Syslog

Syslog input plugins allows to collect Syslog messages through a Unix socket server (UDP or TCP) or over the network using TCP or UDP.

Configuration Parameters

The plugin supports the following configuration parameters:

Key Description Default
Mode Defines transport protocol mode: unix_udp (UDP over Unix socket), unix_tcp (TCP over Unix socket), tcp or udp unix_udp
Listen If Mode is set to tcp, specify the network interface to bind. 0.0.0.0
Port If Mode is set to tcp, specify the TCP port to listen for incoming connections. 5140
Path If Mode is set to unix_tcp or unix_udp, set the absolute path to the Unix socket file.
Unix_Perm If Mode is set to unix_tcp or unix_udp, set the permission of the Unix socket file. 0644
Parser Specify an alternative parser for the message. If Mode is set to tcp or udp then the default parser is syslog-rfc5424 otherwise syslog-rfc3164-local is used. If your syslog messages have fractional seconds set this Parser value to syslog-rfc5424 instead.
Buffer_Chunk_Size By default the buffer to store the incoming Syslog messages, do not allocate the maximum memory allowed, instead it allocate memory when is required. The rounds of allocations are set by Buffer_Chunk_Size. If not set, Buffer_Chunk_Size is equal to 32000 bytes (32KB). Read considerations below when using udp or unix_udp mode.
Buffer_Max_Size Specify the maximum buffer size to receive a Syslog message. If not set, the default size will be the value of Buffer_Chunk_Size.

Considerations

  • When using Syslog input plugin, Fluent Bit requires access to the parsers.conf file, the path to this file can be specified with the option -R or through the Parsers_File key on the [SERVER] section (more details below).
  • When udp or unix_udp is used, the buffer size to receive messages is configurable only through the Buffer_Chunk_Size option which defaults to 32kb.

Getting Started

In order to receive Syslog messages, you can run the plugin from the command line or through the configuration file:

Command Line

From the command line you can let Fluent Bit listen for Forward messages with the following options:

  1. $ fluent-bit -R /path/to/parsers.conf -i syslog -p path=/tmp/in_syslog -o stdout

By default the service will create and listen for Syslog messages on the unix socket /tmp/in_syslog

Configuration File

In your main configuration file append the following Input & Output sections:

  1. [SERVICE]
  2. Flush 1
  3. Log_Level info
  4. Parsers_File parsers.conf
  5. [INPUT]
  6. Name syslog
  7. Path /tmp/in_syslog
  8. Buffer_Chunk_Size 32000
  9. Buffer_Max_Size 64000
  10. [OUTPUT]
  11. Name stdout
  12. Match *

Testing

Once Fluent Bit is running, you can send some messages using the logger tool:

  1. $ logger -u /tmp/in_syslog my_ident my_message

In Fluent Bit we should see the following output:

  1. $ bin/fluent-bit -R ../conf/parsers.conf -i syslog -p path=/tmp/in_syslog -o stdout
  2. Fluent Bit v1.x.x
  3. * Copyright (C) 2019-2020 The Fluent Bit Authors
  4. * Copyright (C) 2015-2018 Treasure Data
  5. * Fluent Bit is a CNCF sub-project under the umbrella of Fluentd
  6. * https://fluentbit.io
  7. [2017/03/09 02:23:27] [ info] [engine] started
  8. [0] syslog.0: [1489047822, {"pri"=>"13", "host"=>"edsiper:", "ident"=>"my_ident", "pid"=>"", "message"=>"my_message"}]

Recipes

The following content aims to provide configuration examples for different use cases to integrate Fluent Bit and make it listen for Syslog messages from your systems.

" class="reference-link">Rsyslog to Fluent Bit: Network mode over TCP

Fluent Bit Configuration

Put the following content in your fluent-bit.conf file:

  1. [SERVICE]
  2. Flush 1
  3. Parsers_File parsers.conf
  4. [INPUT]
  5. Name syslog
  6. Parser syslog-rfc3164
  7. Listen 0.0.0.0
  8. Port 5140
  9. Mode tcp
  10. [OUTPUT]
  11. Name stdout
  12. Match *

then start Fluent Bit.

RSyslog Configuration

Add a new file to your rsyslog config rules called 60-fluent-bit.conf inside the directory /etc/rsyslog.d/ and add the following content:

  1. action(type="omfwd" Target="127.0.0.1" Port="5140" Protocol="tcp")

then make sure to restart your rsyslog daemon:

  1. $ sudo service rsyslog restart

Rsyslog to Fluent Bit: Unix socket mode over UDP

Fluent Bit Configuration

Put the following content in your fluent-bit.conf file:

  1. [SERVICE]
  2. Flush 1
  3. Parsers_File parsers.conf
  4. [INPUT]
  5. Name syslog
  6. Parser syslog-rfc3164
  7. Path /tmp/fluent-bit.sock
  8. Mode unix_udp
  9. Unix_Perm 0644
  10. [OUTPUT]
  11. Name stdout
  12. Match *

then start Fluent Bit.

RSyslog Configuration

Add a new file to your rsyslog config rules called 60-fluent-bit.conf inside the directory /etc/rsyslog.d/ and place the following content:

  1. $ModLoad omuxsock
  2. $OMUxSockSocket /tmp/fluent-bit.sock
  3. *.* :omuxsock:

Make sure that the socket file is readable by rsyslog (tweak the Unix_Perm option shown above).