完全用 GNU/Linux 工作

08. 電源管理 - PowerTOP

PowerTOP 是個分析、監控電力消秏的節能工具程式,它是由 Intel 於 2007 年以 GPLv2 授權釋出的開放原始碼專案。我們可以使用它找出 GNU/Linux 上秏電的套件,並透過停用不必要的功能以達到省電的效果,是筆記型電腦 (Laptop) 必裝的實用工具。

2013-09-25-powertop-01.png
▲ PowerTOP 的起始畫面。

開始前請先安裝 powertop。

  1. # Debian, Ubuntu
  2. $ sudo aptitude install powertop
  3. # CentOS, RHEL, Fedora
  4. $ sudo yum install powertop
  5. # Arch Linux
  6. $ sudo pacman -S powertop

請使用 Tab, Shift + Tab方向鍵 ←, → 切換至 Tunables 分頁 [^1],並使用 ↑, ↓ 上下移動,於欲調校的項目按下 Enter 進行調校,當所有狀態顯示為 Good 後即可按下 q 離開。

2013-09-25-powertop-02.png
▲ 調校前的 Tunables

2013-09-25-powertop-03.png
▲ 調校後的 Tunables

PowerTOP 本身並無儲存功能,但我們可以藉由 powertop '--html' 產生的報告來調校系統,甚至於開機時載入這些設定。

  1. $ sudo powertop --html
  2. Loaded 58 prior measurements
  3. Cannot load from file /var/cache/powertop/saved_parameters.powertop
  4. Preparing to take measurements
  5. Measuring 1 time(s) for 20 seconds each
  6. PowerTOP outputing using base filename powertop-20130915-231821.html

2013-09-25-powertop-04.png
▲ 此報告將依個人環境而有所不同,其各項目的詳細說明可參考 Power saving - ArchWiki 一文。

接著將調校的指令貼到一個 shell script 打包起來。

  1. $ sudo vi /usr/local/bin/powersave
  2. #!/bin/bash
  3. # PowerTop conifg for ThinkPad T410 on Debian Wheezy.
  4. # Wireless Power Saving for interface wlan0
  5. iw dev wlan0 set power_save off
  6. # Enable SATA link power management for /dev/sda
  7. echo 'min_power' > '/sys/class/scsi_host/host0/link_power_management_policy';
  8. # NMI watchdog should be turned off
  9. echo '0' > '/proc/sys/kernel/nmi_watchdog';
  10. # VM writeback timeout
  11. echo '1500' > '/proc/sys/vm/dirty_writeback_centisecs';
  12. # Enable Audio codec power management
  13. echo '1' > '/sys/module/snd_hda_intel/parameters/power_save';
  14. # Autosuspend for USB device Biometric Coprocessor [UPEK]
  15. echo 'auto' > '/sys/bus/usb/devices/1-1.3/power/control';
  16. # Runtime PM for PCI Device Ricoh Co Ltd MMC/SD Host Controller
  17. echo 'auto' > '/sys/bus/pci/devices/0000:0d:00.0/power/control';
  18. # Runtime PM for PCI Device Intel Corporation Core Processor PCI Express x16 Root Port
  19. echo 'auto' > '/sys/bus/pci/devices/0000:00:01.0/power/control';
  20. # Runtime PM for PCI Device Intel Corporation 82577LM Gigabit Network Connection
  21. echo 'auto' > '/sys/bus/pci/devices/0000:00:19.0/power/control';
  22. # Runtime PM for PCI Device Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
  23. echo 'auto' > '/sys/bus/pci/devices/0000:00:1a.0/power/control';
  24. # Runtime PM for PCI Device Intel Corporation 5 Series/3400 Series Chipset High Definition Audio
  25. echo 'auto' > '/sys/bus/pci/devices/0000:00:1b.0/power/control';
  26. # Runtime PM for PCI Device Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4
  27. echo 'auto' > '/sys/bus/pci/devices/0000:00:1c.3/power/control';
  28. # Runtime PM for PCI Device Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller
  29. echo 'auto' > '/sys/bus/pci/devices/0000:0d:00.3/power/control';
  30. # Runtime PM for PCI Device Intel Corporation Centrino Wireless-N 1000 [Condor Peak]
  31. echo 'auto' > '/sys/bus/pci/devices/0000:03:00.0/power/control';
  32. # Runtime PM for PCI Device Intel Corporation 5 Series/3400 Series Chipset SMBus Controller
  33. echo 'auto' > '/sys/bus/pci/devices/0000:00:1f.3/power/control';
  34. # Runtime PM for PCI Device Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem
  35. echo 'auto' > '/sys/bus/pci/devices/0000:00:1f.6/power/control';
  36. # Runtime PM for PCI Device Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller
  37. echo 'auto' > '/sys/bus/pci/devices/0000:00:1f.2/power/control';
  38. # Runtime PM for PCI Device NVIDIA Corporation GT218 [NVS 3100M]
  39. echo 'auto' > '/sys/bus/pci/devices/0000:01:00.0/power/control';
  40. # Runtime PM for PCI Device Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
  41. echo 'auto' > '/sys/bus/pci/devices/0000:00:1d.0/power/control';
  42. # Runtime PM for PCI Device Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1
  43. echo 'auto' > '/sys/bus/pci/devices/0000:00:1c.0/power/control';
  44. # Runtime PM for PCI Device Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5
  45. echo 'auto' > '/sys/bus/pci/devices/0000:00:1c.4/power/control';
  46. # Runtime PM for PCI Device NVIDIA Corporation High Definition Audio Controller
  47. echo 'auto' > '/sys/bus/pci/devices/0000:01:00.1/power/control';
  48. # Runtime PM for PCI Device Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2
  49. echo 'auto' > '/sys/bus/pci/devices/0000:00:1c.1/power/control';
  50. # Wake-on-lan status for device eth0
  51. #ethtool -s eth0 wol d;

給予執行權限。

  1. $ sudo chmod +x /usr/local/bin/powersave

因調校指令皆需管理者權限才可執行,若想省下打密碼的功夫可參考 Firestarter 開機甭再次輸入密碼 一文修改。

  1. $ sudo visudo
  2. ......
  3. jonny ALL= NOPASSWD:/usr/local/bin/powersave

現在開機時只需使用 sudo powersave 即可手動切換至省電模式

若想加入開機自動啟動可以參考 安裝 indicator-virtualbox on Ubuntu 12.04 | 4. 加入開機自動啟動 一文或使用較進階的 udevsysctl

※ 註:請依個人需求自行調整,若造成系統不穩還請自行斟酌。

資料來源

[^1]: 感謝 theJian 回報,powertop v2.5 之後切換 Tunables 分頁的功能鍵已從方向鍵 ←, → 改為 TabShift + Tab