及时流处理

Introduction

Timely stream processing is an extension of stateful stream processing in which time plays some role in the computation. Among other things, this is the case when you do time series analysis, when doing aggregations based on certain time periods (typically called windows), or when you do event processing where the time when an event occurred is important.

In the following sections we will highlight some of the topics that you should consider when working with timely Flink Applications.

Notions of Time: Event Time and Processing Time

When referring to time in a streaming program (for example to define windows), one can refer to different notions of time:

  • Processing time: Processing time refers to the system time of the machine that is executing the respective operation.

    When a streaming program runs on processing time, all time-based operations (like time windows) will use the system clock of the machines that run the respective operator. An hourly processing time window will include all records that arrived at a specific operator between the times when the system clock indicated the full hour. For example, if an application begins running at 9:15am, the first hourly processing time window will include events processed between 9:15am and 10:00am, the next window will include events processed between 10:00am and 11:00am, and so on.

    Processing time is the simplest notion of time and requires no coordination between streams and machines. It provides the best performance and the lowest latency. However, in distributed and asynchronous environments processing time does not provide determinism, because it is susceptible to the speed at which records arrive in the system (for example from the message queue), to the speed at which the records flow between operators inside the system, and to outages (scheduled, or otherwise).

  • Event time: Event time is the time that each individual event occurred on its producing device. This time is typically embedded within the records before they enter Flink, and that event timestamp can be extracted from each record. In event time, the progress of time depends on the data, not on any wall clocks. Event time programs must specify how to generate Event Time Watermarks, which is the mechanism that signals progress in event time. This watermarking mechanism is described in a later section, below.

    In a perfect world, event time processing would yield completely consistent and deterministic results, regardless of when events arrive, or their ordering. However, unless the events are known to arrive in-order (by timestamp), event time processing incurs some latency while waiting for out-of-order events. As it is only possible to wait for a finite period of time, this places a limit on how deterministic event time applications can be.

    Assuming all of the data has arrived, event time operations will behave as expected, and produce correct and consistent results even when working with out-of-order or late events, or when reprocessing historic data. For example, an hourly event time window will contain all records that carry an event timestamp that falls into that hour, regardless of the order in which they arrive, or when they are processed. (See the section on late events for more information.)

    Note that sometimes when event time programs are processing live data in real-time, they will use some processing time operations in order to guarantee that they are progressing in a timely fashion.

Event Time and Processing Time

Event Time and Watermarks

Note: Flink implements many techniques from the Dataflow Model. For a good introduction to event time and watermarks, have a look at the articles below.

A stream processor that supports event time needs a way to measure the progress of event time. For example, a window operator that builds hourly windows needs to be notified when event time has passed beyond the end of an hour, so that the operator can close the window in progress.

Event time can progress independently of processing time (measured by wall clocks). For example, in one program the current event time of an operator may trail slightly behind the processing time (accounting for a delay in receiving the events), while both proceed at the same speed. On the other hand, another streaming program might progress through weeks of event time with only a few seconds of processing, by fast-forwarding through some historic data already buffered in a Kafka topic (or another message queue).


The mechanism in Flink to measure progress in event time is watermarks. Watermarks flow as part of the data stream and carry a timestamp t. A Watermark(t) declares that event time has reached time t in that stream, meaning that there should be no more elements from the stream with a timestamp t’ <= t (i.e. events with timestamps older or equal to the watermark).

The figure below shows a stream of events with (logical) timestamps, and watermarks flowing inline. In this example the events are in order (with respect to their timestamps), meaning that the watermarks are simply periodic markers in the stream.

A data stream with events (in order) and watermarks

Watermarks are crucial for out-of-order streams, as illustrated below, where the events are not ordered by their timestamps. In general a watermark is a declaration that by that point in the stream, all events up to a certain timestamp should have arrived. Once a watermark reaches an operator, the operator can advance its internal event time clock to the value of the watermark.

A data stream with events (out of order) and watermarks

Note that event time is inherited by a freshly created stream element (or elements) from either the event that produced them or from watermark that triggered creation of those elements.

Watermarks in Parallel Streams

Watermarks are generated at, or directly after, source functions. Each parallel subtask of a source function usually generates its watermarks independently. These watermarks define the event time at that particular parallel source.

As the watermarks flow through the streaming program, they advance the event time at the operators where they arrive. Whenever an operator advances its event time, it generates a new watermark downstream for its successor operators.

Some operators consume multiple input streams; a union, for example, or operators following a keyBy(…) or partition(…) function. Such an operator’s current event time is the minimum of its input streams’ event times. As its input streams update their event times, so does the operator.

The figure below shows an example of events and watermarks flowing through parallel streams, and operators tracking event time.

Parallel data streams and operators with events and watermarks

Lateness

It is possible that certain elements will violate the watermark condition, meaning that even after the Watermark(t) has occurred, more elements with timestamp t’ <= t will occur. In fact, in many real world setups, certain elements can be arbitrarily delayed, making it impossible to specify a time by which all elements of a certain event timestamp will have occurred. Furthermore, even if the lateness can be bounded, delaying the watermarks by too much is often not desirable, because it causes too much delay in the evaluation of event time windows.

For this reason, streaming programs may explicitly expect some late elements. Late elements are elements that arrive after the system’s event time clock (as signaled by the watermarks) has already passed the time of the late element’s timestamp. See Allowed Lateness for more information on how to work with late elements in event time windows.

Windowing

Aggregating events (e.g., counts, sums) works differently on streams than in batch processing. For example, it is impossible to count all elements in a stream, because streams are in general infinite (unbounded). Instead, aggregates on streams (counts, sums, etc), are scoped by windows, such as “count over the last 5 minutes”, or “sum of the last 100 elements”.

Windows can be time driven (example: every 30 seconds) or data driven (example: every 100 elements). One typically distinguishes different types of windows, such as tumbling windows (no overlap), sliding windows (with overlap), and session windows (punctuated by a gap of inactivity).

Time- and Count Windows

Please check out this blog post for additional examples of windows or take a look a window documentation of the DataStream API.