Redis binding spec

Detailed documentation on the Redis binding component

Component format

To setup Redis binding create a component of type bindings.redis. See this guide on how to create and apply a binding configuration.

  1. apiVersion: dapr.io/v1alpha1
  2. kind: Component
  3. metadata:
  4. name: <NAME>
  5. spec:
  6. type: bindings.redis
  7. version: v1
  8. metadata:
  9. - name: redisHost
  10. value: "<address>:6379"
  11. - name: redisPassword
  12. value: "**************"
  13. - name: enableTLS
  14. value: "<bool>"
  15. - name: direction
  16. value: "output"

Warning

The above example uses secrets as plain strings. It is recommended to use a secret store for the secrets as described here.

Spec metadata fields

FieldRequiredBinding supportDetailsExample
redisHostYOutputThe Redis host address“localhost:6379”
redisPasswordYOutputThe Redis password“password”
redisUsernameNOutputUsername for Redis host. Defaults to empty. Make sure your redis server version is 6 or above, and have created acl rule correctly.“username”
enableTLSNOutputIf the Redis instance supports TLS with public certificates it can be configured to enable or disable TLS. Defaults to “false”“true”, “false”
failoverNOutputProperty to enabled failover configuration. Needs sentinalMasterName to be set. Defaults to “false”“true”, “false”
sentinelMasterNameNOutputThe sentinel master name. See Redis Sentinel Documentation“”, “127.0.0.1:6379”
redeliverIntervalNOutputThe interval between checking for pending messages to redelivery. Defaults to “60s”. “0” disables redelivery.“30s”
processingTimeoutNOutputThe amount time a message must be pending before attempting to redeliver it. Defaults to “15s”. “0” disables redelivery.“30s”
redisTypeNOutputThe type of redis. There are two valid values, one is “node” for single node mode, the other is “cluster” for redis cluster mode. Defaults to “node”.“cluster”
redisDBNOutputDatabase selected after connecting to redis. If “redisType” is “cluster” this option is ignored. Defaults to “0”.“0”
redisMaxRetriesNOutputMaximum number of times to retry commands before giving up. Default is to not retry failed commands.“5”
redisMinRetryIntervalNOutputMinimum backoff for redis commands between each retry. Default is “8ms”; “-1” disables backoff.“8ms”
redisMaxRetryIntervalNOutputMaximum backoff for redis commands between each retry. Default is “512ms”;“-1” disables backoff.“5s”
dialTimeoutNOutputDial timeout for establishing new connections. Defaults to “5s”.“5s”
readTimeoutNOutputTimeout for socket reads. If reached, redis commands will fail with a timeout instead of blocking. Defaults to “3s”, “-1” for no timeout.“3s”
writeTimeoutNOutputTimeout for socket writes. If reached, redis commands will fail with a timeout instead of blocking. Defaults is readTimeout.“3s”
poolSizeNOutputMaximum number of socket connections. Default is 10 connections per every CPU as reported by runtime.NumCPU.“20”
poolTimeoutNOutputAmount of time client waits for a connection if all connections are busy before returning an error. Default is readTimeout + 1 second.“5s”
maxConnAgeNOutputConnection age at which the client retires (closes) the connection. Default is to not close aged connections.“30m”
minIdleConnsNOutputMinimum number of idle connections to keep open in order to avoid the performance degradation associated with creating new connections. Defaults to “0”.“2”
idleCheckFrequencyNOutputFrequency of idle checks made by idle connections reaper. Default is “1m”. “-1” disables idle connections reaper.“-1”
idleTimeoutNOutputAmount of time after which the client closes idle connections. Should be less than server’s timeout. Default is “5m”. “-1” disables idle timeout check.“10m”
directionNOutputDirection of the binding.“output”

Binding support

This component supports output binding with the following operations:

  • create
  • get
  • delete

create

You can store a record in Redis using the create operation. This sets a key to hold a value. If the key already exists, the value is overwritten.

Request

  1. {
  2. "operation": "create",
  3. "metadata": {
  4. "key": "key1"
  5. },
  6. "data": {
  7. "Hello": "World",
  8. "Lorem": "Ipsum"
  9. }
  10. }

Response

An HTTP 204 (No Content) and empty body is returned if successful.

get

You can get a record in Redis using the get operation. This gets a key that was previously set.

This takes an optional parameter delete, which is by default false. When it is set to true, this operation uses the GETDEL operation of Redis. For example, it returns the value which was previously set and then deletes it.

Request

  1. {
  2. "operation": "get",
  3. "metadata": {
  4. "key": "key1"
  5. },
  6. "data": {
  7. }
  8. }

Response

  1. {
  2. "data": {
  3. "Hello": "World",
  4. "Lorem": "Ipsum"
  5. }
  6. }

Request with delete flag

  1. {
  2. "operation": "get",
  3. "metadata": {
  4. "key": "key1",
  5. "delete": "true"
  6. },
  7. "data": {
  8. }
  9. }

delete

You can delete a record in Redis using the delete operation. Returns success whether the key exists or not.

Request

  1. {
  2. "operation": "delete",
  3. "metadata": {
  4. "key": "key1"
  5. }
  6. }

Response

An HTTP 204 (No Content) and empty body is returned if successful.

Create a Redis instance

Dapr can use any Redis instance - containerized, running on your local dev machine, or a managed cloud service, provided the version of Redis is 5.0.0 or later.

Note: Dapr does not support Redis >= 7. It is recommended to use Redis 6

The Dapr CLI will automatically create and setup a Redis Streams instance for you. The Redis instance will be installed via Docker when you run dapr init, and the component file will be created in default directory. ($HOME/.dapr/components directory (Mac/Linux) or %USERPROFILE%\.dapr\components on Windows).

You can use Helm to quickly create a Redis instance in our Kubernetes cluster. This approach requires Installing Helm.

  1. Install Redis into your cluster.

    1. helm repo add bitnami https://charts.bitnami.com/bitnami
    2. helm install redis bitnami/redis --set image.tag=6.2
  2. Run kubectl get pods to see the Redis containers now running in your cluster.

  3. Add redis-master:6379 as the redisHost in your redis.yaml file. For example:

    1. metadata:
    2. - name: redisHost
    3. value: redis-master:6379
  4. Next, we’ll get our Redis password, which is slightly different depending on the OS we’re using:

    • Windows: Run kubectl get secret --namespace default redis -o jsonpath="{.data.redis-password}" > encoded.b64, which will create a file with your encoded password. Next, run certutil -decode encoded.b64 password.txt, which will put your redis password in a text file called password.txt. Copy the password and delete the two files.

    • Linux/MacOS: Run kubectl get secret --namespace default redis -o jsonpath="{.data.redis-password}" | base64 --decode and copy the outputted password.

    Add this password as the redisPassword value in your redis.yaml file. For example:

    1. - name: redisPassword
    2. value: "lhDOkwTlp0"

AWS Redis

GCP Cloud MemoryStore

Azure Redis

Note

The Dapr CLI automatically deploys a local redis instance in self hosted mode as part of the dapr init command.

Last modified October 12, 2023: Update config.toml (#3826) (0ffc2e7)