Installation using Rancher Kubernetes Engine

This guide walks you through installation of Cilium on Rancher Kubernetes Engine, a CNCF-certified Kubernetes distribution that runs entirely within Docker containers. RKE solves the common frustration of installation complexity with Kubernetes by removing most host dependencies and presenting a stable path for deployment, upgrades, and rollbacks.

Install a Cluster Using RKE

The first step is to install a cluster based on the RKE Installation Guide. When creating the cluster, make sure to change the default network plugin in the config.yaml file.

Change:

  1. network:
  2. options:
  3. flannel_backend_type: "vxlan"
  4. plugin: "canal"

To:

  1. network:
  2. plugin: none

Deploy Cilium

Helm v3

Cilium CLI

Install Cilium via helm install:

  1. helm repo add cilium https://helm.cilium.io
  2. helm repo update
  3. helm install cilium cilium/cilium --version 1.11.7 \
  4. --namespace $CILIUM_NAMESPACE

Install the latest version of the Cilium CLI. The Cilium CLI can be used to install Cilium, inspect the state of a Cilium installation, and enable/disable various features (e.g. clustermesh, Hubble).

Linux

macOS

Other

  1. curl -L --remote-name-all https://github.com/cilium/cilium-cli/releases/latest/download/cilium-linux-amd64.tar.gz{,.sha256sum}
  2. sha256sum --check cilium-linux-amd64.tar.gz.sha256sum
  3. sudo tar xzvfC cilium-linux-amd64.tar.gz /usr/local/bin
  4. rm cilium-linux-amd64.tar.gz{,.sha256sum}
  1. curl -L --remote-name-all https://github.com/cilium/cilium-cli/releases/latest/download/cilium-darwin-amd64.tar.gz{,.sha256sum}
  2. shasum -a 256 -c cilium-darwin-amd64.tar.gz.sha256sum
  3. sudo tar xzvfC cilium-darwin-amd64.tar.gz /usr/local/bin
  4. rm cilium-darwin-amd64.tar.gz{,.sha256sum}

See the full page of releases.

Install Cilium by running:

  1. cilium install

Restart unmanaged Pods

If you did not create a cluster with the nodes tainted with the taint node.cilium.io/agent-not-ready, then unmanaged pods need to be restarted manually. Restart all already running pods which are not running in host-networking mode to ensure that Cilium starts managing them. This is required to ensure that all pods which have been running before Cilium was deployed have network connectivity provided by Cilium and NetworkPolicy applies to them:

  1. $ kubectl get pods --all-namespaces -o custom-columns=NAMESPACE:.metadata.namespace,NAME:.metadata.name,HOSTNETWORK:.spec.hostNetwork --no-headers=true | grep '<none>' | awk '{print "-n "$1" "$2}' | xargs -L 1 -r kubectl delete pod
  2. pod "event-exporter-v0.2.3-f9c896d75-cbvcz" deleted
  3. pod "fluentd-gcp-scaler-69d79984cb-nfwwk" deleted
  4. pod "heapster-v1.6.0-beta.1-56d5d5d87f-qw8pv" deleted
  5. pod "kube-dns-5f8689dbc9-2nzft" deleted
  6. pod "kube-dns-5f8689dbc9-j7x5f" deleted
  7. pod "kube-dns-autoscaler-76fcd5f658-22r72" deleted
  8. pod "kube-state-metrics-7d9774bbd5-n6m5k" deleted
  9. pod "l7-default-backend-6f8697844f-d2rq2" deleted
  10. pod "metrics-server-v0.3.1-54699c9cc8-7l5w2" deleted

Note

This may error out on macOS due to -r being unsupported by xargs. In this case you can safely run this command without -r with the symptom that this will hang if there are no pods to restart. You can stop this with ctrl-c.

Validate the Installation

Cilium CLI

Manually

Install the latest version of the Cilium CLI. The Cilium CLI can be used to install Cilium, inspect the state of a Cilium installation, and enable/disable various features (e.g. clustermesh, Hubble).

Linux

macOS

Other

  1. curl -L --remote-name-all https://github.com/cilium/cilium-cli/releases/latest/download/cilium-linux-amd64.tar.gz{,.sha256sum}
  2. sha256sum --check cilium-linux-amd64.tar.gz.sha256sum
  3. sudo tar xzvfC cilium-linux-amd64.tar.gz /usr/local/bin
  4. rm cilium-linux-amd64.tar.gz{,.sha256sum}
  1. curl -L --remote-name-all https://github.com/cilium/cilium-cli/releases/latest/download/cilium-darwin-amd64.tar.gz{,.sha256sum}
  2. shasum -a 256 -c cilium-darwin-amd64.tar.gz.sha256sum
  3. sudo tar xzvfC cilium-darwin-amd64.tar.gz /usr/local/bin
  4. rm cilium-darwin-amd64.tar.gz{,.sha256sum}

See the full page of releases.

To validate that Cilium has been properly installed, you can run

  1. $ cilium status --wait
  2. /¯¯\
  3. /¯¯\__/¯¯\ Cilium: OK
  4. \__/¯¯\__/ Operator: OK
  5. /¯¯\__/¯¯\ Hubble: disabled
  6. \__/¯¯\__/ ClusterMesh: disabled
  7. \__/
  8. DaemonSet cilium Desired: 2, Ready: 2/2, Available: 2/2
  9. Deployment cilium-operator Desired: 2, Ready: 2/2, Available: 2/2
  10. Containers: cilium-operator Running: 2
  11. cilium Running: 2
  12. Image versions cilium quay.io/cilium/cilium:v1.9.5: 2
  13. cilium-operator quay.io/cilium/operator-generic:v1.9.5: 2

Run the following command to validate that your cluster has proper network connectivity:

  1. $ cilium connectivity test
  2. ℹ️ Monitor aggregation detected, will skip some flow validation steps
  3. [k8s-cluster] Creating namespace for connectivity check...
  4. (...)
  5. ---------------------------------------------------------------------------------------------------------------------
  6. 📋 Test Report
  7. ---------------------------------------------------------------------------------------------------------------------
  8. 69/69 tests successful (0 warnings)

Congratulations! You have a fully functional Kubernetes cluster with Cilium. 🎉

You can monitor as Cilium and all required components are being installed:

  1. $ kubectl -n kube-system get pods --watch
  2. NAME READY STATUS RESTARTS AGE
  3. cilium-operator-cb4578bc5-q52qk 0/1 Pending 0 8s
  4. cilium-s8w5m 0/1 PodInitializing 0 7s
  5. coredns-86c58d9df4-4g7dd 0/1 ContainerCreating 0 8m57s
  6. coredns-86c58d9df4-4l6b2 0/1 ContainerCreating 0 8m57s

It may take a couple of minutes for all components to come up:

  1. cilium-operator-cb4578bc5-q52qk 1/1 Running 0 4m13s
  2. cilium-s8w5m 1/1 Running 0 4m12s
  3. coredns-86c58d9df4-4g7dd 1/1 Running 0 13m
  4. coredns-86c58d9df4-4l6b2 1/1 Running 0 13m

You can deploy the “connectivity-check” to test connectivity between pods. It is recommended to create a separate namespace for this.

  1. kubectl create ns cilium-test

Deploy the check with:

  1. kubectl apply -n cilium-test -f https://raw.githubusercontent.com/cilium/cilium/v1.11/examples/kubernetes/connectivity-check/connectivity-check.yaml

It will deploy a series of deployments which will use various connectivity paths to connect to each other. Connectivity paths include with and without service load-balancing and various network policy combinations. The pod name indicates the connectivity variant and the readiness and liveness gate indicates success or failure of the test:

  1. $ kubectl get pods -n cilium-test
  2. NAME READY STATUS RESTARTS AGE
  3. echo-a-76c5d9bd76-q8d99 1/1 Running 0 66s
  4. echo-b-795c4b4f76-9wrrx 1/1 Running 0 66s
  5. echo-b-host-6b7fc94b7c-xtsff 1/1 Running 0 66s
  6. host-to-b-multi-node-clusterip-85476cd779-bpg4b 1/1 Running 0 66s
  7. host-to-b-multi-node-headless-dc6c44cb5-8jdz8 1/1 Running 0 65s
  8. pod-to-a-79546bc469-rl2qq 1/1 Running 0 66s
  9. pod-to-a-allowed-cnp-58b7f7fb8f-lkq7p 1/1 Running 0 66s
  10. pod-to-a-denied-cnp-6967cb6f7f-7h9fn 1/1 Running 0 66s
  11. pod-to-b-intra-node-nodeport-9b487cf89-6ptrt 1/1 Running 0 65s
  12. pod-to-b-multi-node-clusterip-7db5dfdcf7-jkjpw 1/1 Running 0 66s
  13. pod-to-b-multi-node-headless-7d44b85d69-mtscc 1/1 Running 0 66s
  14. pod-to-b-multi-node-nodeport-7ffc76db7c-rrw82 1/1 Running 0 65s
  15. pod-to-external-1111-d56f47579-d79dz 1/1 Running 0 66s
  16. pod-to-external-fqdn-allow-google-cnp-78986f4bcf-btjn7 1/1 Running 0 66s

Note

If you deploy the connectivity check to a single node cluster, pods that check multi-node functionalities will remain in the Pending state. This is expected since these pods need at least 2 nodes to be scheduled successfully.

Once done with the test, remove the cilium-test namespace:

  1. kubectl delete ns cilium-test

Next Steps