CIS 1.5 Benchmark - Self-Assessment Guide - Rancher v2.5

概述

本文档是对 Rancher v2.5 安全加固指南的补充。加固指南提供了用于加固 Rancher 的生产环境集群的指南,该基准自测指南旨在帮助您针对安全基准中的每个控制,来评估加固集群的安全级别。本指南将逐步介绍各种控制,并提供更新的示例命令以审核 Rancher 创建的集群中的合规性。此文档的适用人群是:Rancher 运维人员、安全团队、审核员和决策者。

单击此处下载本文件的 PDF 版本

加固指南旨在与特定版本的安全加固指南,CIS Kubernetes Benchmark,Kubernetes 和 Rancher 一起使用:

自测指南版本Rancher 版本安全加固指南版本Kubernetes 版本CIS Benchmark 版本
自测指南 v2.5Rancher v2.5安全加固指南 v2.5Kubernetes v1.15Benchmark v1.5

由于 Rancher 和 RKE 以容器的方式安装 Kubernetes,因此 CIS Kubernetes Benchmark 中的许多控制验证检查均不适用,完成 CIS 扫描后,这些检测对应的结论是Not Applicable(不适用)。

有关每个审核的更多详细信息,包括测试失败的原因和补救措施,您可以参考 CIS Kubernetes Benchmark v1.5 的相应部分。登录CISecurity.org后,可以下载基准测试。

测试控制方法

Rancher 和 RKE 通过 Docker 容器安装 Kubernetes 服务。配置在初始化时通过给容器传递参数的方式设置,而不是通过配置文件定义。

如果控制审核与原始 CIS 基准不同,则将提供 Rancher Labs 特定的审核命令以进行测试。执行测试时,您将需要访问所有三个 RKE 角色的主机上的 Docker 命令行。这些命令还利用了jqkubectl(使用有效的 kubeconfig 文件)来测试和评估测试结果。

说明:本文只包含了得分的测试。

Controls


1 Master Node Security Configuration

1.1 Master Node Configuration Files

1.1.1 Ensure that the API server pod specification file permissions are set to 644 or more restrictive (Scored)

Result: Not Applicable

Remediation: RKE doesn’t require or maintain a configuration file for the API server. All configuration is passed in as arguments at container run time.

1.1.2 Ensure that the API server pod specification file ownership is set to root:root (Scored)

Result: Not Applicable

Remediation: RKE doesn’t require or maintain a configuration file for the API server. All configuration is passed in as arguments at container run time.

1.1.3 Ensure that the controller manager pod specification file permissions are set to 644 or more restrictive (Scored)

Result: Not Applicable

Remediation: RKE doesn’t require or maintain a configuration file for the controller manager. All configuration is passed in as arguments at container run time.

1.1.4 Ensure that the controller manager pod specification file ownership is set to root:root (Scored)

Result: Not Applicable

Remediation: RKE doesn’t require or maintain a configuration file for the controller manager. All configuration is passed in as arguments at container run time.

1.1.5 Ensure that the scheduler pod specification file permissions are set to 644 or more restrictive (Scored)

Result: Not Applicable

Remediation: RKE doesn’t require or maintain a configuration file for the scheduler. All configuration is passed in as arguments at container run time.

1.1.6 Ensure that the scheduler pod specification file ownership is set to root:root (Scored)

Result: Not Applicable

Remediation: RKE doesn’t require or maintain a configuration file for the scheduler. All configuration is passed in as arguments at container run time.

1.1.7 Ensure that the etcd pod specification file permissions are set to 644 or more restrictive (Scored)

Result: Not Applicable

Remediation: RKE doesn’t require or maintain a configuration file for etcd. All configuration is passed in as arguments at container run time.

1.1.8 Ensure that the etcd pod specification file ownership is set to root:root (Scored)

Result: Not Applicable

Remediation: RKE doesn’t require or maintain a configuration file for etcd. All configuration is passed in as arguments at container run time.

1.1.11 Ensure that the etcd data directory permissions are set to 700 or more restrictive (Scored)

Result: PASS

Remediation: On the etcd server node, get the etcd data directory, passed as an argument --data-dir, from the below command:

  1. ps -ef | grep etcd

Copy

Run the below command (based on the etcd data directory found above). For example,

  1. chmod 700 /var/lib/etcd

Copy

Audit Script: 1.1.11.sh

  1. #!/bin/bash -e
  2. etcd_bin=${1}
  3. test_dir=$(ps -ef | grep ${etcd_bin} | grep -- --data-dir | sed 's%.*data-dir[= ]\([^ ]*\).*%\1%')
  4. docker inspect etcd | jq -r '.[].HostConfig.Binds[]' | grep "${test_dir}" | cut -d ":" -f 1 | xargs stat -c %a

Copy

Audit Execution:

  1. ./1.1.11.sh etcd

Copy

Expected result:

  1. '700' is equal to '700'

Copy

1.1.12 Ensure that the etcd data directory ownership is set to etcd:etcd (Scored)

Result: PASS

Remediation: On the etcd server node, get the etcd data directory, passed as an argument --data-dir, from the below command:

  1. ps -ef | grep etcd

Copy

Run the below command (based on the etcd data directory found above). For example,

  1. chown etcd:etcd /var/lib/etcd

Copy

Audit Script: 1.1.12.sh

  1. #!/bin/bash -e
  2. etcd_bin=${1}
  3. test_dir=$(ps -ef | grep ${etcd_bin} | grep -- --data-dir | sed 's%.*data-dir[= ]\([^ ]*\).*%\1%')
  4. docker inspect etcd | jq -r '.[].HostConfig.Binds[]' | grep "${test_dir}" | cut -d ":" -f 1 | xargs stat -c %U:%G

Copy

Audit Execution:

  1. ./1.1.12.sh etcd

Copy

Expected result:

  1. 'etcd:etcd' is present

Copy

1.1.13 Ensure that the admin.conf file permissions are set to 644 or more restrictive (Scored)

Result: Not Applicable

Remediation: RKE does not store the kubernetes default kubeconfig credentials file on the nodes. It’s presented to user where RKE is run. We recommend that this kube_config_cluster.yml file be kept in secure store.

1.1.14 Ensure that the admin.conf file ownership is set to root:root (Scored)

Result: Not Applicable

Remediation: RKE does not store the kubernetes default kubeconfig credentials file on the nodes. It’s presented to user where RKE is run. We recommend that this kube_config_cluster.yml file be kept in secure store.

1.1.15 Ensure that the scheduler.conf file permissions are set to 644 or more restrictive (Scored)

Result: Not Applicable

Remediation: RKE doesn’t require or maintain a configuration file for the scheduler. All configuration is passed in as arguments at container run time.

1.1.16 Ensure that the scheduler.conf file ownership is set to root:root (Scored)

Result: Not Applicable

Remediation: RKE doesn’t require or maintain a configuration file for the scheduler. All configuration is passed in as arguments at container run time.

1.1.17 Ensure that the controller-manager.conf file permissions are set to 644 or more restrictive (Scored)

Result: Not Applicable

Remediation: RKE doesn’t require or maintain a configuration file for the controller manager. All configuration is passed in as arguments at container run time.

1.1.18 Ensure that the controller-manager.conf file ownership is set to root:root (Scored)

Result: Not Applicable

Remediation: RKE doesn’t require or maintain a configuration file for the controller manager. All configuration is passed in as arguments at container run time.

1.1.19 Ensure that the Kubernetes PKI directory and file ownership is set to root:root (Scored)

Result: PASS

Remediation: Run the below command (based on the file location on your system) on the master node. For example,

  1. chown -R root:root /etc/kubernetes/ssl

Copy

Audit:

  1. stat -c %U:%G /etc/kubernetes/ssl

Copy

Expected result:

  1. 'root:root' is present

Copy

1.1.20 Ensure that the Kubernetes PKI certificate file permissions are set to 644 or more restrictive (Scored)

Result: PASS

Remediation: Run the below command (based on the file location on your system) on the master node. For example,

  1. chmod -R 644 /etc/kubernetes/ssl

Copy

Audit Script: check_files_permissions.sh

  1. #!/usr/bin/env bash
  2. # This script is used to ensure the file permissions are set to 644 or
  3. # more restrictive for all files in a given directory or a wildcard
  4. # selection of files
  5. #
  6. # inputs:
  7. # $1 = /full/path/to/directory or /path/to/fileswithpattern
  8. # ex: !(*key).pem
  9. #
  10. # $2 (optional) = permission (ex: 600)
  11. #
  12. # outputs:
  13. # true/false
  14. # Turn on "extended glob" for use of '!' in wildcard
  15. shopt -s extglob
  16. # Turn off history to avoid surprises when using '!'
  17. set -H
  18. USER_INPUT=$1
  19. if [[ "${USER_INPUT}" == "" ]]; then
  20. echo "false"
  21. exit
  22. fi
  23. if [[ -d ${USER_INPUT} ]]; then
  24. PATTERN="${USER_INPUT}/*"
  25. else
  26. PATTERN="${USER_INPUT}"
  27. fi
  28. PERMISSION=""
  29. if [[ "$2" != "" ]]; then
  30. PERMISSION=$2
  31. fi
  32. FILES_PERMISSIONS=$(stat -c %n\ %a ${PATTERN})
  33. while read -r fileInfo; do
  34. p=$(echo ${fileInfo} | cut -d' ' -f2)
  35. if [[ "${PERMISSION}" != "" ]]; then
  36. if [[ "$p" != "${PERMISSION}" ]]; then
  37. echo "false"
  38. exit
  39. fi
  40. else
  41. if [[ "$p" != "644" && "$p" != "640" && "$p" != "600" ]]; then
  42. echo "false"
  43. exit
  44. fi
  45. fi
  46. done <<< "${FILES_PERMISSIONS}"
  47. echo "true"
  48. exit

Copy

Audit Execution:

  1. ./check_files_permissions.sh '/etc/kubernetes/ssl/*.pem'

Copy

Expected result:

  1. 'true' is present

Copy

1.1.21 Ensure that the Kubernetes PKI key file permissions are set to 600 (Scored)

Result: PASS

Remediation: Run the below command (based on the file location on your system) on the master node. For example,

  1. chmod -R 600 /etc/kubernetes/ssl/certs/serverca

Copy

Audit Script: 1.1.21.sh

  1. #!/bin/bash -e
  2. check_dir=${1:-/etc/kubernetes/ssl}
  3. for file in $(find ${check_dir} -name "*key.pem"); do
  4. file_permission=$(stat -c %a ${file})
  5. if [[ "${file_permission}" == "600" ]]; then
  6. continue
  7. else
  8. echo "FAIL: ${file} ${file_permission}"
  9. exit 1
  10. fi
  11. done
  12. echo "pass"

Copy

Audit Execution:

  1. ./1.1.21.sh /etc/kubernetes/ssl

Copy

Expected result:

  1. 'pass' is present

Copy

1.2 API Server

1.2.2 Ensure that the --basic-auth-file argument is not set (Scored)

Result: PASS

Remediation: Follow the documentation and configure alternate mechanisms for authentication. Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and remove the --basic-auth-file=<filename> parameter.

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. '--basic-auth-file' is not present

Copy

1.2.3 Ensure that the --token-auth-file parameter is not set (Scored)

Result: PASS

Remediation: Follow the documentation and configure alternate mechanisms for authentication. Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and remove the --token-auth-file=<filename> parameter.

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. '--token-auth-file' is not present

Copy

1.2.4 Ensure that the --kubelet-https argument is set to true (Scored)

Result: PASS

Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and remove the --kubelet-https parameter.

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. '--kubelet-https' is present OR '--kubelet-https' is not present

Copy

1.2.5 Ensure that the --kubelet-client-certificate and --kubelet-client-key arguments are set as appropriate (Scored)

Result: PASS

Remediation: Follow the Kubernetes documentation and set up the TLS connection between the apiserver and kubelets. Then, edit API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the kubelet client certificate and key parameters as below.

  1. --kubelet-client-certificate=<path/to/client-certificate-file>
  2. --kubelet-client-key=<path/to/client-key-file>

Copy

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. '--kubelet-client-certificate' is present AND '--kubelet-client-key' is present

Copy

1.2.6 Ensure that the --kubelet-certificate-authority argument is set as appropriate (Scored)

Result: PASS

Remediation: Follow the Kubernetes documentation and setup the TLS connection between the apiserver and kubelets. Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the --kubelet-certificate-authority parameter to the path to the cert file for the certificate authority. --kubelet-certificate-authority=<ca-string>

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. '--kubelet-certificate-authority' is present

Copy

1.2.7 Ensure that the --authorization-mode argument is not set to AlwaysAllow (Scored)

Result: PASS

Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the --authorization-mode parameter to values other than AlwaysAllow. One such example could be as below.

  1. --authorization-mode=RBAC

Copy

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. 'Node,RBAC' not have 'AlwaysAllow'

Copy

1.2.8 Ensure that the --authorization-mode argument includes Node (Scored)

Result: PASS

Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the --authorization-mode parameter to a value that includes Node.

  1. --authorization-mode=Node,RBAC

Copy

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. 'Node,RBAC' has 'Node'

Copy

1.2.9 Ensure that the --authorization-mode argument includes RBAC (Scored)

Result: PASS

Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the --authorization-mode parameter to a value that includes RBAC, for example:

  1. --authorization-mode=Node,RBAC

Copy

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. 'Node,RBAC' has 'RBAC'

Copy

1.2.11 Ensure that the admission control plugin AlwaysAdmit is not set (Scored)

Result: PASS

Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and either remove the --enable-admission-plugins parameter, or set it to a value that does not include AlwaysAdmit.

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. 'NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,MutatingAdmissionWebhook,ValidatingAdmissionWebhook,ResourceQuota,NodeRestriction,Priority,TaintNodesByCondition,PersistentVolumeClaimResize,PodSecurityPolicy,EventRateLimit' not have 'AlwaysAdmit' OR '--enable-admission-plugins' is not present

Copy

1.2.14 Ensure that the admission control plugin ServiceAccount is set (Scored)

Result: PASS

Remediation: Follow the documentation and create ServiceAccount objects as per your environment. Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and ensure that the --disable-admission-plugins parameter is set to a value that does not include ServiceAccount.

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. 'NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,MutatingAdmissionWebhook,ValidatingAdmissionWebhook,ResourceQuota,NodeRestriction,Priority,TaintNodesByCondition,PersistentVolumeClaimResize,PodSecurityPolicy,EventRateLimit' has 'ServiceAccount' OR '--enable-admission-plugins' is not present

Copy

1.2.15 Ensure that the admission control plugin NamespaceLifecycle is set (Scored)

Result: PASS

Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the --disable-admission-plugins parameter to ensure it does not include NamespaceLifecycle.

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. '--disable-admission-plugins' is present OR '--disable-admission-plugins' is not present

Copy

1.2.16 Ensure that the admission control plugin PodSecurityPolicy is set (Scored)

Result: PASS

Remediation: Follow the documentation and create Pod Security Policy objects as per your environment. Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the --enable-admission-plugins parameter to a value that includes PodSecurityPolicy:

  1. --enable-admission-plugins=...,PodSecurityPolicy,...

Copy

Then restart the API Server.

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. 'NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,MutatingAdmissionWebhook,ValidatingAdmissionWebhook,ResourceQuota,NodeRestriction,Priority,TaintNodesByCondition,PersistentVolumeClaimResize,PodSecurityPolicy,EventRateLimit' has 'PodSecurityPolicy'

Copy

1.2.17 Ensure that the admission control plugin NodeRestriction is set (Scored)

Result: PASS

Remediation: Follow the Kubernetes documentation and configure NodeRestriction plug-in on kubelets. Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the --enable-admission-plugins parameter to a value that includes NodeRestriction.

  1. --enable-admission-plugins=...,NodeRestriction,...

Copy

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. 'NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,MutatingAdmissionWebhook,ValidatingAdmissionWebhook,ResourceQuota,NodeRestriction,Priority,TaintNodesByCondition,PersistentVolumeClaimResize,PodSecurityPolicy,EventRateLimit' has 'NodeRestriction'

Copy

1.2.18 Ensure that the --insecure-bind-address argument is not set (Scored)

Result: PASS

Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and remove the --insecure-bind-address parameter.

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. '--insecure-bind-address' is not present

Copy

1.2.19 Ensure that the --insecure-port argument is set to 0 (Scored)

Result: PASS

Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the below parameter.

  1. --insecure-port=0

Copy

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. '0' is equal to '0'

Copy

1.2.20 Ensure that the --secure-port argument is not set to 0 (Scored)

Result: PASS

Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and either remove the --secure-port parameter or set it to a different (non-zero) desired port.

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. 6443 is greater than 0 OR '--secure-port' is not present

Copy

1.2.21 Ensure that the --profiling argument is set to false (Scored)

Result: PASS

Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the below parameter.

  1. --profiling=false

Copy

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. 'false' is equal to 'false'

Copy

1.2.22 Ensure that the --audit-log-path argument is set (Scored)

Result: PASS

Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the --audit-log-path parameter to a suitable path and file where you would like audit logs to be written, for example:

  1. --audit-log-path=/var/log/apiserver/audit.log

Copy

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. '--audit-log-path' is present

Copy

1.2.23 Ensure that the --audit-log-maxage argument is set to 30 or as appropriate (Scored)

Result: PASS

Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the --audit-log-maxage parameter to 30 or as an appropriate number of days:

  1. --audit-log-maxage=30

Copy

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. 30 is greater or equal to 30

Copy

1.2.24 Ensure that the --audit-log-maxbackup argument is set to 10 or as appropriate (Scored)

Result: PASS

Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the --audit-log-maxbackup parameter to 10 or to an appropriate value.

  1. --audit-log-maxbackup=10

Copy

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. 10 is greater or equal to 10

Copy

1.2.25 Ensure that the --audit-log-maxsize argument is set to 100 or as appropriate (Scored)

Result: PASS

Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the --audit-log-maxsize parameter to an appropriate size in MB. For example, to set it as 100 MB:

  1. --audit-log-maxsize=100

Copy

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. 100 is greater or equal to 100

Copy

1.2.26 Ensure that the --request-timeout argument is set as appropriate (Scored)

Result: PASS

Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml and set the below parameter as appropriate and if needed. For example,

  1. --request-timeout=300s

Copy

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. '--request-timeout' is not present OR '--request-timeout' is present

Copy

1.2.27 Ensure that the --service-account-lookup argument is set to true (Scored)

Result: PASS

Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the below parameter.

  1. --service-account-lookup=true

Copy

Alternatively, you can delete the --service-account-lookup parameter from this file so that the default takes effect.

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. '--service-account-lookup' is not present OR 'true' is equal to 'true'

Copy

1.2.28 Ensure that the --service-account-key-file argument is set as appropriate (Scored)

Result: PASS

Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the --service-account-key-file parameter to the public key file for service accounts:

  1. `--service-account-key-file=<filename>`

Copy

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. '--service-account-key-file' is present

Copy

1.2.29 Ensure that the --etcd-certfile and --etcd-keyfile arguments are set as appropriate (Scored)

Result: PASS

Remediation: Follow the Kubernetes documentation and set up the TLS connection between the apiserver and etcd. Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the etcd certificate and key file parameters.

  1. --etcd-certfile=<path/to/client-certificate-file>
  2. --etcd-keyfile=<path/to/client-key-file>

Copy

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. '--etcd-certfile' is present AND '--etcd-keyfile' is present

Copy

1.2.30 Ensure that the --tls-cert-file and --tls-private-key-file arguments are set as appropriate (Scored)

Result: PASS

Remediation: Follow the Kubernetes documentation and set up the TLS connection on the apiserver. Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the TLS certificate and private key file parameters.

  1. --tls-cert-file=<path/to/tls-certificate-file>
  2. --tls-private-key-file=<path/to/tls-key-file>

Copy

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. '--tls-cert-file' is present AND '--tls-private-key-file' is present

Copy

1.2.31 Ensure that the --client-ca-file argument is set as appropriate (Scored)

Result: PASS

Remediation: Follow the Kubernetes documentation and set up the TLS connection on the apiserver. Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the client certificate authority file.

  1. --client-ca-file=<path/to/client-ca-file>

Copy

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. '--client-ca-file' is present

Copy

1.2.32 Ensure that the --etcd-cafile argument is set as appropriate (Scored)

Result: PASS

Remediation: Follow the Kubernetes documentation and set up the TLS connection between the apiserver and etcd. Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the etcd certificate authority file parameter.

  1. --etcd-cafile=<path/to/ca-file>

Copy

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. '--etcd-cafile' is present

Copy

1.2.33 Ensure that the --encryption-provider-config argument is set as appropriate (Scored)

Result: PASS

Remediation: Follow the Kubernetes documentation and configure a EncryptionConfig file. Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the --encryption-provider-config parameter to the path of that file:

  1. --encryption-provider-config=</path/to/EncryptionConfig/File>

Copy

Audit:

  1. /bin/ps -ef | grep kube-apiserver | grep -v grep

Copy

Expected result:

  1. '--encryption-provider-config' is present

Copy

1.2.34 Ensure that encryption providers are appropriately configured (Scored)

Result: PASS

Remediation: Follow the Kubernetes documentation and configure a EncryptionConfig file. In this file, choose aescbc, kms or secretbox as the encryption provider.

Audit Script: 1.2.34.sh

  1. #!/bin/bash -e
  2. check_file=${1}
  3. grep -q -E 'aescbc|kms|secretbox' ${check_file}
  4. if [ $? -eq 0 ]; then
  5. echo "--pass"
  6. exit 0
  7. else
  8. echo "fail: encryption provider found in ${check_file}"
  9. exit 1
  10. fi

Copy

Audit Execution:

  1. ./1.2.34.sh /etc/kubernetes/ssl/encryption.yaml

Copy

Expected result:

  1. '--pass' is present

Copy

1.3 Controller Manager

1.3.1 Ensure that the --terminated-pod-gc-threshold argument is set as appropriate (Scored)

Result: PASS

Remediation: Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml on the master node and set the --terminated-pod-gc-threshold to an appropriate threshold, for example:

  1. --terminated-pod-gc-threshold=10

Copy

Audit:

  1. /bin/ps -ef | grep kube-controller-manager | grep -v grep

Copy

Expected result:

  1. '--terminated-pod-gc-threshold' is present

Copy

1.3.2 Ensure that the --profiling argument is set to false (Scored)

Result: PASS

Remediation: Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml on the master node and set the below parameter.

  1. --profiling=false

Copy

Audit:

  1. /bin/ps -ef | grep kube-controller-manager | grep -v grep

Copy

Expected result:

  1. 'false' is equal to 'false'

Copy

1.3.3 Ensure that the --use-service-account-credentials argument is set to true (Scored)

Result: PASS

Remediation: Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml on the master node to set the below parameter.

  1. --use-service-account-credentials=true

Copy

Audit:

  1. /bin/ps -ef | grep kube-controller-manager | grep -v grep

Copy

Expected result:

  1. 'true' is not equal to 'false'

Copy

1.3.4 Ensure that the --service-account-private-key-file argument is set as appropriate (Scored)

Result: PASS

Remediation: Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml on the master node and set the --service-account-private-key-file parameter to the private key file for service accounts.

  1. `--service-account-private-key-file=<filename>`

Copy

Audit:

  1. /bin/ps -ef | grep kube-controller-manager | grep -v grep

Copy

Expected result:

  1. '--service-account-private-key-file' is present

Copy

1.3.5 Ensure that the --root-ca-file argument is set as appropriate (Scored)

Result: PASS

Remediation: Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml on the master node and set the --root-ca-file parameter to the certificate bundle file`.

  1. --root-ca-file=<path/to/file>

Copy

Audit:

  1. /bin/ps -ef | grep kube-controller-manager | grep -v grep

Copy

Expected result:

  1. '--root-ca-file' is present

Copy

1.3.6 Ensure that the RotateKubeletServerCertificate argument is set to true (Scored)

Result: PASS

Remediation: Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml on the master node and set the --feature-gates parameter to include RotateKubeletServerCertificate=true.

  1. --feature-gates=RotateKubeletServerCertificate=true

Copy

Audit:

  1. /bin/ps -ef | grep kube-controller-manager | grep -v grep

Copy

Expected result:

  1. 'RotateKubeletServerCertificate=true' is equal to 'RotateKubeletServerCertificate=true'

Copy

1.3.7 Ensure that the --bind-address argument is set to 127.0.0.1 (Scored)

Result: PASS

Remediation: Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml on the master node and ensure the correct value for the --bind-address parameter.

Audit:

  1. /bin/ps -ef | grep kube-controller-manager | grep -v grep

Copy

Expected result:

  1. '--bind-address' is present OR '--bind-address' is not present

Copy

1.4 Scheduler

1.4.1 Ensure that the --profiling argument is set to false (Scored)

Result: PASS

Remediation: Edit the Scheduler pod specification file /etc/kubernetes/manifests/kube-scheduler.yaml file on the master node and set the below parameter.

  1. --profiling=false

Copy

Audit:

  1. /bin/ps -ef | grep kube-scheduler | grep -v grep

Copy

Expected result:

  1. 'false' is equal to 'false'

Copy

1.4.2 Ensure that the --bind-address argument is set to 127.0.0.1 (Scored)

Result: PASS

Remediation: Edit the Scheduler pod specification file /etc/kubernetes/manifests/kube-scheduler.yaml on the master node and ensure the correct value for the --bind-address parameter.

Audit:

  1. /bin/ps -ef | grep kube-scheduler | grep -v grep

Copy

Expected result:

  1. '--bind-address' is present OR '--bind-address' is not present

Copy

2 Etcd Node Configuration

2 Etcd Node Configuration Files

2.1 Ensure that the --cert-file and --key-file arguments are set as appropriate (Scored)

Result: PASS

Remediation: Follow the etcd service documentation and configure TLS encryption. Then, edit the etcd pod specification file /etc/kubernetes/manifests/etcd.yaml on the master node and set the below parameters.

  1. --cert-file=</path/to/ca-file>
  2. --key-file=</path/to/key-file>

Copy

Audit:

  1. /bin/ps -ef | /bin/grep etcd | /bin/grep -v grep

Copy

Expected result:

  1. '--cert-file' is present AND '--key-file' is present

Copy

2.2 Ensure that the --client-cert-auth argument is set to true (Scored)

Result: PASS

Remediation: Edit the etcd pod specification file /etc/kubernetes/manifests/etcd.yaml on the master node and set the below parameter.

  1. --client-cert-auth="true"

Copy

Audit:

  1. /bin/ps -ef | /bin/grep etcd | /bin/grep -v grep

Copy

Expected result:

  1. 'true' is equal to 'true'

Copy

2.3 Ensure that the --auto-tls argument is not set to true (Scored)

Result: PASS

Remediation: Edit the etcd pod specification file /etc/kubernetes/manifests/etcd.yaml on the master node and either remove the --auto-tls parameter or set it to false.

  1. --auto-tls=false

Copy

Audit:

  1. /bin/ps -ef | /bin/grep etcd | /bin/grep -v grep

Copy

Expected result:

  1. '--auto-tls' is not present OR '--auto-tls' is not present

Copy

2.4 Ensure that the --peer-cert-file and --peer-key-file arguments are set as appropriate (Scored)

Result: PASS

Remediation: Follow the etcd service documentation and configure peer TLS encryption as appropriate for your etcd cluster. Then, edit the etcd pod specification file /etc/kubernetes/manifests/etcd.yaml on the master node and set the below parameters.

  1. --peer-client-file=</path/to/peer-cert-file>
  2. --peer-key-file=</path/to/peer-key-file>

Copy

Audit:

  1. /bin/ps -ef | /bin/grep etcd | /bin/grep -v grep

Copy

Expected result:

  1. '--peer-cert-file' is present AND '--peer-key-file' is present

Copy

2.5 Ensure that the --peer-client-cert-auth argument is set to true (Scored)

Result: PASS

Remediation: Edit the etcd pod specification file /etc/kubernetes/manifests/etcd.yaml on the master node and set the below parameter.

  1. --peer-client-cert-auth=true

Copy

Audit:

  1. /bin/ps -ef | /bin/grep etcd | /bin/grep -v grep

Copy

Expected result:

  1. 'true' is equal to 'true'

Copy

2.6 Ensure that the --peer-auto-tls argument is not set to true (Scored)

Result: PASS

Remediation: Edit the etcd pod specification file /etc/kubernetes/manifests/etcd.yaml on the master node and either remove the --peer-auto-tls parameter or set it to false.

  1. --peer-auto-tls=false

Copy

Audit:

  1. /bin/ps -ef | /bin/grep etcd | /bin/grep -v grep

Copy

Expected result:

  1. '--peer-auto-tls' is not present OR '--peer-auto-tls' is present

Copy

3 Control Plane Configuration

3.2 Logging

3.2.1 Ensure that a minimal audit policy is created (Scored)

Result: PASS

Remediation: Create an audit policy file for your cluster.

Audit Script: 3.2.1.sh

  1. #!/bin/bash -e
  2. api_server_bin=${1}
  3. /bin/ps -ef | /bin/grep ${api_server_bin} | /bin/grep -v ${0} | /bin/grep -v grep

Copy

Audit Execution:

  1. ./3.2.1.sh kube-apiserver

Copy

Expected result:

  1. '--audit-policy-file' is present

Copy

4 Worker Node Security Configuration

4.1 Worker Node Configuration Files

4.1.1 Ensure that the kubelet service file permissions are set to 644 or more restrictive (Scored)

Result: Not Applicable

Remediation: RKE doesn’t require or maintain a configuration file for the kubelet service. All configuration is passed in as arguments at container run time.

4.1.2 Ensure that the kubelet service file ownership is set to root:root (Scored)

Result: Not Applicable

Remediation: RKE doesn’t require or maintain a configuration file for the kubelet service. All configuration is passed in as arguments at container run time.

4.1.3 Ensure that the proxy kubeconfig file permissions are set to 644 or more restrictive (Scored)

Result: PASS

Remediation: Run the below command (based on the file location on your system) on the each worker node. For example,

  1. chmod 644 /etc/kubernetes/ssl/kubecfg-kube-proxy.yaml

Copy

Audit:

  1. /bin/sh -c 'if test -e /etc/kubernetes/ssl/kubecfg-kube-proxy.yaml; then stat -c %a /etc/kubernetes/ssl/kubecfg-kube-proxy.yaml; fi'

Copy

Expected result:

  1. '644' is present OR '640' is present OR '600' is equal to '600' OR '444' is present OR '440' is present OR '400' is present OR '000' is present

Copy

4.1.4 Ensure that the proxy kubeconfig file ownership is set to root:root (Scored)

Result: PASS

Remediation: Run the below command (based on the file location on your system) on the each worker node. For example,

  1. chown root:root /etc/kubernetes/ssl/kubecfg-kube-proxy.yaml

Copy

Audit:

  1. /bin/sh -c 'if test -e /etc/kubernetes/ssl/kubecfg-kube-proxy.yaml; then stat -c %U:%G /etc/kubernetes/ssl/kubecfg-kube-proxy.yaml; fi'

Copy

Expected result:

  1. 'root:root' is present

Copy

4.1.5 Ensure that the kubelet.conf file permissions are set to 644 or more restrictive (Scored)

Result: PASS

Remediation: Run the below command (based on the file location on your system) on the each worker node. For example,

  1. chmod 644 /etc/kubernetes/ssl/kubecfg-kube-node.yaml

Copy

Audit:

  1. /bin/sh -c 'if test -e /etc/kubernetes/ssl/kubecfg-kube-node.yaml; then stat -c %a /etc/kubernetes/ssl/kubecfg-kube-node.yaml; fi'

Copy

Expected result:

  1. '644' is present OR '640' is present OR '600' is equal to '600' OR '444' is present OR '440' is present OR '400' is present OR '000' is present

Copy

4.1.6 Ensure that the kubelet.conf file ownership is set to root:root (Scored)

Result: PASS

Remediation: Run the below command (based on the file location on your system) on the each worker node. For example,

  1. chown root:root /etc/kubernetes/ssl/kubecfg-kube-node.yaml

Copy

Audit:

  1. /bin/sh -c 'if test -e /etc/kubernetes/ssl/kubecfg-kube-node.yaml; then stat -c %U:%G /etc/kubernetes/ssl/kubecfg-kube-node.yaml; fi'

Copy

Expected result:

  1. 'root:root' is equal to 'root:root'

Copy

4.1.7 Ensure that the certificate authorities file permissions are set to 644 or more restrictive (Scored)

Result: PASS

Remediation: Run the following command to modify the file permissions of the

  1. `--client-ca-file chmod 644 <filename>`

Copy

Audit:

  1. stat -c %a /etc/kubernetes/ssl/kube-ca.pem

Copy

Expected result:

  1. '644' is equal to '644' OR '640' is present OR '600' is present

Copy

4.1.8 Ensure that the client certificate authorities file ownership is set to root:root (Scored)

Result: PASS

Remediation: Run the following command to modify the ownership of the --client-ca-file.

  1. chown root:root `<filename>`

Copy

Audit:

  1. /bin/sh -c 'if test -e /etc/kubernetes/ssl/kube-ca.pem; then stat -c %U:%G /etc/kubernetes/ssl/kube-ca.pem; fi'

Copy

Expected result:

  1. 'root:root' is equal to 'root:root'

Copy

4.1.9 Ensure that the kubelet configuration file has permissions set to 644 or more restrictive (Scored)

Result: Not Applicable

Remediation: RKE doesn’t require or maintain a configuration file for the kubelet service. All configuration is passed in as arguments at container run time.

4.1.10 Ensure that the kubelet configuration file ownership is set to root:root (Scored)

Result: Not Applicable

Remediation: RKE doesn’t require or maintain a configuration file for the kubelet service. All configuration is passed in as arguments at container run time.

4.2 Kubelet

4.2.1 Ensure that the --anonymous-auth argument is set to false (Scored)

Result: PASS

Remediation: If using a Kubelet config file, edit the file to set authentication: anonymous: enabled to false. If using executable arguments, edit the kubelet service file /etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and set the below parameter in KUBELET_SYSTEM_PODS_ARGS variable.

  1. --anonymous-auth=false

Copy

Based on your system, restart the kubelet service. For example:

  1. systemctl daemon-reload
  2. systemctl restart kubelet.service

Copy

Audit:

  1. /bin/ps -fC kubelet

Copy

Audit Config:

  1. /bin/cat /var/lib/kubelet/config.yaml

Copy

Expected result:

  1. 'false' is equal to 'false'

Copy

4.2.2 Ensure that the --authorization-mode argument is not set to AlwaysAllow (Scored)

Result: PASS

Remediation: If using a Kubelet config file, edit the file to set authorization: mode to Webhook. If using executable arguments, edit the kubelet service file /etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and set the below parameter in KUBELET_AUTHZ_ARGS variable.

  1. --authorization-mode=Webhook

Copy

Based on your system, restart the kubelet service. For example:

  1. systemctl daemon-reload
  2. systemctl restart kubelet.service

Copy

Audit:

  1. /bin/ps -fC kubelet

Copy

Audit Config:

  1. /bin/cat /var/lib/kubelet/config.yaml

Copy

Expected result:

  1. 'Webhook' not have 'AlwaysAllow'

Copy

4.2.3 Ensure that the --client-ca-file argument is set as appropriate (Scored)

Result: PASS

Remediation: If using a Kubelet config file, edit the file to set authentication: x509: clientCAFile to the location of the client CA file. If using command line arguments, edit the kubelet service file /etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and set the below parameter in KUBELET_AUTHZ_ARGS variable.

  1. --client-ca-file=<path/to/client-ca-file>

Copy

Based on your system, restart the kubelet service. For example:

  1. systemctl daemon-reload
  2. systemctl restart kubelet.service

Copy

Audit:

  1. /bin/ps -fC kubelet

Copy

Audit Config:

  1. /bin/cat /var/lib/kubelet/config.yaml

Copy

Expected result:

  1. '--client-ca-file' is present

Copy

4.2.4 Ensure that the --read-only-port argument is set to 0 (Scored)

Result: PASS

Remediation: If using a Kubelet config file, edit the file to set readOnlyPort to 0. If using command line arguments, edit the kubelet service file /etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and set the below parameter in KUBELET_SYSTEM_PODS_ARGS variable.

  1. --read-only-port=0

Copy

Based on your system, restart the kubelet service. For example:

  1. systemctl daemon-reload
  2. systemctl restart kubelet.service

Copy

Audit:

  1. /bin/ps -fC kubelet

Copy

Audit Config:

  1. /bin/cat /var/lib/kubelet/config.yaml

Copy

Expected result:

  1. '0' is equal to '0'

Copy

4.2.5 Ensure that the --streaming-connection-idle-timeout argument is not set to 0 (Scored)

Result: PASS

Remediation: If using a Kubelet config file, edit the file to set streamingConnectionIdleTimeout to a value other than 0. If using command line arguments, edit the kubelet service file /etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and set the below parameter in KUBELET_SYSTEM_PODS_ARGS variable.

  1. --streaming-connection-idle-timeout=5m

Copy

Based on your system, restart the kubelet service. For example:

  1. systemctl daemon-reload
  2. systemctl restart kubelet.service

Copy

Audit:

  1. /bin/ps -fC kubelet

Copy

Audit Config:

  1. /bin/cat /var/lib/kubelet/config.yaml

Copy

Expected result:

  1. '30m' is not equal to '0' OR '--streaming-connection-idle-timeout' is not present

Copy

4.2.6 Ensure that the --protect-kernel-defaults argument is set to true (Scored)

Result: PASS

Remediation: If using a Kubelet config file, edit the file to set protectKernelDefaults: true. If using command line arguments, edit the kubelet service file /etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and set the below parameter in KUBELET_SYSTEM_PODS_ARGS variable.

  1. --protect-kernel-defaults=true

Copy

Based on your system, restart the kubelet service. For example:

  1. systemctl daemon-reload
  2. systemctl restart kubelet.service

Copy

Audit:

  1. /bin/ps -fC kubelet

Copy

Audit Config:

  1. /bin/cat /var/lib/kubelet/config.yaml

Copy

Expected result:

  1. 'true' is equal to 'true'

Copy

4.2.7 Ensure that the --make-iptables-util-chains argument is set to true (Scored)

Result: PASS

Remediation: If using a Kubelet config file, edit the file to set makeIPTablesUtilChains: true. If using command line arguments, edit the kubelet service file /etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and remove the --make-iptables-util-chains argument from the KUBELET_SYSTEM_PODS_ARGS variable. Based on your system, restart the kubelet service. For example:

  1. systemctl daemon-reload
  2. systemctl restart kubelet.service

Copy

Audit:

  1. /bin/ps -fC kubelet

Copy

Audit Config:

  1. /bin/cat /var/lib/kubelet/config.yaml

Copy

Expected result:

  1. 'true' is equal to 'true' OR '--make-iptables-util-chains' is not present

Copy

4.2.10 Ensure that the --tls-cert-file and --tls-private-key-file arguments are set as appropriate (Scored)

Result: Not Applicable

Remediation: RKE doesn’t require or maintain a configuration file for the kubelet service. All configuration is passed in as arguments at container run time.

4.2.11 Ensure that the --rotate-certificates argument is not set to false (Scored)

Result: PASS

Remediation: If using a Kubelet config file, edit the file to add the line rotateCertificates: true or remove it altogether to use the default value. If using command line arguments, edit the kubelet service file /etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and remove --rotate-certificates=false argument from the KUBELET_CERTIFICATE_ARGS variable. Based on your system, restart the kubelet service. For example:

  1. systemctl daemon-reload
  2. systemctl restart kubelet.service

Copy

Audit:

  1. /bin/ps -fC kubelet

Copy

Audit Config:

  1. /bin/cat /var/lib/kubelet/config.yaml

Copy

Expected result:

  1. '--rotate-certificates' is present OR '--rotate-certificates' is not present

Copy

4.2.12 Ensure that the RotateKubeletServerCertificate argument is set to true (Scored)

Result: PASS

Remediation: Edit the kubelet service file /etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and set the below parameter in KUBELET_CERTIFICATE_ARGS variable.

  1. --feature-gates=RotateKubeletServerCertificate=true

Copy

Based on your system, restart the kubelet service. For example:

  1. systemctl daemon-reload
  2. systemctl restart kubelet.service

Copy

Audit:

  1. /bin/ps -fC kubelet

Copy

Audit Config:

  1. /bin/cat /var/lib/kubelet/config.yaml

Copy

Expected result:

  1. 'true' is equal to 'true'

Copy

5 Kubernetes Policies

5.1 RBAC and Service Accounts

5.1.5 Ensure that default service accounts are not actively used. (Scored)

Result: PASS

Remediation: Create explicit service accounts wherever a Kubernetes workload requires specific access to the Kubernetes API server. Modify the configuration of each default service account to include this value

  1. automountServiceAccountToken: false

Copy

Audit Script: 5.1.5.sh

  1. #!/bin/bash
  2. export KUBECONFIG=${KUBECONFIG:-/root/.kube/config}
  3. kubectl version > /dev/null
  4. if [ $? -ne 0 ]; then
  5. echo "fail: kubectl failed"
  6. exit 1
  7. fi
  8. accounts="$(kubectl --kubeconfig=${KUBECONFIG} get serviceaccounts -A -o json | jq -r '.items[] | select(.metadata.name=="default") | select((.automountServiceAccountToken == null) or (.automountServiceAccountToken == true)) | "fail \(.metadata.name) \(.metadata.namespace)"')"
  9. if [[ "${accounts}" != "" ]]; then
  10. echo "fail: automountServiceAccountToken not false for accounts: ${accounts}"
  11. exit 1
  12. fi
  13. default_binding="$(kubectl get rolebindings,clusterrolebindings -A -o json | jq -r '.items[] | select(.subjects[].kind=="ServiceAccount" and .subjects[].name=="default" and .metadata.name=="default").metadata.uid' | wc -l)"
  14. if [[ "${default_binding}" -gt 0 ]]; then
  15. echo "fail: default service accounts have non default bindings"
  16. exit 1
  17. fi
  18. echo "--pass"
  19. exit 0

Copy

Audit Execution:

  1. ./5.1.5.sh

Copy

Expected result:

  1. '--pass' is present

Copy

5.2 Pod Security Policies

5.2.2 Minimize the admission of containers wishing to share the host process ID namespace (Scored)

Result: PASS

Remediation: Create a PSP as described in the Kubernetes documentation, ensuring that the .spec.hostPID field is omitted or set to false.

Audit:

  1. kubectl --kubeconfig=/root/.kube/config get psp -o json | jq .items[] | jq -r 'select((.spec.hostPID == null) or (.spec.hostPID == false))' | jq .metadata.name | wc -l | xargs -I {} echo '--count={}'

Copy

Expected result:

  1. 1 is greater than 0

Copy

5.2.3 Minimize the admission of containers wishing to share the host IPC namespace (Scored)

Result: PASS

Remediation: Create a PSP as described in the Kubernetes documentation, ensuring that the .spec.hostIPC field is omitted or set to false.

Audit:

  1. kubectl --kubeconfig=/root/.kube/config get psp -o json | jq .items[] | jq -r 'select((.spec.hostIPC == null) or (.spec.hostIPC == false))' | jq .metadata.name | wc -l | xargs -I {} echo '--count={}'

Copy

Expected result:

  1. 1 is greater than 0

Copy

5.2.4 Minimize the admission of containers wishing to share the host network namespace (Scored)

Result: PASS

Remediation: Create a PSP as described in the Kubernetes documentation, ensuring that the .spec.hostNetwork field is omitted or set to false.

Audit:

  1. kubectl --kubeconfig=/root/.kube/config get psp -o json | jq .items[] | jq -r 'select((.spec.hostNetwork == null) or (.spec.hostNetwork == false))' | jq .metadata.name | wc -l | xargs -I {} echo '--count={}'

Copy

Expected result:

  1. 1 is greater than 0

Copy

5.2.5 Minimize the admission of containers with allowPrivilegeEscalation (Scored)

Result: PASS

Remediation: Create a PSP as described in the Kubernetes documentation, ensuring that the .spec.allowPrivilegeEscalation field is omitted or set to false.

Audit:

  1. kubectl --kubeconfig=/root/.kube/config get psp -o json | jq .items[] | jq -r 'select((.spec.allowPrivilegeEscalation == null) or (.spec.allowPrivilegeEscalation == false))' | jq .metadata.name | wc -l | xargs -I {} echo '--count={}'

Copy

Expected result:

  1. 1 is greater than 0

Copy

5.3 Network Policies and CNI

5.3.2 Ensure that all Namespaces have Network Policies defined (Scored)

Result: PASS

Remediation: Follow the documentation and create NetworkPolicy objects as you need them.

Audit Script: 5.3.2.sh

  1. #!/bin/bash -e
  2. export KUBECONFIG=${KUBECONFIG:-"/root/.kube/config"}
  3. kubectl version > /dev/null
  4. if [ $? -ne 0 ]; then
  5. echo "fail: kubectl failed"
  6. exit 1
  7. fi
  8. for namespace in $(kubectl get namespaces -o custom-columns=NAME:.metadata.name --no-headers); do
  9. policy_count=$(kubectl get networkpolicy -n ${namespace} -o json | jq '.items | length')
  10. if [ ${policy_count} -eq 0 ]; then
  11. echo "fail: ${namespace}"
  12. exit 1
  13. fi
  14. done
  15. echo "pass"

Copy

Audit Execution:

  1. ./5.3.2.sh

Copy

Expected result:

  1. 'pass' is present

Copy

5.6 General Policies

5.6.4 The default namespace should not be used (Scored)

Result: PASS

Remediation: Ensure that namespaces are created to allow for appropriate segregation of Kubernetes resources and that all new resources are created in a specific namespace.

Audit Script: 5.6.4.sh

  1. #!/bin/bash -e
  2. export KUBECONFIG=${KUBECONFIG:-/root/.kube/config}
  3. kubectl version > /dev/null
  4. if [[ $? -gt 0 ]]; then
  5. echo "fail: kubectl failed"
  6. exit 1
  7. fi
  8. default_resources=$(kubectl get all -o json | jq --compact-output '.items[] | select((.kind == "Service") and (.metadata.name == "kubernetes") and (.metadata.namespace == "default") | not)' | wc -l)
  9. echo "--count=${default_resources}"

Copy

Audit Execution:

  1. ./5.6.4.sh

Copy

Expected result:

  1. '0' is equal to '0'

Copy