Troubleshooting

Solve commonly encountered issues


Jaeger is composed of different components, each potentially running in its own host. It might be the case that one of these moving parts isn’t working properly, causing spans to not be processed and stored. When something goes wrong, make sure to check the items listed here.

Verify the sampling strategy

Before everything else, make sure to confirm what sampling strategy is being used. By default, Jaeger uses a probabilistic sampling strategy, with a 1/1000th chance that the span will be reported. For development purposes or for low-traffic scenarios, however, it’s appropriate to sample every trace.

Typically, the sampling strategy can be set via the environment variables JAEGERSAMPLER_TYPE and JAEGER_SAMPLER_PARAM, but refer to the Jaeger Client’s documentation for the language you are using for more details about which sampling strategies are available. When using the Jaeger _Java Client, the strategy is usually printed out via the logging facility provided by the instrumented application when creating the tracer:

  1. 2018-12-10 16:41:25 INFO Configuration:236 - Initialized tracer=JaegerTracer(..., sampler=ConstSampler(decision=true, tags={sampler.type=const, sampler.param=true}), ...)

When diagnosing why spans are not being received by other components, make sure to configure the client to sample every trace, setting the JAEGER_SAMPLER_TYPE environment variable to const and the JAEGER_SAMPLER_PARAM to 1.

Use the logging reporter

Most Jaeger clients are able to log the spans that are being reported to the logging facility provided by the instrumented application. Typically, this can be done by setting the environment variable JAEGERREPORTER_LOG_SPANS to true, but refer to the Jaeger Client’s documentation for the language you are using. In some languages, specifically in Go and Node.js, there are no de-facto standard logging facilities, so you need to explicitly pass a logger to the Client that implements a very narrow Logger interface defined by the Jaeger Client. When using the Jaeger _Java Client, spans are reported like the following:

  1. 2018-12-10 17:20:54 INFO LoggingReporter:43 - Span reported: e66dc77b8a1e813b:6b39b9c18f8ef082:a56f41e38ca449a4:1 - getAccountFromCache

The log entry above contains three IDs: the trace ID e66dc77b8a1e813b, the span’s ID 6b39b9c18f8ef082 and the span’s parent ID a56f41e38ca449a4. When the backend components have the log level set to debug, the span and trace IDs should be visible on their standard output (see more about that below, under “Increase the logging in the backend components”).

The logging reporter follows the sampling decision made by the sampler, meaning that if the span is logged, it should also reach the agent or collector.

Bypass the Jaeger Agent

By default, the Jaeger Client is configured to send spans via UDP to a Jaeger Agent running on localhost. As some networking setups might drop or block UDP packets, or impose size limits, the Jaeger Client can be configured to bypass the Agent, sending spans directly to the Collector. Some clients, such as the Jaeger Java Client, support the environment variable JAEGERENDPOINT which can be used to specify the Collector’s location, such as http://jaeger-collector:14268/api/traces. Refer to the Jaeger Client’s documentation for the language you are using. When you have configured the JAEGER_ENDPOINT property to the endpoint for the Collector, the Jaeger _Java Client logs the following when the tracer is created:

  1. 2018-12-10 17:06:30 INFO Configuration:236 - Initialized tracer=JaegerTracer(..., reporter=CompositeReporter(reporters=[RemoteReporter(sender=HttpSender(), ...), ...]), ...)

The Jaeger Java Client will not fail when a connection to the Jaeger Collector can’t be established. Spans will be collected and placed in an internal buffer. They might eventually reach the Collector once a connection is established, or get dropped in case the buffer reaches its maximum size.

Increase the logging in the backend components

The Jaeger Agent and Collector provide useful debugging information when the log level is set to debug. Every UDP packet that is received by the Agent is logged, as well as every batch that is sent by the Agent to the Collector. The Collector also logs every batch it receives and logs every span that is stored in the permanent storage.

Here’s what to expect when the Jaeger Agent is started with the —log-level=debug flag:

  1. {"level":"debug","ts":1544458854.5367086,"caller":"processors/thrift_processor.go:113","msg":"Span(s) received by the agent","bytes-received":359}
  2. {"level":"debug","ts":1544458854.5408711,"caller":"tchannel/reporter.go:133","msg":"Span batch submitted by the agent","span-count":3}

On the Collector side, these are the expected log entries when the flag —log-level=debug is specified:

  1. {"level":"debug","ts":1544458854.5406284,"caller":"app/span_handler.go:90","msg":"Span batch processed by the collector.","ok":true}
  2. {"level":"debug","ts":1544458854.5406587,"caller":"app/span_processor.go:105","msg":"Span written to the storage by the collector","trace-id":"e66dc77b8a1e813b","span-id":"6b39b9c18f8ef082"}
  3. {"level":"debug","ts":1544458854.54068,"caller":"app/span_processor.go:105","msg":"Span written to the storage by the collector","trace-id":"e66dc77b8a1e813b","span-id":"d92976b6055e6779"}
  4. {"level":"debug","ts":1544458854.5406942,"caller":"app/span_processor.go:105","msg":"Span written to the storage by the collector","trace-id":"e66dc77b8a1e813b","span-id":"a56f41e38ca449a4"}

Check the /metrics endpoint

For the cases where it’s not possible or desirable to increase the logging on the Collector side, the /metrics endpoint can be used to check if spans for specific services were received. Assuming that the Jaeger Collector is available under a host named jaeger-collector, here’s a sample curl call to obtain the metrics:

  1. curl http://jaeger-collector:14269/metrics

The following metrics are of special interest:

  1. jaeger_collector_spans_received
  2. jaeger_collector_spans_saved_by_svc
  3. jaeger_collector_traces_received
  4. jaeger_collector_traces_saved_by_svc

The first two metrics should have similar values for the same service. Similarly, the two traces metrics should also have similar values. For instance, this is an example of a setup that is working as expected:

  1. jaeger_collector_spans_received{debug="false",format="jaeger",svc="order"} 8
  2. jaeger_collector_spans_saved_by_svc{debug="false",result="ok",svc="order"} 8
  3. jaeger_collector_traces_received{debug="false",format="jaeger",svc="order"} 1
  4. jaeger_collector_traces_saved_by_svc{debug="false",result="ok",svc="order"} 1