
W3C_TRACE_CONTEXT

Use W3C Trace Context propagation using the traceparent HTTP header. See the Trace Context documentation for details.

GRPC_BIN

Use gRPC binary context propagation using the grpc-trace-bin http header.

CLOUD_TRACE_CONTEXT

Use Cloud Trace context propagation using the X-Cloud-Trace-Context http header.

B3

Use multi-header B3 context propagation using the X-B3-TraceId, X-B3-SpanId, and X-B3-Sampled HTTP headers. See B3 header propagation README for details.

ProxyConfig.InboundInterceptionMode

The mode used to redirect inbound traffic to Envoy. This setting has no effect on outbound traffic: iptables REDIRECT is always used for outbound connections.

NameDescription
REDIRECT

The REDIRECT mode uses iptables REDIRECT to NAT and redirect to Envoy. This mode loses source IP addresses during redirection.

TPROXY

The TPROXY mode uses iptables TPROXY to redirect to Envoy. This mode preserves both the source and destination IP addresses and ports, so that they can be used for advanced filtering and manipulation. This mode also configures the sidecar to run with the CAP_NET_ADMIN capability, which is required to use TPROXY.

AuthenticationPolicy

AuthenticationPolicy defines how the proxy is authenticated when it connects to the control plane. It can be set for two different scopes, mesh-wide or set on a per-pod basis using the ProxyConfig annotation. Mesh policy cannot be INHERIT.

NameDescription
NONE

Do not encrypt proxy to control plane traffic.

MUTUAL_TLS

Proxy to control plane traffic is wrapped into mutual TLS connections.

INHERIT

Use the policy defined by the parent scope. Should not be used for mesh policy.