Getting Started

This guide lets you quickly evaluate Istio. If you are already familiar with Istio or interested in installing other configuration profiles or advanced deployment models, see Customizable Install with istioctl instead.

These steps require you to have a cluster running a compatible version of Kubernetes. You can use any supported platform, for example Minikube or others specified by the platform-specific setup instructions.

Follow these steps to get started with Istio:

  1. Download and install Istio
  2. Deploy the sample application
  3. Open the application to outside traffic
  4. View the dashboard

Download Istio

  1. Go to the Istio release page to download the installation file for your OS, or download and extract the latest release automatically (Linux or macOS):

    1. $ curl -L https://istio.io/downloadIstio | sh -

    The command above downloads the latest release (numerically) of Istio. To download a specific version, you can add a variable on the command line. For example to download Istio 1.4.3, you would run curl -L https://istio.io/downloadIstio | ISTIO_VERSION=1.4.3 sh -

  2. Move to the Istio package directory. For example, if the package is istio-1.6.0:

    1. $ cd istio-1.6.0

    The installation directory contains:

    • Sample applications in samples/
    • The istioctl client binary in the bin/ directory.
  3. Add the istioctl client to your path (Linux or macOS):

    1. $ export PATH=$PWD/bin:$PATH

Install Istio

  1. For this installation, we use the demo configuration profile. It’s selected to have a good set of defaults for testing, but there are other profiles for production or performance testing.

    1. $ istioctl manifest apply --set profile=demo
    2. Component Base installed
    3. Component Pilot installed
    4. Component EgressGateways installed
    5. Component IngressGateways installed
    6. Component AddonComponents installed
    7. Installation complete
  2. Add a namespace label to instruct Istio to automatically inject Envoy sidecar proxies when you deploy your application later:

    1. $ kubectl label namespace default istio-injection=enabled
    2. namespace/default labeled

Deploy the sample application

  1. Deploy the Bookinfo sample application:

    Zip

    1. $ kubectl apply -f @samples/bookinfo/platform/kube/bookinfo.yaml@
    2. service/details created
    3. serviceaccount/bookinfo-details created
    4. deployment.apps/details-v1 created
    5. service/ratings created
    6. serviceaccount/bookinfo-ratings created
    7. deployment.apps/ratings-v1 created
    8. service/reviews created
    9. serviceaccount/bookinfo-reviews created
    10. deployment.apps/reviews-v1 created
    11. deployment.apps/reviews-v2 created
    12. deployment.apps/reviews-v3 created
    13. service/productpage created
    14. serviceaccount/bookinfo-productpage created
    15. deployment.apps/productpage-v1 created
  2. The application will start. As each pod becomes ready, the Istio sidecar will deploy along with it.

    1. $ kubectl get services
    2. NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
    3. details ClusterIP 10.0.0.212 <none> 9080/TCP 29s
    4. kubernetes ClusterIP 10.0.0.1 <none> 443/TCP 25m
    5. productpage ClusterIP 10.0.0.57 <none> 9080/TCP 28s
    6. ratings ClusterIP 10.0.0.33 <none> 9080/TCP 29s
    7. reviews ClusterIP 10.0.0.28 <none> 9080/TCP 29s

    and

    1. $ kubectl get pods
    2. NAME READY STATUS RESTARTS AGE
    3. details-v1-78d78fbddf-tj56d 0/2 PodInitializing 0 2m30s
    4. productpage-v1-85b9bf9cd7-zg7tr 0/2 PodInitializing 0 2m29s
    5. ratings-v1-6c9dbf6b45-5djtx 0/2 PodInitializing 0 2m29s
    6. reviews-v1-564b97f875-dzdt5 0/2 PodInitializing 0 2m30s
    7. reviews-v2-568c7c9d8f-p5wrj 1/2 Running 0 2m29s
    8. reviews-v3-67b4988599-7nhwz 0/2 PodInitializing 0 2m29s

    Re-run the previous command and wait until all pods report READY 2 / 2 and STATUS Running before you go to the next step. This might take a few minutes depending on your platform.

  3. Verify everything is working correctly up to this point. Run this command to see if the app is running inside the cluster and serving HTML pages by checking for the page title in the response:

    1. $ kubectl exec -it $(kubectl get pod -l app=ratings -o jsonpath='{.items[0].metadata.name}') -c ratings -- curl productpage:9080/productpage | grep -o "<title>.*</title>"
    2. <title>Simple Bookstore App</title>

Open the application to outside traffic

The Bookinfo application is deployed but not accessible from the outside. To make it accessible, you need to create an Istio Ingress Gateway, which maps a path to a route at the edge of your mesh.

  1. Associate this application with the Istio gateway:

    Zip

    1. $ kubectl apply -f @samples/bookinfo/networking/bookinfo-gateway.yaml@
    2. gateway.networking.istio.io/bookinfo-gateway created
    3. virtualservice.networking.istio.io/bookinfo created
  2. Ensure that there are no issues with the configuration:

    1. $ istioctl analyze
    2. No validation issues found when analyzing namespace: default.

Determining the ingress IP and ports

Follow these instructions to set the INGRESS_HOST and INGRESS_PORT variables for accessing the gateway. Use the tabs to choose the instructions for your chosen platform:

Set the ingress ports:

  1. $ export INGRESS_PORT=$(kubectl -n istio-system get service istio-ingressgateway -o jsonpath='{.spec.ports[?(@.name=="http2")].nodePort}')
  2. $ export SECURE_INGRESS_PORT=$(kubectl -n istio-system get service istio-ingressgateway -o jsonpath='{.spec.ports[?(@.name=="https")].nodePort}')

Ensure a port was successfully assigned to each environment variable:

  1. $ echo $INGRESS_PORT
  2. 32194
  1. $ echo $SECURE_INGRESS_PORT
  2. 31632

Set the ingress IP:

  1. $ export INGRESS_HOST=$(minikube ip)

Ensure an IP address was successfully assigned to the environment variable:

  1. $ echo $INGRESS_HOST
  2. 192.168.4.102

Run this command in a new terminal window to start a Minikube tunnel that sends traffic to your Istio Ingress Gateway:

  1. $ minikube tunnel

Execute the following command to determine if your Kubernetes cluster is running in an environment that supports external load balancers:

  1. $ kubectl get svc istio-ingressgateway -n istio-system
  2. NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
  3. istio-ingressgateway LoadBalancer 172.21.109.129 130.211.10.121 80:31380/TCP,443:31390/TCP,31400:31400/TCP 17h

If the EXTERNAL-IP value is set, your environment has an external load balancer that you can use for the ingress gateway. If the EXTERNAL-IP value is <none> (or perpetually <pending>), your environment does not provide an external load balancer for the ingress gateway. In this case, you can access the gateway using the service’s node port.

Choose the instructions corresponding to your environment:

Follow these instructions if you have determined that your environment has an external load balancer.

Set the ingress IP and ports:

  1. $ export INGRESS_HOST=$(kubectl -n istio-system get service istio-ingressgateway -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
  2. $ export INGRESS_PORT=$(kubectl -n istio-system get service istio-ingressgateway -o jsonpath='{.spec.ports[?(@.name=="http2")].port}')
  3. $ export SECURE_INGRESS_PORT=$(kubectl -n istio-system get service istio-ingressgateway -o jsonpath='{.spec.ports[?(@.name=="https")].port}')

In certain environments, the load balancer may be exposed using a host name, instead of an IP address. In this case, the ingress gateway’s EXTERNAL-IP value will not be an IP address, but rather a host name, and the above command will have failed to set the INGRESS_HOST environment variable. Use the following command to correct the INGRESS_HOST value:

  1. $ export INGRESS_HOST=$(kubectl -n istio-system get service istio-ingressgateway -o jsonpath='{.status.loadBalancer.ingress[0].hostname}')

Follow these instructions if your environment does not have an external load balancer and choose a node port instead.

Set the ingress ports:

  1. $ export INGRESS_PORT=$(kubectl -n istio-system get service istio-ingressgateway -o jsonpath='{.spec.ports[?(@.name=="http2")].nodePort}')
  2. $ export SECURE_INGRESS_PORT=$(kubectl -n istio-system get service istio-ingressgateway -o jsonpath='{.spec.ports[?(@.name=="https")].nodePort}')

GKE:

  1. $ export INGRESS_HOST=<workerNodeAddress>

You need to create firewall rules to allow the TCP traffic to the ingressgateway service’s ports. Run the following commands to allow the traffic for the HTTP port, the secure port (HTTPS) or both:

  1. $ gcloud compute firewall-rules create allow-gateway-http --allow tcp:$INGRESS_PORT
  2. $ gcloud compute firewall-rules create allow-gateway-https --allow tcp:$SECURE_INGRESS_PORT

Docker For Desktop:

  1. $ export INGRESS_HOST=127.0.0.1

Other environments (e.g., IBM Cloud Private, etc.):

  1. $ export INGRESS_HOST=$(kubectl get po -l istio=ingressgateway -n istio-system -o jsonpath='{.items[0].status.hostIP}')
  1. Set GATEWAY_URL:

    1. $ export GATEWAY_URL=$INGRESS_HOST:$INGRESS_PORT
  2. Ensure an IP address and port were successfully assigned to the environment variable:

    1. $ echo $GATEWAY_URL
    2. 192.168.99.100:32194

Verify external access

Confirm that the Bookinfo application is accessible from outside by viewing the Bookinfo product page using a browser.

  1. Run the following command to retrieve the external address of the Bookinfo application.

    1. $ echo http://$GATEWAY_URL/productpage
  2. Paste the output from the previous command into your web browser and confirm that the Bookinfo product page is displayed.

View the dashboard

Istio has several optional dashboards installed by the demo installation. The Kiali dashboard helps you understand the structure of your service mesh by displaying the topology and indicates the health of your mesh.

  1. Access the Kiali dashboard. The default user name is admin and default password is admin.

    1. $ istioctl dashboard kiali
  2. In the left navigation menu, select Graph and in the Namespace drop down, select default.

    The Kiali dashboard shows an overview of your mesh with the relationships between the services in the Bookinfo sample application. It also provides filters to visualize the traffic flow.

    Kiali Dashboard

    Kiali Dashboard

Next steps

Congratulations on completing the evaluation installation!

These tasks are a great place for beginners to further evaluate Istio’s features using this demo installation:

Before you customize Istio for production use, see these resources:

Join the Istio community

We welcome you to ask questions and give us feedback by joining the Istio community.

Uninstall

To delete the Bookinfo sample application and its configuration, see Bookinfo cleanup.

The Istio uninstall deletes the RBAC permissions and all resources hierarchically under the istio-system namespace. It is safe to ignore errors for non-existent resources because they may have been deleted hierarchically.

  1. $ istioctl manifest generate --set profile=demo | kubectl delete -f -

The istio-system namespace is not removed by default. If no longer needed, use the following command to remove it:

  1. $ kubectl delete namespace istio-system

See also

Safely Upgrade Istio using a Canary Control Plane Deployment

Simplifying Istio upgrades by offering safe canary deployments of the control plane.

DNS Certificate Management

Provision and manage DNS certificates in Istio.

Introducing the Istio Operator

Introduction to Istio’s new operator-based installation and control plane management feature.

Secure Webhook Management

A more secure way to manage Istio webhooks.

Demystifying Istio’s Sidecar Injection Model

De-mystify how Istio manages to plugin its data-plane components into an existing deployment.

Customizable Install with Istioctl

Install and customize any Istio configuration profile for in-depth evaluation or production use.