Deployment

Flink is a versatile framework, supporting many different deployment scenarios in a mix and match fashion.

Below, we briefly explain the building blocks of a Flink cluster, their purpose and available implementations. If you just want to start Flink locally, we recommend setting up a Standalone Cluster.

Overview and Reference Architecture

The figure below shows the building blocks of every Flink cluster. There is always somewhere a client running. It takes the code of the Flink applications, transforms it into a JobGraph and submits it to the JobManager.

The JobManager distributes the work onto the TaskManagers, where the actual operators (such as sources, transformations and sinks) are running.

When deploying Flink, there are often multiple options available for each building block. We have listed them in the table below the figure.

Figure for Overview and Reference Architecture

ComponentPurposeImplementations
Flink ClientCompiles batch or streaming applications into a dataflow graph, which it then submits to the JobManager.
JobManagerJobManager is the name of the central work coordination component of Flink. It has implementations for different resource providers, which differ on high-availability, resource allocation behavior and supported job submission modes.
JobManager modes for job submissions:
  • Application Mode: runs the cluster exclusively for one application. The job’s main method (or client) gets executed on the JobManager. Calling execute/executeAsync multiple times in an application is supported.
  • Per-Job Mode: runs the cluster exclusively for one job. The job’s main method (or client) runs only prior to the cluster creation.
  • Session Mode: one JobManager instance manages multiple jobs sharing the same cluster of TaskManagers
TaskManagerTaskManagers are the services actually performing the work of a Flink job.
External Components (all optional)
High Availability Service ProviderFlink’s JobManager can be run in high availability mode which allows Flink to recover from JobManager faults. In order to failover faster, multiple standby JobManagers can be started to act as backups.
File Storage and PersistencyFor checkpointing (recovery mechanism for streaming jobs) Flink relies on external file storage systemsSee FileSystems page.
Resource ProviderFlink can be deployed through different Resource Provider Frameworks, such as Kubernetes or YARN.See JobManager implementations above.
Metrics StorageFlink components report internal metrics and Flink jobs can report additional, job specific metrics as well.See Metrics Reporter page.
Application-level data sources and sinksWhile application-level data sources and sinks are not technically part of the deployment of Flink cluster components, they should be considered when planning a new Flink production deployment. Colocating frequently used data with Flink can have significant performance benefitsFor example:
  • Apache Kafka
  • Amazon S3
  • ElasticSearch
  • Apache Cassandra
See Connectors page.

Deployment Modes

Flink can execute applications in one of three ways:

  • in Application Mode,
  • in a Per-Job Mode,
  • in Session Mode.

The above modes differ in:

  • the cluster lifecycle and resource isolation guarantees
  • whether the application’s main() method is executed on the client or on the cluster.

Figure for Deployment Modes

Application Mode

In all the other modes, the application’s main() method is executed on the client side. This process includes downloading the application’s dependencies locally, executing the main() to extract a representation of the application that Flink’s runtime can understand (i.e. the JobGraph) and ship the dependencies and the JobGraph(s) to the cluster. This makes the Client a heavy resource consumer as it may need substantial network bandwidth to download dependencies and ship binaries to the cluster, and CPU cycles to execute the main(). This problem can be more pronounced when the Client is shared across users.

Building on this observation, the Application Mode creates a cluster per submitted application, but this time, the main() method of the application is executed on the JobManager. Creating a cluster per application can be seen as creating a session cluster shared only among the jobs of a particular application, and torn down when the application finishes. With this architecture, the Application Mode provides the same resource isolation and load balancing guarantees as the Per-Job mode, but at the granularity of a whole application. Executing the main() on the JobManager allows for saving the CPU cycles required, but also save the bandwidth required for downloading the dependencies locally. Furthermore, it allows for more even spread of the network load for downloading the dependencies of the applications in the cluster, as there is one JobManager per application.

In the Application Mode, the main() is executed on the cluster and not on the client, as in the other modes. This may have implications for your code as, for example, any paths you register in your environment using the registerCachedFile() must be accessible by the JobManager of your application.

Compared to the Per-Job mode, the Application Mode allows the submission of applications consisting of multiple jobs. The order of job execution is not affected by the deployment mode but by the call used to launch the job. Using execute(), which is blocking, establishes an order and it will lead to the execution of the “next” job being postponed until “this” job finishes. Using executeAsync(), which is non-blocking, will lead to the “next” job starting before “this” job finishes.

The Application Mode allows for multi-execute() applications but High-Availability is not supported in these cases. High-Availability in Application Mode is only supported for single-execute() applications.

Additionally, when any of multiple running jobs in Application Mode (submitted for example using executeAsync()) gets cancelled, all jobs will be stopped and the JobManager will shut down. Regular job completions (by the sources shutting down) are supported.

Per-Job Mode

Aiming at providing better resource isolation guarantees, the Per-Job mode uses the available resource provider framework (e.g. YARN, Kubernetes) to spin up a cluster for each submitted job. This cluster is available to that job only. When the job finishes, the cluster is torn down and any lingering resources (files, etc) are cleared up. This provides better resource isolation, as a misbehaving job can only bring down its own TaskManagers. In addition, it spreads the load of book-keeping across multiple JobManagers, as there is one per job. For these reasons, the Per-Job resource allocation model is the preferred mode by many production reasons.

Session Mode

Session mode assumes an already running cluster and uses the resources of that cluster to execute any submitted application. Applications executed in the same (session) cluster use, and consequently compete for, the same resources. This has the advantage that you do not pay the resource overhead of spinning up a full cluster for every submitted job. But, if one of the jobs misbehaves or brings down a TaskManager, then all jobs running on that TaskManager will be affected by the failure. This, apart from a negative impact on the job that caused the failure, implies a potential massive recovery process with all the restarting jobs accessing the filesystem concurrently and making it unavailable to other services. Additionally, having a single cluster running multiple jobs implies more load for the JobManager, who is responsible for the book-keeping of all the jobs in the cluster.

Summary

In Session Mode, the cluster lifecycle is independent of that of any job running on the cluster and the resources are shared across all jobs. The Per-Job mode pays the price of spinning up a cluster for every submitted job, but this comes with better isolation guarantees as the resources are not shared across jobs. In this case, the lifecycle of the cluster is bound to that of the job. Finally, the Application Mode creates a session cluster per application and executes the application’s main() method on the cluster.

Vendor Solutions

A number of vendors offer managed or fully hosted Flink solutions. None of these vendors are officially supported or endorsed by the Apache Flink PMC. Please refer to vendor maintained documentation on how to use these products.

AliCloud Realtime Compute

Website

Supported Environments: AliCloud

Amazon EMR

Website

Supported Environments: AWS

Website

Supported Environments: AWS

Cloudera DataFlow

Website

Supported Environment: AWS Azure Google On-Premise

Eventador

Website

Supported Environment: AWS

Huawei Cloud Stream Service

Website

Supported Environment: Huawei

Ververica Platform

Website

Supported Environments: AliCloud AWS Azure Google On-Premise