Longhorn can be installed on a Kubernetes cluster in several ways:

To install Longhorn in an air gapped environment, refer to this section.

For information on customizing Longhorn’s default settings, refer to this section.

For information on deploying Longhorn on specific nodes and rejecting general workloads for those nodes, refer to the section on taints and tolerations.

Installation Requirements

Each node in the Kubernetes cluster where Longhorn is installed must fulfill the following requirements:

  • A container runtime compatible with Kubernetes (Docker v1.13+, containerd v1.3.7+, etc.)
  • Kubernetes v1.16+.
    • Recommend Kubernetes v1.17+
  • open-iscsi is installed, and the iscsid daemon is running on all the nodes. This is necessary, since Longhorn relies on iscsiadm on the host to provide persistent volumes to Kubernetes. For help installing open-iscsi, refer to this section.
  • RWX support requires that each node has a NFSv4 client installed.
  • The host filesystem supports the file extents feature to store the data. Currently we support:
    • ext4
    • XFS
  • bash, curl, findmnt, grep, awk, blkid, lsblk must be installed.
  • Mount propagation must be enabled.

The Longhorn workloads must be able to run as root in order for Longhorn to be deployed and operated properly.

This script can be used to check the Longhorn environment for potential issues.

For the minimum recommended hardware, refer to the best practices guide.

OS/Distro Specific Configuration

  • Google Kubernetes Engine (GKE) requires some additional setup for Longhorn to function properly. If you’re a GKE user, refer to this section for details.
  • K3s clusters require some extra setup. Refer to this section
  • RKE clusters with CoreOS need this configuration.

Using the Environment Check Script

We’ve written a script to help you gather enough information about the factors.

Note jq maybe required to be installed locally prior to running env check script.

To run script:

  1. curl -sSfL https://raw.githubusercontent.com/longhorn/longhorn/v1.1.0/scripts/environment_check.sh | bash

Example result:

  1. daemonset.apps/longhorn-environment-check created
  2. waiting for pods to become ready (0/3)
  3. all pods ready (3/3)
  4. MountPropagation is enabled!
  5. cleaning up...
  6. daemonset.apps "longhorn-environment-check" deleted
  7. clean up complete

Pod Security Policy

Starting with v1.0.2, Longhorn is shipped with a default Pod Security Policy that will give Longhorn the necessary privileges to be able to run properly.

No special configuration is needed for Longhorn to work properly on clusters with Pod Security Policy enabled.

Notes on Mount Propagation

If your Kubernetes cluster was provisioned by Rancher v2.0.7+ or later, the MountPropagation feature is enabled by default.

If MountPropagation is disabled, Base Image feature will be disabled.

Installing open-iscsi

The command used to install open-iscsi differs depending on the Linux distribution.

For GKE, we recommend using Ubuntu as the guest OS image since it containsopen-iscsi already.

You may need to edit the cluster security group to allow SSH access.

For SUSE and openSUSE, use this command:

  1. zypper install open-iscsi

For Debian and Ubuntu, use this command:

  1. apt-get install open-iscsi

For RHEL, CentOS, and EKS with EKS Kubernetes Worker AMI with AmazonLinux2 image, use this command:

  1. yum install iscsi-initiator-utils

We also provide an iscsi installer to make it easier for users to install open-iscsi automatically:

  1. kubectl apply -f https://raw.githubusercontent.com/longhorn/longhorn/v1.1.0/deploy/iscsi/longhorn-iscsi-installation.yaml

After the deployment, run the following command to check pods’ status of the installer:

  1. kubectl get pod | grep longhorn-iscsi-installation
  2. longhorn-iscsi-installation-49hd7 1/1 Running 0 21m
  3. longhorn-iscsi-installation-pzb7r 1/1 Running 0 39m

And also can check the log with the following command to see the installation result:

  1. kubectl logs longhorn-iscsi-installation-pzb7r -c iscsi-installation
  2. ...
  3. Installed:
  4. iscsi-initiator-utils.x86_64 0:6.2.0.874-7.amzn2
  5. Dependency Installed:
  6. iscsi-initiator-utils-iscsiuio.x86_64 0:6.2.0.874-7.amzn2
  7. Complete!
  8. Created symlink from /etc/systemd/system/multi-user.target.wants/iscsid.service to /usr/lib/systemd/system/iscsid.service.
  9. iscsi install successfully

Installing NFSv4 client

The command used to install a NFSv4 client differs depending on the Linux distribution.

For Debian and Ubuntu, use this command:

  1. apt-get install nfs-common

For RHEL, CentOS, and EKS with EKS Kubernetes Worker AMI with AmazonLinux2 image, use this command:

  1. yum install nfs-utils

Checking the Kubernetes Version

Use the following command to check your Kubernetes server version

  1. kubectl version

Result:

  1. Client Version: version.Info{Major:"1", Minor:"19", GitVersion:"v1.19.3", GitCommit:"1e11e4a2108024935ecfcb2912226cedeafd99df", GitTreeState:"clean", BuildDate:"2020-10-14T12:50:19Z", GoVersion:"go1.15.2", Compiler:"gc", Platform:"linux/amd64"}
  2. Server Version: version.Info{Major:"1", Minor:"17", GitVersion:"v1.17.4", GitCommit:"8d8aa39598534325ad77120c120a22b3a990b5ea", GitTreeState:"clean", BuildDate:"2020-03-12T20:55:23Z", GoVersion:"go1.13.8", Compiler:"gc", Platform:"linux/amd64"}

The Server Version should be v1.16 or above.