Quickstart for Calico on K3s

Big picture

This quickstart gets you a single-node K3s cluster with Calico in approximately 5 minutes. You can use this cluster for testing and development.

Value

Use this quickstart to quickly and easily try Calico features. To deploy a cluster suitable for production, refer to Multi-node install.

The geeky details of what you get:

PolicyIPAMCNIOverlayRoutingDatastore

Before you begin

  • Make sure you have a linux host that meets the following requirements
    • x86-64 processor
    • 1CPU
    • 1GB Ram
    • 10GB free disk space
    • Ubuntu 16.04 (amd64), Ubuntu 18.04 (amd64), Ubuntu 20.04 (amd64)

Quickstart for Calico on K3s - 图1note

K3s supports ARM processors too, this quickstart was tested against x86-64 processor environment. For more detail please visit this link.

How to

Create a single-node K3s cluster

  • Initialize the master using the following command.
  1. curl -sfL https://get.k3s.io | K3S_KUBECONFIG_MODE="644" INSTALL_K3S_EXEC="--flannel-backend=none --cluster-cidr=192.168.0.0/16 --disable-network-policy --disable=traefik" sh -

Quickstart for Calico on K3s - 图2note

If 192.168.0.0/16 is already in use within your network you must select a different pod network CIDR by replacing 192.168.0.0/16 in the above command.

Quickstart for Calico on K3s - 图3note

K3s installer generates kubeconfig file in etc directory with limited permissions, using K3S_KUBECONFIG_MODE environment you are assigning necessary permissions to the file and make it accessible for other users.

Install Calico

  • Operator
  • Manifest

Install the Calico operator and custom resource definitions.

  1. kubectl create -f https://raw.githubusercontent.com/projectcalico/calico/v3.25.0/manifests/tigera-operator.yaml

Quickstart for Calico on K3s - 图4note

Due to the large size of the CRD bundle, kubectl apply might exceed request limits. Instead, use kubectl create or kubectl replace.

Install Calico by creating the necessary custom resource. For more information on configuration options available in this manifest, see the installation reference.

  1. kubectl create -f https://raw.githubusercontent.com/projectcalico/calico/v3.25.0/manifests/custom-resources.yaml

Quickstart for Calico on K3s - 图5note

Before creating this manifest, read its contents and make sure its settings are correct for your environment. For example, you may need to change the default IP pool CIDR to match your pod network CIDR.

Install Calico by using the following command.

  1. kubectl apply -f https://raw.githubusercontent.com/projectcalico/calico/v3.25.0/manifests/calico.yaml

Quickstart for Calico on K3s - 图6note

You can also view the YAML in a new tab.

You should see the following output.

  1. configmap/calico-config created
  2. customresourcedefinition.apiextensions.k8s.io/bgpconfigurations.crd.projectcalico.org created
  3. customresourcedefinition.apiextensions.k8s.io/bgppeers.crd.projectcalico.org created
  4. customresourcedefinition.apiextensions.k8s.io/blockaffinities.crd.projectcalico.org created
  5. customresourcedefinition.apiextensions.k8s.io/clusterinformations.crd.projectcalico.org created
  6. customresourcedefinition.apiextensions.k8s.io/felixconfigurations.crd.projectcalico.org created
  7. customresourcedefinition.apiextensions.k8s.io/globalnetworkpolicies.crd.projectcalico.org created
  8. customresourcedefinition.apiextensions.k8s.io/globalnetworksets.crd.projectcalico.org created
  9. customresourcedefinition.apiextensions.k8s.io/hostendpoints.crd.projectcalico.org created
  10. customresourcedefinition.apiextensions.k8s.io/ipamblocks.crd.projectcalico.org created
  11. customresourcedefinition.apiextensions.k8s.io/ipamconfigs.crd.projectcalico.org created
  12. customresourcedefinition.apiextensions.k8s.io/ipamhandles.crd.projectcalico.org created
  13. customresourcedefinition.apiextensions.k8s.io/ippools.crd.projectcalico.org created
  14. customresourcedefinition.apiextensions.k8s.io/kubecontrollersconfigurations.crd.projectcalico.org created
  15. customresourcedefinition.apiextensions.k8s.io/networkpolicies.crd.projectcalico.org created
  16. customresourcedefinition.apiextensions.k8s.io/networksets.crd.projectcalico.org created
  17. clusterrole.rbac.authorization.k8s.io/calico-kube-controllers created
  18. clusterrolebinding.rbac.authorization.k8s.io/calico-kube-controllers created
  19. clusterrole.rbac.authorization.k8s.io/calico-node created
  20. clusterrolebinding.rbac.authorization.k8s.io/calico-node created
  21. daemonset.apps/calico-node created
  22. serviceaccount/calico-node created
  23. deployment.apps/calico-kube-controllers created
  24. serviceaccount/calico-kube-controllers created

Final checks

  1. Confirm that all of the pods are running using the following command.
  1. watch kubectl get pods --all-namespaces

Wait until each pod shows the STATUS of Running.

  • Operator
  • Manifest
  1. NAMESPACE NAME READY STATUS RESTARTS AGE
  2. tigera-operator tigera-operator-c9cf5b94d-gj9qp 1/1 Running 0 107s
  3. calico-system calico-typha-7dcd87597-npqsf 1/1 Running 0 88s
  4. calico-system calico-node-rdwwz 1/1 Running 0 88s
  5. kube-system local-path-provisioner-6d59f47c7-4q8l2 1/1 Running 0 2m14s
  6. kube-system metrics-server-7566d596c8-xf66d 1/1 Running 0 2m14s
  7. kube-system coredns-8655855d6-wfdbm 1/1 Running 0 2m14s
  8. calico-system calico-kube-controllers-89df8c6f8-7hxc5 1/1 Running 0 87s
  1. NAMESPACE NAME READY STATUS RESTARTS AGE
  2. kube-system calico-node-9hn9z 1/1 Running 0 23m
  3. kube-system local-path-provisioner-6d59f47c7-drznc 1/1 Running 0 38m
  4. kube-system calico-kube-controllers-789f6df884-928lt 1/1 Running 0 23m
  5. kube-system metrics-server-7566d596c8-qxlfz 1/1 Running 0 38m
  6. kube-system coredns-8655855d6-blzl5 1/1 Running 0 38m
  1. Press CTRL+C to exit watch.

  2. Confirm that you now have a node in your cluster with the following command.

  1. kubectl get nodes -o wide

It should return something like the following.

  1. NAME STATUS ROLES AGE VERSION INTERNAL-IP EXTERNAL-IP OS-IMAGE KERNEL-VERSION CONTAINER-RUNTIME
  2. k3s-master Ready master 40m v1.18.2+k3s1 172.16.2.128 <none> Ubuntu 18.04.3 LTS 4.15.0-101-generic containerd://1.3.3-k3s2

Congratulations! You now have a single-node K3s cluster equipped with Calico.

Next steps