Configuration Reload

The system will perform a periodic check on the configuration files, configured by configuration-file-refresh-period, with the default at 5000, in milliseconds. These checks can be disabled by specifying -1.

Once the configuration file is changed (broker.xml) the following modules will be reloaded automatically:

  • Address Settings
  • Security Settings
  • Diverts
  • Addresses & queues

If using modulised broker.xml ensure you also read Reloading modular configuration files

Note:

Deletion of Address’s Queue’s and diverts not auto created is controlled by Address Settings

  • config-delete-addresses

    • OFF (DEFAULT) - will not remove upon config reload.
    • FORCE - will remove the address and its queues upon config reload, even if messages remains, losing the messages in the address & queues.
  • config-delete-queues

    • OFF (DEFAULT) - will not remove upon config reload.
    • FORCE - will remove the queue upon config reload, even if messages remains, losing the messages in the queue.
  • config-delete-diverts

    • OFF (DEFAULT) - will not remove upon config reload.
    • FORCE - will remove the queue upon config reload, even if messages remains, losing the messages in the queue.

By default both settings are OFF as such address & queues won’t be removed upon reload, given the risk of losing messages.

When OFF You may execute explicit CLI or Management operations to remove address & queues.

Reloadable Parameters

The broker configuration file has 2 main parts, <core> and <jms>. Some of the parameters in the 2 parts are monitored and, if modified, reloaded into the broker at runtime.

Note: Elements under <jms> are deprecated. Users are encouraged to use <core> configuration entities.

Note:

Most parameters reloaded take effect immediately after reloading. However there are some that won’t take any effect unless you restarting the broker. Such parameters are specifically indicated in the following text.

<core>

<security-settings>

  • <security-setting> element

Changes to any <security-setting> elements will be reloaded. Each <security-setting> defines security roles for a matched address.

  • The match attribute

    This attribute defines the address for which the security-setting is defined. It can take wildcards such as ‘#’ and ‘*’.

  • The <permission> sub-elements

Each <security-setting> can have a list of <permission> elements, each of which defines a specific permission-roles mapping. Each permission has 2 attributes ‘type’ and ‘roles’. The ‘type’ attribute defines the type of operation allowed, the ‘roles’ defines which roles are allowed to perform such operation. Refer to the user’s manual for a list of operations that can be defined.

Note:

Once loaded the security-settings will take effect immediately. Any new clients will subject to the new security settings. Any existing clients will subject to the new settings as well, as soon as they performs a new security-sensitive operation.

Below lists the effects of adding, deleting and updating of an element/attribute within the <security-settings> element, whether a change can be done or can’t be done.

OperationAddDeleteUpdate
<security-settings>X (at most one element is allowed)Deleting it means delete the whole security settings from the running broker.N/A
<security-setting>Adding one element means adding a new set of security roles for an address in the running brokerDeleting one element means removing a set of security roles for an address in the running brokerUpdating one element means updating the security roles for an address (if match attribute is not changed), or means removing the old match address settings and adding a new one (if match attribute is changed)
attribute matchN/AXChanging this value is same as deleting the whole with the old match value and adding
<permission>Adding one means adding a new permission definition to runtime brokerDeleting a permission from the runtime brokerUpdating a permission-roles in the runtime broker
attribute typeN/AXChanging the type value means remove the permission of the old one and add the permission of this type to the running broker.
attribute rolesN/AXChanging the ‘roles’ value means updating the permission’s allowed roles to the running broker
  • N/A means this operation is not applicable.
  • X means this operation is not allowed.

<address-settings>

  • <address-settings> element

Changes to elements under <address-settings> will be reloaded into runtime broker. It contains a list of <address-setting> elements.

  • <address-setting> element

    Each address-setting element has a ‘match’ attribute that defines an address pattern for which this address-setting is defined. It also has a list of sub-elements used to define the properties of a matching address.

    Note:

    Parameters reloaded in this category will take effect immediately after reloading. The effect of deletion of Address’s and Queue’s, not auto created is controlled by parameter config-delete-addresses and config-delete-queues as described in the doc.

Below lists the effects of adding, deleting and updating of an element/attribute within the address-settings element, whether a change can be done or can’t be done.

OperationAddDeleteUpdate
<address-settings>X(at most one element is allowed)Deleting it means delete the whole address settings from the running brokerN/A
<address-setting>Adding one element means adding a set of address-setting for a new address in the running brokerDeleting one means removing a set of address-setting for an address in the running brokerUpdating one element means updating the address setting for an address (if match attribute is not changed), or means removing the old match address settings and adding a new one (if match attribute is changed)
attribute matchN/AXChanging this value is same as deleting the whole with the old match value and adding a new one with the new match value.
<dead-letter-address>X (no more than one can be present)Removing the configured dead-letter-address address from running broker.The dead letter address of the matching address will be updated after reloading
<expiry-address>X (no more than one can be present)Removing the configured expiry address from running broker.The expiry address of the matching address will be updated after reloading
<expiry-delay>X (no more than one can be present)The configured expiry-delay will be removed from running broker.The expiry-delay for the matching address will be updated after reloading.
<redelivery-delay>X (no more than one can be present)The configured redelivery-delay will be removed from running broker after reloadingThe redelivery-delay for the matchin address will be updated after reloading.
<redelivery-delay-multiplier>X (no more than one can be present)The configured redelivery-delay-multiplier will be removed from running broker after reloading.The redelivery-delay-multiplier will be updated after reloading.
<max-redelivery-delay>X (no more than one can be present)The configured max-redelivery-delay will be removed from running broker after reloading.The max-redelivery-delay will be updated after reloading.
<max-delivery-attempts>X (no more than one can be present)The configured max-delivery-attempts will be removed from running broker after reloading.The max-delivery-attempts will be updated after reloading.
<max-size-bytes>X (no more than one can be present)The configured max-size-bytes will be removed from running broker after reloading.The max-size-bytes will be updated after reloading.
<page-size-bytes>X (no more than one can be present)The configured page-size-bytes will be removed from running broker after reloading.The page-size-bytes will be updated after reloading.
<page-max-cache-size>X (no more than one can be present)The configured page-max-cache-size will be removed from running broker after reloading.The page-max-cache-size will be updated after reloading.
<address-full-policy>X (no more than one can be present)The configured address-full-policy will be removed from running broker after reloading.The address-full-policy will be updated after reloading.
<message-counter-history-day-limit>X (no more than one can be present)The configured message-counter-history-day-limit will be removed from running broker after reloading.The message-counter-history-day-limit will be updated after reloading.
<last-value-queue>X (no more than one can be present)The configured last-value-queue will be removed from running broker after reloading (no longer a last value queue).The last-value-queue will be updated after reloading.
<redistribution-delay>X (no more than one can be present)The configured redistribution-delay will be removed from running broker after reloading.The redistribution-delay will be updated after reloading.
<send-to-dla-on-no-route>X (no more than one can be present)The configured send-to-dla-on-no-route will be removed from running broker after reloading.The send-to-dla-on-no-route will be updated after reloading.
<slow-consumer-threshold>X (no more than one can be present)The configured slow-consumer-threshold will be removed from running broker after reloading.The slow-consumer-threshold will be updated after reloading.
<slow-consumer-policy>X (no more than one can be present)The configured slow-consumer-policy will be removed from running broker after reloading.The slow-consumer-policy will be updated after reloading.
<slow-consumer-check-period>X (no more than one can be present)The configured slow-consumer-check-period will be removed from running broker after reloading. (meaning the slow consumer checker thread will be cancelled)The slow-consumer-check-period will be updated after reloading.
<auto-create-queues>X (no more than one can be present)The configured auto-create-queues will be removed from running broker after reloading.The auto-create-queues will be updated after reloading.
<auto-delete-queues>X (no more than one can be present)The configured auto-delete-queues will be removed from running broker after reloading.The auto-delete-queues will be updated after reloading.
<config-delete-queues>X (no more than one can be present)The configured config-delete-queues will be removed from running broker after reloading.The config-delete-queues will be updated after reloading.
<auto-create-addresses>X (no more than one can be present)The configured auto-create-addresses will be removed from running broker after reloading.The auto-create-addresses will be updated after reloading.
<auto-delete-addresses>X (no more than one can be present)The configured auto-delete-addresses will be removed from running broker after reloading.The auto-delete-addresses will be updated after reloading.
<config-delete-addresses>X (no more than one can be present)The configured config-delete-addresses will be removed from running broker after reloading.The config-delete-addresses will be updated after reloading.
<management-browse-page-size>X (no more than one can be present)The configured management-browse-page-size will be removed from running broker after reloading.The management-browse-page-size will be updated after reloading.
<default-purge-on-no-consumers>X (no more than one can be present)The configured default-purge-on-no-consumers will be removed from running broker after reloading.The default-purge-on-no-consumers will be updated after reloading.
<default-max-consumers>X (no more than one can be present)The configured default-max-consumers will be removed from running broker after reloading.The default-max-consumers will be updated after reloading.
<default-queue-routing-type>X (no more than one can be present)The configured default-queue-routing-type will be removed from running broker after reloading.The default-queue-routing-type will be updated after reloading.
<default-address-routing-type>X (no more than one can be present)The configured default-address-routing-type will be removed from running broker after reloading.The default-address-routing-type will be updated after reloading.

<diverts>

All <divert> elements will be reloaded. Each <divert> element has a ‘name’ and several sub-elements that defines the properties of a divert.

Note:

Existing diverts get undeployed if you delete their <divert> element.

Below lists the effects of adding, deleting and updating of an element/attribute within the diverts element, whether a change can be done or can’t be done.

OperationAddDeleteUpdate
<diverts>X (no more than one can be present)Deleting it means delete (undeploy) all diverts in running broker.N/A
<divert>Adding a new divert. It will be deployed after reloadingDeleting it means the divert will be undeployed after reloadingNo effect on the deployed divert (unless restarting broker, in which case the divert will be redeployed)
attribute nameN/AXA new divert with the name will be deployed. (if it is not already there in broker). Otherwise no effect.
<transformer-class-name>X (no more than one can be present)No effect on the deployed divert.(unless restarting broker, in which case the divert will be deployed without the transformer class)No effect on the deployed divert.(unless restarting broker, in which case the divert has the transformer class)
<exclusive>X (no more than one can be present)No effect on the deployed divert.(unless restarting broker)No effect on the deployed divert.(unless restarting broker)
<routing-name>X (no more than one can be present)No effect on the deployed divert.(unless restarting broker)No effect on the deployed divert.(unless restarting broker)
<address>X (no more than one can be present)No effect on the deployed divert.(unless restarting broker)No effect on the deployed divert.(unless restarting broker)
<forwarding-address>X (no more than one can be present)No effect on the deployed divert.(unless restarting broker)No effect on the deployed divert.(unless restarting broker)
<filter>X (no more than one can be present)No effect on the deployed divert.(unless restarting broker)No effect on the deployed divert.(unless restarting broker)
<routing-type>X (no more than one can be present)No effect on the deployed divert.(unless restarting broker)No effect on the deployed divert.(unless restarting broker)

<addresses>

The <addresses> element contains a list <address> elements. Once changed, all <address> elements in <addresses> will be reloaded.

Note:

Once reloaded, all new addresses (as well as the pre-configured queues) will be deployed to the running broker and all those that are missing from the configuration will be undeployed.

Note:

Parameters reloaded in this category will take effect immediately after reloading. The effect of deletion of Address’s and Queue’s, not auto created is controlled by parameter config-delete-addresses and config-delete-queues as described in this doc.

Below lists the effects of adding, deleting and updating of an element/attribute within the <addresses> element, whether a change can be done or can’t be done.

OperationAddDeleteUpdate
<addresses>X(no more than one is present)Deleting it means delete (undeploy) all diverts in running broker.N/A
<address>A new address will be deployed in the running brokerThe corresponding address will be undeployed.N/A
attribute nameN/AXAfter reloading the address of the old name will be undeployed and the new will be deployed.
<anycast>X(no more than one is present)The anycast routing type will be undeployed from this address, as well as its containing queues after reloadingN/A
<queue>(under <anycast>)An anycast queue will be deployed after reloadingThe anycast queue will be undeployedFor updating queues please see next section <queues>
<multicast>X(no more than one is present)The multicast routing type will be undeployed from this address, as well as its containing queues after reloadingN/A
<queue>(under <multicast>)A multicast queue will be deployed after reloadingThe multicast queue will be undeployedFor updating queues please see next section <queues>

<queues>

The <queues> element contains a list <queue> elements. Once changed, all <queue> elements in <queues> will be reloaded.

Note:

Once reloaded, all new queues will be deployed to the running broker and all queues that are missing from the configuration will be undeployed.

Note:

Parameters reloaded in this category will take effect immediately after reloading. The effect of deletion of Address’s and Queue’s, not auto created is controlled by parameter config-delete-addresses and config-delete-queues as described in this doc.

Below lists the effects of adding, deleting and updating of an element/attribute within the <queues> element, and whether a change can be done or can’t be done.

OperationAddDeleteUpdate
<queues>X(no more than one is present)Deleting it means delete (undeploy) all queues from running broker.N/A
<queue>A new queue is deployed after reloadingThe queue will be undeployed after reloading.N/A
attribute nameN/AXA queue with new name will be deployed and the queue with old name will be updeployed after reloading (see Note above).
attribute max-consumersIf max-consumers > current consumers max-consumers will update on reloadmax-consumers will be set back to the default -1If max-consumers > current consumers max-consumers will update on reload
attribute purge-on-no-consumersOn reload purge-on-no-consumers will be updatedWill be set back to the default falseOn reload purge-on-no-consumers will be updated
attribute addressN/ANo effect unless starting brokerNo effect unless starting broker
attribute filterThe filter will be added after reloadingThe filter will be removed after reloadingThe filter will be updated after reloading
attribute durableThe queue durability will be set to the given value after reloadingThe queue durability will be set to the default true after reloadingThe queue durability will be set to the new value after reloading

<jms> (Deprecated)

<queue>

Changes to any <queue> elements will be reloaded to the running broker.

Note:

Once reloaded, new queues defined in the new changes will be deployed to the running broker. However existing queues won’t get undeployed even if the matching element is deleted/missing. Also new queue elements matching existing queues won’t get re-created – they remain unchanged.

OperationAddDeleteUpdate
<queue>A new jms queue will be deployed after reloadingNo effect unless starting brokerNo effect unless starting broker
attribute <name>N/AXA jms queue of the new name will be deployed after reloading
<selector>X(no more than one is present)No effect unless starting brokerNo effect unless starting broker
<durable>X(no more than one is present)No effect unless starting brokerNo effect unless starting broker

<topic>

Changes to any <topic> elements will be reloaded to the running broker.

Note:

Once reloaded, new topics defined in the new changes will be deployed to the running broker. However existing topics won’t get undeployed even if the matching element is deleted/missing. Also any <topic> elements matching existing topics won’t get re-deployed – they remain unchanged.

OperationAddDeleteUpdate
<topic>A new jms topic will be deployed after reloadingNo effect unless starting brokerNo effect unless starting broker
attribute nameN/AXA jms topic of the new name will be deployed after reloading