CREATE AGGREGATE

Defines a new aggregate function.

Synopsis

  1. CREATE [ORDERED] AGGREGATE <name> (<input_data_type> [ , ... ])
  2. ( SFUNC = <sfunc>,
  3. STYPE = <state_data_type>
  4. [, PREFUNC = <prefunc>]
  5. [, FINALFUNC = <ffunc>]
  6. [, INITCOND = <initial_condition>]
  7. [, SORTOP = <sort_operator>] )

Description

CREATE AGGREGATE defines a new aggregate function. Some basic and commonly-used aggregate functions such as count, min, max, sum, avg and so on are already provided in HAWQ. If one defines new types or needs an aggregate function not already provided, then CREATE AGGREGATE can be used to provide the desired features.

An aggregate function is identified by its name and input data types. Two aggregate functions in the same schema can have the same name if they operate on different input types. The name and input data types of an aggregate function must also be distinct from the name and input data types of every ordinary function in the same schema.

An aggregate function is made from one, two or three ordinary functions (all of which must be IMMUTABLE functions):

  • A state transition function
  • An optional preliminary segment-level calculation function
  • An optional final calculation function

These functions are used as follows:

  1. sfunc( internal-state, next-data-values ) ---> next-internal-state
  2. prefunc( internal-state, internal-state ) ---> next-internal-state
  3. ffunc( internal-state ) ---> aggregate-value

You can specify PREFUNC as method for optimizing aggregate execution. By specifying PREFUNC, the aggregate can be executed in parallel on segments first and then on the master. When a two-level execution is performed, SFUNC is executed on the segments to generate partial aggregate results, and PREFUNC is executed on the master to aggregate the partial results from segments. If single-level aggregation is performed, all the rows are sent to the master and is applied to the rows.

Single-level aggregation and two-level aggregation are equivalent execution strategies. Either type of aggregation can be implemented in a query plan. When you implement the functions and , you must ensure that the invocation of on the segment instances followed by on the master produce the same result as single-level aggregation that sends all the rows to the master and then applies only the to the rows.

HAWQ creates a temporary variable of data type to hold the current internal state of the aggregate function. At each input row, the aggregate argument values are calculated and the state transition function is invoked with the current state value and the new argument values to calculate a new internal state value. After all the rows have been processed, the final function is invoked once to calculate the aggregate return value. If there is no final function then the ending state value is returned as-is.

An aggregate function can provide an optional initial condition, an initial value for the internal state value. This is specified and stored in the database as a value of type text, but it must be a valid external representation of a constant of the state value data type. If it is not supplied then the state value starts out NULL.

If the state transition function is declared STRICT, then it cannot be called with NULL inputs. With such a transition function, aggregate execution behaves as follows. Rows with any null input values are ignored (the function is not called and the previous state value is retained). If the initial state value is NULL, then at the first row with all non-null input values, the first argument value replaces the state value, and the transition function is invoked at subsequent rows with all non-null input values. This is useful for implementing aggregates like max. Note that this behavior is only available when is the same as the first . When these types are different, you must supply a non-null initial condition or use a nonstrict transition function.

If the state transition function is not declared STRICT, then it will be called unconditionally at each input row, and must deal with NULL inputs and NULL transition values for itself. This allows the aggregate author to have full control over the aggregate handling of NULL values.

If the final function is declared STRICT, then it will not be called when the ending state value is NULL; instead a NULL result will be returned automatically. (This is the normal behavior of STRICT functions.) In any case the final function has the option of returning a NULL value. For example, the final function for avg returns NULL when it sees there were zero input rows.

Single argument aggregate functions, such as min or max, can sometimes be optimized by looking into an index instead of scanning every input row. If this aggregate can be so optimized, indicate it by specifying a sort operator. The basic requirement is that the aggregate must yield the first element in the sort ordering induced by the operator; in other words:

  1. SELECT agg(col) FROM tab;

must be equivalent to:

  1. SELECT col FROM tab ORDER BY col USING sortop LIMIT 1;

Further assumptions are that the aggregate function ignores NULL inputs, and that it delivers a NULL result if and only if there were no non-null inputs. Ordinarily, a data type’s < operator is the proper sort operator for MIN, and > is the proper sort operator for MAX. Note that the optimization will never actually take effect unless the specified operator is the “less than” or “greater than” strategy member of a B-tree index operator class.

Ordered Aggregates

If the optional qualification ORDERED appears, the created aggregate function is an ordered aggregate. In this case, the preliminary aggregation function, prefunc cannot be specified.

An ordered aggregate is called with the following syntax.

  1. <name> ( <arg> [ , ... ] [ORDER BY <sortspec> [ , ...]] )

If the optional ORDER BY is omitted, a system-defined ordering is used. The transition function of an ordered aggregate function is called on its input arguments in the specified order and on a single segment. There is a new column aggordered in the pg_aggregate table to indicate the aggregate function is defined as an ordered aggregate.

Parameters

The name (optionally schema-qualified) of the aggregate function to create.

An input data type on which this aggregate function operates. To create a zero-argument aggregate function, write * in place of the list of input data types. An example of such an aggregate is count(*).

The name of the state transition function to be called for each input row. For an N-argument aggregate function, the must take N+1 arguments, the first being of type and the rest matching the declared input data types of the aggregate. The function must return a value of type . This function takes the current state value and the current input data values, and returns the next state value.

The data type for the aggregate state value.

The name of a preliminary aggregation function. This is a function of two arguments, both of type . It must return a value of . A preliminary function takes two transition state values and returns a new transition state value representing the combined aggregation. In HAWQ, if the result of the aggregate function is computed in a segmented fashion, the preliminary aggregation function is invoked on the individual internal states in order to combine them into an ending internal state.

Note that this function is also called in hash aggregate mode within a segment. Therefore, if you call this aggregate function without a preliminary function, hash aggregate is never chosen. Since hash aggregate is efficient, consider defining preliminary function whenever possible.

PREFUNC is optional. If defined, it is executed on master. Input to PREFUNC is partial results from segments, and not the tuples. If PREFUNC is not defined, the aggregate cannot be executed in parallel. PREFUNC and gp_enable_multiphase_agg are used as follows:

  • gp_enable_multiphase_agg = off: SFUNC is executed sequentially on master. PREFUNC, even if defined, is unused.
  • gp_enable_multiphase_agg = on and PREFUNC is defined: SFUNC is executed in parallel, on segments. PREFUNC is invoked on master to aggregate partial results from segments.

    1. CREATE OR REPLACE FUNCTION my_avg_accum(bytea,bigint) returns bytea as 'int8_avg_accum' language internal strict immutable;
    2. CREATE OR REPLACE FUNCTION my_avg_merge(bytea,bytea) returns bytea as 'int8_avg_amalg' language internal strict immutable;
    3. CREATE OR REPLACE FUNCTION my_avg_final(bytea) returns numeric as 'int8_avg' language internal strict immutable;
    4. CREATE AGGREGATE my_avg(bigint) ( stype = bytea,sfunc = my_avg_accum,prefunc = my_avg_merge,finalfunc = my_avg_final,initcond = '' );

The name of the final function called to compute the aggregate result after all input rows have been traversed. The function must take a single argument of type state_data_type. The return data type of the aggregate is defined as the return type of this function. If is not specified, then the ending state value is used as the aggregate result, and the return type is .

The initial setting for the state value. This must be a string constant in the form accepted for the data type . If not specified, the state value starts out NULL.

The associated sort operator for a MIN- or MAX-like aggregate function. This is just an operator name (possibly schema-qualified). The operator is assumed to have the same input data types as the aggregate function (which must be a single-argument aggregate function).

Notes

The ordinary functions used to define a new aggregate function must be defined first. Note that in this release of HAWQ, it is required that the , , and functions used to create the aggregate are defined as IMMUTABLE.

Any compiled code (shared library files) for custom functions must be placed in the same location on every host in your HAWQ array (master and all segments). This location must also be in the LD_LIBRARY_PATH so that the server can locate the files.

Examples

Create a sum of cubes aggregate:

  1. CREATE FUNCTION scube_accum(numeric, numeric) RETURNS numeric
  2. AS 'select $1 + $2 * $2 * $2'
  3. LANGUAGE SQL
  4. IMMUTABLE
  5. RETURNS NULL ON NULL INPUT;
  6. CREATE AGGREGATE scube(numeric) (
  7. SFUNC = scube_accum,
  8. STYPE = numeric,
  9. INITCOND = 0 );

To test this aggregate:

  1. CREATE TABLE x(a INT);
  2. INSERT INTO x VALUES (1),(2),(3);
  3. SELECT scube(a) FROM x;

Correct answer for reference:

  1. SELECT sum(a*a*a) FROM x;

Compatibility

CREATE AGGREGATE is a HAWQ language extension. The SQL standard does not provide for user-defined aggregate functions.

See Also

ALTER AGGREGATE, DROP AGGREGATE, CREATE FUNCTION