Using Microsoft SQL Server in Grafana

Only available in Grafana v5.1+.

Grafana ships with a built-in Microsoft SQL Server (MSSQL) data source plugin that allows you to query and visualize data from any Microsoft SQL Server 2005 or newer, including Microsoft Azure SQL Database.

Adding the data source

  • Open the side menu by clicking the Grafana icon in the top header.
  • In the side menu under the Configuration link you should find a link named Data Sources.
  • Click the + Add data source button in the top header.
  • Select Microsoft SQL Server from the Type dropdown.

Data source options

NameDescription
NameThe data source name. This is how you refer to the data source in panels & queries.
DefaultDefault data source means that it will be pre-selected for new panels.
HostThe IP address/hostname and optional port of your MSSQL instance. If port is omitted, default 1433 will be used.
DatabaseName of your MSSQL database.
UserDatabase user’s login/username
PasswordDatabase user’s password
EncryptThis option determines whether or to which extent a secure SSL TCP/IP connection will be negotiated with the server, default false (Grafana v5.4+).
Max openThe maximum number of open connections to the database, default unlimited (Grafana v5.4+).
Max idleThe maximum number of connections in the idle connection pool, default 2 (Grafana v5.4+).
Max lifetimeThe maximum amount of time in seconds a connection may be reused, default 14400/4 hours (Grafana v5.4+).

Min time interval

A lower limit for the $__interval and $__interval_ms variables. Recommended to be set to write frequency, for example 1m if your data is written every minute. This option can also be overridden/configured in a dashboard panel under data source options. It’s important to note that this value needs to be formatted as a number followed by a valid time identifier, e.g. 1m (1 minute) or 30s (30 seconds). The following time identifiers are supported:

IdentifierDescription
yyear
Mmonth
wweek
dday
hhour
mminute
ssecond
msmillisecond

Database User Permissions (Important!)

The database user you specify when you add the data source should only be granted SELECT permissions on the specified database & tables you want to query. Grafana does not validate that the query is safe. The query could include any SQL statement. For example, statements like DELETE FROM user; and DROP TABLE user; would be executed. To protect against this we Highly recommend you create a specific MSSQL user with restricted permissions.

Example:

  1. CREATE USER grafanareader WITH PASSWORD 'password'
  2. GRANT SELECT ON dbo.YourTable3 TO grafanareader

Make sure the user does not get any unwanted privileges from the public role.

Known Issues

If you’re using an older version of Microsoft SQL Server like 2008 and 2008R2 you may need to disable encryption to be able to connect. If possible, we recommend you to use the latest service pack available for optimal compatibility.

Query Editor

Microsoft SQL Server - 图1Microsoft SQL Server - 图2

You find the MSSQL query editor in the metrics tab in Graph, Singlestat or Table panel’s edit mode. You enter edit mode by clicking the panel title, then edit. The editor allows you to define a SQL query to select data to be visualized.

  • Select Format as Time series (for use in Graph or Singlestat panel’s among others) or Table (for use in Table panel among others).
  • This is the actual editor where you write your SQL queries.
  • Show help section for MSSQL below the query editor.
  • Show actual executed SQL query. Will be available first after a successful query has been executed.
  • Add an additional query where an additional query editor will be displayed.

Macros

To simplify syntax and to allow for dynamic parts, like date range filters, the query can contain macros.

Macro exampleDescription
$__time(dateColumn)Will be replaced by an expression to rename the column to time. For example, dateColumn as time
$__timeEpoch(dateColumn)Will be replaced by an expression to convert a DATETIME column type to unix timestamp and rename it to time.For example, DATEDIFF(second, ‘1970-01-01’, dateColumn) AS time
$__timeFilter(dateColumn)Will be replaced by a time range filter using the specified column name.For example, dateColumn BETWEEN ‘2017-04-21T05:01:17Z’ AND ‘2017-04-21T05:06:17Z’
$__timeFrom()Will be replaced by the start of the currently active time selection. For example, ‘2017-04-21T05:01:17Z’
$__timeTo()Will be replaced by the end of the currently active time selection. For example, ‘2017-04-21T05:06:17Z’
$__timeGroup(dateColumn,‘5m’[, fillvalue])Will be replaced by an expression usable in GROUP BY clause. Providing a fillValue of NULL or floating value will automatically fill empty series in timerange with that value.For example, CAST(ROUND(DATEDIFF(second, ‘1970-01-01’, time_column)/300.0, 0) as bigint)*300.
$__timeGroup(dateColumn,‘5m’, 0)Same as above but with a fill parameter so missing points in that series will be added by grafana and 0 will be used as value.
$__timeGroup(dateColumn,‘5m’, NULL)Same as above but NULL will be used as value for missing points.
$__timeGroup(dateColumn,‘5m’, previous)Same as above but the previous value in that series will be used as fill value if no value has been seen yet NULL will be used (only available in Grafana 5.3+).
$__timeGroupAlias(dateColumn,‘5m’)Will be replaced identical to $timeGroup but with an added column alias (only available in Grafana 5.3+).
_$unixEpochFilter(dateColumn)Will be replaced by a time range filter using the specified column name with times represented as unix timestamp. For example, _dateColumn > 1494410783 AND dateColumn < 1494497183
$__unixEpochFrom()Will be replaced by the start of the currently active time selection as unix timestamp. For example, 1494410783
$__unixEpochTo()Will be replaced by the end of the currently active time selection as unix timestamp. For example, 1494497183
$__unixEpochNanoFilter(dateColumn)Will be replaced by a time range filter using the specified column name with times represented as nanosecond timestamp. For example, dateColumn > 1494410783152415214 AND dateColumn < 1494497183142514872
$__unixEpochNanoFrom()Will be replaced by the start of the currently active time selection as nanosecond timestamp. For example, 1494410783152415214
$__unixEpochNanoTo()Will be replaced by the end of the currently active time selection as nanosecond timestamp. For example, 1494497183142514872
$__unixEpochGroup(dateColumn,‘5m’, [fillmode])Same as $timeGroup but for times stored as unix timestamp (only available in Grafana 5.3+).
_$unixEpochGroupAlias(dateColumn,‘5m’, [fillmode])_Same as above but also adds a column alias (only available in Grafana 5.3+).

We plan to add many more macros. If you have suggestions for what macros you would like to see, please open an issue in our GitHub repo.

The query editor has a link named Generated SQL that shows up after a query has been executed, while in panel edit mode. Click on it and it will expand and show the raw interpolated SQL string that was executed.

Table queries

If the Format as query option is set to Table then you can basically do any type of SQL query. The table panel will automatically show the results of whatever columns & rows your query returns.

Example database table:

  1. CREATE TABLE [event] (
  2. time_sec bigint,
  3. description nvarchar(100),
  4. tags nvarchar(100),
  5. )
  1. CREATE TABLE [mssql_types] (
  2. c_bit bit, c_tinyint tinyint, c_smallint smallint, c_int int, c_bigint bigint, c_money money, c_smallmoney smallmoney, c_numeric numeric(10,5),
  3. c_real real, c_decimal decimal(10,2), c_float float,
  4. c_char char(10), c_varchar varchar(10), c_text text,
  5. c_nchar nchar(12), c_nvarchar nvarchar(12), c_ntext ntext,
  6. c_datetime datetime, c_datetime2 datetime2, c_smalldatetime smalldatetime, c_date date, c_time time, c_datetimeoffset datetimeoffset
  7. )
  8. INSERT INTO [mssql_types]
  9. SELECT
  10. 1, 5, 20020, 980300, 1420070400, '$20000.15', '£2.15', 12345.12,
  11. 1.11, 2.22, 3.33,
  12. 'char10', 'varchar10', 'text',
  13. N'☺nchar12☺', N'☺nvarchar12☺', N'☺text☺',
  14. GETDATE(), CAST(GETDATE() AS DATETIME2), CAST(GETDATE() AS SMALLDATETIME), CAST(GETDATE() AS DATE), CAST(GETDATE() AS TIME), SWITCHOFFSET(CAST(GETDATE() AS DATETIMEOFFSET), '-07:00'))

Query editor with example query:

Microsoft SQL Server - 图3Microsoft SQL Server - 图4

The query:

  1. SELECT * FROM [mssql_types]

You can control the name of the Table panel columns by using regular AS SQL column selection syntax. Example:

  1. SELECT
  2. c_bit as [column1], c_tinyint as [column2]
  3. FROM
  4. [mssql_types]

The resulting table panel:

Microsoft SQL Server - 图5Microsoft SQL Server - 图6

Time series queries

If you set Format as to Time series, for use in Graph panel for example, then the query must must have a column named time that returns either a sql datetime or any numeric datatype representing unix epoch in seconds. You may return a column named metric that is used as metric name for the value column. Any column except time and metric is treated as a value column. If you omit the metric column, the name of the value column will be the metric name. You may select multiple value columns, each will have its name as metric. If you return multiple value columns and a column named metric then this column is used as prefix for the series name (only available in Grafana 5.3+).

Resultsets of time series queries need to be sorted by time.

Example database table:

  1. CREATE TABLE [event] (
  2. time_sec bigint,
  3. description nvarchar(100),
  4. tags nvarchar(100),
  5. )
  1. CREATE TABLE metric_values (
  2. time datetime,
  3. measurement nvarchar(100),
  4. valueOne int,
  5. valueTwo int,
  6. )
  7. INSERT metric_values (time, measurement, valueOne, valueTwo) VALUES('2018-03-15 12:30:00', 'Metric A', 62, 6)
  8. INSERT metric_values (time, measurement, valueOne, valueTwo) VALUES('2018-03-15 12:30:00', 'Metric B', 49, 11)
  9. ...
  10. INSERT metric_values (time, measurement, valueOne, valueTwo) VALUES('2018-03-15 13:55:00', 'Metric A', 14, 25)
  11. INSERT metric_values (time, measurement, valueOne, valueTwo) VALUES('2018-03-15 13:55:00', 'Metric B', 48, 10)

Microsoft SQL Server - 图7Microsoft SQL Server - 图8

Example with one value and one metric column.

  1. SELECT
  2. time,
  3. valueOne,
  4. measurement as metric
  5. FROM
  6. metric_values
  7. WHERE
  8. $__timeFilter(time)
  9. ORDER BY 1

When above query are used in a graph panel the result will be two series named Metric A and Metric B with value of valueOne and valueTwo plotted over time.

Microsoft SQL Server - 图9Microsoft SQL Server - 图10

Example with multiple value columns:

  1. SELECT
  2. time,
  3. valueOne,
  4. valueTwo
  5. FROM
  6. metric_values
  7. WHERE
  8. $__timeFilter(time)
  9. ORDER BY 1

When above query are used in a graph panel the result will be two series named valueOne and valueTwo with value of valueOne and valueTwo plotted over time.

Microsoft SQL Server - 图11Microsoft SQL Server - 图12

Example using the $__timeGroup macro:

  1. SELECT
  2. $__timeGroup(time, '3m') as time,
  3. measurement as metric,
  4. avg(valueOne)
  5. FROM
  6. metric_values
  7. WHERE
  8. $__timeFilter(time)
  9. GROUP BY
  10. $__timeGroup(time, '3m'),
  11. measurement
  12. ORDER BY 1

When above query are used in a graph panel the result will be two series named Metric A and Metric B with an average of valueOne plotted over time. Any two series lacking a value in a 3 minute window will render a line between those two lines. You’ll notice that the graph to the right never goes down to zero.

Microsoft SQL Server - 图13Microsoft SQL Server - 图14

Example using the $__timeGroup macro with fill parameter set to zero:

  1. SELECT
  2. $__timeGroup(time, '3m', 0) as time,
  3. measurement as metric,
  4. sum(valueTwo)
  5. FROM
  6. metric_values
  7. WHERE
  8. $__timeFilter(time)
  9. GROUP BY
  10. $__timeGroup(time, '3m'),
  11. measurement
  12. ORDER BY 1

When above query are used in a graph panel the result will be two series named Metric A and Metric B with a sum of valueTwo plotted over time. Any series lacking a value in a 3 minute window will have a value of zero which you’ll see rendered in the graph to the right.

Templating

Instead of hard-coding things like server, application and sensor name in you metric queries you can use variables in their place. Variables are shown as dropdown select boxes at the top of the dashboard. These dropdowns makes it easy to change the data being displayed in your dashboard.

Checkout the Templating documentation for an introduction to the templating feature and the different types of template variables.

Query Variable

If you add a template variable of the type Query, you can write a MSSQL query that can return things like measurement names, key names or key values that are shown as a dropdown select box.

For example, you can have a variable that contains all values for the hostname column in a table if you specify a query like this in the templating variable Query setting.

  1. SELECT hostname FROM host

A query can return multiple columns and Grafana will automatically create a list from them. For example, the query below will return a list with values from hostname and hostname2.

  1. SELECT [host].[hostname], [other_host].[hostname2] FROM host JOIN other_host ON [host].[city] = [other_host].[city]

Another option is a query that can create a key/value variable. The query should return two columns that are named text and value. The __text column value should be unique (if it is not unique then the first value is used). The options in the dropdown will have a text and value that allows you to have a friendly name as text and an id as the value. An example query with hostname as the text and id as the value:

  1. SELECT hostname __text, id __value FROM host

You can also create nested variables. For example if you had another variable named region. Then you could have the hosts variable only show hosts from the current selected region with a query like this (if region is a multi-value variable then use the IN comparison operator rather than = to match against multiple values):

  1. SELECT hostname FROM host WHERE region IN ($region)

Using Variables in Queries

From Grafana 4.3.0 to 4.6.0, template variables are always quoted automatically so if it is a string value do not wrap them in quotes in where clauses.

From Grafana 5.0.0, template variable values are only quoted when the template variable is a multi-value.

If the variable is a multi-value variable then use the IN comparison operator rather than = to match against multiple values.

There are two syntaxes:

$<varname> Example with a template variable named hostname:

  1. SELECT
  2. atimestamp time,
  3. aint value
  4. FROM table
  5. WHERE $__timeFilter(atimestamp) and hostname in($hostname)
  6. ORDER BY atimestamp

[[varname]] Example with a template variable named hostname:

  1. SELECT
  2. atimestamp as time,
  3. aint as value
  4. FROM table
  5. WHERE $__timeFilter(atimestamp) and hostname in([[hostname]])
  6. ORDER BY atimestamp

Disabling Quoting for Multi-value Variables

Grafana automatically creates a quoted, comma-separated string for multi-value variables. For example: if server01 and server02 are selected then it will be formatted as: 'server01', 'server02'. Do disable quoting, use the csv formatting option for variables:

${servers:csv}

Read more about variable formatting options in the Variables documentation.

Annotations

Annotations allows you to overlay rich event information on top of graphs. You add annotation queries via the Dashboard menu / Annotations view.

Columns:

NameDescription
timeThe name of the date/time field. Could be a column with a native sql date/time data type or epoch value.
textEvent description field.
tagsOptional field name to use for event tags as a comma separated string.

Example database tables:

  1. CREATE TABLE [events] (
  2. time_sec bigint,
  3. description nvarchar(100),
  4. tags nvarchar(100),
  5. )

We also use the database table defined in Time series queries.

Example query using time column with epoch values:

  1. SELECT
  2. time_sec as time,
  3. description as [text],
  4. tags
  5. FROM
  6. [events]
  7. WHERE
  8. $__unixEpochFilter(time_sec)
  9. ORDER BY 1

Example query using time column of native sql date/time data type:

  1. SELECT
  2. time,
  3. measurement as text,
  4. convert(varchar, valueOne) + ',' + convert(varchar, valueTwo) as tags
  5. FROM
  6. metric_values
  7. WHERE
  8. $__timeFilter(time_column)
  9. ORDER BY 1

Stored procedure support

Stored procedures have been verified to work. However, please note that we haven’t done anything special to support this why there may exist edge cases where it won’t work as you would expect. Stored procedures should be supported in table, time series and annotation queries as long as you use the same naming of columns and return data in the same format as describe above under respective section.

Please note that any macro function will not work inside a stored procedure.

Examples

Microsoft SQL Server - 图15Microsoft SQL Server - 图16

For the following examples the database table defined in Time series queries. Let’s say that we want to visualize 4 series in a graph panel, i.e. all combinations of columns valueOne, valueTwo and measurement. Graph panel to the right visualizes what we want to achieve. To solve this we actually need to use two queries:

First query:

  1. SELECT
  2. $__timeGroup(time, '5m') as time,
  3. measurement + ' - value one' as metric,
  4. avg(valueOne) as valueOne
  5. FROM
  6. metric_values
  7. WHERE
  8. $__timeFilter(time)
  9. GROUP BY
  10. $__timeGroup(time, '5m'),
  11. measurement
  12. ORDER BY 1

Second query:

  1. SELECT
  2. $__timeGroup(time, '5m') as time,
  3. measurement + ' - value two' as metric,
  4. avg(valueTwo) as valueTwo
  5. FROM
  6. metric_values
  7. GROUP BY
  8. $__timeGroup(time, '5m'),
  9. measurement
  10. ORDER BY 1

Stored procedure using time in epoch format

We can define a stored procedure that will return all data we need to render 4 series in a graph panel like above. In this case the stored procedure accepts two parameters @from and @to of int data types which should be a timerange (from-to) in epoch format which will be used to filter the data to return from the stored procedure.

We’re mimicking the $__timeGroup(time, '5m') in the select and group by expressions and that’s why there’s a lot of lengthy expressions needed - these could be extracted to MSSQL functions, if wanted.

  1. CREATE PROCEDURE sp_test_epoch(
  2. @from int,
  3. @to int
  4. ) AS
  5. BEGIN
  6. SELECT
  7. cast(cast(DATEDIFF(second, {d '1970-01-01'}, DATEADD(second, DATEDIFF(second,GETDATE(),GETUTCDATE()), time))/600 as int)*600 as int) as time,
  8. measurement + ' - value one' as metric,
  9. avg(valueOne) as value
  10. FROM
  11. metric_values
  12. WHERE
  13. time >= DATEADD(s, @from, '1970-01-01') AND time <= DATEADD(s, @to, '1970-01-01')
  14. GROUP BY
  15. cast(cast(DATEDIFF(second, {d '1970-01-01'}, DATEADD(second, DATEDIFF(second,GETDATE(),GETUTCDATE()), time))/600 as int)*600 as int),
  16. measurement
  17. UNION ALL
  18. SELECT
  19. cast(cast(DATEDIFF(second, {d '1970-01-01'}, DATEADD(second, DATEDIFF(second,GETDATE(),GETUTCDATE()), time))/600 as int)*600 as int) as time,
  20. measurement + ' - value two' as metric,
  21. avg(valueTwo) as value
  22. FROM
  23. metric_values
  24. WHERE
  25. time >= DATEADD(s, @from, '1970-01-01') AND time <= DATEADD(s, @to, '1970-01-01')
  26. GROUP BY
  27. cast(cast(DATEDIFF(second, {d '1970-01-01'}, DATEADD(second, DATEDIFF(second,GETDATE(),GETUTCDATE()), time))/600 as int)*600 as int),
  28. measurement
  29. ORDER BY 1
  30. END

Then we can use the following query for our graph panel.

  1. DECLARE
  2. @from int = $__unixEpochFrom(),
  3. @to int = $__unixEpochTo()
  4. EXEC dbo.sp_test_epoch @from, @to

Stored procedure using time in datetime format

We can define a stored procedure that will return all data we need to render 4 series in a graph panel like above. In this case the stored procedure accepts two parameters @from and @to of datetime data types which should be a timerange (from-to) which will be used to filter the data to return from the stored procedure.

We’re mimicking the $__timeGroup(time, '5m') in the select and group by expressions and that’s why there’s a lot of lengthy expressions needed - these could be extracted to MSSQL functions, if wanted.

  1. CREATE PROCEDURE sp_test_datetime(
  2. @from datetime,
  3. @to datetime
  4. ) AS
  5. BEGIN
  6. SELECT
  7. cast(cast(DATEDIFF(second, {d '1970-01-01'}, time)/600 as int)*600 as int) as time,
  8. measurement + ' - value one' as metric,
  9. avg(valueOne) as value
  10. FROM
  11. metric_values
  12. WHERE
  13. time >= @from AND time <= @to
  14. GROUP BY
  15. cast(cast(DATEDIFF(second, {d '1970-01-01'}, time)/600 as int)*600 as int),
  16. measurement
  17. UNION ALL
  18. SELECT
  19. cast(cast(DATEDIFF(second, {d '1970-01-01'}, time)/600 as int)*600 as int) as time,
  20. measurement + ' - value two' as metric,
  21. avg(valueTwo) as value
  22. FROM
  23. metric_values
  24. WHERE
  25. time >= @from AND time <= @to
  26. GROUP BY
  27. cast(cast(DATEDIFF(second, {d '1970-01-01'}, time)/600 as int)*600 as int),
  28. measurement
  29. ORDER BY 1
  30. END

Then we can use the following query for our graph panel.

  1. DECLARE
  2. @from datetime = $__timeFrom(),
  3. @to datetime = $__timeTo()
  4. EXEC dbo.sp_test_datetime @from, @to

Alerting

Time series queries should work in alerting conditions. Table formatted queries are not yet supported in alert rule conditions.

Configure the Datasource with Provisioning

It’s now possible to configure datasources using config files with Grafana’s provisioning system. You can read more about how it works and all the settings you can set for datasources on the provisioning docs page

Here are some provisioning examples for this datasource.

  1. apiVersion: 1
  2. datasources:
  3. - name: MSSQL
  4. type: mssql
  5. url: localhost:1433
  6. database: grafana
  7. user: grafana
  8. jsonData:
  9. maxOpenConns: 0 # Grafana v5.4+
  10. maxIdleConns: 2 # Grafana v5.4+
  11. connMaxLifetime: 14400 # Grafana v5.4+
  12. secureJsonData:
  13. password: "Password!"