The osquery shell and daemon use optional command line (CLI) flags to controlinitialization, disable/enable features, and select plugins. These flags are powered by Google Flags and are somewhat complicated. Understanding how flags work in osquery will help with stability and greatly reduce issue debugging time.

Most flags apply to both tools, osqueryi and osqueryd. The shell contains a few more to help with printing and other helpful one-off modes of operation. Expect Linux / macOS / and Windows to include platform specific flags too. Most platform specific flags will control the OS API and library integrations used by osquery. Warning, this list is still not the 'complete set' of flags. Refer to the techniques below for obtaining ground truth and check other components of this Wiki.

Flags that do not control startup settings may be included as "options" within configuration. Essentially, any flag needed to help osquery determine and discover a configuration must be supplied via command line arguments. Google Flags enhances this to allow flags to be set within environment variables or via a "master" flag file.

To see a full list of flags for your osquery version use —help or select from the osquery_flags table:

  1. $ osqueryi
  2. osquery> SELECT * FROM osquery_flags;

To see the flags that have been updated by your configuration, a flag file, or by the shell try:

  1. osquery> SELECT * FROM osquery_flags WHERE default_value <> value;

Flagfile

A special flag, part of Google Flags, can be used to read additional flags from a line-delimited file. On macOS and Linux this —flagfile is the recommended way to add/remove the following CLI-only initialization flags.

—flagfile /etc/osquery/osquery.flags

Include line-delimited switches to be interpreted and used as CLI-flags:

  1. --config_plugin=custom_plugin
  2. --logger_plugin=custom_plugin
  3. --distributed_plugin=custom_plugin
  4. --watchdog_level=0

If no —flagfile is provided, osquery will try to find and use a "default" flagfile at /etc/osquery/osquery.flags.default. Both the shell and daemon will discover and use the defaults.

NOTICE: Flags in a flagfile should not be wrapped in quotes, shell-macro/variable expansion is not applied!

Configuration control flags

—config_plugin=filesystem

Config plugin name. The type of configuration retrieval, the default filesystem plugin reads a configuration JSON from disk.

Built-in options include: filesystem, tls

—config_path=/etc/osquery/osquery.conf

The filesystem config plugin's path to a JSON file.On macOS the default path is /var/osquery/osquery.conf.If you want to read from multiple configuration paths create a directory: /etc/osquery/osquery.conf.d/. All files within that optional directory will be read and merged in lexical order.

—config_refresh=0

An optional configuration refresh interval in seconds. By default a configuration is fetched only at osquery load. If the configuration should be auto-updated set a "refresh" time to a value in seconds greater than 0. If the configuration endpoint cannot be reached during runtime, the normal retry approach is applied (e.g., the tls config plugin will retry 3 times).

—config_accelerated_refresh=300

If a configuration refresh is used (config_refresh > 0) and the refresh attempt fails, the accelerated refresh will be used. This allows plugins like tls to fetch fresh data after having been offline for a while.

—config_check=false

Check the format of an osquery config and exit. Arbitrary config plugins may be used. osquery will return a non-0 exit if the parsing failed.

—config_dump=false

Request that the configuration JSON be printed to standard out before it is updated. In this case "updated" means applied to the active config. When osquery starts it performs an initial update from the config plugin. To quickly debug the content retrieved by custom config plugins use this in tandem with —config_check.

Daemon control flags

—force=false

Force osqueryd to kill previously-running daemons. The daemon will check for an existing "pidfile". If found, and if it contains a pid of a process named "osqueryd", the process will be killed.

—pidfile=/var/osquery/osqueryd.pidfile

Path to the daemon pidfile mutex. The file is used to prevent multiple osqueryd processes starting.

—disable_watchdog=false

Disable userland watchdog process. osqueryd uses a watchdog process to monitor the memory and CPU utilization of threads executing the query schedule. If any performance limit is violated the "worker" process will be restarted.

—watchdog_level=0

Performance limit level (0=normal, 1=restrictive, -1=disabled). The watchdog process uses a "level" to configure performance limits.

The level limits are as follows:Memory: default 200M, restrictive 100MCPU: default 25% (for 9 seconds), restrictive 18% (for 9 seconds)

The normal level allows for 10 restarts if the limits are violated. The restrictive allows for only 4, then the service will be disabled. For both there is a linear backoff of 5 seconds, doubling each retry.

It is better to set the level to disabled -1 compared to disabling the watchdog outright as the worker/watcher concept is used for extensions autoloading too. The watchdog "profiles" can be overridden for Memory and CPU Utilization.

—watchdog_memory_limit=0

If this value is >0 then the watchdog level (—watchdog_level) for maximum memory is overridden. Use this if you would like to allow the osqueryd process to allocate more than 200M, but somewhere less than 1G. This memory limit is expressed as a value representing MB.

—watchdog_utilization_limit=0

If this value is >0 then the watchdog level (—watchdog_level) for maximum sustained CPU utilization is overridden. Use this if you would like to allow the osqueryd process to use more than 30% of a thread for more than 9 seconds of wall time. The length of sustained utilization is not independently configurable.

This value is a maximum number of CPU cycles counted as the processes table's user_time and system_time. The default is 90, meaning less 90 seconds of cpu time per 3 seconds of wall time is allowed.

—watchdog_delay=60

A delay in seconds before the watchdog process starts enforcing memory and CPU utilization limits. The default value 60s allows the daemon to perform resource intense actions, such as forwarding logs, at startup.

—enable_extensions_watchdog=false

By default the watchdog monitors extensions for improper shutdown, but NOT for performance and utilization issues. Enable this flag if you would like extensions to use the same CPU and memory limits as the osquery worker. This means that your extensions or third-party extensions may be asked to stop and restart during execution.

—utc=true

Attempt to convert all UNIX calendar times to UTC.

—table_delay=0

Add a microsecond delay between multiple table calls (when a table is used in a JOIN). A 200 microsecond delay will trade about 20% additional time for a reduced 5% CPU utilization.

—hash_cache_max=500

The hash table implements a cache that is invalidated when file path inodes are changed. Eviction occurs in chunks if the max-size is reached. This max should remain relatively low since it will persist in the daemon's resident memory.

—hash_delay=20

Add a millisecond delay between multiple hash attempts (aka when scanning a directory). This adds about 50% additional wall-time for 150 files. This reduces the instantaneous resource need from hashing new files.

—disable_hash_cache=false

Set this to true if you would like to disable file hash caching and always regenerate the file hashes every request. The default osquery configuration may report hashes incorrectly if things are editing filesystems outside of the OS's control.

Windows Only

Windows builds include a —install and —uninstall that will create a Windows service using the osqueryd.exe binary and preserve an optional —flagfile if provided.

Backing storage control flags

—database_path=/var/osquery/osquery.db

If using a disk-based backing store, specify a path. osquery will keep state using a "backing store" using RocksDB by default. This state holds event information such that it may be queried later according to a schedule. It holds the results of the most recent query for each query within the schedule. This last-queried result allows query-differential logging.

—database_dump=false

Helpful for debugging database problems. This will print a line for each key in the backing store. Note: There could be MBs worth of data in the backing store.

Extensions control flags

—disable_extensions=false

Disable extension API. See the SDK development page for more information on osquery extensions, and the deployment page for how to use extensions.

—extensions_socket=/var/osquery/osquery.em

Path to the extensions UNIX domain socket.Extensions use a UNIX domain socket for communication. It is very uncommon to change the location of the file. The osquery shell may use extensions, but the socket location is relative to the user invoking the shell and does not support concurrent shells.

—extensions_autoload=/etc/osquery/extensions.load

Optional path to a list of autoloaded and managed extensions.If using an extension to provide a proprietary config or logger plugin the extension process can be started by the daemon. Include line-delimited paths to extension executables. See the extensions deployment page for more details on extension autoloading.

—extensions_timeout=3

Seconds to wait for autoloaded extensions to register.osqueryd may depend on a config plugin from an extension. If the requested config plugin name is not registered within the timeout the daemon will exit with a failure.

—extensions_interval=3

Seconds delay between extension connectivity checks.Extensions are loaded as processes. They are expected to start a thrift service thread. The osqueryd process will continue to check this API. If an extension process is incorrectly stopped, osqueryd will detect the connectivity failure and unregister the extension.

—extensions_require=custom1,custom1

Optional comma-delimited set of extension names to require before osqueryi or osqueryd will start. The tool will fail if the extension has not started according to the interval and timeout.

Remote settings flags (optional)

When using non-default remote plugins such as the tls config, logger and distributed plugins, there are process-wide settings applied to every plugin.

—tls_hostname=

When using tls-based config or logger plugins, a single TLS host URI is used. Using separate hosts for configuration and logging is not supported among the tls-based plugin suite. Provide a host name and optional port, e.g.: facebook.com or facebook.com:443.

—tls_session_reuse=true

Reuse TLS session sockets.

—tls_session_timeout=3600

Once a socket is created the life time is governed by this flag. If this value is set as zero then transport never times out unless the remote end closes the connection or an error occurs.

—tls_client_cert=

See the tls/remote plugin documentation. Optionally provide a path to a PEM-formatted client TLS certificate.

—tls_client_key=

See the tls/remote plugin documentation. Optionally provide a path to a decrypted/password-less PEM-formatted client TLS private key.

—tls_server_certs=

See the tls/remote plugin documentation. Optionally provide a path to a PEM-formatted server or authority certificate bundle. This path will be used as either an explicit set of accepted certificates or an OpenSSL-verify path directory of well-formed filename certificates.

—disable_enrollment=false

See the tls/remote plugin documentation. Remote plugins use an enrollment process to enable possible server-side implemented authentication and identification/authorization. Config and logger plugins implicitly require enrollment features. It is not recommended to disable enrollment and this option may be removed in the future.

—enroll_secret_path=

See the tls/remote plugin documentation. A very simple authentication/enrollment involves posting a deployment or staged shared secret. This secret should be protected on the host, but potentially shared among an enterprise or fleet. Provide a path for the osquery process to read and use during enrollment phases.

—config_tls_endpoint=

The tls endpoint path, e.g.: /api/v1/config when using the tls config plugin. See the other tls_ related CLI flags.

—config_tls_max_attempts=3

The total number of attempts that will be made to the remote config server if a request fails.

—logger_tls_endpoint=

The tls endpoint path, e.g.: /api/v1/logger when using the tls logger plugin. See the other tls_ related CLI flags.

—enrollment_tls_endpoint=

See the tls/remote plugin documentation. An enrollment process will be used to allow server-side implemented authentication and identification/authorization. You must provide an endpoint relative to the —tls_hostname URI.

—logger_tls_period=3

See the tls/remote plugin documentation. This is a number of seconds before checking for buffered logs. Results are sent to the TLS endpoint in intervals, not on demand (unless the period=0).

—logger_tls_compress=false

Optionally enable GZIP compression for request bodies when sending. This is optional, and disabled by default, as the deployment must explicitly know that the logging endpoint supports GZIP for content encoding.

—logger_tls_max=1048576

It is common for TLS/HTTPS servers to enforce a maximum request body size. The default behavior in osquery is to enforce each log line be under 1M bytes. This means each result line from a query's results cannot exceed 1M, this is very unlikely. Each log attempt will try to forward up to 1024 lines. If your service is limited request bodies, configure the client to limit the log line size.

Use this only in emergency situations as size violations are dropped. It is extremely uncommon for this to occur, as the —value_max for each column would need to be drastically larger, or the offending table would have to implement several hundred columns.

—distributed_tls_read_endpoint=

The URI path which will be used, in conjunction with —tls_hostname, to create the remote URI for retrieving distributed queries when using the tls distributed plugin.

—distributed_tls_write_endpoint=

The URI path which will be used, in conjunction with —tls_hostname, to create the remote URI for submitting the results of distributed queries when using the tls distributed plugin.

—distributed_tls_max_attempts=3

The total number of attempts that will be made to the remote distributed query server if a request fails when using the tls distributed plugin.

Daemon runtime control flags

—schedule_splay_percent=10

Percent to splay config times.The query schedule often includes several queries with the same interval.It is often not the intention of the schedule author to run these queries together at that interval. But rather, each query should run at about the interval. A default schedule splay of 10% is applied to each query when the configuration is loaded.

—pack_refresh_interval=3600

Query Packs may optionally include one or more discovery queries, which allowyou to use osquery queries to manage which packs should be loaded at runtime.Osquery will natively re-run the discovery queries from time to time, to makesure that all of the correct packs are executing. This flag allows you tospecify that interval.

—packdelimiter=

Control the delimiter between pack name and pack query names. When queries are added to the daemon's schedule they inherit the name of the pack. A query named info within the general_info pack will become pack_general_info_info. Changing the delimiter to "/" turned the scheduled name into: pack/general_info/info.

—disable_caching=false

"Caching" refers to short cutting the table implementation and returning the same results from the previous query against the table. This is not related to differential results from scheduled queries, but does affect the performance of the schedule. Results are cached when different scheduled queries in a schedule use the same table, without providing query constraints. Caching should NOT affect data freshness since the cache life is determined as the minimum interval of all queries against a table.

—schedule_default_interval=3600

Optionally set the default interval value. This is used if you schedule a querywhich does not define an interval.

—schedule_timeout=0

Limit the schedule, 0 for no limit. Optionally limit the osqueryd's life by adding a schedule limit in seconds. This should only be used for testing.

—disable_tables=table_name1,table_name2

Comma-delimited list of table names to be disabled. This allows osquery to be launched without certain tables.

—read_max=52428800 (50MB)

Maximum file read size. The daemon or shell will first 'stat' each file before reading. If the reported size is greater than read_max a "file too large" error will be returned.

Events control flags

—disable_events=false

Disable osquery Operating System eventing publish subscribe APIs. This will implicitly disable several tables that report based on logged events.

—events_expiry=3600

Timeout to expire eventing publish subscribe results from the backing-store. This expiration is only applied when results are queried. For example, if —events_expiry=1 then events will only practically exist for a single select from the subscriber. If no select occurs then events will be saved in the backing store indefinitely.

—events_optimize=true

Since event rows are only "added" it does not make sense to emit "removed" results. An optimization can occur within the osquery daemon's query schedule. Every time the select query runs on a subscriber the current time is saved. Subsequent selects will use the previously saved time as the lower bound. This optimization is removed if any constraints on the "time" column are included.

—events_max=50000

Maximum number of events to buffer in the backing store while waiting for a query to 'drain' or trigger an expiration. If the expiration (events_expiry) is set to 1 hour, this max value indicates that only 50000 events will be stored before dropping each hour. In this case the limiting time is almost always the scheduled query. If a scheduled query that select from events-based tables occurs sooner than the expiration time that interval becomes the limit.

Windows Only

—windows_event_channels=System,Application,Setup,Security

List of Windows event log channels to subscribe to. By default the Windows event log publisher will subscribe to some of the more common major event log channels. However you can subscribe to additional channels using the Log Name field value in the Windows event viewer. Note the lack of quotes around the channel names. For example, to subscribe to Windows Powershell script block logging one would first enable the feature and then subscribe to the channel with —windows_event_channels=Microsoft-Windows-PowerShell/Operational

Linux Only

—hardware_disabled_types=partition

This is a comma-separated list of UDEV types to drop. On machines with flash-backed storage it is likely you'll encounter lots of noise from disk and partition types.

Logging/results flags

—logger_plugin=filesystem

Logger plugin name. The default logger is filesystem. This writes the various log types as JSON to specific file paths.

Multiple logger plugins may be used simultaneously, effectively copying logs to each interface. Separate plugin names with a comma when specifying the configuration (—logger_plugin=filesystem,syslog).

Built-in options include: filesystem, tls, syslog, and several Amazon/AWS options.

—disable_logging=false

Disable ERROR/WARNING/INFO (called status logs) and query result logging.

—logger_event_type=true

Log scheduled results as events.

—logger_snapshot_event_type=false

Log scheduled snapshot results as events, similar to differential results. If this is set to true then each row from a snapshot query will be logged individually.

—logger_min_status=0

The minimum level for status log recording. Use the following values: INFO = 0, WARNING = 1, ERROR = 2. To disable all status messages use 3+. When using —verbose this value is ignored.

—logger_min_stderr=0

The minimum level for status logs written to stderr. Use the following values: INFO = 0, WARNING = 1, ERROR = 2. To disable all status messages use 3+. It does NOT limit or control the types sent to the logger plugin. When using —verbose this value is ignored.

—logger_stderr=true

The default behavior is to also write status logs to stderr. Set this flag to false to disable writing (copying) status logs to stderr. In this case —verbose is respected.

—host_identifier=hostname

Field used to identify the host running osquery: hostname, uuid, ephemeral, instance, specified.

DHCP may assign variable hostnames, if this is the case, you may need a consistent logging label. Four options are available to you:

  • uuid uses the platform (DMTF) host UUID, fetched at process start.
  • instance uses an instance-unique UUID generated at process start, persisted in the backing store.
  • ephemeral uses an instance-unique UUID generated at process start, not persisted.
  • specified uses an ID provided by the —specified_identifier flag.—specified_identifier=this.is.the.identifier

If —host_identifier=specified is set, use this value as the host identifier.

—verbose=false

Enable verbose informational messages.

—logger_path=/var/log/osquery/

Directory path for ERROR/WARN/INFO and results logging.

—logger_mode=420

File mode for output log files (provided as a decimal string). Note that thisaffects both the query result log and the status logs. Warning: If run as root, log files may contain sensitive information!

—value_max=512

Maximum returned row value size.

—logger_syslog_facility

Set the syslog facility (number) 0-23 for the results log. When using the syslog logger plugin the default facility is 19 at the LOG_INFO level, which does not log to /var/log/system.

—logger_syslog_prepend_cee

Prepend a @cee: cookie to JSON-formatted messages sent to the syslog logger plugin. Several syslog parsers use this cookie to indicate that the message payload is parseable JSON. The default value is false.

—logger_kafka_brokers

A comma delimited list of Kafka brokers to connect to. Format can be protocol://host:port, host:port or just host with the port number falling back to the default value of 9092. protocol can be plaintext (default) or ssl. When protocol is ssl, —tls_server_certs value is used as certificate trust store. Optionally —tls_client_cert and —tls_client_key can be provided for TLS client authentication with Kafka brokers.

—logger_kafka_topic

The Kafka topic to publish logs to. When using multiple topics this configuration becomes the base topic that unconfigured queries fall back to. Please see the Kafka section of the logging wiki for more details.

—logger_kafka_acks

The number of acknowledgments the Kafka leader has to receive before a publish is considered successful. Valid options are (0, 1, "all").

—logger_kafka_compression

Compression codec to use for compressing message sets. Valid options are ("none", "gzip"). Default is "none".

Distributed query service flags

—distributed_plugin=tls

Distributed plugin name. The default distributed plugin is not set. You must set —disable_distributed=false —distributed_plugin=tls (or whatever plugin you'd rather use instead of TLS) to enable the distributed feature.

—disable_distributed=true

Disable distributed queries functionality. By default, this is set to true (the distributed feature is disabled). Set this to false to enable distributed queries.

—distributed_interval=60

In seconds, the amount of time that osqueryd will wait between periodically checking in with a distributed query server to see if there are any queries to execute.

Syslog consumption

There is a syslog virtual table that uses Events and a rsyslog configuration to capture results from syslog. Please see the Syslog Consumption deployment page for more information.

—enable_syslog=false

Turn on the syslog ingestion event publisher. This is an 'explicit'-enable because it requires external configuration of rsyslog.

—syslog_pipe_path=/var/osquery/syslog_pipe

Path to the named pipe used for forwarding rsyslog events.

—syslog_rate_limit=100

Maximum number of logs to ingest per run (~200ms between runs). Use this as a fail-safe to prevent osquery from becoming overloaded when syslog is spammed.

Augeas flags

—augeas_lenses=/usr/share/osquery/lenses

Augeas lenses are bundled with osquery distributions. On Linux they are installed in /usr/share/osquery/lenses. On macOS lenses are installed in /private/var/osquery/lenses directory. Specify the path to the directory containing custom or different version lenses files.

Docker flags

—docker_socket=/var/run/docker.sock

Docker information for containers, networks, volumes, images etc is available in different tables. osquery uses docker's UNIX domain socket to invoke docker API calls. Provide the path to docker's domain socket file. User running osqueryd / osqueryi should have permission to read the socket file.

Shell-only flags

Most of the shell flags are self-explanatory and are adapted from the SQLite shell. Refer to the shell's ".help" command for details and explanations.

There are several flags that control the shell's output format: —json, —list, —line, —csv. For all of the output types there is —nullvalue and —separator that can be used appropriately.

—planner=false

When prototyping new queries the planner enables verbose decisions made by the SQLite virtual table API. This is customized by osquery code so it is very helpful to learn what predicate constraints are selected and what full table scans are required for JOINs and nested queries.

—header=true

Set this value to false to disable column name (header) output. If using the shell in an automation or script the header line in line or csv mode may not be needed.

Numeric monitoring flags

—enable_numeric_monitoring=false

Enable numeric monitoring system. By default it is disabled.

—numeric_monitoring_plugins=filesystem

Comma separated numeric monitoring plugins. By default there is only one - filesystem.

—numeric_monitoring_pre_aggregation_time=60

Time period in seconds for numeric monitoring pre-aggreagation buffer. During this period of time monitoring points are going to be pre-aggregated and accumulated in buffer. At the end of this period aggregated points will be flushed to —numeric_monitoring_plugins. 0 means work without buffer at all. For the most of monitoring data some aggregation will be applied on the user side. It means for such monitoring particular points means not much. And to reduce a disk usage and a network traffic some pre-aggregation is applied on osquery side.

—numeric_monitoring_filesystem_path=OSQUERY_LOG_HOME/numeric_monitoring.log

File to dump numeric monitoring records one per line. The format of the line is <PATH><TAB><VALUE><TAB><TIMESTAMP>. File will be opened in append mode.