Journal Management

Slack Docker Pulls GitHub edit source

Alluxio keeps the history of all metadata related changes, such as creating files or renaming directories, in edit logs referred to as “journal”. Upon startup, the Alluxio master will replay all the steps recorded in the journal to recover its last saved state. Also when the leading master falls back to a different master for high availability (HA) mode, the new leading master also replays the journal to recover the last state of the leading master. The purpose of this documentation is to help Alluxio administrators understand and manage the Alluxio journal.

Embedded Journal vs UFS Journal

There are two types of journals that Alluxio supports, EMBEDDED or UFS. The embedded journal stores edit logs on each master’s local file system and coordinates multiple masters in HA mode to access the logs based on a self-managed consensus protocol; whereas UFS journal stores edit logs in an external shared UFS storage, and relies on an external Zookeeper for coordination for HA mode. Starting from 2.2, the default journal type is EMBEDDED. This can be changed by setting the property “alluxio.master.journal.type” to “UFS” instead of “EMBEDDED”.

To choose between the default Embedded Journal and UFS journal, here are some aspects to consider:

  • External Dependency: Embedded journal does not rely on extra services. UFS journal requires an external Zookeeper cluster in HA mode to coordinate who is the leading master writing the journal, and requires a UFS for persistent storage. If the UFS and Zookeeper clusters are not readily available and stable, it is recommended to use the embedded journal over the UFS journal.
  • Fault tolerance: With n masters, using the embedded journal can tolerate only floor(n/2) master failures, compared to n-1 for UFS journal. For example, With 3 masters, UFS journal can tolerate 2 failures, while embedded journal can only tolerate 1. However, UFS journal depends on Zookeeper, which similarly only supports floor(#zookeeper_nodes / 2) failures.
  • Journal Storage Type: When using a single Alluxio master, UFS journal can be local storage; when using multiple Alluxio masters for HA mode, this UFS storage must be shared among masters with reading and writing access. To get reasonable performance, the UFS journal requires a UFS that supports fast streaming writes, such as HDFS or NFS. In contrast, S3 is not recommended for the UFS journal.

Configuring UFS Journal

The most important configuration value to set for the journal is alluxio.master.journal.folder. This must be set to a filesystem folder that is available to all masters. In single-master mode, use a local filesystem path for simplicity. With multiple masters distributed across different machines, the folder must be in a distributed system where all masters can access it. The journal folder should be in a filesystem that supports flush such as HDFS or NFS. It is not recommended to put the journal in an object store like S3. With an object store, every metadata operation requires a new object to be created, which is prohibitively slow for most serious use cases.

UFS journal options can be configured using the configuration prefix:

alluxio.master.journal.ufs.option.<some alluxio property>

Configuration examples:

Use HDFS to store the journal:

  1. alluxio.master.journal.folder=hdfs://[namenodeserver]:[namenodeport]/alluxio_journal
  2. alluxio.master.journal.ufs.option.alluxio.underfs.version=2.6

Use the local file system to store the journal:

  1. alluxio.master.journal.folder=/opt/alluxio/journal

Configuring Embedded Journal

Required configuration

The following configuration must be configured to a local path on the masters. The default value is local directory ${alluxio.work.dir}/journal.

  1. alluxio.master.journal.folder=/local/path/to/store/journal/files/

Set the addresses of all masters in the cluster. The default embedded journal port is 19200. This must be set on all Alluxio servers, as well as Alluxio clients.

  1. alluxio.master.embedded.journal.addresses=master_hostname_1:19200,master_hostname_2:19200,master_hostname_3:19200

Optional configuration

  • alluxio.master.embedded.journal.port: The port masters use for embedded journal communication. Default: 19200.
  • alluxio.master.rpc.port: The port masters use for RPCs. Default: 19998.
  • alluxio.master.rpc.addresses: A list of comma-separated host:port RPC addresses where the client should look for masters when using multiple masters without Zookeeper. This property is not used when Zookeeper is enabled, since Zookeeper already stores the master addresses. If this is not set, clients will look for masters using the hostnames from alluxio.master.embedded.journal.addresses and the master rpc port (Default:19998).

Advanced configuration

  • alluxio.master.embedded.journal.catchup.retry.wait: Time for embedded journal leader to wait before retrying a catch up. This is added to avoid excessive retries when server is not ready. Default: 1s.
  • alluxio.master.embedded.journal.entry.size.max: The maximum single journal entry size allowed to be flushed. This value should be smaller than 30MB. Set to a larger value to allow larger journal entries when using the Alluxio Catalog service. Default: 10MB.
  • alluxio.master.embedded.journal.flush.size.max: The maximum size in bytes of journal entries allowed in concurrent journal flushing (journal IO to standby masters and IO to local disks). Default: 160MB.
  • alluxio.master.embedded.journal.snapshot.replication.chunk.size: The stream chunk size used by masters to replicate snapshots. Default: 4MB.
  • alluxio.master.embedded.journal.transport.request.timeout.ms: The duration after which embedded journal masters will timeout messages sent between each other. Lower values might cause leadership instability when the network is slow. Default: 5s.
  • alluxio.master.embedded.journal.transport.max.inbound.message.size: Maximum allowed size for a network message between embedded journal masters. The configured value should allow for appending batches to all secondary masters. Default: 100MB.
  • alluxio.master.embedded.journal.write.local.first.enabled: Whether the journal writer will attempt to write entry locally before falling back to a full remote raft client. Disable local first write may impact the metadata performance under heavy load but less error-prone during network flakiness. Default: true.
  • alluxio.master.embedded.journal.write.timeout: Maximum time to wait for a write/flush on embedded journal. Default: 30sec.

Configuring Job service

It is usually best not to set any of these - by default the job master will use the same hostnames as the Alluxio master, so it is enough to set only alluxio.master.embedded.journal.addresses. These properties only need to be set when the job service runs independently of the rest of the system or using a non-standard port.

  • alluxio.job.master.embedded.journal.port: the port job masters use for embedded journal communications. Default: 20003.
  • alluxio.job.master.embedded.journal.addresses: a comma-separated list of journal addresses for all job masters in the cluster. The format is hostname1:port1,hostname2:port2,....
  • alluxio.job.master.rpc.addresses: A list of comma-separated host:port RPC addresses where the client should look for job masters when using multiple job masters without Zookeeper. This property is not used when Zookeeper is enabled, since Zookeeper already stores the job master addresses. If this is not set, clients will look for job masters using the hostnames from alluxio.master.embedded.journal.addresses and the job master rpc port.

Formatting the journal

Formatting the journal deletes all of its content and restores it to a fresh state. Before starting Alluxio for the first time, the journal must be formatted.

Warning: the following command permanently deletes all Alluxio metadata, so be careful with this command or backup your journal first (see next section).

  1. $ ./bin/alluxio formatMasters

Backing up the journal

Manually backing up the journal

Alluxio supports taking journal backups so that Alluxio metadata can be restored to a previous point in time. Generating a backup causes temporary service unavailability while the leading master is taking the backup. (See Backup delegation on HA cluster section for overcoming this limitation.)

To generate a backup, use the fsadmin backup CLI command.

  1. $ ./bin/alluxio fsadmin backup

By default, this will write a backup named alluxio-backup-YYYY-MM-DD-timestamp.gz to the /alluxio_backups directory of the root under storage system, e.g. hdfs://cluster/alluxio_backups. This default backup directory can be configured by setting alluxio.master.backup.directory

  1. alluxio.master.backup.directory=/alluxio/backups

See the backup command documentation for additional backup options.

Automatically backing up the journal

Alluxio supports automatically taking leading master metadata snapshots every day at a fixed time so that Alluxio metadata can be restored to at most one day before. This functionality is enabled by setting the following property in ${ALLUXIO_HOME}/conf/alluxio-site.properties:

  1. alluxio.master.daily.backup.enabled=true

The time to take daily snapshots is defined by alluxio.master.daily.backup.time. For example, if a user specified alluxio.master.daily.backup.time=05:30, the Alluxio leading master will back up its metadata to the alluxio.master.backup.directory of the root UFS every day at 5:30am UTC. We recommend setting the backup time to an off-peak time to avoid interfering with other users of the system.

In the daily backup, the backup directory needs to be an absolute path within the root UFS. For example, if alluxio.master.backup.directory=/alluxio_backups and alluxio.master.mount.table.root.ufs=hdfs://192.168.1.1:9000/alluxio/underfs, the default backup directory would be hdfs://192.168.1.1:9000/alluxio_backups.

The files to retain in the backup directory is limited by alluxio.master.daily.backup.files.retained. Users can set this property to the number of backup files they want to keep in the backup directory.

Backup delegation on HA cluster

Alluxio supports taking backup without causing service unavailability on a HA cluster configuration. When enabled, Alluxio leading master delegates backups to stand-by masters in the cluster. After configuring backup delegation, both manual and scheduled backups will run in delegated mode.

Backup delegation can be configured with the below properties:

  • alluxio.master.backup.delegation.enabled: Whether to delegate backups to stand-by masters. Default: false.
  • alluxio.master.backup.heartbeat.interval: Interval at which stand-by master that is taking the backup will update the leading master with current backup status. Default: 2sec.

Some advanced properties control the communication between Alluxio masters for coordinating the backup:

  • alluxio.master.backup.transport.timeout: Communication timeout for messaging between masters for coordinating backup. Default: 30sec.
  • alluxio.master.backup.connect.interval.min: Minimum duration to sleep before retrying after unsuccessful handshake between stand-by master and leading master. Default: 1sec.
  • alluxio.master.backup.connect.interval.max: Maximum duration to sleep before retrying after unsuccessful handshake between stand-by master and leading master. Default: 30sec.
  • alluxio.master.backup.abandon.timeout: Specifies how long the leading master waits for a heart-beat before abandoning the backup. Default: 1min.

Since it is uncertain which host will take the backup, it is suggested to use shared paths for taking backups with backup delegation.

A backup attempt will fail if delegation fails to find a stand-by master, thus favoring service availability. For manual backups, you can pass --allow-leader option to allow the leading master to take a backup when there are no stand-by masters to delegate the backup. This will cause temporary service unavailability while the leading master is writing a backup.

Restoring from a backup

To restore the Alluxio system from a journal backup, stop the system, format the journal, then restart the system, passing the URI of the backup with the -i (import) flag.

  1. $ ./bin/alluxio-stop.sh masters
  2. $ ./bin/alluxio formatMasters
  3. $ ./bin/alluxio-start.sh -i <backup_uri> masters

The <backup_uri> should be a full URI path that is available to all masters, e.g. hdfs://[namenodeserver]:[namenodeport]/alluxio_backups/alluxio-journal-YYYY-MM-DD-timestamp.gz If backups to the local disk of the leader master, copy the backup file to the same location in each master and pass in the local backup file path.

If starting up masters individually, pass the -i argument to each one. The master which becomes leader first will import the journal backup, and the rest will ignore the -i.

If the restore succeeds, you should see a log message along the lines of

  1. INFO AlluxioMasterProcess - Restored 57 entries from backup

in the leading master logs.

Changing masters

Embedded Journal Cluster

When internal leader election is used, Alluxio masters are determined with a quorum. Adding or removing masters requires keeping this quorum in a consistent state.

Adding a new master

To prevent inconsistencies in the cluster configuration across masters, only a single master should be added to an existing embedded journal cluster.

Below are the steps to add a new master to a live cluster:

  • Prepare the new master.
    • New master should contain all existing masters in its embedded journal configuration, complete with its address.
  • Start new master.
    • This will introduce the new master to the existing cluster.
    • New master will catch up with cluster’s state in the background.
  • Update existing masters’ configuration with the new master address.
    • This is to make sure existing members will connect the new member directly upon a restart.

Note: Adding to an already shut down cluster still requires adding only a single master at a time.

Note: When adding a master to a single master cluster, you should shut down and update the configuration for the existing master. Then both masters could be started together.

Removing a master

The embedded journal cluster will take notice when a member is not available anymore. Such masters will count against the failure tolerance of the cluster based on the initial member count. To resize the cluster after a node failure an explicit action is required.

Please note -domain parameter in below commands. This is because embedded journal based leader election is supported for both regular masters and job service masters. You should supply correct value based on which cluster you intend to work on.

1- Check current quorum state:

  1. $ ./bin/alluxio fsadmin journal quorum info -domain <MASTER | JOB_MASTER>

This will print out node status for all currently participating members of the embedded journal cluster. You should verify that the removed master is shown as UNAVAILABLE.

2- Remove member from the quorum:

-address option below should reflect the exact address that is returned by the .. quorum info command provided above.

  1. $ ./bin/alluxio fsadmin journal quorum remove -domain <MASTER | JOB_MASTER> -address <address>

3- Verify that the removed member is no longer shown in the quorum info.

UFS Journal Cluster

To add a master to an HA Alluxio cluster, you can simply start a new Alluxio master process, with the appropriate configuration. The configuration for the new master should be the same as other masters, except that the parameter alluxio.master.hostname=<MASTER_HOSTNAME> should reflect the new hostname. Once the new master starts, it will start interacting with ZooKeeper to participate in leader election.

Removing a master is as simple as stopping the master process. If the cluster is a single master cluster, stopping the master will essentially shutdown the cluster since the single master is down. If the Alluxio cluster is an HA cluster, stopping the leading master will force ZooKeeper to elect a new leading master and failover to that new leader. If a standby master stops, the operation of the cluster is unaffected. Keep in mind, Alluxio masters’ high availability depends on the availability of standby masters. If there are not enough standby masters, the availability of the leading master will be affected. It is recommended to have at least 3 masters for an HA Alluxio cluster.

Advanced

Managing the journal size

When running with a single master, the journal folder size will grow indefinitely as metadata operations are written to journal log files. To address this, production deployments should run in HA mode with multiple Alluxio masters. The standby masters will create checkpoints of the master state and clean up the logs that were written before the checkpoints. For example, if 3 million Alluxio files were created and then 2 million were deleted, the journal logs would contain 5 million total entries. Then if a checkpoint is taken, the checkpoint will contain only the metadata for the 1 million remaining files, and the original 5 million entries will be deleted.

By default, checkpoints are automatically taken every 2 million entries. This can be configured by setting alluxio.master.journal.checkpoint.period.entries on the masters. Setting the value lower will reduce the amount of disk space needed by the journal at the cost of additional work for the standby masters.

Checkpointing on secondary master

If HA mode is not an option, it is possible to run a master on the same node as a dedicated standby master. This second master exists only to write checkpoints, and will not serve client requests if the leading master dies. In this setup, both masters have similar memory requirements since they both need to hold all Alluxio metadata in memory. To start a dedicated standby master for writing periodic checkpoints, run

  1. $ ./bin/alluxio-start.sh secondary_master

Checkpointing on the leading master

Checkpointing requires a pause in master metadata changes and causes temporary service unavailability while the leading master is writing a checkpoint. This operation may take hours depending on Alluxio’s namespace size. Therefore, Alluxio’s leading master will not create checkpoints by default.

Restarting the current leading master to transfer the leadership to another running master periodically can help avoid leading master journal logs from growing unbounded when Alluxio is running in HA mode.

Starting from version 2.4, Alluxio embedded journal HA mode supports automatically transferring checkpoints from standby masters to the leading master. The leading master can use those checkpoints as taken locally to truncate its journal size without causing temporary service unavailability. No need to manually transfer leadership anymore.

If HA mode is not an option, the following command can be used to manually trigger the checkpoint:

  1. $ ./bin/alluxio fsadmin journal checkpoint

Similar to the backup command, checkpoint command should be used on an off-peak time to avoid interfering with other users of the system.

Recovering from journal issues

The journal is integral to Alluxio’s health. If the filesystem storing the journal loses availability, no metadata operations can be performed on Alluxio. Similarly, if the journal is accidentally deleted or its storage system becomes corrupted, Alluxio must be reformatted to recover. To avoid the need for full reformatting, we recommend taking regular journal backups at a time when the cluster is under low load. Then if something happens to the journal, you can recover from one of the backups.

Get a human-readable journal

Alluxio journal is serialized and not human-readable. The following command read the Alluxio journal and write it to a directory in a human-readable format.

  1. $ ./bin/alluxio readJournal

See here for more detailed usage.