BE Configuration

This document mainly introduces the relevant configuration items of BE.

The BE configuration file be.conf is usually stored in the conf/ directory of the BE deployment path. In version 0.14, another configuration file be_custom.conf will be introduced. The configuration file is used to record the configuration items that are dynamically configured and persisted by the user during operation.

After the BE process is started, it will read the configuration items in be.conf first, and then read the configuration items in be_custom.conf. The configuration items in be_custom.conf will overwrite the same configuration items in be.conf.

The location of the be_custom.conf file can be configured in be.conf through the custom_config_dir configuration item.

View configuration items

Users can view the current configuration items by visiting BE’s web page:

http://be_host:be_webserver_port/varz

Set configuration items

There are two ways to configure BE configuration items:

  1. Static configuration

    Add and set configuration items in the conf/be.conf file. The configuration items in be.conf will be read when BE starts. Configuration items not in be.conf will use default values.

  2. Dynamic configuration

    After BE starts, the configuration items can be dynamically set with the following commands.

    1. curl -X POST http://{be_ip}:{be_http_port}/api/update_config?{key}={value}'

    In version 0.13 and before, the configuration items modified in this way will become invalid after the BE process restarts. In 0.14 and later versions, the modified configuration can be persisted through the following command. The modified configuration items are stored in the be_custom.conf file.

    1. curl -X POST http://{be_ip}:{be_http_port}/api/update_config?{key}={value}&persis=true'

Examples

  1. Modify max_compaction_concurrency statically

    By adding in the be.conf file:

    max_compaction_concurrency=5

    Then restart the BE process to take effect the configuration.

  2. Modify streaming_load_max_mb dynamically

    After BE starts, the configuration item streaming_load_max_mb is dynamically set by the following command:

    1. curl -X POST http://{be_ip}:{be_http_port}/api/update_config?streaming_load_max_mb=1024

    The return value is as follows, indicating that the setting is successful.

    1. {
    2. "status": "OK",
    3. "msg": ""
    4. }

    The configuration will become invalid after the BE restarts. If you want to persist the modified results, use the following command:

    1. curl -X POST http://{be_ip}:{be_http_port}/api/update_config?streaming_load_max_mb=1024\&persist=true

Configurations

alter_tablet_worker_count

Default:3

The number of threads making schema changes

base_compaction_check_interval_seconds

Default:60 (s)

BaseCompaction thread polling interval

base_compaction_interval_seconds_since_last_operation

Default:86400

One of the triggering conditions of BaseCompaction: the interval since the last BaseCompaction

base_compaction_num_cumulative_deltas

Default:5

One of the triggering conditions of BaseCompaction: The limit of the number of Cumulative files to be reached. After reaching this limit, BaseCompaction will be triggered

base_compaction_num_threads_per_disk

Defalut:1

The number of threads that execute BaseCompaction tasks per disk

base_compaction_trace_threshold

  • Type: int32
  • Description: Threshold to logging base compaction’s trace information, in seconds
  • Default value: 10

Base compaction is a long time cost background task, this configuration is the threshold to logging trace information. Trace information in log file looks like:

  1. W0610 11:26:33.804431 56452 storage_engine.cpp:552] Trace:
  2. 0610 11:23:03.727535 (+ 0us) storage_engine.cpp:554] start to perform base compaction
  3. 0610 11:23:03.728961 (+ 1426us) storage_engine.cpp:560] found best tablet 546859
  4. 0610 11:23:03.728963 (+ 2us) base_compaction.cpp:40] got base compaction lock
  5. 0610 11:23:03.729029 (+ 66us) base_compaction.cpp:44] rowsets picked
  6. 0610 11:24:51.784439 (+108055410us) compaction.cpp:46] got concurrency lock and start to do compaction
  7. 0610 11:24:51.784818 (+ 379us) compaction.cpp:74] prepare finished
  8. 0610 11:26:33.359265 (+101574447us) compaction.cpp:87] merge rowsets finished
  9. 0610 11:26:33.484481 (+125216us) compaction.cpp:102] output rowset built
  10. 0610 11:26:33.484482 (+ 1us) compaction.cpp:106] check correctness finished
  11. 0610 11:26:33.513197 (+ 28715us) compaction.cpp:110] modify rowsets finished
  12. 0610 11:26:33.513300 (+ 103us) base_compaction.cpp:49] compaction finished
  13. 0610 11:26:33.513441 (+ 141us) base_compaction.cpp:56] unused rowsets have been moved to GC queue
  14. Metrics: {"filtered_rows":0,"input_row_num":3346807,"input_rowsets_count":42,"input_rowsets_data_size":1256413170,"input_segments_num":44,"merge_rowsets_latency_us":101574444,"merged_rows":0,"output_row_num":3346807,"output_rowset_data_size":1228439659,"output_segments_num":6}

base_compaction_write_mbytes_per_sec

Default:5(MB)

Maximum disk write speed per second of BaseCompaction task

base_cumulative_delta_ratio

Default:0.3 (30%)

One of the trigger conditions of BaseCompaction: Cumulative file size reaches the proportion of Base file

be_port

  • Type: int32
  • Description: The port of the thrift server on BE which used to receive requests from FE
  • Default value: 9060

be_service_threads

  • Type: int32
  • Description: The number of execution threads of the thrift server service on BE which represents the number of threads that can be used to execute FE requests.
  • Default value: 64

brpc_max_body_size

This configuration is mainly used to modify the parameter max_body_size of brpc.

Sometimes the query fails and an error message of body_size is too large will appear in the BE log. This may happen when the SQL mode is “multi distinct + no group by + more than 1T of data”.

This error indicates that the packet size of brpc exceeds the configured value. At this time, you can avoid this error by increasing the configuration.

brpc_socket_max_unwritten_bytes

This configuration is mainly used to modify the parameter socket_max_unwritten_bytes of brpc.

Sometimes the query fails and an error message of The server is overcrowded will appear in the BE log. This means there are too many messages to buffer at the sender side, which may happen when the SQL needs to send large bitmap value. You can avoid this error by increasing the configuration.

brpc_num_threads

This configuration is mainly used to modify the number of bthreads for brpc. The default value is set to -1, which means the number of bthreads is #cpu-cores.

User can set this configuration to a larger value to get better QPS performance. For more information, please refer to https://github.com/apache/incubator-brpc/blob/master/docs/cn/benchmark.md

brpc_port

  • Type: int32
  • Description: The port of BRPC on BE, used for communication between BEs
  • Default value: 9060

buffer_pool_clean_pages_limit

默认值:20G

Clean up pages that may be saved by the buffer pool

buffer_pool_limit

  • Type: string
  • Description: The largest allocatable memory of the buffer pool
  • Default value: 80G

The maximum amount of memory available in the BE buffer pool. The buffer pool is a new memory management structure of BE, which manages the memory by the buffer page and enables spill data to disk. The memory for all concurrent queries will be allocated from the buffer pool. The current buffer pool only works on AggregationNode and ExchangeNode.

check_auto_compaction_interval_seconds

  • Type: int32
  • Description: Check the configuration of auto compaction in seconds when auto compaction disabled.
  • Default value: 5

check_consistency_worker_count

Default:1

The number of worker threads to calculate the checksum of the tablet

chunk_reserved_bytes_limit

Default:2147483648

The reserved bytes limit of Chunk Allocator is 2GB by default. Increasing this variable can improve performance, but it will get more free memory that other modules cannot use.

clear_transaction_task_worker_count

Default:1

Number of threads used to clean up transactions

clone_worker_count

Default:3

Number of threads used to perform cloning tasks

cluster_id

  • Type: int32
  • Description: Configure the cluster id to which the BE belongs.
  • Default value: -1

This value is usually delivered by the FE to the BE by the heartbeat, no need to configure. When it is confirmed that a BE belongs to a certain Drois cluster, it can be configured. The cluster_id file under the data directory needs to be modified to make sure same as this parament.

column_dictionary_key_ratio_threshold

Default:0

The value ratio of string type, less than this ratio, using dictionary compression algorithm

column_dictionary_key_size_threshold

Default:0

Dictionary compression column size, less than this value using dictionary compression algorithm

compaction_tablet_compaction_score_factor

  • Type: int32
  • Description: Coefficient for compaction score when calculating tablet score to find a tablet for compaction.
  • Default value: 1

compaction_tablet_scan_frequency_factor

  • Type: int32
  • Description: Coefficient for tablet scan frequency when calculating tablet score to find a tablet for compaction.
  • Default value: 0

Tablet scan frequency can be taken into consideration when selecting an tablet for compaction and preferentially do compaction for those tablets which are scanned frequently during a latest period of time at the present. Tablet score can be calculated like this:

tablet_score = compaction_tablet_scan_frequency_factor * tablet_scan_frequency + compaction_tablet_compaction_score_factor * compaction_score

compaction_task_num_per_disk

  • Type: int32
  • Description: The number of compaction tasks which execute in parallel for a disk.
  • Default value: 2

compress_rowbatches

  • Type: bool
  • Description: enable to use Snappy compression algorithm for data compression when serializing RowBatch
  • Default value: true

create_tablet_worker_count

Default:3

Number of worker threads for BE to create a tablet

cumulative_compaction_rounds_for_each_base_compaction_round

  • Type: int32
  • Description: How many rounds of cumulative compaction for each round of base compaction when compaction tasks generation.
  • Default value: 9

disable_auto_compaction

  • Type: bool
  • Description: Whether disable automatic compaction task
  • Default value: false

Generally it needs to be turned off. When you want to manually operate the compaction task in the debugging or test environment, you can turn on the configuration.

cumulative_compaction_budgeted_bytes

Default:104857600

One of the trigger conditions of BaseCompaction: Singleton file size limit, 100MB

cumulative_compaction_check_interval_seconds

Default:10 (s)

CumulativeCompaction thread polling interval

cumulative_compaction_num_threads_per_disk

Default:1

The number of CumulativeCompaction threads per disk

cumulative_compaction_skip_window_seconds

Default:30(s)

CumulativeCompaction skips the most recently released increments to prevent compacting versions that may be queried (in case the query planning phase takes some time). Change the parameter is to set the skipped window time size

cumulative_compaction_trace_threshold

  • Type: int32
  • Description: Threshold to logging cumulative compaction’s trace information, in seconds
  • Default value: 10

Similar to base_compaction_trace_threshold.

disable_compaction_trace_log

  • Type: bool
  • Description: disable the trace log of compaction
  • Default value: true

If set to true, the cumulative_compaction_trace_threshold and base_compaction_trace_threshold won’t work and log is disabled.

cumulative_compaction_policy

  • Type: string
  • Description: Configure the merge policy of the cumulative compaction stage. Currently, two merge policy have been implemented, num_based and size_based.
  • Default value: size_based

In detail, ordinary is the initial version of the cumulative compaction merge policy. After a cumulative compaction, the base compaction process is directly performed. The size_based policy is an optimized version of the ordinary strategy. Versions are merged only when the disk volume of the rowset is of the same order of magnitude. After the compaction, the output rowset which satisfies the conditions is promoted to the base compaction stage. In the case of a large number of small batch imports: reduce the write magnification of base compact, trade-off between read magnification and space magnification, and reducing file version data.

cumulative_size_based_promotion_size_mbytes

  • Type: int64
  • Description: Under the size_based policy, the total disk size of the output rowset of cumulative compaction exceeds this configuration size, and the rowset will be used for base compaction. The unit is m bytes.
  • Default value: 1024

In general, if the configuration is less than 2G, in order to prevent the cumulative compression time from being too long, resulting in the version backlog.

cumulative_size_based_promotion_ratio

  • Type: double
  • Description: Under the size_based policy, when the total disk size of the cumulative compaction output rowset exceeds the configuration ratio of the base version rowset, the rowset will be used for base compaction.
  • Default value: 0.05

Generally, it is recommended that the configuration should not be higher than 0.1 and lower than 0.02.

cumulative_size_based_promotion_min_size_mbytes

  • Type: int64
  • Description: Under the size_based strategy, if the total disk size of the output rowset of the cumulative compaction is lower than this configuration size, the rowset will not undergo base compaction and is still in the cumulative compaction process. The unit is m bytes.
  • Default value: 64

Generally, the configuration is within 512m. If the configuration is too large, the size of the early base version is too small, and base compaction has not been performed.

cumulative_size_based_compaction_lower_size_mbytes

  • Type: int64
  • Description: Under the size_based strategy, when the cumulative compaction is merged, the selected rowsets to be merged have a larger disk size than this configuration, then they are divided and merged according to the level policy. When it is smaller than this configuration, merge directly. The unit is m bytes.
  • Default value: 64

Generally, the configuration is within 128m. Over configuration will cause more cumulative compaction write amplification.

custom_config_dir

Configure the location of the be_custom.conf file. The default is in the conf/ directory.

In some deployment environments, the conf/ directory may be overwritten due to system upgrades. This will cause the user modified configuration items to be overwritten. At this time, we can store be_custom.conf in another specified directory to prevent the configuration file from being overwritten.

default_num_rows_per_column_file_block

  • Type: int32
  • Description: Configure how many rows of data are contained in a single RowBlock.
  • Default value: 1024

default_rowset_type

  • Type: string
  • Description: Identifies the storage format selected by BE by default. The configurable parameters are: “ALPHA“, “BETA“. Mainly play the following two roles
  1. When the storage_format of the table is set to Default, select the storage format of BE through this configuration.
  2. Select the storage format of when BE performing Compaction
  • Default value: BETA

delete_worker_count

Default:3

Number of threads performing data deletion tasks

disable_mem_pools

Default:false

Whether to disable the memory cache pool, it is not disabled by default

disable_storage_page_cache

  • Type: bool
  • Description: Disable to use page cache for index caching, this configuration only takes effect in BETA storage format, usually it is recommended to false
  • Default value: false

disk_stat_monitor_interval

Default:5(s)

Disk status check interval

doris_cgroups

Default:empty

Cgroups assigned to doris

doris_max_pushdown_conjuncts_return_rate

  • Type: int32
  • Description: When BE performs HashJoin, it will adopt a dynamic partitioning method to push the join condition to OlapScanner. When the data scanned by OlapScanner is larger than 32768 rows, BE will check the filter condition. If the filter rate of the filter condition is lower than this configuration, Doris will stop using the dynamic partition clipping condition for data filtering.
  • Default value: 90

doris_max_scan_key_num

  • Type: int
  • Description: Used to limit the maximum number of scan keys that a scan node can split in a query request. When a conditional query request reaches the scan node, the scan node will try to split the conditions related to the key column in the query condition into multiple scan key ranges. After that, these scan key ranges will be assigned to multiple scanner threads for data scanning. A larger value usually means that more scanner threads can be used to increase the parallelism of the scanning operation. However, in high concurrency scenarios, too many threads may bring greater scheduling overhead and system load, and will slow down the query response speed. An empirical value is 50. This configuration can be configured separately at the session level. For details, please refer to the description of max_scan_key_num in Variables.
  • Default value: 1024

When the concurrency cannot be improved in high concurrency scenarios, try to reduce this value and observe the impact.

doris_scan_range_row_count

  • Type: int32
  • Description: When BE performs data scanning, it will split the same scanning range into multiple ScanRanges. This parameter represents the scan data range of each ScanRange. This parameter can limit the time that a single OlapScanner occupies the io thread.
  • Default value: 524288

doris_scanner_queue_size

  • Type: int32
  • Description: The length of the RowBatch buffer queue between TransferThread and OlapScanner. When Doris performs data scanning, it is performed asynchronously. The Rowbatch scanned by OlapScanner will be placed in the scanner buffer queue, waiting for the upper TransferThread to take it away.
  • Default value: 1024

doris_scanner_row_num

Default:16384

The maximum number of data rows returned by each scanning thread in a single execution

doris_scanner_thread_pool_queue_size

  • Type: int32
  • Description: The queue length of the Scanner thread pool. In Doris’ scanning tasks, each Scanner will be submitted as a thread task to the thread pool waiting to be scheduled, and after the number of submitted tasks exceeds the length of the thread pool queue, subsequent submitted tasks will be blocked until there is a empty slot in the queue.
  • Default value: 102400

doris_scanner_thread_pool_thread_num

  • Type: int32
  • Description: The number of threads in the Scanner thread pool. In Doris’ scanning tasks, each Scanner will be submitted as a thread task to the thread pool to be scheduled. This parameter determines the size of the Scanner thread pool.
  • Default value: 48

download_low_speed_limit_kbps

Default:50 (KB/s)

Minimum download speed

download_low_speed_time

Default:300(s)

Download time limit, 300 seconds by default

download_worker_count

Default:1

The number of download threads, the default is 1

drop_tablet_worker_count

Default:3

Number of threads to delete tablet

enable_metric_calculator

Default:true

If set to true, the metric calculator will run to collect BE-related indicator information, if set to false, it will not run

enable_partitioned_aggregation

  • Type: bool
  • Description: Whether the BE node implements the aggregation operation by PartitionAggregateNode, if false, AggregateNode will be executed to complete the aggregation. It is not recommended to set it to false in non-special demand scenarios.
  • Default value: true

enable_prefetch

  • Type: bool
  • Description: When using PartitionedHashTable for aggregation and join calculations, whether to perform HashBuket prefetch. Recommended to be set to true
  • Default value: true

enable_quadratic_probing

  • Type: bool
  • Description: When a Hash conflict occurs when using PartitionedHashTable, enable to use the square detection method to resolve the Hash conflict. If the value is false, linear detection is used to resolve the Hash conflict. For the square detection method, please refer to: quadratic_probingBE Configuration - 图1 (opens new window)
  • Default value: true

enable_system_metrics

Default:true

User control to turn on and off system indicators.

enable_token_check

Default:true

Used for forward compatibility, will be removed later.

es_http_timeout_ms

Default:5000 (ms)

The timeout period for connecting to ES via http, the default is 5 seconds.

es_scroll_keepalive

Default:5m

es scroll Keeplive hold time, the default is 5 minutes

etl_thread_pool_queue_size

Default:256

The size of the ETL thread pool

etl_thread_pool_size

exchg_node_buffer_size_bytes

  • Type: int32
  • Description: The size of the Buffer queue of the ExchangeNode node, in bytes. After the amount of data sent from the Sender side is larger than the Buffer size of ExchangeNode, subsequent data sent will block until the Buffer frees up space for writing.
  • Default value: 10485760

file_descriptor_cache_capacity

Default:32768

File handle cache capacity, 32768 file handles are cached by default.

cache_clean_interval

Default:1800(s)

File handle cache cleaning interval, used to clean up file handles that have not been used for a long time. Also the clean interval of Segment Cache.

flush_thread_num_per_store

Default:2

The number of threads used to refresh the memory table per store

force_recovery

fragment_pool_queue_size

Default:2048

The upper limit of query requests that can be processed on a single node

fragment_pool_thread_num_min

Default:64

fragment_pool_thread_num_max

Default:256

The above two parameters are to set the number of query threads. By default, a minimum of 64 threads will be started, subsequent query requests will dynamically create threads, and a maximum of 256 threads will be created.

heartbeat_service_port

  • Type: int32
  • Description: Heartbeat service port (thrift) on BE, used to receive heartbeat from FE
  • Default value: 9050

heartbeat_service_thread_count

  • Type: int32
  • Description: The number of threads that execute the heartbeat service on BE. the default is 1, it is not recommended to modify
  • Default value: 1

ignore_broken_disk

Default:false

When BE start, If there is a broken disk, BE process will exit by default.Otherwise, we will ignore the broken disk

ignore_load_tablet_failure

When BE starts, it will check all the paths under the storage_root_path in configuration.

ignore_broken_disk=true

If the path does not exist or the file under the path cannot be read or written (broken disk), it will be ignored. If there are any other available paths, the startup will not be interrupted.

ignore_broken_disk=false

If the path does not exist or the file under the path cannot be read or written (bad disk), the startup will fail and exit.

The default value is false.

  1. load tablets from header failed, failed tablets size: xxx, path=xxx

Indicates how many tablets in the data directory failed to load. At the same time, the log will also contain specific information about the tablet that failed to load. At this time, manual intervention is required to troubleshoot the cause of the error. After investigation, there are usually two ways to recover:

  1. The tablet information cannot be repaired. If the other copies are normal, you can delete the wrong tablet with the meta_tool tool.
  2. Set ignore_load_tablet_failure to true, BE will ignore these faulty tablets and start normally

ignore_rowset_stale_unconsistent_delete

  • Type: boolean
  • Description:It is used to decide whether to delete the outdated merged rowset if it cannot form a consistent version path.
  • Default: false

The merged expired rowset version path will be deleted after half an hour. In abnormal situations, deleting these versions will result in the problem that the consistent path of the query cannot be constructed. When the configuration is false, the program check is strict and the program will directly report an error and exit. When configured as true, the program will run normally and ignore this error. In general, ignoring this error will not affect the query, only when the merged version is dispatched by fe, -230 error will appear.

inc_rowset_expired_sec

Default:1800 (s)

Import activated data, storage engine retention time, used for incremental cloning

index_stream_cache_capacity

Default:10737418240

BloomFilter/Min/Max and other statistical information cache capacity

load_data_reserve_hours

Default:4(hour)

Used for mini load. The mini load data file will be deleted after this time

load_error_log_reserve_hours

Default:48 (hour)

The load error log will be deleted after this time

load_process_max_memory_limit_bytes

Default:107374182400

The upper limit of memory occupied by all imported threads on a single node, default value: 100G

Set these default values very large, because we don’t want to affect load performance when users upgrade Doris. If necessary, the user should set these configurations correctly.

load_process_max_memory_limit_percent

Default:80 (%)

The percentage of the upper memory limit occupied by all imported threads on a single node, the default is 80%

Set these default values very large, because we don’t want to affect load performance when users upgrade Doris. If necessary, the user should set these configurations correctly

log_buffer_level

Default:empty

The log flushing strategy is kept in memory by default

madvise_huge_pages

Default:false

Whether to use linux memory huge pages, not enabled by default

make_snapshot_worker_count

Default:5

Number of threads making snapshots

max_client_cache_size_per_host

Default:10

The maximum number of client caches per host. There are multiple client caches in BE, but currently we use the same cache size configuration. If necessary, use different configurations to set up different client-side caches

max_compaction_threads

  • Type: int32
  • Description: The maximum of thread number in compaction thread pool.
  • Default value: 10

max_consumer_num_per_group

Default:3

The maximum number of consumers in a data consumer group, used for routine load

min_cumulative_compaction_num_singleton_deltas

Default:5

Cumulative compaction strategy: the minimum number of incremental files

max_cumulative_compaction_num_singleton_deltas

Default:1000

Cumulative compaction strategy: the maximum number of incremental files

max_download_speed_kbps

Default:50000 (KB/s)

Maximum download speed limit

max_free_io_buffers

Default:128

For each io buffer size, the maximum number of buffers that IoMgr will reserve ranges from 1024B to 8MB buffers, up to about 2GB buffers.

max_garbage_sweep_interval

Default:3600

The maximum interval for disk garbage cleaning, the default is one hour

max_memory_sink_batch_count

Default:20

The maximum external scan cache batch count, which means that the cache max_memory_cache_batch_count * batch_size row, the default is 20, and the default value of batch_size is 1024, which means that 20 * 1024 rows will be cached

max_percentage_of_error_disk

  • Type: int32
  • Description: The storage engine allows the percentage of damaged hard disks to exist. After the damaged hard disk exceeds the changed ratio, BE will automatically exit.
  • Default value: 0

max_pushdown_conditions_per_column

  • Type: int

  • Description: Used to limit the maximum number of conditions that can be pushed down to the storage engine for a single column in a query request. During the execution of the query plan, the filter conditions on some columns can be pushed down to the storage engine, so that the index information in the storage engine can be used for data filtering, reducing the amount of data that needs to be scanned by the query. Such as equivalent conditions, conditions in IN predicates, etc. In most cases, this parameter only affects queries containing IN predicates. Such as WHERE colA IN (1,2,3,4, ...). A larger number means that more conditions in the IN predicate can be pushed to the storage engine, but too many conditions may cause an increase in random reads, and in some cases may reduce query efficiency. This configuration can be individually configured for session level. For details, please refer to the description of max_pushdown_conditions_per_column in [Variables](../ variables.md).

  • Default value: 1024

  • Example

    The table structure is id INT, col2 INT, col3 varchar (32), ....

    The query is ... WHERE id IN (v1, v2, v3, ...)

    If the number of conditions in the IN predicate exceeds the configuration, try to increase the configuration value and observe whether the query response has improved.

max_runnings_transactions_per_txn_map

Default:100

Max number of txns for every txn_partition_map in txn manager, this is a self protection to avoid too many txns saving in manager

max_send_batch_parallelism_per_job

  • Type: int
  • Description: Max send batch parallelism for OlapTableSink. The value set by the user for send_batch_parallelism is not allowed to exceed max_send_batch_parallelism_per_job, if exceed, the value of send_batch_parallelism would be max_send_batch_parallelism_per_job.
  • Default value: 1

max_tablet_num_per_shard

Default:1024

The number of sliced tablets, plan the layout of the tablet, and avoid too many tablet subdirectories in the repeated directory

max_tablet_version_num

  • Type: int
  • Description: Limit the number of versions of a single tablet. It is used to prevent a large number of version accumulation problems caused by too frequent import or untimely compaction. When the limit is exceeded, the import task will be rejected.
  • Default value: 500

mem_limit

  • Type: string
  • Description: Limit the percentage of the server’s maximum memory used by the BE process. It is used to prevent BE memory from occupying to many the machine’s memory. This parameter must be greater than 0. When the percentage is greater than 100%, the value will default to 100%.
  • Default value: 80%

memory_limitation_per_thread_for_schema_change

Default:2 (G)

Maximum memory allowed for a single schema change task

memory_maintenance_sleep_time_s

Default:10

Sleep time (in seconds) between memory maintenance iterations

memory_max_alignment

Default:16

Maximum alignment memory

read_size

Default:8388608

The read size is the read size sent to the os. There is a trade-off between latency and the whole process, getting to keep the disk busy but not introducing seeks. For 8 MB reads, random io and sequential io have similar performance

min_buffer_size

Default:1024

Minimum read buffer size (in bytes)

min_compaction_failure_interval_sec

  • Type: int32
  • Description: During the cumulative compaction process, when the selected tablet fails to be merged successfully, it will wait for a period of time before it may be selected again. The waiting period is the value of this configuration.
  • Default value: 600
  • Unit: seconds

min_compaction_threads

  • Type: int32
  • Description: The minimum of thread number in compaction thread pool.
  • Default value: 10

min_file_descriptor_number

Default:60000

The lower limit required by the file handle limit of the BE process

min_garbage_sweep_interval

Default:180

The minimum interval between disk garbage cleaning, time seconds

mmap_buffers

Default:false

Whether to use mmap to allocate memory, not used by default

num_cores

  • Type: int32
  • Description: The number of CPU cores that BE can use. When the value is 0, BE will obtain the number of CPU cores of the machine from /proc/cpuinfo.
  • Default value: 0

num_disks

Defalut:0

Control the number of disks on the machine. If it is 0, it comes from the system settings

num_threads_per_core

Default:3

Control the number of threads that each core runs. Usually choose 2 times or 3 times the number of cores. This keeps the core busy without causing excessive jitter

num_threads_per_disk

Default:0

The maximum number of threads per disk is also the maximum queue depth of each disk

number_tablet_writer_threads

Default:16

Number of tablet write threads

path_gc_check

Default:true

Whether to enable the recycle scan data thread check, it is enabled by default

path_gc_check_interval_second

Default:86400

Recycle scan data thread check interval, in seconds

path_gc_check_step

Default:1000

path_gc_check_step_interval_ms

Default:10 (ms)

path_scan_interval_second

Default:86400

pending_data_expire_time_sec

Default:1800

The maximum duration of unvalidated data retained by the storage engine, the default unit: seconds

periodic_counter_update_period_ms

Default:500

Update rate counter and sampling counter cycle, default unit: milliseconds

plugin_path

Default:${DORIS_HOME}/plugin

pliugin path

port

  • Type: int32
  • Description: The port used in UT. Meaningless in the actual environment and can be ignored.
  • Default value: 20001

pprof_profile_dir

Default :${DORIS_HOME}/log

pprof profile save directory

priority_networks

Default:empty

Declare a selection strategy for those servers with many IPs. Note that at most one ip should match this list. This is a semicolon-separated list in CIDR notation, such as 10.10.10.0/24. If there is no IP matching this rule, one will be randomly selected

priority_queue_remaining_tasks_increased_frequency

Default:512

the increased frequency of priority for remaining tasks in BlockingPriorityQueue

publish_version_worker_count

Default:8

the count of thread to publish version

pull_load_task_dir

Default:${DORIS_HOME}/var/pull_load

Pull the directory of the laod task

push_worker_count_high_priority

Default:3

Import the number of threads for processing HIGH priority tasks

push_worker_count_normal_priority

Default:3

Import the number of threads for processing NORMAL priority tasks

push_write_mbytes_per_sec

  • Type: int32
  • Description: Load data speed control, the default is 10MB per second. Applicable to all load methods.
  • Unit: MB
  • Default value: 10

query_scratch_dirs

  • Type: string
  • Description: The directory selected by BE to store temporary data during spill to disk. which is similar to the storage path configuration, multiple directories are separated by ;.
  • Default value: ${DORIS_HOME}

release_snapshot_worker_count

Default:5

Number of threads releasing snapshots

report_disk_state_interval_seconds

Default:60

The interval time for the agent to report the disk status to FE, unit (seconds)

report_tablet_interval_seconds

Default:60

The interval time for the agent to report the olap table to the FE, in seconds

report_task_interval_seconds

Default:10

The interval time for the agent to report the task signature to FE, unit (seconds)

result_buffer_cancelled_interval_time

Default:300

Result buffer cancellation time (unit: second)

routine_load_thread_pool_size

Default:10

The thread pool size of the routine load task. This should be greater than the FE configuration’max_concurrent_task_num_per_be’ (default 5)

row_nums_check

Default:true

Check row nums for BE/CE and schema change. true is open, false is closed

row_step_for_compaction_merge_log

  • Type: int64
  • Description: Merge log will be printed for each “row_step_for_compaction_merge_log” rows merged during compaction. If the value is set to 0, merge log will not be printed.
  • Default value: 0
  • Dynamically modify: true

scan_context_gc_interval_min

Default:5

This configuration is used for the context gc thread scheduling cycle. Note: The unit is minutes, and the default is 5 minutes

send_batch_thread_pool_thread_num

  • Type: int32
  • Description: The number of threads in the SendBatch thread pool. In NodeChannels’ sending data tasks, the SendBatch operation of each NodeChannel will be submitted as a thread task to the thread pool to be scheduled. This parameter determines the size of the SendBatch thread pool.
  • Default value: 256

send_batch_thread_pool_queue_size

  • Type: int32
  • Description: The queue length of the SendBatch thread pool. In NodeChannels’ sending data tasks, the SendBatch operation of each NodeChannel will be submitted as a thread task to the thread pool waiting to be scheduled, and after the number of submitted tasks exceeds the length of the thread pool queue, subsequent submitted tasks will be blocked until there is a empty slot in the queue.

sleep_one_second

  • Type: int32
  • Description: Global variables, used for BE thread sleep for 1 seconds, should not be modified
  • Default value: 1

small_file_dir

Default:${DORIS_HOME}/lib/small_file/

Directory for saving files downloaded by SmallFileMgr

snapshot_expire_time_sec

Default:172800

Snapshot file cleaning interval, default value: 48 hours

status_report_interval

Default:5

Interval between profile reports; unit: seconds

storage_flood_stage_left_capacity_bytes

Default:1073741824

The min bytes that should be left of a data dir,default value:1G

storage_flood_stage_usage_percent

Default:95 (95%)

The storage_flood_stage_usage_percent and storage_flood_stage_left_capacity_bytes configurations limit the maximum usage of the capacity of the data directory.

storage_medium_migrate_count

Default:1

the count of thread to clone

storage_page_cache_limit

Default:20%

Cache for storage page size

index_page_cache_percentage

  • Type: int32
  • Description: Index page cache as a percentage of total storage page cache, value range is [0, 100]
  • Default value: 10

storage_root_path

  • Type: string

  • Description: data root path, separate by ‘;’.you can specify the storage medium of each root path, HDD or SSD. you can add capacity limit at the end of each root path, seperate by ‘,’

    eg.1: storage_root_path=/home/disk1/doris.HDD,50;/home/disk2/doris.SSD,1;/home/disk2/doris

    • 1./home/disk1/doris.HDD, capacity limit is 50GB, HDD;
    • 2./home/disk2/doris.SSD, capacity limit is 1GB, SSD;
    • 3./home/disk2/doris, capacity limit is disk capacity, HDD(default)

    eg.2: storage_root_path=/home/disk1/doris,medium:hdd,capacity:50;/home/disk2/doris,medium:ssd,capacity:50

    • 1./home/disk1/doris,medium:hdd,capacity:10,capacity limit is 10GB, HDD;
    • 2./home/disk2/doris,medium:ssd,capacity:50,capacity limit is 50GB, SSD;
  • Default: ${DORIS_HOME}

storage_strict_check_incompatible_old_format

  • Type: bool
  • Description: Used to check incompatible old format strictly
  • Default value: true
  • Dynamically modify: false

This config is used to check incompatible old format hdr_ format whether doris uses strict way. When config is true, process will log fatal and exit. When config is false, process will only log warning.

streaming_load_max_mb

  • Type: int64
  • Description: Used to limit the maximum amount of csv data allowed in one Stream load. The unit is MB.
  • Default value: 10240
  • Dynamically modify: yes

Stream Load is generally suitable for loading data less than a few GB, not suitable for loading` too large data.

streaming_load_json_max_mb

  • Type: int64
  • Description: it is used to limit the maximum amount of json data allowed in one Stream load. The unit is MB.
  • Default value: 100
  • Dynamically modify: yes

Some data formats, such as JSON, cannot be split. Doris must read all the data into the memory before parsing can begin. Therefore, this value is used to limit the maximum amount of data that can be loaded in a single Stream load.

streaming_load_rpc_max_alive_time_sec

Default:1200

The lifetime of TabletsChannel. If the channel does not receive any data at this time, the channel will be deleted, unit: second

sync_tablet_meta

Default:false

Whether the storage engine opens sync and keeps it to the disk

sys_log_dir

  • Type: string
  • Description: Storage directory of BE log data
  • Default: ${DORIS_HOME}/log

sys_log_level

INFO

Log Level: INFO < WARNING < ERROR < FATAL

sys_log_roll_mode

Default:SIZE-MB-1024

The size of the log split, one log file is split every 1G

sys_log_roll_num

Default:10

Number of log files kept

sys_log_verbose_level

Defaultl:10

Log display level, used to control the log output at the beginning of VLOG in the code

sys_log_verbose_modules

Default:empty

Log printing module, writing olap will only print the log under the olap module

tablet_map_shard_size

Default:1

tablet_map_lock fragment size, the value is 2^n, n=0,1,2,3,4, this is for better tablet management

tablet_meta_checkpoint_min_interval_secs

Default:600(s)

The polling interval of the TabletMeta Checkpoint thread

tablet_meta_checkpoint_min_new_rowsets_num

tablet_scan_frequency_time_node_interval_second

  • Type: int64
  • Description: Time interval to record the metric ‘query_scan_count’ and timestamp in second for the purpose of calculating tablet scan frequency during a latest period of time at the present.
  • Default: 300

tablet_stat_cache_update_interval_second

默认值:10

The minimum number of Rowsets for TabletMeta Checkpoint

tablet_rowset_stale_sweep_time_sec

  • Type: int64
  • Description: It is used to control the expiration time of cleaning up the merged rowset version. When the current time now() minus the max created rowset‘s create time in a version path is greater than tablet_rowset_stale_sweep_time_sec, the current path is cleaned up and these merged rowsets are deleted, the unit is second.
  • Default: 1800

When writing is too frequent and the disk time is insufficient, you can configure less tablet_rowset_stale_sweep_time_sec. However, if this time is less than 5 minutes, it may cause fe to query the version that has been merged, causing a query -230 error.

tablet_writer_open_rpc_timeout_sec

Default:300

Update interval of tablet state cache, unit: second

tablet_writer_ignore_eovercrowded

  • Type: bool
  • Description: Used to ignore brpc error ‘[E1011]The server is overcrowded’ when writing data.
  • Default value: false

When meet ‘[E1011]The server is overcrowded’ error, you can tune the configuration brpc_socket_max_unwritten_bytes, but it can’t be modified at runtime. Set it to true to avoid writing failed temporarily. Notice that, it only effects write, other rpc requests will still check if overcrowded.

tc_free_memory_rate

Default:20 (%)

Available memory, value range: [0-100]

tc_max_total_thread_cache_bytes

If the system is found to be in a high-stress scenario and a large number of threads are found in the tcmalloc lock competition phase through the BE thread stack, such as a large number of SpinLock related stacks, you can try increasing this parameter to improve system performance. ReferenceBE Configuration - 图3 (opens new window)

tc_use_memory_min

Default:10737418240

The minimum memory of TCmalloc, when the memory used is less than this, it is not returned to the operating system

thrift_client_retry_interval_ms

  • Type: int64
  • Description: Used to set retry interval for thrift client in be to avoid avalanche disaster in fe thrift server, the unit is ms.
  • Default: 1000

thrift_connect_timeout_seconds

Default:3

The default thrift client connection timeout time (unit: seconds)

thrift_rpc_timeout_ms

Default:5000

thrift default timeout time, default: 5 seconds

thrift_server_type_of_fe

This configuration indicates the service model used by FE’s Thrift service. The type is string and is case-insensitive. This parameter needs to be consistent with the setting of fe’s thrift_server_type parameter. Currently there are two values for this parameter, THREADED and THREAD_POOL.

If the parameter is THREADED, the model is a non-blocking I/O model,

If the parameter is THREAD_POOL, the model is a blocking I/O model.

total_permits_for_compaction_score

  • Type: int64
  • Description: The upper limit of “permits” held by all compaction tasks. This config can be set to limit memory consumption for compaction.
  • Default: 10000
  • Dynamically modify: true

trash_file_expire_time_sec

Default:259200

The interval for cleaning the recycle bin is 72 hours. When the disk space is insufficient, the file retention period under trash may not comply with this parameter

txn_commit_rpc_timeout_ms

Default:10000

txn submit rpc timeout, the default is 10 seconds

txn_map_shard_size

Default:128

txn_map_lock fragment size, the value is 2^n, n=0,1,2,3,4. This is an enhancement to improve the performance of managing txn

txn_shard_size

Default:1024

txn_lock shard size, the value is 2^n, n=0,1,2,3,4, this is an enhancement function that can improve the performance of submitting and publishing txn

unused_rowset_monitor_interval

Default:30

Time interval for clearing expired Rowset, unit: second

upload_worker_count

Default:1

Maximum number of threads for uploading files

use_mmap_allocate_chunk

Default:false

Whether to use mmap to allocate blocks. If you enable this feature, it is best to increase the value of vm.max_map_count, its default value is 65530. You can use “sysctl -w vm.max_map_count=262144” or “echo 262144> /proc/sys/vm/“ to operate max_map_count as root. When this setting is true, you must set chunk_reserved_bytes_limit to a relatively low Big number, otherwise the performance is very very bad

user_function_dir

${DORIS_HOME}/lib/udf

udf function directory

webserver_num_workers

Default:48

Webserver default number of worker threads

webserver_port

  • Type: int32
  • Description: Service port of http server on BE
  • Default: 8040

write_buffer_size

Default:104857600

The size of the buffer before flashing

zone_map_row_num_threshold

  • Type: int32
  • Description: If the number of rows in a page is less than this value, no zonemap will be created to reduce data expansion
  • Default: 20

aws_log_level

  • Type: int32

  • Description: log level of AWS SDK,

    1. Off = 0,
    2. Fatal = 1,
    3. Error = 2,
    4. Warn = 3,
    5. Info = 4,
    6. Debug = 5,
    7. Trace = 6
  • Default: 3

mem_tracker_level

  • Type: int16
  • Description: The level at which MemTracker is displayed on the Web page equal or lower than this level will be displayed on the Web page

    1. RELEASE = 0
    2. DEBUG = 1
  • Default: 0

max_segment_num_per_rowset

  • Type: int32
  • Description: Used to limit the number of segments in the newly generated rowset when importing. If the threshold is exceeded, the import will fail with error -238. Too many segments will cause compaction to take up a lot of memory and cause OOM errors.
  • Default value: 200

remote_storage_read_buffer_mb

  • Type: int32
  • Description: The cache size used when reading files on hdfs or object storage.
  • Default value: 16MB

Increasing this value can reduce the number of calls to read remote data, but it will increase memory overhead.

external_table_connect_timeout_sec

  • Type: int32
  • Description: The timeout when establishing connection with external table such as ODBC table.
  • Default value: 5 seconds

segment_cache_capacity

  • Type: int32
  • Description: The maximum number of Segments cached by Segment Cache.
  • Default value: 1000000

The default value is currently only an empirical value, and may need to be modified according to actual scenarios. Increasing this value can cache more segments and avoid some IO. Decreasing this value will reduce memory usage.

auto_refresh_brpc_channel

  • Type: bool
  • Description: When obtaining a brpc connection, judge the availability of the connection through hand_shake rpc, and re-establish the connection if it is not available 。
  • Default value: false