Network addresses

This documentation is for the Envoy v3 API.

As of Envoy v1.18 the v2 API has been removed and is no longer supported.

If you are upgrading from v2 API config you may wish to view the v2 API documentation:

api/v2/core/address.proto

config.core.v3.Pipe

[config.core.v3.Pipe proto]

  1. {
  2. "path": "...",
  3. "mode": "..."
  4. }

path

(string, REQUIRED) Unix Domain Socket path. On Linux, paths starting with ‘@’ will use the abstract namespace. The starting ‘@’ is replaced by a null byte by Envoy. Paths starting with ‘@’ will result in an error in environments other than Linux.

mode

(uint32) The mode for the Pipe. Not applicable for abstract sockets.

config.core.v3.SocketAddress

[config.core.v3.SocketAddress proto]

  1. {
  2. "protocol": "...",
  3. "address": "...",
  4. "port_value": "...",
  5. "named_port": "...",
  6. "resolver_name": "...",
  7. "ipv4_compat": "..."
  8. }

protocol

(config.core.v3.SocketAddress.Protocol)

address

(string, REQUIRED) The address for this socket. Listeners will bind to the address. An empty address is not allowed. Specify 0.0.0.0 or :: to bind to any address. When used within an upstream BindConfig, the address controls the source address of outbound connections. For clusters, the cluster type determines whether the address must be an IP (STATIC or EDS clusters) or a hostname resolved by DNS (STRICT_DNS or LOGICAL_DNS clusters). Address resolution can be customized via resolver_name.

port_value

(uint32)

Precisely one of port_value, named_port must be set.

named_port

(string) This is only valid if resolver_name is specified below and the named resolver is capable of named port resolution.

Precisely one of port_value, named_port must be set.

resolver_name

(string) The name of the custom resolver. This must have been registered with Envoy. If this is empty, a context dependent default applies. If the address is a concrete IP address, no resolution will occur. If address is a hostname this should be set for resolution other than DNS. Specifying a custom resolver with STRICT_DNS or LOGICAL_DNS will generate an error at runtime.

ipv4_compat

(bool) When binding to an IPv6 address above, this enables IPv4 compatibility. Binding to :: will allow both IPv4 and IPv6 connections, with peer IPv4 addresses mapped into IPv6 space as ::FFFF:<IPv4-address>.

Enum config.core.v3.SocketAddress.Protocol

[config.core.v3.SocketAddress.Protocol proto]

TCP

(DEFAULT)

UDP

config.core.v3.TcpKeepalive

[config.core.v3.TcpKeepalive proto]

  1. {
  2. "keepalive_probes": "{...}",
  3. "keepalive_time": "{...}",
  4. "keepalive_interval": "{...}"
  5. }

keepalive_probes

(UInt32Value) Maximum number of keepalive probes to send without response before deciding the connection is dead. Default is to use the OS level configuration (unless overridden, Linux defaults to 9.)

keepalive_time

(UInt32Value) The number of seconds a connection needs to be idle before keep-alive probes start being sent. Default is to use the OS level configuration (unless overridden, Linux defaults to 7200s (i.e., 2 hours.)

keepalive_interval

(UInt32Value) The number of seconds between keep-alive probes. Default is to use the OS level configuration (unless overridden, Linux defaults to 75s.)

config.core.v3.BindConfig

[config.core.v3.BindConfig proto]

  1. {
  2. "source_address": "{...}",
  3. "freebind": "{...}",
  4. "socket_options": []
  5. }

source_address

(config.core.v3.SocketAddress, REQUIRED) The address to bind to when creating a socket.

freebind

(BoolValue) Whether to set the IP_FREEBIND option when creating the socket. When this flag is set to true, allows the source_address to be an IP address that is not configured on the system running Envoy. When this flag is set to false, the option IP_FREEBIND is disabled on the socket. When this flag is not set (default), the socket is not modified, i.e. the option is neither enabled nor disabled.

socket_options

(repeated config.core.v3.SocketOption) Additional socket options that may not be present in Envoy source code or precompiled binaries.

config.core.v3.Address

[config.core.v3.Address proto]

Addresses specify either a logical or physical address and port, which are used to tell Envoy where to bind/listen, connect to upstream and find management servers.

  1. {
  2. "socket_address": "{...}",
  3. "pipe": "{...}"
  4. }

socket_address

(config.core.v3.SocketAddress)

Precisely one of socket_address, pipe must be set.

pipe

(config.core.v3.Pipe)

Precisely one of socket_address, pipe must be set.

config.core.v3.CidrRange

[config.core.v3.CidrRange proto]

CidrRange specifies an IP Address and a prefix length to construct the subnet mask for a CIDR range.

  1. {
  2. "address_prefix": "...",
  3. "prefix_len": "{...}"
  4. }

address_prefix

(string, REQUIRED) IPv4 or IPv6 address, e.g. 192.0.0.0 or 2001:db8::.

prefix_len

(UInt32Value) Length of prefix, e.g. 0, 32. Defaults to 0 when unset.