An Example Program Using Structs

To understand when we might want to use structs, let’s write a program that calculates the area of a rectangle. We’ll start by using single variables, and then refactor the program until we’re using structs instead.

Let’s make a new binary project with Cargo called rectangles that will take the width and height of a rectangle specified in pixels and calculate the area of the rectangle. Listing 5-8 shows a short program with one way of doing exactly that in our project’s src/main.rs.

Filename: src/main.rs

  1. fn main() {
  2. let width1 = 30;
  3. let height1 = 50;
  4. println!(
  5. "The area of the rectangle is {} square pixels.",
  6. area(width1, height1)
  7. );
  8. }
  9. fn area(width: u32, height: u32) -> u32 {
  10. width * height
  11. }

Listing 5-8: Calculating the area of a rectangle specified by separate width and height variables

Now, run this program using cargo run:

  1. $ cargo run
  2. Compiling rectangles v0.1.0 (file:///projects/rectangles)
  3. Finished dev [unoptimized + debuginfo] target(s) in 0.42s
  4. Running `target/debug/rectangles`
  5. The area of the rectangle is 1500 square pixels.

This code succeeds in figuring out the area of the rectangle by calling the area function with each dimension, but we can do more to make this code clear and readable.

The issue with this code is evident in the signature of area:

  1. fn main() {
  2. let width1 = 30;
  3. let height1 = 50;
  4. println!(
  5. "The area of the rectangle is {} square pixels.",
  6. area(width1, height1)
  7. );
  8. }
  9. fn area(width: u32, height: u32) -> u32 {
  10. width * height
  11. }

The area function is supposed to calculate the area of one rectangle, but the function we wrote has two parameters, and it’s not clear anywhere in our program that the parameters are related. It would be more readable and more manageable to group width and height together. We’ve already discussed one way we might do that in “The Tuple Type” section of Chapter 3: by using tuples.

Refactoring with Tuples

Listing 5-9 shows another version of our program that uses tuples.

Filename: src/main.rs

  1. fn main() {
  2. let rect1 = (30, 50);
  3. println!(
  4. "The area of the rectangle is {} square pixels.",
  5. area(rect1)
  6. );
  7. }
  8. fn area(dimensions: (u32, u32)) -> u32 {
  9. dimensions.0 * dimensions.1
  10. }

Listing 5-9: Specifying the width and height of the rectangle with a tuple

In one way, this program is better. Tuples let us add a bit of structure, and we’re now passing just one argument. But in another way, this version is less clear: tuples don’t name their elements, so we have to index into the parts of the tuple, making our calculation less obvious.

Mixing up the width and height wouldn’t matter for the area calculation, but if we want to draw the rectangle on the screen, it would matter! We would have to keep in mind that width is the tuple index 0 and height is the tuple index 1. This would be even harder for someone else to figure out and keep in mind if they were to use our code. Because we haven’t conveyed the meaning of our data in our code, it’s now easier to introduce errors.

Refactoring with Structs: Adding More Meaning

We use structs to add meaning by labeling the data. We can transform the tuple we’re using into a struct with a name for the whole as well as names for the parts, as shown in Listing 5-10.

Filename: src/main.rs

  1. struct Rectangle {
  2. width: u32,
  3. height: u32,
  4. }
  5. fn main() {
  6. let rect1 = Rectangle {
  7. width: 30,
  8. height: 50,
  9. };
  10. println!(
  11. "The area of the rectangle is {} square pixels.",
  12. area(&rect1)
  13. );
  14. }
  15. fn area(rectangle: &Rectangle) -> u32 {
  16. rectangle.width * rectangle.height
  17. }

Listing 5-10: Defining a Rectangle struct

Here we’ve defined a struct and named it Rectangle. Inside the curly brackets, we defined the fields as width and height, both of which have type u32. Then in main, we created a particular instance of Rectangle that has a width of 30 and a height of 50.

Our area function is now defined with one parameter, which we’ve named rectangle, whose type is an immutable borrow of a struct Rectangle instance. As mentioned in Chapter 4, we want to borrow the struct rather than take ownership of it. This way, main retains its ownership and can continue using rect1, which is the reason we use the & in the function signature and where we call the function.

The area function accesses the width and height fields of the Rectangle instance (note that accessing fields of a borrowed struct instance does not move the field values, which is why you often see borrows of structs). Our function signature for area now says exactly what we mean: calculate the area of Rectangle, using its width and height fields. This conveys that the width and height are related to each other, and it gives descriptive names to the values rather than using the tuple index values of 0 and 1. This is a win for clarity.

Adding Useful Functionality with Derived Traits

It’d be useful to be able to print an instance of Rectangle while we’re debugging our program and see the values for all its fields. Listing 5-11 tries using the println! macro as we have used in previous chapters. This won’t work, however.

Filename: src/main.rs

  1. struct Rectangle {
  2. width: u32,
  3. height: u32,
  4. }
  5. fn main() {
  6. let rect1 = Rectangle {
  7. width: 30,
  8. height: 50,
  9. };
  10. println!("rect1 is {}", rect1);
  11. }

Listing 5-11: Attempting to print a Rectangle instance

When we compile this code, we get an error with this core message:

  1. error[E0277]: `Rectangle` doesn't implement `std::fmt::Display`

The println! macro can do many kinds of formatting, and by default, the curly brackets tell println! to use formatting known as Display: output intended for direct end user consumption. The primitive types we’ve seen so far implement Display by default, because there’s only one way you’d want to show a 1 or any other primitive type to a user. But with structs, the way println! should format the output is less clear because there are more display possibilities: Do you want commas or not? Do you want to print the curly brackets? Should all the fields be shown? Due to this ambiguity, Rust doesn’t try to guess what we want, and structs don’t have a provided implementation of Display to use with println! and the {} placeholder.

If we continue reading the errors, we’ll find this helpful note:

  1. = help: the trait `std::fmt::Display` is not implemented for `Rectangle`
  2. = note: in format strings you may be able to use `{:?}` (or {:#?} for pretty-print) instead

Let’s try it! The println! macro call will now look like println!("rect1 is {:?}", rect1);. Putting the specifier :? inside the curly brackets tells println! we want to use an output format called Debug. The Debug trait enables us to print our struct in a way that is useful for developers so we can see its value while we’re debugging our code.

Compile the code with this change. Drat! We still get an error:

  1. error[E0277]: `Rectangle` doesn't implement `Debug`

But again, the compiler gives us a helpful note:

  1. = help: the trait `Debug` is not implemented for `Rectangle`
  2. = note: add `#[derive(Debug)]` to `Rectangle` or manually `impl Debug for Rectangle`

Rust does include functionality to print out debugging information, but we have to explicitly opt in to make that functionality available for our struct. To do that, we add the outer attribute #[derive(Debug)] just before the struct definition, as shown in Listing 5-12.

Filename: src/main.rs

  1. #[derive(Debug)]
  2. struct Rectangle {
  3. width: u32,
  4. height: u32,
  5. }
  6. fn main() {
  7. let rect1 = Rectangle {
  8. width: 30,
  9. height: 50,
  10. };
  11. println!("rect1 is {:?}", rect1);
  12. }

Listing 5-12: Adding the attribute to derive the Debug trait and printing the Rectangle instance using debug formatting

Now when we run the program, we won’t get any errors, and we’ll see the following output:

  1. $ cargo run
  2. Compiling rectangles v0.1.0 (file:///projects/rectangles)
  3. Finished dev [unoptimized + debuginfo] target(s) in 0.48s
  4. Running `target/debug/rectangles`
  5. rect1 is Rectangle { width: 30, height: 50 }

Nice! It’s not the prettiest output, but it shows the values of all the fields for this instance, which would definitely help during debugging. When we have larger structs, it’s useful to have output that’s a bit easier to read; in those cases, we can use {:#?} instead of {:?} in the println! string. In this example, using the {:#?} style will output:

  1. $ cargo run
  2. Compiling rectangles v0.1.0 (file:///projects/rectangles)
  3. Finished dev [unoptimized + debuginfo] target(s) in 0.48s
  4. Running `target/debug/rectangles`
  5. rect1 is Rectangle {
  6. width: 30,
  7. height: 50,
  8. }

Another way to print out a value using the Debug format is to use the dbg! macro, which takes ownership of an expression (as opposed to println! that takes a reference), prints the file and line number of where that dbg! macro call occurs in your code along with the resulting value of that expression, and returns ownership of the value.

Note: Calling the dbg! macro prints to the standard error console stream (stderr), as opposed to println! which prints to the standard output console stream (stdout). We’ll talk more about stderr and stdout in the ““Writing Error Messages to Standard Error Instead of Standard Output” section in Chapter 12.

Here’s an example where we’re interested in the value that gets assigned to the width field, as well as the value of the whole struct in rect1:

  1. #[derive(Debug)]
  2. struct Rectangle {
  3. width: u32,
  4. height: u32,
  5. }
  6. fn main() {
  7. let scale = 2;
  8. let rect1 = Rectangle {
  9. width: dbg!(30 * scale),
  10. height: 50,
  11. };
  12. dbg!(&rect1);
  13. }

We can put dbg! around the expression 30 * scale and, because dbg! returns ownership of the expression’s value, the width field will get the same value as if we didn’t have the dbg! call there. We don’t want dbg! to take ownership of rect1, so we use a reference to rect1 in the next call. Here’s what the output of this example looks like:

  1. $ cargo run
  2. Compiling rectangles v0.1.0 (file:///projects/rectangles)
  3. Finished dev [unoptimized + debuginfo] target(s) in 0.61s
  4. Running `target/debug/rectangles`
  5. [src/main.rs:10] 30 * scale = 60
  6. [src/main.rs:14] &rect1 = Rectangle {
  7. width: 60,
  8. height: 50,
  9. }

We can see the first bit of output came from src/main.rs line 10, where we’re debugging the expression 30 * scale, and its resulting value is 60 (the Debug formatting implemented for integers is to print only their value). The dbg! call on line 14 of src/main.rs outputs the value of &rect1, which is the Rectangle struct. This output uses the pretty Debug formatting of the Rectangle type. The dbg! macro can be really helpful when you’re trying to figure out what your code is doing!

In addition to the Debug trait, Rust has provided a number of traits for us to use with the derive attribute that can add useful behavior to our custom types. Those traits and their behaviors are listed in Appendix C. We’ll cover how to implement these traits with custom behavior as well as how to create your own traits in Chapter 10. There are also many attributes other than derive; for more information, see the “Attributes” section of the Rust Reference.

Our area function is very specific: it only computes the area of rectangles. It would be helpful to tie this behavior more closely to our Rectangle struct, because it won’t work with any other type. Let’s look at how we can continue to refactor this code by turning the area function into an area method defined on our Rectangle type.