添加节点

KubeCube 提供为已有集群添加节点的能力,同时也支持使用 kubeadm 的原生方式添加节点

⚠️ 注意通过 KubeCube 的脚本添加节点时,node 机器需要能够通过 ssh 访问 master 机器,支持公钥和密码两种 ssh 方式,执行脚本前可以在 node 上 ssh 到 master 测试连通性

v1.4.x

向集群添加工作节点

在新节点上执行部署脚本

  1. KUBECUBE_VERSION=v1.4
  1. export CUSTOMIZE="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

设置脚本参数,并按照提示继续运行安装脚本并等待新节点加入集群

  • MASTER_IP 为 master 节点 ip
  1. # if install kubecube on pivot cluster
  2. INSTALL_KUBECUBE_PIVOT="false"
  3. # if install k8s
  4. INSTALL_KUBERNETES="true"
  5. # k8s cni, support now is calico only
  6. CNI="calico"
  7. # there are four node mode below:
  8. # "master" : node will be installed as a master of cluster
  9. # "node-join-master" : node will be install as a worker of cluster to join master
  10. # "control-plane-master" : node will be installed as a master to control plane of cluster
  11. # "node-join-control-plane" : node will be installed as a master to join control plane
  12. NODE_MODE="node-join-master"
  13. # zone has two choice
  14. # 1. "cn" : in mainland
  15. # 2. "others" : out of mainland
  16. ZONE="cn"
  17. # k8s version you want to install
  18. # support now is: 1.19.13, 1.20.9, 1.21.2, 1.22.2, 1.23.5
  19. KUBERNETES_VERSION="1.23.5"
  20. # +optional
  21. # must be set when NODE_MODE="control-plane-master"
  22. # or "node-join-control-plane"
  23. CONTROL_PLANE_ENDPOINT="" #{ip}:{port} , dns
  24. # +optional
  25. # KUBERNETES_BIND_ADDRESS generally is node_ip
  26. # can be set when NODE_MODE="master" ot "control-plane-master"
  27. # default value is $(hostname -I |awk '{print $1}')
  28. KUBERNETES_BIND_ADDRESS="" #{node_ip}
  29. #######################################################################
  30. # member cluster config
  31. # used when INSTALL_KUBECUBE_MEMBER="true"
  32. #######################################################################
  33. # if install kubecube on member cluster
  34. INSTALL_KUBECUBE_MEMBER="false"
  35. # +optional
  36. # KUBECUBE_HOST must be set when as a member cluster to
  37. # join pivot cluster, the value is pivot node ip
  38. KUBECUBE_HOST=""
  39. # +optional
  40. # must be set when INSTALL_KUBECUBE_MEMBER="true"
  41. # this value is the name of member cluster you
  42. # want to take over
  43. MEMBER_CLUSTER_NAME=""
  44. #######################################################################
  45. # ssh config
  46. # used when NODE_MODE="node-join-master" or node-join-control-plane
  47. #######################################################################
  48. # +optional
  49. # master ip means master node ip of cluster
  50. MASTER_IP=""
  51. # +optional
  52. # the user who can access master node, it can be empty
  53. SSH_USER="root"
  54. # +optional
  55. # the port specified to access master node, it can be empty
  56. SSH_PORT=22
  57. # +optional
  58. # must be empty when ACCESS_PRIVATE_KEY_PATH set
  59. # password for master user to access master node
  60. ACCESS_PASSWORD=""
  61. # +optional
  62. # must be empty when ACCESS_PASSWORD set
  63. # ACCESS_PRIVATE_KEY for master user to access master node
  64. ACCESS_PRIVATE_KEY_PATH="/root/.ssh/id_rsa"
  65. #######################################################################
  66. # offline config
  67. # used when offline install choose, must lift offline pkg first
  68. #######################################################################
  69. OFFLINE_INSTALL="false"
  70. OFFLINE_PKG_PATH=""
  71. #######################################################################
  72. # container runtime config
  73. # if value is docker, then use docker as container runtime
  74. # else if value is containerd, then use containerd as container runtime
  75. #######################################################################
  76. CONTAINER_RUNTIME="docker"

向集群的 control-plane 添加 master 节点

在新节点上执行部署脚本

  1. KUBECUBE_VERSION=v1.4
  1. export CUSTOMIZE="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

设置脚本参数,并按照提示继续运行安装脚本并等待新节点加入 control-plane

  • MASTER_IP 需要填已有的 master 节点 ip
  • NODE_MODE 当该模式为 node-join-control-plane 时,需要指定 master 节点们的 CONTROL_PLANE_ENDPOINT(vip)
  • CONTROL_PLANE_ENDPOINT 为高可用 vip
  • 可以根据需要选择适合自己的 ssh 方式
  1. # if install kubecube on pivot cluster
  2. INSTALL_KUBECUBE_PIVOT="false"
  3. # if install k8s
  4. INSTALL_KUBERNETES="true"
  5. # there are four node mode below:
  6. # "master" : node will be installed as a master of cluster
  7. # "node-join-master" : node will be install as a worker of cluster to join master
  8. # "control-plane-master" : node will be installed as a master to control plane of cluster
  9. # "node-join-control-plane" : node will be installed as a master to join control plane
  10. NODE_MODE="node-join-master"
  11. # zone has two choice
  12. # 1. "cn" : in mainland
  13. # 2. "others" : out of mainland
  14. ZONE="cn"
  15. # k8s version you want to install
  16. # support now is: 1.20.9, 1.19.13, 1.18.20, 1.21.2
  17. KUBERNETES_VERSION="1.20.9"
  18. # +optional
  19. # must be set when NODE_MODE="control-plane-master"
  20. # or "node-join-control-plane"
  21. CONTROL_PLANE_ENDPOINT="" #{ip}:{port} , dns
  22. #######################################################################
  23. # member cluster config
  24. # used when INSTALL_KUBECUBE_MEMBER="true"
  25. #######################################################################
  26. # if install kubecube on member cluster
  27. INSTALL_KUBECUBE_MEMBER="false"
  28. # +optional
  29. # KUBECUBE_HOST must be set when as a member cluster to
  30. # join pivot cluster, the value is pivot node ip
  31. KUBECUBE_HOST=""
  32. # +optional
  33. # must be set when INSTALL_KUBECUBE_MEMBER="true"
  34. # this value is the name of member cluster you
  35. # want to take over
  36. MEMBER_CLUSTER_NAME=""
  37. #######################################################################
  38. # ssh config
  39. # used when NODE_MODE="node-join-master" or node-join-control-plane
  40. #######################################################################
  41. # +optional
  42. # master ip means master node ip of cluster
  43. MASTER_IP="y.y.y.y"
  44. # +optional
  45. # the user who can access master node, it can be empty
  46. SSH_USER="root"
  47. # +optional
  48. # the port specified to access master node, it can be empty
  49. SSH_PORT=22
  50. # +optional
  51. # must be empty when ACCESS_PRIVATE_KEY_PATH set
  52. # password for master user to access master node
  53. ACCESS_PASSWORD=""
  54. # +optional
  55. # must be empty when ACCESS_PASSWORD set
  56. # ACCESS_PRIVATE_KEY for master user to access master node
  57. ACCESS_PRIVATE_KEY_PATH="/root/.ssh/id_rsa"
  58. #######################################################################
  59. # offline config
  60. # used when offline install choose, must lift offline pkg first
  61. #######################################################################
  62. OFFLINE_INSTALL="false"
  63. OFFLINE_PKG_PATH=""
  64. #######################################################################
  65. # container runtime config
  66. # if value is docker, then use docker as container runtime
  67. # else if value is containerd, then use containerd as container runtime
  68. #######################################################################
  69. CONTAINER_RUNTIME="containerd"

v1.2.x

向集群添加工作节点

在新节点上执行部署脚本

  1. KUBECUBE_VERSION=v1.2
  1. export CUSTOMIZE="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

设置脚本参数,并按照提示继续运行安装脚本并等待新节点加入集群

  • MASTER_IP 为 master 节点 ip
  1. # if install kubecube on pivot cluster
  2. INSTALL_KUBECUBE_PIVOT="false"
  3. # if install k8s
  4. INSTALL_KUBERNETES="true"
  5. # k8s cni, support now is calico only
  6. CNI="calico"
  7. # there are four node mode below:
  8. # "master" : node will be installed as a master of cluster
  9. # "node-join-master" : node will be install as a worker of cluster to join master
  10. # "control-plane-master" : node will be installed as a master to control plane of cluster
  11. # "node-join-control-plane" : node will be installed as a master to join control plane
  12. NODE_MODE="node-join-master"
  13. # zone has two choice
  14. # 1. "cn" : in mainland
  15. # 2. "others" : out of mainland
  16. ZONE="cn"
  17. # k8s version you want to install
  18. # support now is: 1.19.13, 1.20.9, 1.21.2, 1.22.2, 1.23.5
  19. KUBERNETES_VERSION="1.23.5"
  20. # +optional
  21. # must be set when NODE_MODE="control-plane-master"
  22. # or "node-join-control-plane"
  23. CONTROL_PLANE_ENDPOINT="" #{ip}:{port} , dns
  24. # +optional
  25. # KUBERNETES_BIND_ADDRESS generally is node_ip
  26. # can be set when NODE_MODE="master" ot "control-plane-master"
  27. # default value is $(hostname -I |awk '{print $1}')
  28. KUBERNETES_BIND_ADDRESS="" #{node_ip}
  29. #######################################################################
  30. # member cluster config
  31. # used when INSTALL_KUBECUBE_MEMBER="true"
  32. #######################################################################
  33. # if install kubecube on member cluster
  34. INSTALL_KUBECUBE_MEMBER="false"
  35. # +optional
  36. # KUBECUBE_HOST must be set when as a member cluster to
  37. # join pivot cluster, the value is pivot node ip
  38. KUBECUBE_HOST=""
  39. # +optional
  40. # must be set when INSTALL_KUBECUBE_MEMBER="true"
  41. # this value is the name of member cluster you
  42. # want to take over
  43. MEMBER_CLUSTER_NAME=""
  44. #######################################################################
  45. # ssh config
  46. # used when NODE_MODE="node-join-master" or node-join-control-plane
  47. #######################################################################
  48. # +optional
  49. # master ip means master node ip of cluster
  50. MASTER_IP=""
  51. # +optional
  52. # the user who can access master node, it can be empty
  53. SSH_USER="root"
  54. # +optional
  55. # the port specified to access master node, it can be empty
  56. SSH_PORT=22
  57. # +optional
  58. # must be empty when ACCESS_PRIVATE_KEY_PATH set
  59. # password for master user to access master node
  60. ACCESS_PASSWORD=""
  61. # +optional
  62. # must be empty when ACCESS_PASSWORD set
  63. # ACCESS_PRIVATE_KEY for master user to access master node
  64. ACCESS_PRIVATE_KEY_PATH="/root/.ssh/id_rsa"
  65. #######################################################################
  66. # offline config
  67. # used when offline install choose, must lift offline pkg first
  68. #######################################################################
  69. OFFLINE_INSTALL="false"
  70. OFFLINE_PKG_PATH=""
  71. #######################################################################
  72. # container runtime config
  73. # if value is docker, then use docker as container runtime
  74. # else if value is containerd, then use containerd as container runtime
  75. #######################################################################
  76. CONTAINER_RUNTIME="containerd"

向集群的 control-plane 添加 master 节点

在新节点上执行部署脚本

  1. KUBECUBE_VERSION=v1.2
  1. export CUSTOMIZE="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

设置脚本参数,并按照提示继续运行安装脚本并等待新节点加入 control-plane

  • MASTER_IP 需要填已有的 master 节点 ip
  • NODE_MODE 当该模式为 node-join-control-plane 时,需要指定 master 节点们的 CONTROL_PLANE_ENDPOINT(vip)
  • CONTROL_PLANE_ENDPOINT 为高可用 vip
  • 可以根据需要选择适合自己的 ssh 方式
  1. # if install kubecube on pivot cluster
  2. INSTALL_KUBECUBE_PIVOT="false"
  3. # if install k8s
  4. INSTALL_KUBERNETES="true"
  5. # there are four node mode below:
  6. # "master" : node will be installed as a master of cluster
  7. # "node-join-master" : node will be install as a worker of cluster to join master
  8. # "control-plane-master" : node will be installed as a master to control plane of cluster
  9. # "node-join-control-plane" : node will be installed as a master to join control plane
  10. NODE_MODE="node-join-master"
  11. # zone has two choice
  12. # 1. "cn" : in mainland
  13. # 2. "others" : out of mainland
  14. ZONE="cn"
  15. # k8s version you want to install
  16. # support now is: 1.20.9, 1.19.13, 1.18.20, 1.21.2
  17. KUBERNETES_VERSION="1.20.9"
  18. # +optional
  19. # must be set when NODE_MODE="control-plane-master"
  20. # or "node-join-control-plane"
  21. CONTROL_PLANE_ENDPOINT="" #{ip}:{port} , dns
  22. #######################################################################
  23. # member cluster config
  24. # used when INSTALL_KUBECUBE_MEMBER="true"
  25. #######################################################################
  26. # if install kubecube on member cluster
  27. INSTALL_KUBECUBE_MEMBER="false"
  28. # +optional
  29. # KUBECUBE_HOST must be set when as a member cluster to
  30. # join pivot cluster, the value is pivot node ip
  31. KUBECUBE_HOST=""
  32. # +optional
  33. # must be set when INSTALL_KUBECUBE_MEMBER="true"
  34. # this value is the name of member cluster you
  35. # want to take over
  36. MEMBER_CLUSTER_NAME=""
  37. #######################################################################
  38. # ssh config
  39. # used when NODE_MODE="node-join-master" or node-join-control-plane
  40. #######################################################################
  41. # +optional
  42. # master ip means master node ip of cluster
  43. MASTER_IP="y.y.y.y"
  44. # +optional
  45. # the user who can access master node, it can be empty
  46. SSH_USER="root"
  47. # +optional
  48. # the port specified to access master node, it can be empty
  49. SSH_PORT=22
  50. # +optional
  51. # must be empty when ACCESS_PRIVATE_KEY_PATH set
  52. # password for master user to access master node
  53. ACCESS_PASSWORD=""
  54. # +optional
  55. # must be empty when ACCESS_PASSWORD set
  56. # ACCESS_PRIVATE_KEY for master user to access master node
  57. ACCESS_PRIVATE_KEY_PATH="/root/.ssh/id_rsa"
  58. #######################################################################
  59. # offline config
  60. # used when offline install choose, must lift offline pkg first
  61. #######################################################################
  62. OFFLINE_INSTALL="false"
  63. OFFLINE_PKG_PATH=""
  64. #######################################################################
  65. # container runtime config
  66. # if value is docker, then use docker as container runtime
  67. # else if value is containerd, then use containerd as container runtime
  68. #######################################################################
  69. CONTAINER_RUNTIME="containerd"

v1.1.x

向集群添加工作节点

在新节点上执行部署脚本

  1. KUBECUBE_VERSION=v1.1
  1. export CUSTOMIZE="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

tip: 你可以通过预先下载离线包和镜像来减少部署时间 export PRE_DOWNLOAD="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

设置脚本参数,并按照提示继续运行安装脚本并等待新节点加入集群

  • MASTER_IP 为 master 节点 ip
  1. # if install kubecube on pivot cluster
  2. INSTALL_KUBECUBE_PIVOT="false"
  3. # if install k8s
  4. INSTALL_KUBERNETES="true"
  5. # there are four node mode below:
  6. # "master" : node will be installed as a master of cluster
  7. # "node-join-master" : node will be install as a worker of cluster to join master
  8. # "control-plane-master" : node will be installed as a master to control plane of cluster
  9. # "node-join-control-plane" : node will be installed as a master to join control plane
  10. NODE_MODE="node-join-master"
  11. # zone has two choice
  12. # 1. "cn" : in mainland
  13. # 2. "others" : out of mainland
  14. ZONE="cn"
  15. # k8s version you want to install
  16. # support now is: 1.20.9, 1.19.13, 1.18.20, 1.21.2
  17. KUBERNETES_VERSION="1.20.9"
  18. # +optional
  19. # must be set when NODE_MODE="control-plane-master"
  20. # or "node-join-control-plane"
  21. CONTROL_PLANE_ENDPOINT="" #{ip}:{port} , dns
  22. #######################################################################
  23. # member cluster config
  24. # used when INSTALL_KUBECUBE_MEMBER="true"
  25. #######################################################################
  26. # if install kubecube on member cluster
  27. INSTALL_KUBECUBE_MEMBER="false"
  28. # +optional
  29. # KUBECUBE_HOST must be set when as a member cluster to
  30. # join pivot cluster, the value is pivot node ip
  31. KUBECUBE_HOST=""
  32. # +optional
  33. # must be set when INSTALL_KUBECUBE_MEMBER="true"
  34. # this value is the name of member cluster you
  35. # want to take over
  36. MEMBER_CLUSTER_NAME=""
  37. #######################################################################
  38. # ssh config
  39. # used when NODE_MODE="node-join-master" or node-join-control-plane
  40. #######################################################################
  41. # +optional
  42. # master ip means master node ip of cluster
  43. MASTER_IP="y.y.y.y"
  44. # +optional
  45. # the user who can access master node, it can be empty
  46. SSH_USER="root"
  47. # +optional
  48. # the port specified to access master node, it can be empty
  49. SSH_PORT=22
  50. # +optional
  51. # must be empty when ACCESS_PRIVATE_KEY_PATH set
  52. # password for master user to access master node
  53. ACCESS_PASSWORD=""
  54. # +optional
  55. # must be empty when ACCESS_PASSWORD set
  56. # ACCESS_PRIVATE_KEY for master user to access master node
  57. ACCESS_PRIVATE_KEY_PATH="/root/.ssh/id_rsa"
  58. #######################################################################
  59. # offline config
  60. # used when offline install choose, must lift offline pkg first
  61. #######################################################################
  62. OFFLINE_INSTALL="false"
  63. OFFLINE_PKG_PATH=""

向集群的 control-plane 添加 master 节点

在新节点上执行部署脚本

  1. KUBECUBE_VERSION=v1.1
  1. export CUSTOMIZE="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

设置脚本参数,并按照提示继续运行安装脚本并等待新节点加入 control-plane

  • MASTER_IP 需要填已有的 master 节点 ip
  • NODE_MODE 当该模式为 node-join-control-plane 时,需要指定 master 节点们的 CONTROL_PLANE_ENDPOINT(vip)
  • CONTROL_PLANE_ENDPOINT 为高可用 vip
  • 可以根据需要选择适合自己的 ssh 方式
  1. # if install kubecube on pivot cluster
  2. INSTALL_KUBECUBE_PIVOT="false"
  3. # if install k8s
  4. INSTALL_KUBERNETES="true"
  5. # there are four node mode below:
  6. # "master" : node will be installed as a master of cluster
  7. # "node-join-master" : node will be install as a worker of cluster to join master
  8. # "control-plane-master" : node will be installed as a master to control plane of cluster
  9. # "node-join-control-plane" : node will be installed as a master to join control plane
  10. NODE_MODE="node-join-master"
  11. # zone has two choice
  12. # 1. "cn" : in mainland
  13. # 2. "others" : out of mainland
  14. ZONE="cn"
  15. # k8s version you want to install
  16. # support now is: 1.20.9, 1.19.13, 1.18.20, 1.21.2
  17. KUBERNETES_VERSION="1.20.9"
  18. # +optional
  19. # must be set when NODE_MODE="control-plane-master"
  20. # or "node-join-control-plane"
  21. CONTROL_PLANE_ENDPOINT="" #{ip}:{port} , dns
  22. #######################################################################
  23. # member cluster config
  24. # used when INSTALL_KUBECUBE_MEMBER="true"
  25. #######################################################################
  26. # if install kubecube on member cluster
  27. INSTALL_KUBECUBE_MEMBER="false"
  28. # +optional
  29. # KUBECUBE_HOST must be set when as a member cluster to
  30. # join pivot cluster, the value is pivot node ip
  31. KUBECUBE_HOST=""
  32. # +optional
  33. # must be set when INSTALL_KUBECUBE_MEMBER="true"
  34. # this value is the name of member cluster you
  35. # want to take over
  36. MEMBER_CLUSTER_NAME=""
  37. #######################################################################
  38. # ssh config
  39. # used when NODE_MODE="node-join-master" or node-join-control-plane
  40. #######################################################################
  41. # +optional
  42. # master ip means master node ip of cluster
  43. MASTER_IP="y.y.y.y"
  44. # +optional
  45. # the user who can access master node, it can be empty
  46. SSH_USER="root"
  47. # +optional
  48. # the port specified to access master node, it can be empty
  49. SSH_PORT=22
  50. # +optional
  51. # must be empty when ACCESS_PRIVATE_KEY_PATH set
  52. # password for master user to access master node
  53. ACCESS_PASSWORD=""
  54. # +optional
  55. # must be empty when ACCESS_PASSWORD set
  56. # ACCESS_PRIVATE_KEY for master user to access master node
  57. ACCESS_PRIVATE_KEY_PATH="/root/.ssh/id_rsa"
  58. #######################################################################
  59. # offline config
  60. # used when offline install choose, must lift offline pkg first
  61. #######################################################################
  62. OFFLINE_INSTALL="false"
  63. OFFLINE_PKG_PATH=""

v1.0.x

向集群添加工作节点

在新节点上执行部署脚本

  1. KUBECUBE_VERSION=v1.0
  1. export CUSTOMIZE="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

tip: 你可以通过预先下载离线包和镜像来减少部署时间 export PRE_DOWNLOAD="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

设置脚本参数,并按照提示继续运行安装脚本并等待新节点加入集群

  • MASTER_IP 为 master 节点 ip
  1. # if install kubecube on pivot cluster
  2. INSTALL_KUBECUBE_PIVOT="false"
  3. # if install kubecube on member cluster
  4. INSTALL_KUBECUBE_MEMBER="false"
  5. # if install k8s
  6. INSTALL_KUBERNETES="true"
  7. # there are four node mode below:
  8. # "master" : node will be installed as a master of cluster
  9. # "node-join-master" : node will be install as a worker of cluster to join master
  10. # "control-plane-master" : node will be installed as a master to control plane of cluster
  11. # "node-join-control-plane" : node will be installed as a master to join control plane
  12. NODE_MODE="node-join-master"
  13. # +optional
  14. # must be set when INSTALL_KUBECUBE_MEMBER="true"
  15. # this value is the name of member cluster you
  16. # want to take over
  17. MEMBER_CLUSTER_NAME=""
  18. # +optional
  19. # must be set when NODE_MODE="control-plane-master"
  20. # or "node-join-control-plane"
  21. CONTROL_PLANE_ENDPOINT="" #{ip}:{port} , dns
  22. # master ip means master node ip of cluster
  23. MASTER_IP="10.173.32.4"
  24. # +optional
  25. # KUBECUBE_HOST must be set when as a member cluster to
  26. # join pivot cluster, the value is pivot node ip
  27. KUBECUBE_HOST=""
  28. # zone has two choice
  29. # 1. "cn" : in mainland
  30. # 2. "others" : out of mainland
  31. ZONE="cn"
  32. # k8s version you want to install
  33. KUBERNETES_VERSION="1.20.9"
  34. # +optional
  35. # the user who can access master node, it can be empty
  36. # when NODE_MODE="master" or "control-plane-master"
  37. SSH_USER="root"
  38. # +optional
  39. # the port specified to access master node, it can be empty
  40. # when NODE_MODE="master" or "control-plane-master"
  41. SSH_PORT=22
  42. # +optional
  43. # must be empty when ACCESS_PRIVATE_KEY_PATH set
  44. # password for master user to access master node
  45. ACCESS_PASSWORD=""
  46. # +optional
  47. # must be empty when ACCESS_PASSWORD set
  48. # ACCESS_PRIVATE_KEY for master user to access master node
  49. ACCESS_PRIVATE_KEY_PATH="/root/.ssh/id_rsa"

向集群的 control-plane 添加 master 节点

在新节点上执行部署脚本

  1. KUBECUBE_VERSION=v1.0
  1. export CUSTOMIZE="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

设置脚本参数,并按照提示继续运行安装脚本并等待新节点加入 control-plane

  • MASTER_IP 需要填已有的 master 节点 ip
  • CONTROL_PLANE_ENDPOINT 为高可用 vip
  1. # if install kubecube on pivot cluster
  2. INSTALL_KUBECUBE_PIVOT="false"
  3. # if install kubecube on member cluster
  4. INSTALL_KUBECUBE_MEMBER="false"
  5. # if install k8s
  6. INSTALL_KUBERNETES="true"
  7. # there are four node mode below:
  8. # "master" : node will be installed as a master of cluster
  9. # "node-join-master" : node will be install as a worker of cluster to join master
  10. # "control-plane-master" : node will be installed as a master to control plane of cluster
  11. # "node-join-control-plane" : node will be installed as a master to join control plane
  12. NODE_MODE="node-join-control-plane"
  13. # +optional
  14. # must be set when INSTALL_KUBECUBE_MEMBER="true"
  15. # this value is the name of member cluster you
  16. # want to take over
  17. MEMBER_CLUSTER_NAME=""
  18. # +optional
  19. # must be set when NODE_MODE="control-plane-master"
  20. # or "node-join-control-plane"
  21. CONTROL_PLANE_ENDPOINT="10.173.32.10" #{ip}:{port} , dns
  22. # master ip means master node ip of cluster
  23. MASTER_IP="10.173.32.4"
  24. # +optional
  25. # KUBECUBE_HOST must be set when as a member cluster to
  26. # join pivot cluster, the value is pivot node ip
  27. KUBECUBE_HOST=""
  28. # zone has two choice
  29. # 1. "cn" : in mainland
  30. # 2. "others" : out of mainland
  31. ZONE="cn"
  32. # k8s version you want to install
  33. KUBERNETES_VERSION="1.20.9"
  34. # +optional
  35. # the user who can access master node, it can be empty
  36. # when NODE_MODE="master" or "control-plane-master"
  37. SSH_USER="root"
  38. # +optional
  39. # the port specified to access master node, it can be empty
  40. # when NODE_MODE="master" or "control-plane-master"
  41. SSH_PORT=22
  42. # +optional
  43. # must be empty when ACCESS_PRIVATE_KEY_PATH set
  44. # password for master user to access master node
  45. ACCESS_PASSWORD=""
  46. # +optional
  47. # must be empty when ACCESS_PASSWORD set
  48. # ACCESS_PRIVATE_KEY for master user to access master node
  49. ACCESS_PRIVATE_KEY_PATH="/root/.ssh/id_rsa"

最后修改 April 11, 2023 : Release v1.8 doc (#57) (cbc6022b)