Batch Shuffle

Overview

Flink supports a batch execution mode in both DataStream API and Table / SQL for jobs executing across bounded input. In batch execution mode, Flink offers two modes for network exchanges: Blocking Shuffle and Hybrid Shuffle.

  • Blocking Shuffle is the default data exchange mode for batch executions. It persists all intermediate data, and can be consumed only after fully produced.
  • Hybrid Shuffle is the next generation data exchange mode for batch executions. It persists data more smartly, and allows consuming while being produced. This feature is still experimental and has some known limitations.

Blocking Shuffle

Unlike the pipeline shuffle used for streaming applications, blocking exchanges persists data to some storage. Downstream tasks then fetch these values via the network. Such an exchange reduces the resources required to execute the job as it does not need the upstream and downstream tasks to run simultaneously.

As a whole, Flink provides two different types of blocking shuffles: Hash shuffle and Sort shuffle.

Hash Shuffle

The default blocking shuffle implementation for 1.14 and lower, Hash Shuffle, has each upstream task persist its results in a separate file for each downstream task on the local disk of the TaskManager. When the downstream tasks run, they will request partitions from the upstream TaskManager’s, which read the files and transmit data via the network.

Hash Shuffle provides different mechanisms for writing and reading files:

  • file: Writes files with the normal File IO, reads and transmits files with Netty FileRegion. FileRegion relies on sendfile system call to reduce the number of data copies and memory consumption.
  • mmap: Writes and reads files with mmap system call.
  • auto: Writes files with the normal File IO, for file reading, it falls back to normal file option on 32 bit machine and use mmap on 64 bit machine. This is to avoid file size limitation of java mmap implementation on 32 bit machine.

The different mechanism could be chosen via TaskManager configurations.

This option is experimental and might be changed future.

If SSL is enabled, the file mechanism can not use FileRegion and instead uses an un-pooled buffer to cache data before transmitting. This might cause direct memory OOM. Additionally, since the synchronous file reading might block Netty threads for some time, the SSL handshake timeout needs to be increased to avoid connection reset errors.

The memory usage of mmap is not accounted for by configured memory limits, but some resource frameworks like Yarn will track this memory usage and kill the container if memory exceeds some threshold.

Hash Shuffle works well for small scale jobs with SSD, but it also have some disadvantages:

  1. If the job scale is large, it might create too many files, and it requires a large write buffer to write these files at the same time.
  2. On HDD, when multiple downstream tasks fetch their data simultaneously, it might incur the issue of random IO.

Sort Shuffle

Sort Shuffle is another blocking shuffle implementation introduced in version 1.13 and it becomes the default blocking shuffle implementation in 1.15. Different from Hash Shuffle, Sort Shuffle writes only one file for each result partition. When the result partition is read by multiple downstream tasks concurrently, the data file is opened only once and shared by all readers. As a result, the cluster uses fewer resources like inode and file descriptors, which improves stability. Furthermore, by writing fewer files and making a best effort to read data sequentially, Sort Shuffle can achieve better performance than Hash Shuffle, especially on HDD. Additionally, Sort Shuffle uses extra managed memory as data reading buffer and does not rely on sendfile or mmap mechanism, thus it also works well with SSL. Please refer to FLINK-19582 and FLINK-19614 for more details about Sort Shuffle.

Here are some config options that might need adjustment when using sort blocking shuffle:

Currently Sort Shuffle only sort records by partition index instead of the records themselves, that is to say, the sort is only used as a data clustering algorithm.

Choices of Blocking Shuffle

As a summary,

  • For small scale jobs running on SSD, both implementation should work.
  • For large scale jobs or for jobs running on HDD, Sort Shuffle should be more suitable.

To switch between Sort Shuffle and Hash Shuffle, you need to adjust this config option: taskmanager.network.sort-shuffle.min-parallelism. It controls which shuffle implementation to use based on the parallelism of downstream tasks, if the parallelism is lower than the configured value, Hash Shuffle will be used, otherwise Sort Shuffle will be used. For versions lower than 1.15, its default value is Integer.MAX_VALUE, so Hash Shuffle will be used by default. Since 1.15, its default value is 1, so Sort Shuffle will be used by default.

Hybrid Shuffle

This feature is still experimental and has some known limitations.

Hybrid shuffle is the next generation of batch data exchanges. It combines the advantages of blocking shuffle and pipelined shuffle (in streaming mode).

  • Like blocking shuffle, it does not require upstream and downstream tasks to run simultaneously, which allows executing a job with little resources.
  • Like pipelined shuffle, it does not require downstream tasks to be executed after upstream tasks finish, which reduces the overall execution time of the job when given sufficient resources.
  • It adapts to custom preferences between persisting less data and restarting less tasks on failures, by providing different spilling strategies.

Spilling Strategy

Hybrid shuffle provides two spilling strategies:

  • Selective Spilling Strategy persists data only if they are not consumed by downstream tasks timely. This reduces the amount of data to persist, at the price that in case of failures upstream tasks need to be restarted to reproduce the complete intermediate results.
  • Full Spilling Strategy persists all data, no matter they are consumed by downstream tasks or not. In case of failures, the persisted complete intermediate result can be re-consumed, without having to restart upstream tasks.

Usage

To use hybrid shuffle mode, you need to configure the execution.batch-shuffle-mode to ALL_EXCHANGES_HYBRID_FULL (full spilling strategy) or ALL_EXCHANGES_HYBRID_SELECTIVE (selective spilling strategy).

Limitations

Hybrid shuffle mode is still experimental and has some known limitations, which the Flink community is still working on eliminating.

  • No support for Slot Sharing. In hybrid shuffle mode, Flink currently forces each task to be executed in a dedicated slot exclusively. If slot sharing is explicitly specified, an error will occur.
  • No support for Adaptive Batch Scheduler and Speculative Execution. If adaptive batch scheduler is used in hybrid shuffle mode, an error will occur.

Performance Tuning

The following guidelines may help you to achieve better performance especially for large scale batch jobs:

Blocking Shuffle

  1. Always use Sort Shuffle on HDD because Sort Shuffle can largely improve stability and IO performance. Since 1.15, Sort Shuffle is already the default blocking shuffle implementation, for 1.14 and lower version, you need to enable it manually by setting taskmanager.network.sort-shuffle.min-parallelism to 1.
  2. For both blocking shuffle implementations, you may consider enabling data compression to improve the performance unless the data is hard to compress. Since 1.15, data compression is already enabled by default, for 1.14 and lower version, you need to enable it manually.
  3. When Sort Shuffle is used, decreasing the number of exclusive buffers per channel and increasing the number of floating buffers per gate can help. For 1.14 and higher version, it is suggested to set taskmanager.network.memory.buffers-per-channel to 0 and set taskmanager.network.memory.floating-buffers-per-gate to a larger value (for example, 4096). This setting has two main advantages: 1) It decouples the network memory consumption from parallelism so for large scale jobs, the possibility of “Insufficient number of network buffers” error can be decreased; 2) Networker buffers are distributed among different channels according to needs, which can improve the network buffer utilization and further improve performance.
  4. Increase the total size of network memory. Currently, the default network memory size is pretty modest. For large scale jobs, it’s suggested to increase the total network memory fraction to at least 0.2 to achieve better performance. At the same time, you may also need to adjust the lower bound and upper bound of the network memory size, please refer to the memory configuration document for more information.
  5. Increase the memory size for shuffle data write. As mentioned in the above section, for large scale jobs, it’s suggested to increase the number of write buffers per result partition to at least (2 * parallelism) if you have enough memory. Note that you may also need to increase the total size of network memory to avoid the “Insufficient number of network buffers” error after you increase this config value.
  6. Increase the memory size for shuffle data read. As mentioned in the above section, for large scale jobs, it’s suggested to increase the size of the shared read memory to a larger value (for example, 256M or 512M). Because this memory is cut from the framework off-heap memory, you must increase taskmanager.memory.framework.off-heap.size by the same size to avoid the direct memory OOM error.

    Hybrid Shuffle

  7. Increase the total size of network memory. Currently, the default network memory size is pretty modest. For large scale jobs, it’s suggested to increase the total network memory fraction to at least 0.2 to achieve better performance. At the same time, you may also need to adjust the lower bound and upper bound of the network memory size, please refer to the memory configuration document for more information.

  8. Increase the memory size for shuffle data write. For large scale jobs, it’s suggested to increase the total size of network memory, the larger the memory that can be used in the shuffle write phase, the more opportunities downstream to read data directly from memory. You need to ensure that each Result Partition can be allocated to at least numSubpartition + 1 buffers, otherwise the “Insufficient number of network buffers” will be encountered.
  9. Increase the memory size for shuffle data read. For large scale jobs, it’s suggested to increase the size of the shared read memory to a larger value (for example, 256M or 512M). Because this memory is cut from the framework off-heap memory, you must increase taskmanager.memory.framework.off-heap.size by the same size to avoid the direct memory OOM error.

Trouble Shooting

Here are some exceptions you may encounter (rarely) and the corresponding solutions that may help:

Blocking Shuffle

ExceptionsPotential Solutions
Insufficient number of network buffersThis means the amount of network memory is not enough to run the target job and you need to increase the total network memory size. Note that since 1.15, Sort Shuffle has become the default blocking shuffle implementation and for some cases, it may need more network memory than before, which means there is a small possibility that your batch jobs may suffer from this issue after upgrading to 1.15. If this is the case, you just need to increase the total network memory size.
Too many open filesThis means that the file descriptors is not enough. If you are using Hash Shuffle, please switch to Sort Shuffle. If you are already using Sort Shuffle, please consider increasing the system limit for file descriptor and check if the user code consumes too many file descriptors.
Connection reset by peerThis usually means that the network is unstable or or under heavy burden. Other issues like SSL handshake timeout mentioned above may also cause this problem. If you are using Hash Shuffle, please switch to Sort Shuffle. If you are already using Sort Shuffle, increasing the network backlog may help.
Network connection timeoutThis usually means that the network is unstable or under heavy burden and increasing the network connection timeout or enable connection retry may help.
Socket read/write timeoutThis may indicate that the network is slow or under heavy burden and increasing the network send/receive buffer size may help. If the job is running in Kubernetes environment, using host network may also help.
Read buffer request timeoutThis can happen only when you are using Sort Shuffle and it means a fierce contention of the shuffle read memory. To solve the issue, you can increase taskmanager.memory.framework.off-heap.batch-shuffle.size together with taskmanager.memory.framework.off-heap.size.
No space left on deviceThis usually means that the disk space or the inodes have been exhausted. Please consider extending the storage space or do some cleanup.
Out of memory errorIf you are using Hash Shuffle, please switch to Sort Shuffle. If you are already using Sort Shuffle and following the above guidelines, please consider increasing the corresponding memory size. For heap memory, you can increase taskmanager.memory.task.heap.size and for direct memory, you can increase taskmanager.memory.task.off-heap.size.
Container killed by external resource mangerThere are several reasons which can lead to the killing of a container, for example, kill a low priority container to make room for high priority container or the container uses too many resources like memory and disk space. As mentioned in the above section, Hash Shuffle may use too much memory and gets killed by YARN. So if you are using Hash Shuffle, please switch to Sort Shuffle. If Sort Shuffle is already used, you may need to check both Flink log and the external resource manager log to find out the root cause and resolve it accordingly.

Hybrid Shuffle

ExceptionsPotential Solutions
Insufficient number of network buffersThis means the amount of network memory is not enough to run the target job and you need to increase the total network memory size.
Connection reset by peerThis usually means that the network is unstable or or under heavy burden. Other issues like SSL handshake timeout may also cause this problem. Increasing the network backlog may help.
Network connection timeoutThis usually means that the network is unstable or under heavy burden and increasing the network connection timeout or enable connection retry may help.
Socket read/write timeoutThis may indicate that the network is slow or under heavy burden and increasing the network send/receive buffer size may help. If the job is running in Kubernetes environment, using host network may also help.
Read buffer request timeoutThis means a fierce contention of the shuffle read memory. To solve the issue, you can increase taskmanager.memory.framework.off-heap.batch-shuffle.size together with taskmanager.memory.framework.off-heap.size.
No space left on deviceThis usually means that the disk space or the inodes have been exhausted. Please consider extending the storage space or do some cleanup.