Laravel Homestead

Introduction

Laravel strives to make the entire PHP development experience delightful, including your local development environment. Vagrant provides a simple, elegant way to manage and provision Virtual Machines.

Laravel Homestead is an official, pre-packaged Vagrant box that provides you a wonderful development environment without requiring you to install PHP, a web server, and any other server software on your local machine. No more worrying about messing up your operating system! Vagrant boxes are completely disposable. If something goes wrong, you can destroy and re-create the box in minutes!

Homestead runs on any Windows, Mac, or Linux system, and includes Nginx, PHP, MySQL, PostgreSQL, Redis, Memcached, Node, and all of the other goodies you need to develop amazing Laravel applications.

{note} If you are using Windows, you may need to enable hardware virtualization (VT-x). It can usually be enabled via your BIOS. If you are using Hyper-V on a UEFI system you may additionally need to disable Hyper-V in order to access VT-x.

Included Software

  • Ubuntu 18.04
  • Git
  • PHP 7.4
  • PHP 7.3
  • PHP 7.2
  • PHP 7.1
  • PHP 7.0
  • PHP 5.6
  • Nginx
  • MySQL
  • lmm for MySQL or MariaDB database snapshots
  • Sqlite3
  • PostgreSQL
  • Composer
  • Node (With Yarn, Bower, Grunt, and Gulp)
  • Redis
  • Memcached
  • Beanstalkd
  • Mailhog
  • avahi
  • ngrok
  • Xdebug
  • XHProf / Tideways / XHGui
  • wp-cli

Optional Software

  • Apache
  • Blackfire
  • Cassandra
  • Chronograf
  • CouchDB
  • Crystal & Lucky Framework
  • Docker
  • Elasticsearch
  • Gearman
  • Go
  • Grafana
  • InfluxDB
  • MariaDB
  • MinIO
  • MongoDB
  • MySQL 8
  • Neo4j
  • Oh My Zsh
  • Open Resty
  • PM2
  • Python
  • RabbitMQ
  • Solr
  • Webdriver & Laravel Dusk Utilities

Installation & Setup

First Steps

Before launching your Homestead environment, you must install VirtualBox 6.x, VMWare, Parallels or Hyper-V as well as Vagrant. All of these software packages provide easy-to-use visual installers for all popular operating systems.

To use the VMware provider, you will need to purchase both VMware Fusion / Workstation and the VMware Vagrant plug-in. Though it is not free, VMware can provide faster shared folder performance out of the box.

To use the Parallels provider, you will need to install Parallels Vagrant plug-in. It is free of charge.

Because of Vagrant limitations, The Hyper-V provider ignores all networking settings.

Installing The Homestead Vagrant Box

Once VirtualBox / VMware and Vagrant have been installed, you should add the laravel/homestead box to your Vagrant installation using the following command in your terminal. It will take a few minutes to download the box, depending on your Internet connection speed:

  1. vagrant box add laravel/homestead

If this command fails, make sure your Vagrant installation is up to date.

{note} Homestead periodically issues "alpha" / "beta" boxes for testing, which may interfere with the vagrant box add command. If you are having issues running vagrant box add, you may run the vagrant up command and the correct box will be downloaded when Vagrant attempts to start the virtual machine.

Installing Homestead

You may install Homestead by cloning the repository onto your host machine. Consider cloning the repository into a Homestead folder within your "home" directory, as the Homestead box will serve as the host to all of your Laravel projects:

  1. git clone https://github.com/laravel/homestead.git ~/Homestead

You should check out a tagged version of Homestead since the master branch may not always be stable. You can find the latest stable version on the GitHub Release Page. Alternatively, you may checkout the release branch which always contains the latest stable release:

  1. cd ~/Homestead
  2. git checkout release

Once you have cloned the Homestead repository, run the bash init.sh command from the Homestead directory to create the Homestead.yaml configuration file. The Homestead.yaml file will be placed in the Homestead directory:

  1. // Mac / Linux...
  2. bash init.sh
  3. // Windows...
  4. init.bat

Configuring Homestead

Setting Your Provider

The provider key in your Homestead.yaml file indicates which Vagrant provider should be used: virtualbox, vmware_fusion, vmware_workstation, parallels or hyperv. You may set this to the provider you prefer:

  1. provider: virtualbox

Configuring Shared Folders

The folders property of the Homestead.yaml file lists all of the folders you wish to share with your Homestead environment. As files within these folders are changed, they will be kept in sync between your local machine and the Homestead environment. You may configure as many shared folders as necessary:

  1. folders:
  2. - map: ~/code/project1
  3. to: /home/vagrant/project1

{note} Windows users should not use the ~/ path syntax and instead should use the full path to their project, such as C:\Users\user\Code\project1.

You should always map individual projects to their own folder mapping instead of mapping your entire ~/code folder. When you map a folder the virtual machine must keep track of all disk IO for every file in the folder. This leads to performance issues if you have a large number of files in a folder.

  1. folders:
  2. - map: ~/code/project1
  3. to: /home/vagrant/project1
  4. - map: ~/code/project2
  5. to: /home/vagrant/project2

{note} You should never mount . (the current directory) when using Homestead. This causes Vagrant to not map the current folder to /vagrant and will break optional features and cause unexpected results while provisioning.

To enable NFS, you only need to add a simple flag to your synced folder configuration:

  1. folders:
  2. - map: ~/code/project1
  3. to: /home/vagrant/project1
  4. type: "nfs"

{note} When using NFS on Windows, you should consider installing the vagrant-winnfsd plug-in. This plug-in will maintain the correct user / group permissions for files and directories within the Homestead box.

You may also pass any options supported by Vagrant's Synced Folders by listing them under the options key:

  1. folders:
  2. - map: ~/code/project1
  3. to: /home/vagrant/project1
  4. type: "rsync"
  5. options:
  6. rsync__args: ["--verbose", "--archive", "--delete", "-zz"]
  7. rsync__exclude: ["node_modules"]

Configuring Nginx Sites

Not familiar with Nginx? No problem. The sites property allows you to easily map a "domain" to a folder on your Homestead environment. A sample site configuration is included in the Homestead.yaml file. Again, you may add as many sites to your Homestead environment as necessary. Homestead can serve as a convenient, virtualized environment for every Laravel project you are working on:

  1. sites:
  2. - map: homestead.test
  3. to: /home/vagrant/project1/public

If you change the sites property after provisioning the Homestead box, you should re-run vagrant reload —provision to update the Nginx configuration on the virtual machine.

{note} Homestead scripts are built to be as idempotent as possible. However, if you are experiencing issues while provisioning you should destroy and rebuild the machine via vagrant destroy && vagrant up.

Hostname Resolution

Homestead publishes hostnames over mDNS for automatic host resolution. If you set hostname: homestead in your Homestead.yaml file, the host will be available at homestead.local. MacOS, iOS, and Linux desktop distributions include mDNS support by default. Windows requires installing Bonjour Print Services for Windows.

Using automatic hostnames works best for "per project" installations of Homestead. If you host multiple sites on a single Homestead instance, you may add the "domains" for your web sites to the hosts file on your machine. The hosts file will redirect requests for your Homestead sites into your Homestead machine. On Mac and Linux, this file is located at /etc/hosts. On Windows, it is located at C:\Windows\System32\drivers\etc\hosts. The lines you add to this file will look like the following:

  1. 192.168.10.10 homestead.test

Make sure the IP address listed is the one set in your Homestead.yaml file. Once you have added the domain to your hosts file and launched the Vagrant box you will be able to access the site via your web browser:

  1. http://homestead.test

Launching The Vagrant Box

Once you have edited the Homestead.yaml to your liking, run the vagrant up command from your Homestead directory. Vagrant will boot the virtual machine and automatically configure your shared folders and Nginx sites.

To destroy the machine, you may use the vagrant destroy —force command.

Per Project Installation

Instead of installing Homestead globally and sharing the same Homestead box across all of your projects, you may instead configure a Homestead instance for each project you manage. Installing Homestead per project may be beneficial if you wish to ship a Vagrantfile with your project, allowing others working on the project to vagrant up.

To install Homestead directly into your project, require it using Composer:

  1. composer require laravel/homestead --dev

Once Homestead has been installed, use the make command to generate the Vagrantfile and Homestead.yaml file in your project root. The make command will automatically configure the sites and folders directives in the Homestead.yaml file.

Mac / Linux:

  1. php vendor/bin/homestead make

Windows:

  1. vendor\\bin\\homestead make

Next, run the vagrant up command in your terminal and access your project at http://homestead.test in your browser. Remember, you will still need to add an /etc/hosts file entry for homestead.test or the domain of your choice if you are not using automatic hostname resolution.

Installing Optional Features

Optional software is installed using the "features" setting in your Homestead configuration file. Most features can be enabled or disabled with a boolean value, while some features allow multiple configuration options:

  1. features:
  2. - blackfire:
  3. server_id: "server_id"
  4. server_token: "server_value"
  5. client_id: "client_id"
  6. client_token: "client_value"
  7. - cassandra: true
  8. - chronograf: true
  9. - couchdb: true
  10. - crystal: true
  11. - docker: true
  12. - elasticsearch:
  13. version: 7
  14. - gearman: true
  15. - golang: true
  16. - grafana: true
  17. - influxdb: true
  18. - mariadb: true
  19. - minio: true
  20. - mongodb: true
  21. - mysql8: true
  22. - neo4j: true
  23. - ohmyzsh: true
  24. - openresty: true
  25. - pm2: true
  26. - python: true
  27. - rabbitmq: true
  28. - solr: true
  29. - webdriver: true

MariaDB

Enabling MariaDB will remove MySQL and install MariaDB. MariaDB serves as a drop-in replacement for MySQL, so you should still use the mysql database driver in your application's database configuration.

MongoDB

The default MongoDB installation will set the database username to homestead and the corresponding password to secret.

Elasticsearch

You may specify a supported version of Elasticsearch, which may be a major version or an exact version number (major.minor.patch). The default installation will create a cluster named 'homestead'. You should never give Elasticsearch more than half of the operating system's memory, so make sure your Homestead machine has at least twice the Elasticsearch allocation.

{tip} Check out the Elasticsearch documentation to learn how to customize your configuration.

Neo4j

The default Neo4j installation will set the database username to homestead and corresponding password to secret. To access the Neo4j browser, visit http://homestead.test:7474 via your web browser. The ports 7687 (Bolt), 7474 (HTTP), and 7473 (HTTPS) are ready to serve requests from the Neo4j client.

Aliases

You may add Bash aliases to your Homestead machine by modifying the aliases file within your Homestead directory:

  1. alias c='clear'
  2. alias ..='cd ..'

After you have updated the aliases file, you should re-provision the Homestead machine using the vagrant reload —provision command. This will ensure that your new aliases are available on the machine.

Daily Usage

Accessing Homestead Globally

Sometimes you may want to vagrant up your Homestead machine from anywhere on your filesystem. You can do this on Mac / Linux systems by adding a Bash function to your Bash profile. On Windows, you may accomplish this by adding a "batch" file to your PATH. These scripts will allow you to run any Vagrant command from anywhere on your system and will automatically point that command to your Homestead installation:

Mac / Linux

  1. function homestead() {
  2. ( cd ~/Homestead && vagrant $* )
  3. }

Make sure to tweak the ~/Homestead path in the function to the location of your actual Homestead installation. Once the function is installed, you may run commands like homestead up or homestead ssh from anywhere on your system.

Windows

Create a homestead.bat batch file anywhere on your machine with the following contents:

  1. @echo off
  2. set cwd=%cd%
  3. set homesteadVagrant=C:\Homestead
  4. cd /d %homesteadVagrant% && vagrant %*
  5. cd /d %cwd%
  6. set cwd=
  7. set homesteadVagrant=

Make sure to tweak the example C:\Homestead path in the script to the actual location of your Homestead installation. After creating the file, add the file location to your PATH. You may then run commands like homestead up or homestead ssh from anywhere on your system.

Connecting Via SSH

You can SSH into your virtual machine by issuing the vagrant ssh terminal command from your Homestead directory.

But, since you will probably need to SSH into your Homestead machine frequently, consider adding the "function" described above to your host machine to quickly SSH into the Homestead box.

Connecting To Databases

A homestead database is configured for both MySQL and PostgreSQL out of the box. To connect to your MySQL or PostgreSQL database from your host machine's database client, you should connect to 127.0.0.1 and port 33060 (MySQL) or 54320 (PostgreSQL). The username and password for both databases is homestead / secret.

{note} You should only use these non-standard ports when connecting to the databases from your host machine. You will use the default 3306 and 5432 ports in your Laravel database configuration file since Laravel is running within the virtual machine.

Database Backups

Homestead can automatically backup your database when your Vagrant box is destroyed. To utilize this feature, you must be using Vagrant 2.1.0 or greater. Or, if you are using an older version of Vagrant, you must install the vagrant-triggers plug-in. To enable automatic database backups, add the following line to your Homestead.yaml file:

  1. backup: true

Once configured, Homestead will export your databases to mysql_backup and postgres_backup directories when the vagrant destroy command is executed. These directories can be found in the folder where you cloned Homestead or in the root of your project if you are using the per project installation method.

Database Snapshots

Homestead supports freezing the state of MySQL and MariaDB databases and branching between them using Logical MySQL Manager. For example, imagine working on a site with a multi-gigabyte database. You can import the database and take a snapshot. After doing some work and creating some test content locally, you may quickly restore back to the original state.

Under the hood, LMM uses LVM's thin snapshot functionality with copy-on-write support. In practice, this means that changing a single row in a table will only cause the changes you made to be written to disk, saving significant time and disk space during restores.

Since lmm interacts with LVM, it must be run as root. To see all available commands, run sudo lmm inside your Vagrant box. A common workflow looks like the following:

  • Import a database into the default master lmm branch.
  • Save a snapshot of the unchanged database using sudo lmm branch prod-YYYY-MM-DD.
  • Modify the database.
  • Run sudo lmm merge prod-YYYY-MM-DD to undo all changes.
  • Run sudo lmm delete <branch> to delete unneeded branches.

Adding Additional Sites

Once your Homestead environment is provisioned and running, you may want to add additional Nginx sites for your Laravel applications. You can run as many Laravel installations as you wish on a single Homestead environment. To add an additional site, add the site to your Homestead.yaml file:

  1. sites:
  2. - map: homestead.test
  3. to: /home/vagrant/project1/public
  4. - map: another.test
  5. to: /home/vagrant/project2/public

If Vagrant is not automatically managing your "hosts" file, you may need to add the new site to that file as well:

  1. 192.168.10.10 homestead.test
  2. 192.168.10.10 another.test

Once the site has been added, run the vagrant reload —provision command from your Homestead directory.

Site Types

Homestead supports several types of sites which allow you to easily run projects that are not based on Laravel. For example, we may easily add a Symfony application to Homestead using the symfony2 site type:

  1. sites:
  2. - map: symfony2.test
  3. to: /home/vagrant/my-symfony-project/web
  4. type: "symfony2"

The available site types are: apache, apigility, expressive, laravel (the default), proxy, silverstripe, statamic, symfony2, symfony4, and zf.

Site Parameters

You may add additional Nginx fastcgi_param values to your site via the params site directive. For example, we'll add a FOO parameter with a value of BAR:

  1. sites:
  2. - map: homestead.test
  3. to: /home/vagrant/project1/public
  4. params:
  5. - key: FOO
  6. value: BAR

Environment Variables

You can set global environment variables by adding them to your Homestead.yaml file:

  1. variables:
  2. - key: APP_ENV
  3. value: local
  4. - key: FOO
  5. value: bar

After updating the Homestead.yaml, be sure to re-provision the machine by running vagrant reload —provision. This will update the PHP-FPM configuration for all of the installed PHP versions and also update the environment for the vagrant user.

Configuring Cron Schedules

Laravel provides a convenient way to schedule Cron jobs by scheduling a single schedule:run Artisan command to be run every minute. The schedule:run command will examine the job schedule defined in your App\Console\Kernel class to determine which jobs should be run.

If you would like the schedule:run command to be run for a Homestead site, you may set the schedule option to true when defining the site:

  1. sites:
  2. - map: homestead.test
  3. to: /home/vagrant/project1/public
  4. schedule: true

The Cron job for the site will be defined in the /etc/cron.d folder of the virtual machine.

Configuring Mailhog

Mailhog allows you to easily catch your outgoing email and examine it without actually sending the mail to its recipients. To get started, update your .env file to use the following mail settings:

  1. MAIL_DRIVER=smtp
  2. MAIL_HOST=localhost
  3. MAIL_PORT=1025
  4. MAIL_USERNAME=null
  5. MAIL_PASSWORD=null
  6. MAIL_ENCRYPTION=null

Once Mailhog has been configured, you may access the Mailhog dashboard at http://localhost:8025.

Configuring Minio

Minio is an open source object storage server with an Amazon S3 compatible API. To install Minio, update your Homestead.yaml file with the following configuration option in the features section:

  1. minio: true

By default, Minio is available on port 9600. You may access the Minio control panel by visiting http://localhost:9600/. The default access key is homestead, while the default secret key is secretkey. When accessing Minio, you should always use region us-east-1.

In order to use Minio you will need to adjust the S3 disk configuration in your config/filesystems.php configuration file. You will need to add the use_path_style_endpoint option to the disk configuration, as well as change the url key to endpoint:

  1. 's3' => [
  2. 'driver' => 's3',
  3. 'key' => env('AWS_ACCESS_KEY_ID'),
  4. 'secret' => env('AWS_SECRET_ACCESS_KEY'),
  5. 'region' => env('AWS_DEFAULT_REGION'),
  6. 'bucket' => env('AWS_BUCKET'),
  7. 'endpoint' => env('AWS_URL'),
  8. 'use_path_style_endpoint' => true
  9. ]

Finally, ensure your .env file has the following options:

  1. AWS_ACCESS_KEY_ID=homestead
  2. AWS_SECRET_ACCESS_KEY=secretkey
  3. AWS_DEFAULT_REGION=us-east-1
  4. AWS_URL=http://localhost:9600

To provision buckets, add a buckets directive to your Homestead configuration file:

  1. buckets:
  2. - name: your-bucket
  3. policy: public
  4. - name: your-private-bucket
  5. policy: none

Supported policy values include: none, download, upload, and public.

Ports

By default, the following ports are forwarded to your Homestead environment:

  • SSH: 2222 → Forwards To 22
  • ngrok UI: 4040 → Forwards To 4040
  • HTTP: 8000 → Forwards To 80
  • HTTPS: 44300 → Forwards To 443
  • MySQL: 33060 → Forwards To 3306
  • PostgreSQL: 54320 → Forwards To 5432
  • MongoDB: 27017 → Forwards To 27017
  • Mailhog: 8025 → Forwards To 8025
  • Minio: 9600 → Forwards To 9600

Forwarding Additional Ports

If you wish, you may forward additional ports to the Vagrant box, as well as specify their protocol:

  1. ports:
  2. - send: 50000
  3. to: 5000
  4. - send: 7777
  5. to: 777
  6. protocol: udp

Sharing Your Environment

Sometimes you may wish to share what you're currently working on with coworkers or a client. Vagrant has a built-in way to support this via vagrant share; however, this will not work if you have multiple sites configured in your Homestead.yaml file.

To solve this problem, Homestead includes its own share command. To get started, SSH into your Homestead machine via vagrant ssh and run share homestead.test. This will share the homestead.test site from your Homestead.yaml configuration file. You may substitute any of your other configured sites for homestead.test:

  1. share homestead.test

After running the command, you will see an Ngrok screen appear which contains the activity log and the publicly accessible URLs for the shared site. If you would like to specify a custom region, subdomain, or other Ngrok runtime option, you may add them to your share command:

  1. share homestead.test -region=eu -subdomain=laravel

{note} Remember, Vagrant is inherently insecure and you are exposing your virtual machine to the Internet when running the share command.

Multiple PHP Versions

Homestead 6 introduced support for multiple versions of PHP on the same virtual machine. You may specify which version of PHP to use for a given site within your Homestead.yaml file. The available PHP versions are: "5.6", "7.0", "7.1", "7.2", "7.3", and "7.4" (the default):

  1. sites:
  2. - map: homestead.test
  3. to: /home/vagrant/project1/public
  4. php: "7.1"

In addition, you may use any of the supported PHP versions via the CLI:

  1. php5.6 artisan list
  2. php7.0 artisan list
  3. php7.1 artisan list
  4. php7.2 artisan list
  5. php7.3 artisan list
  6. php7.4 artisan list

You may also update the default CLI version by issuing the following commands from within your Homestead virtual machine:

  1. php56
  2. php70
  3. php71
  4. php72
  5. php73
  6. php74

Web Servers

Homestead uses the Nginx web server by default. However, it can install Apache if apache is specified as a site type. While both web servers can be installed at the same time, they cannot both be running at the same time. The flip shell command is available to ease the process of switching between web servers. The flip command automatically determines which web server is running, shuts it off, and then starts the other server. To use this command, SSH into your Homestead machine and run the command in your terminal:

  1. flip

Mail

Homestead includes the Postfix mail transfer agent, which is listening on port 1025 by default. So, you may instruct your application to use the smtp mail driver on localhost port 1025. Then, all sent mail will be handled by Postfix and caught by Mailhog. To view your sent emails, open http://localhost:8025 in your web browser.

Debugging & Profiling

Debugging Web Requests With Xdebug

Homestead includes support for step debugging using Xdebug. For example, you can load a web page from a browser, and PHP will connect to your IDE to allow inspection and modification of the running code.

By default Xdebug is already running and ready to accept connections. If you need to enable Xdebug on the CLI run the sudo phpenmod xdebug command within your Vagrant box. Next, follow your IDE's instructions to enable debugging. Finally, configure your browser to trigger Xdebug with an extension or bookmarklet.

{note} Xdebug causes PHP to run significantly slower. To disable Xdebug, run sudo phpdismod xdebug within your Vagrant box and restart the FPM service.

Debugging CLI Applications

To debug a PHP CLI application, use the xphp shell alias inside your Vagrant box:

  1. xphp path/to/script

Autostarting Xdebug

When debugging functional tests that make requests to the web server, it is easier to autostart debugging rather than modifying tests to pass through a custom header or cookie to trigger debugging. To force Xdebug to start automatically, modify /etc/php/7.x/fpm/conf.d/20-xdebug.ini inside your Vagrant box and add the following configuration:

  1. ; If Homestead.yaml contains a different subnet for the IP address, this address may be different...
  2. xdebug.remote_host = 192.168.10.1
  3. xdebug.remote_autostart = 1

Profiling Applications with Blackfire

Blackfire is a SaaS service for profiling web requests and CLI applications and writing performance assertions. It offers an interactive user interface which displays profile data in call-graphs and timelines. It is built for use in development, staging, and production, with no overhead for end users. It provides performance, quality, and security checks on code and php.ini configuration settings.

The Blackfire Player is an open-source Web Crawling, Web Testing and Web Scraping application which can work jointly with Blackfire in order to script profiling scenarios.

To enable Blackfire, use the "features" setting in your Homestead configuration file:

  1. features:
  2. - blackfire:
  3. server_id: "server_id"
  4. server_token: "server_value"
  5. client_id: "client_id"
  6. client_token: "client_value"

Blackfire server credentials and client credentials require a user account. Blackfire offers various options to profile an application, including a CLI tool and browser extension. Please review the Blackfire documentation for more details.

Profiling PHP Performance Using XHGui

XHGui is a user interface for exploring the performance of your PHP applications. To enable XHGui, add xhgui: 'true' to your site configuration:

  1. sites:
  2. -
  3. map: your-site.test
  4. to: /home/vagrant/your-site/public
  5. type: "apache"
  6. xhgui: 'true'

If the site already exists, make sure to run vagrant provision after updating your configuration.

To profile a web request, add xhgui=on as a query parameter to a request. XHGui will automatically attach a cookie to the response so that subsequent requests do not need the query string value. You may view your application profile results by browsing to http://your-site.test/xhgui.

To profile a CLI request using XHGui, prefix the command with XHGUI=on:

  1. XHGUI=on path/to/script

CLI profile results may be viewed in the same way as web profile results.

Note that the act of profiling slows down script execution, and absolute times may be as much as twice as real-world requests. Therefore, always compare percentage improvements and not absolute numbers. Also, be aware the execution time includes any time spent paused in a debugger.

Since performance profiles take up significant disk space, they are deleted automatically after a few days.

Network Interfaces

The networks property of the Homestead.yaml configures network interfaces for your Homestead environment. You may configure as many interfaces as necessary:

  1. networks:
  2. - type: "private_network"
  3. ip: "192.168.10.20"

To enable a bridged interface, configure a bridge setting and change the network type to public_network:

  1. networks:
  2. - type: "public_network"
  3. ip: "192.168.10.20"
  4. bridge: "en1: Wi-Fi (AirPort)"

To enable DHCP, just remove the ip option from your configuration:

  1. networks:
  2. - type: "public_network"
  3. bridge: "en1: Wi-Fi (AirPort)"

Extending Homestead

You may extend Homestead using the after.sh script in the root of your Homestead directory. Within this file, you may add any shell commands that are necessary to properly configure and customize your virtual machine.

When customizing Homestead, Ubuntu may ask you if you would like to keep a package's original configuration or overwrite it with a new configuration file. To avoid this, you should use the following command when installing packages to avoid overwriting any configuration previously written by Homestead:

  1. sudo apt-get -y \
  2. -o Dpkg::Options::="--force-confdef" \
  3. -o Dpkg::Options::="--force-confold" \
  4. install your-package

User Customizations

When using Homestead in a team setting, you may want to tweak Homestead to better fit your personal development style. You may create a user-customizations.sh file in the root of your Homestead directory (The same directory containing your Homestead.yaml). Within this file, you may make any customization you would like; however, the user-customizations.sh should not be version controlled.

Updating Homestead

Before you begin updating Homestead ensure you have removed your current virtual machine by running the following command in your Homestead directory:

  1. vagrant destroy

Next, you need to update the Homestead source code. If you cloned the repository you can run the following commands at the location you originally cloned the repository:

  1. git fetch
  2. git pull origin release

These commands pull the latest Homestead code from the GitHub repository, fetches the latest tags, and then checks out the latest tagged release. You can find the latest stable release version on the GitHub releases page.

If you have installed Homestead via your project's composer.json file, you should ensure your composer.json file contains "laravel/homestead": "^10" and update your dependencies:

  1. composer update

Then, you should update the Vagrant box using the vagrant box update command:

  1. vagrant box update

Finally, you will need to regenerate your Homestead box to utilize the latest Vagrant installation:

  1. vagrant up

Provider Specific Settings

VirtualBox

natdnshostresolver

By default, Homestead configures the natdnshostresolver setting to on. This allows Homestead to use your host operating system's DNS settings. If you would like to override this behavior, add the following lines to your Homestead.yaml file:

  1. provider: virtualbox
  2. natdnshostresolver: 'off'

Symbolic Links On Windows

If symbolic links are not working properly on your Windows machine, you may need to add the following block to your Vagrantfile:

  1. config.vm.provider "virtualbox" do |v|
  2. v.customize ["setextradata", :id, "VBoxInternal2/SharedFoldersEnableSymlinksCreate/v-root", "1"]
  3. end