Upgrading Longhorn Manager from v0.7.0+

Prerequisite: Always back up volumes before upgrading. If anything goes wrong, you can restore the volume using the backup.

To upgrade with kubectl, run this command:

  1. kubectl apply -f https://raw.githubusercontent.com/longhorn/longhorn/master/deploy/longhorn.yaml

To upgrade with Helm, run this command:

  1. helm upgrade longhorn ./longhorn/chart

On Kubernetes clusters managed by Rancher 2.1 or newer, the steps to upgrade Longhorn manager are the same as the installation steps.

Next, upgrade Longhorn engine.

Upgrading from v0.6.2 or older version to v0.8.1

Migrate PVs and PVCs for the Volumes Launched in v0.6.2 or Older

If a volume is launched and used in Longhorn v0.6.2 or older, the related persistent volumes (PVs) and persistent volume claims (PVCs) are still managed by the old CSI plugin, which will be deprecated in a later Longhorn version.

Therefore, the PVCs and PVs should be migrated to use the new CSI plugin for the volume in Longhorn v0.8.1.

Prerequisites
  • Longhorn is already upgraded to v0.8.1.
  • The related PVs and PVCs were created in v0.6.2 or older.
  • Each volume is detached and the workloads are down.
Migration Steps
  1. If you don’t know when the volumes were created, find out which volumes need to be migrated by running the following command:

    1. kubectl get pv --output=jsonpath="{.items[?(@.spec.csi.driver==\"io.rancher.longhorn\")].spec.csi.volumeHandle}"
  2. Remove finalizer external-attacher/io-rancher-longhorn for the related PV.

    1. kubectl edit pv <The corresponding PV of the volume found in step 1>
  3. Shut down the related workloads and detach the volumes.

  4. Run this script for each volume:

    1. curl -s https://raw.githubusercontent.com/longhorn/longhorn/v0.8.1/scripts/migrate-for-pre-070-volumes.sh |bash -s -- <volume name>

    Or run the script for all volumes:

    1. curl -s https://raw.githubusercontent.com/longhorn/longhorn/v0.8.1/scripts/migrate-for-pre-070-volumes.sh |bash -s -- --all

Result: The volumes have been migrated to use the new CSI driver.

Migration Failure handling
The failure handling prerequisite

If the migration prerequisites are not satisfied and there is no error log failed to delete then recreate PV/PVC, users need to manually check the current PVC/PV then recreate them if needed: <error log>, the script will do nothing for the PV and PVC. Users can check the migration prerequisites and steps and retry it.

If the migration fails and the error log mentioned above is printed out, users need to manually handle the migration for the failed volume.

The failure handling/manual migration steps
  1. Update spec.persistentVolumeReclaimPolicy to Retain and remove the all finalizers in metadata.finalizers for the PV with this command:

    1. kubectl edit pv <The PV name>
  2. Delete the PVC and PV with this command:

    1. kubectl delete pvc <The PVC name> && kubectl delete pv <The PV name>
  3. Use the Longhorn UI to recreate the PV and PVC. Make sure the options Create PVC and Use Previous PVC are checked.

Error: failed to delete then recreate PV/PVC, users need to manually check the current PVC/PV then recreate them if needed: failed to wait for the old PV deletion complete

Upgrading Longhorn Manager from v0.6.2 to v0.7.0

You will need to follow this guide to upgrade the Longhorn manager from v0.6.2 to v0.7.0.

Live upgrades are not supported from v0.6.2 to v0.7.0.

Prerequisites

  • Make sure Kubernetes version is v1.14.0+.
  • Make backups for all the volumes.
  • Stop the workloads from using the volumes.

Upgrade Longhorn Manager

The Longhorn manager can be upgraded with kubectl or with the Rancher catalog app.

Using the Rancher Catalog App

  1. Run the following command to avoid this ‘updates to provisioner are forbidden’ error:

    1. kubectl delete -f https://raw.githubusercontent.com/longhorn/longhorn/v0.7.0/examples/storageclass.yaml
  2. Click the Upgrade button in the Rancher UI

  3. Wait for the app to complete the upgrade.

Next, upgrade Longhorn engine.

Using kubectl

Use kubectl apply -f https://raw.githubusercontent.com/longhorn/longhorn/v0.7.0/deploy/longhorn.yaml

And wait for all the pods to become running and Longhorn UI working.

  1. $ kubectl -n longhorn-system get pod
  2. NAME READY STATUS RESTARTS AGE
  3. compatible-csi-attacher-69857469fd-rj5vm 1/1 Running 4 3d12h
  4. csi-attacher-79b9bfc665-56sdb 1/1 Running 0 3d12h
  5. csi-attacher-79b9bfc665-hdj7t 1/1 Running 0 3d12h
  6. csi-attacher-79b9bfc665-tfggq 1/1 Running 3 3d12h
  7. csi-provisioner-68b7d975bb-5ggp8 1/1 Running 0 3d12h
  8. csi-provisioner-68b7d975bb-frggd 1/1 Running 2 3d12h
  9. csi-provisioner-68b7d975bb-zrr65 1/1 Running 0 3d12h
  10. engine-image-ei-605a0f3e-8gx4s 1/1 Running 0 3d14h
  11. engine-image-ei-605a0f3e-97gxx 1/1 Running 0 3d14h
  12. engine-image-ei-605a0f3e-r6wm4 1/1 Running 0 3d14h
  13. instance-manager-e-a90b0bab 1/1 Running 0 3d14h
  14. instance-manager-e-d1458894 1/1 Running 0 3d14h
  15. instance-manager-e-f2caa5e5 1/1 Running 0 3d14h
  16. instance-manager-r-04417b70 1/1 Running 0 3d14h
  17. instance-manager-r-36d9928a 1/1 Running 0 3d14h
  18. instance-manager-r-f25172b1 1/1 Running 0 3d14h
  19. longhorn-csi-plugin-72bsp 4/4 Running 0 3d12h
  20. longhorn-csi-plugin-hlbg8 4/4 Running 0 3d12h
  21. longhorn-csi-plugin-zrvhl 4/4 Running 0 3d12h
  22. longhorn-driver-deployer-66b6d8b97c-snjrn 1/1 Running 0 3d12h
  23. longhorn-manager-pf5p5 1/1 Running 0 3d14h
  24. longhorn-manager-r5npp 1/1 Running 1 3d14h
  25. longhorn-manager-t59kt 1/1 Running 0 3d14h
  26. longhorn-ui-b466b6d74-w7wzf 1/1 Running 0 50m

Next, upgrade Longhorn engine.

TroubleShooting

Error: “longhorn” is invalid: provisioner: Forbidden: updates to provisioner are forbidden.

  • This means you need to clean up the old longhorn storageClass for Longhorn v0.7.0 upgrade, since we’ve changed the provisioner from rancher.io/longhorn to driver.longhorn.io.

  • Noticed the PVs created by the old storageClass will still use rancher.io/longhorn as provisioner. Longhorn v0.7.0 supports attach/detach/deleting of the PVs created by the previous version of Longhorn, but it doesn’t support creating new PVs using the old provisioner name. Please use the new StorageClass for the new volumes.

If you are using YAML file:

  1. Clean up the deprecated StorageClass:

    1. kubectl delete -f https://raw.githubusercontent.com/longhorn/longhorn/v0.7.0/examples/storageclass.yaml
  2. Run

    1. kubectl apply https://raw.githubusercontent.com/longhorn/longhorn/v0.7.0/deploy/longhorn.yaml

If you are using Rancher App:

  1. Clean up the default StorageClass:

    1. kubectl delete -f https://raw.githubusercontent.com/longhorn/longhorn/v0.7.0/examples/storageclass.yaml
  2. Follow these troubleshooting instructions.

Error: kind CustomResourceDefinition with the name “xxx” already exists in the cluster and wasn’t defined in the previous release…

This is a Helm bug.

Please make sure that you have not deleted the old Longhorn CRDs via the command curl -s https://raw.githubusercontent.com/longhorn/longhorn-manager/master/hack/cleancrds.sh | bash -s v062 or executed Longhorn uninstaller before executing the following command. Otherwise you MAY LOSE all the data stored in the Longhorn system.

Clean up:

  1. kubectl -n longhorn-system delete ds longhorn-manager
  2. curl -s https://raw.githubusercontent.com/longhorn/longhorn-manager/master/hack/cleancrds.sh | bash -s v070
  1. Re-click the Upgrade button in the Rancher UI.

Clean up the v0.6.2 CRDs

These steps should not be executed if you want to maintain the ability to roll back from a v0.7.0 installation.

  1. Bring back the workload online.
  2. Make sure all the volumes are back online.
  3. Check all the existing manager pods are running v0.7.0. No v0.6.2 pods should be running. Run this command:

    1. kubectl -n longhorn-system get pod -o yaml|grep "longhorn-manager:v0.6.2"

    No results should appear.

  4. Run the following script to clean up the v0.6.2 CRDs.

    Important: You must make sure all the v0.6.2 pods have been deleted, otherwise the data will be lost.

    1. curl -s https://raw.githubusercontent.com/longhorn/longhorn-manager/master/hack/cleancrds.sh | bash -s v062

Rollbacks

Since we upgrade the CSI framework from v0.4.2 to v1.1.0 in this release, rolling back from Longhorn v0.7.0 to v0.6.2 or lower means downgrading the CSI plugin. But Kubernetes does not support the downgrading the CSI plugin. Therefore, restarting kubelet is unavoidable. Please be careful, and follow the instructions exactly.

Prerequisite: To rollback from v0.7.0 installation, you must not have cleaned up the v0.6.2 CRDs.

Steps to roll back:

  1. Clean up the components introduced by Longhorn v0.7.0 upgrade

    1. kubectl delete -f https://raw.githubusercontent.com/longhorn/longhorn/v0.7.0/examples/storageclass.yaml
    2. curl -s https://raw.githubusercontent.com/longhorn/longhorn-manager/master/hack/cleancrds.sh | bash -s v070
  2. Restart the Kubelet container on all nodes or restart all the nodes. This step WILL DISRUPT all the workloads in the system.

  3. Connect to the node then run:

    1. docker restart kubelet
  4. Rollback: Use kubectl apply or the Rancher catalog app to roll back Longhorn.