kube-scheduler Configuration (v1beta2)

Resource Types

DefaultPreemptionArgs

DefaultPreemptionArgs holds arguments used to configure the DefaultPreemption plugin.

FieldDescription
apiVersion
string
kubescheduler.config.k8s.io/v1beta2
kind
string
DefaultPreemptionArgs
minCandidateNodesPercentage [Required]
int32
MinCandidateNodesPercentage is the minimum number of candidates to shortlist when dry running preemption as a percentage of number of nodes. Must be in the range [0, 100]. Defaults to 10% of the cluster size if unspecified.
minCandidateNodesAbsolute [Required]
int32
MinCandidateNodesAbsolute is the absolute minimum number of candidates to shortlist. The likely number of candidates enumerated for dry running preemption is given by the formula: numCandidates = max(numNodes ∗ minCandidateNodesPercentage, minCandidateNodesAbsolute) We say “likely” because there are other factors such as PDB violations that play a role in the number of candidates shortlisted. Must be at least 0 nodes. Defaults to 100 nodes if unspecified.

InterPodAffinityArgs

InterPodAffinityArgs holds arguments used to configure the InterPodAffinity plugin.

FieldDescription
apiVersion
string
kubescheduler.config.k8s.io/v1beta2
kind
string
InterPodAffinityArgs
hardPodAffinityWeight [Required]
int32
HardPodAffinityWeight is the scoring weight for existing pods with a matching hard affinity to the incoming pod.

KubeSchedulerConfiguration

KubeSchedulerConfiguration configures a scheduler

FieldDescription
apiVersion
string
kubescheduler.config.k8s.io/v1beta2
kind
string
KubeSchedulerConfiguration
parallelism [Required]
int32
Parallelism defines the amount of parallelism in algorithms for scheduling a Pods. Must be greater than 0. Defaults to 16
leaderElection [Required]
LeaderElectionConfiguration
LeaderElection defines the configuration of leader election client.
clientConnection [Required]
ClientConnectionConfiguration
ClientConnection specifies the kubeconfig file and client connection settings for the proxy server to use when communicating with the apiserver.
healthzBindAddress [Required]
string
Note: Both HealthzBindAddress and MetricsBindAddress fields are deprecated. Only empty address or port 0 is allowed. Anything else will fail validation. HealthzBindAddress is the IP address and port for the health check server to serve on.
metricsBindAddress [Required]
string
MetricsBindAddress is the IP address and port for the metrics server to serve on.
DebuggingConfiguration [Required]
DebuggingConfiguration
(Members of DebuggingConfiguration are embedded into this type.) DebuggingConfiguration holds configuration for Debugging related features TODO: We might wanna make this a substruct like Debugging componentbaseconfigv1alpha1.DebuggingConfiguration
percentageOfNodesToScore [Required]
int32
PercentageOfNodesToScore is the percentage of all nodes that once found feasible for running a pod, the scheduler stops its search for more feasible nodes in the cluster. This helps improve scheduler’s performance. Scheduler always tries to find at least “minFeasibleNodesToFind” feasible nodes no matter what the value of this flag is. Example: if the cluster size is 500 nodes and the value of this flag is 30, then scheduler stops finding further feasible nodes once it finds 150 feasible ones. When the value is 0, default percentage (5%—50% based on the size of the cluster) of the nodes will be scored.
podInitialBackoffSeconds [Required]
int64
PodInitialBackoffSeconds is the initial backoff for unschedulable pods. If specified, it must be greater than 0. If this value is null, the default value (1s) will be used.
podMaxBackoffSeconds [Required]
int64
PodMaxBackoffSeconds is the max backoff for unschedulable pods. If specified, it must be greater than podInitialBackoffSeconds. If this value is null, the default value (10s) will be used.
profiles [Required]
[]KubeSchedulerProfile
Profiles are scheduling profiles that kube-scheduler supports. Pods can choose to be scheduled under a particular profile by setting its associated scheduler name. Pods that don’t specify any scheduler name are scheduled with the “default-scheduler” profile, if present here.
extenders [Required]
[]Extender
Extenders are the list of scheduler extenders, each holding the values of how to communicate with the extender. These extenders are shared by all scheduler profiles.

NodeAffinityArgs

NodeAffinityArgs holds arguments to configure the NodeAffinity plugin.

FieldDescription
apiVersion
string
kubescheduler.config.k8s.io/v1beta2
kind
string
NodeAffinityArgs
addedAffinity
core/v1.NodeAffinity
AddedAffinity is applied to all Pods additionally to the NodeAffinity specified in the PodSpec. That is, Nodes need to satisfy AddedAffinity AND .spec.NodeAffinity. AddedAffinity is empty by default (all Nodes match). When AddedAffinity is used, some Pods with affinity requirements that match a specific Node (such as Daemonset Pods) might remain unschedulable.

NodeResourcesBalancedAllocationArgs

NodeResourcesBalancedAllocationArgs holds arguments used to configure NodeResourcesBalancedAllocation plugin.

FieldDescription
apiVersion
string
kubescheduler.config.k8s.io/v1beta2
kind
string
NodeResourcesBalancedAllocationArgs
resources [Required]
[]ResourceSpec
Resources to be managed, the default is “cpu” and “memory” if not specified.

NodeResourcesFitArgs

NodeResourcesFitArgs holds arguments used to configure the NodeResourcesFit plugin.

FieldDescription
apiVersion
string
kubescheduler.config.k8s.io/v1beta2
kind
string
NodeResourcesFitArgs
ignoredResources [Required]
[]string
IgnoredResources is the list of resources that NodeResources fit filter should ignore. This doesn’t apply to scoring.
ignoredResourceGroups [Required]
[]string
IgnoredResourceGroups defines the list of resource groups that NodeResources fit filter should ignore. e.g. if group is [“example.com”], it will ignore all resource names that begin with “example.com”, such as “example.com/aaa” and “example.com/bbb”. A resource group name can’t contain ‘/‘. This doesn’t apply to scoring.
scoringStrategy [Required]
ScoringStrategy
ScoringStrategy selects the node resource scoring strategy. The default strategy is LeastAllocated with an equal “cpu” and “memory” weight.

PodTopologySpreadArgs

PodTopologySpreadArgs holds arguments used to configure the PodTopologySpread plugin.

FieldDescription
apiVersion
string
kubescheduler.config.k8s.io/v1beta2
kind
string
PodTopologySpreadArgs
defaultConstraints
[]core/v1.TopologySpreadConstraint
DefaultConstraints defines topology spread constraints to be applied to Pods that don’t define any in pod.spec.topologySpreadConstraints. .defaultConstraints[∗].labelSelectors must be empty, as they are deduced from the Pod’s membership to Services, ReplicationControllers, ReplicaSets or StatefulSets. When not empty, .defaultingType must be “List”.
defaultingType
PodTopologySpreadConstraintsDefaulting
DefaultingType determines how .defaultConstraints are deduced. Can be one of “System” or “List”.
  • “System”: Use kubernetes defined constraints that spread Pods among Nodes and Zones.
  • “List”: Use constraints defined in .defaultConstraints.

Defaults to “List” if feature gate DefaultPodTopologySpread is disabled and to “System” if enabled.

VolumeBindingArgs

VolumeBindingArgs holds arguments used to configure the VolumeBinding plugin.

FieldDescription
apiVersion
string
kubescheduler.config.k8s.io/v1beta2
kind
string
VolumeBindingArgs
bindTimeoutSeconds [Required]
int64
BindTimeoutSeconds is the timeout in seconds in volume binding operation. Value must be non-negative integer. The value zero indicates no waiting. If this value is nil, the default value (600) will be used.
shape
[]UtilizationShapePoint
Shape specifies the points defining the score function shape, which is used to score nodes based on the utilization of statically provisioned PVs. The utilization is calculated by dividing the total requested storage of the pod by the total capacity of feasible PVs on each node. Each point contains utilization (ranges from 0 to 100) and its associated score (ranges from 0 to 10). You can turn the priority by specifying different scores for different utilization numbers. The default shape points are: 1) 0 for 0 utilization 2) 10 for 100 utilization All points must be sorted in increasing order by utilization.

Extender

Appears in:

Extender holds the parameters used to communicate with the extender. If a verb is unspecified/empty, it is assumed that the extender chose not to provide that extension.

FieldDescription
urlPrefix [Required]
string
URLPrefix at which the extender is available
filterVerb [Required]
string
Verb for the filter call, empty if not supported. This verb is appended to the URLPrefix when issuing the filter call to extender.
preemptVerb [Required]
string
Verb for the preempt call, empty if not supported. This verb is appended to the URLPrefix when issuing the preempt call to extender.
prioritizeVerb [Required]
string
Verb for the prioritize call, empty if not supported. This verb is appended to the URLPrefix when issuing the prioritize call to extender.
weight [Required]
int64
The numeric multiplier for the node scores that the prioritize call generates. The weight should be a positive integer
bindVerb [Required]
string
Verb for the bind call, empty if not supported. This verb is appended to the URLPrefix when issuing the bind call to extender. If this method is implemented by the extender, it is the extender’s responsibility to bind the pod to apiserver. Only one extender can implement this function.
enableHTTPS [Required]
bool
EnableHTTPS specifies whether https should be used to communicate with the extender
tlsConfig [Required]
ExtenderTLSConfig
TLSConfig specifies the transport layer security config
httpTimeout [Required]
meta/v1.Duration
HTTPTimeout specifies the timeout duration for a call to the extender. Filter timeout fails the scheduling of the pod. Prioritize timeout is ignored, k8s/other extenders priorities are used to select the node.
nodeCacheCapable [Required]
bool
NodeCacheCapable specifies that the extender is capable of caching node information, so the scheduler should only send minimal information about the eligible nodes assuming that the extender already cached full details of all nodes in the cluster
managedResources
[]ExtenderManagedResource
ManagedResources is a list of extended resources that are managed by this extender. - A pod will be sent to the extender on the Filter, Prioritize and Bind (if the extender is the binder) phases iff the pod requests at least one of the extended resources in this list. If empty or unspecified, all pods will be sent to this extender. - If IgnoredByScheduler is set to true for a resource, kube-scheduler will skip checking the resource in predicates.
ignorable [Required]
bool
Ignorable specifies if the extender is ignorable, i.e. scheduling should not fail when the extender returns an error or is not reachable.

ExtenderManagedResource

Appears in:

ExtenderManagedResource describes the arguments of extended resources managed by an extender.

FieldDescription
name [Required]
string
Name is the extended resource name.
ignoredByScheduler [Required]
bool
IgnoredByScheduler indicates whether kube-scheduler should ignore this resource when applying predicates.

ExtenderTLSConfig

Appears in:

ExtenderTLSConfig contains settings to enable TLS with extender

FieldDescription
insecure [Required]
bool
Server should be accessed without verifying the TLS certificate. For testing only.
serverName [Required]
string
ServerName is passed to the server for SNI and is used in the client to check server certificates against. If ServerName is empty, the hostname used to contact the server is used.
certFile [Required]
string
Server requires TLS client certificate authentication
keyFile [Required]
string
Server requires TLS client certificate authentication
caFile [Required]
string
Trusted root certificates for server
certData [Required]
[]byte
CertData holds PEM-encoded bytes (typically read from a client certificate file). CertData takes precedence over CertFile
keyData [Required]
[]byte
KeyData holds PEM-encoded bytes (typically read from a client certificate key file). KeyData takes precedence over KeyFile
caData [Required]
[]byte
CAData holds PEM-encoded bytes (typically read from a root certificates bundle). CAData takes precedence over CAFile

KubeSchedulerProfile

Appears in:

KubeSchedulerProfile is a scheduling profile.

FieldDescription
schedulerName [Required]
string
SchedulerName is the name of the scheduler associated to this profile. If SchedulerName matches with the pod’s “spec.schedulerName”, then the pod is scheduled with this profile.
plugins [Required]
Plugins
Plugins specify the set of plugins that should be enabled or disabled. Enabled plugins are the ones that should be enabled in addition to the default plugins. Disabled plugins are any of the default plugins that should be disabled. When no enabled or disabled plugin is specified for an extension point, default plugins for that extension point will be used if there is any. If a QueueSort plugin is specified, the same QueueSort Plugin and PluginConfig must be specified for all profiles.
pluginConfig [Required]
[]PluginConfig
PluginConfig is an optional set of custom plugin arguments for each plugin. Omitting config args for a plugin is equivalent to using the default config for that plugin.

Plugin

Appears in:

Plugin specifies a plugin name and its weight when applicable. Weight is used only for Score plugins.

FieldDescription
name [Required]
string
Name defines the name of plugin
weight [Required]
int32
Weight defines the weight of plugin, only used for Score plugins.

PluginConfig

Appears in:

PluginConfig specifies arguments that should be passed to a plugin at the time of initialization. A plugin that is invoked at multiple extension points is initialized once. Args can have arbitrary structure. It is up to the plugin to process these Args.

FieldDescription
name [Required]
string
Name defines the name of plugin being configured
args [Required]
k8s.io/apimachinery/pkg/runtime.RawExtension
Args defines the arguments passed to the plugins at the time of initialization. Args can have arbitrary structure.

PluginSet

Appears in:

PluginSet specifies enabled and disabled plugins for an extension point. If an array is empty, missing, or nil, default plugins at that extension point will be used.

FieldDescription
enabled [Required]
[]Plugin
Enabled specifies plugins that should be enabled in addition to default plugins. If the default plugin is also configured in the scheduler config file, the weight of plugin will be overridden accordingly. These are called after default plugins and in the same order specified here.
disabled [Required]
[]Plugin
Disabled specifies default plugins that should be disabled. When all default plugins need to be disabled, an array containing only one “∗” should be provided.

Plugins

Appears in:

Plugins include multiple extension points. When specified, the list of plugins for a particular extension point are the only ones enabled. If an extension point is omitted from the config, then the default set of plugins is used for that extension point. Enabled plugins are called in the order specified here, after default plugins. If they need to be invoked before default plugins, default plugins must be disabled and re-enabled here in desired order.

FieldDescription
queueSort [Required]
PluginSet
QueueSort is a list of plugins that should be invoked when sorting pods in the scheduling queue.
preFilter [Required]
PluginSet
PreFilter is a list of plugins that should be invoked at “PreFilter” extension point of the scheduling framework.
filter [Required]
PluginSet
Filter is a list of plugins that should be invoked when filtering out nodes that cannot run the Pod.
postFilter [Required]
PluginSet
PostFilter is a list of plugins that are invoked after filtering phase, but only when no feasible nodes were found for the pod.
preScore [Required]
PluginSet
PreScore is a list of plugins that are invoked before scoring.
score [Required]
PluginSet
Score is a list of plugins that should be invoked when ranking nodes that have passed the filtering phase.
reserve [Required]
PluginSet
Reserve is a list of plugins invoked when reserving/unreserving resources after a node is assigned to run the pod.
permit [Required]
PluginSet
Permit is a list of plugins that control binding of a Pod. These plugins can prevent or delay binding of a Pod.
preBind [Required]
PluginSet
PreBind is a list of plugins that should be invoked before a pod is bound.
bind [Required]
PluginSet
Bind is a list of plugins that should be invoked at “Bind” extension point of the scheduling framework. The scheduler call these plugins in order. Scheduler skips the rest of these plugins as soon as one returns success.
postBind [Required]
PluginSet
PostBind is a list of plugins that should be invoked after a pod is successfully bound.
multiPoint [Required]
PluginSet
MultiPoint is a simplified config section to enable plugins for all valid extension points.

PodTopologySpreadConstraintsDefaulting

(Alias of string)

Appears in:

PodTopologySpreadConstraintsDefaulting defines how to set default constraints for the PodTopologySpread plugin.

RequestedToCapacityRatioParam

Appears in:

RequestedToCapacityRatioParam define RequestedToCapacityRatio parameters

FieldDescription
shape [Required]
[]UtilizationShapePoint
Shape is a list of points defining the scoring function shape.

ResourceSpec

Appears in:

ResourceSpec represents a single resource.

FieldDescription
name [Required]
string
Name of the resource.
weight [Required]
int64
Weight of the resource.

ScoringStrategy

Appears in:

ScoringStrategy define ScoringStrategyType for node resource plugin

FieldDescription
type [Required]
ScoringStrategyType
Type selects which strategy to run.
resources [Required]
[]ResourceSpec
Resources to consider when scoring. The default resource set includes “cpu” and “memory” with an equal weight. Allowed weights go from 1 to 100. Weight defaults to 1 if not specified or explicitly set to 0.
requestedToCapacityRatio [Required]
RequestedToCapacityRatioParam
Arguments specific to RequestedToCapacityRatio strategy.

ScoringStrategyType

(Alias of string)

Appears in:

ScoringStrategyType the type of scoring strategy used in NodeResourcesFit plugin.

UtilizationShapePoint

Appears in:

UtilizationShapePoint represents single point of priority function shape.

FieldDescription
utilization [Required]
int32
Utilization (x axis). Valid values are 0 to 100. Fully utilized node maps to 100.
score [Required]
int32
Score assigned to given utilization (y axis). Valid values are 0 to 10.

ClientConnectionConfiguration

Appears in:

ClientConnectionConfiguration contains details for constructing a client.

FieldDescription
kubeconfig [Required]
string
kubeconfig is the path to a KubeConfig file.
acceptContentTypes [Required]
string
acceptContentTypes defines the Accept header sent by clients when connecting to a server, overriding the default value of ‘application/json’. This field will control all connections to the server used by a particular client.
contentType [Required]
string
contentType is the content type used when sending data to the server from this client.
qps [Required]
float32
qps controls the number of queries per second allowed for this connection.
burst [Required]
int32
burst allows extra queries to accumulate when a client is exceeding its rate.

DebuggingConfiguration

Appears in:

DebuggingConfiguration holds configuration for Debugging related features.

FieldDescription
enableProfiling [Required]
bool
enableProfiling enables profiling via web interface host:port/debug/pprof/
enableContentionProfiling [Required]
bool
enableContentionProfiling enables lock contention profiling, if enableProfiling is true.

FormatOptions

Appears in:

FormatOptions contains options for the different logging formats.

FieldDescription
json [Required]
JSONOptions
[Experimental] JSON contains options for logging format “json”.

JSONOptions

Appears in:

JSONOptions contains options for logging format “json”.

FieldDescription
splitStream [Required]
bool
[Experimental] SplitStream redirects error messages to stderr while info messages go to stdout, with buffering. The default is to write both to stdout, without buffering.
infoBufferSize [Required]
k8s.io/apimachinery/pkg/api/resource.QuantityValue
[Experimental] InfoBufferSize sets the size of the info stream when using split streams. The default is zero, which disables buffering.

LeaderElectionConfiguration

Appears in:

LeaderElectionConfiguration defines the configuration of leader election clients for components that can run with leader election enabled.

FieldDescription
leaderElect [Required]
bool
leaderElect enables a leader election client to gain leadership before executing the main loop. Enable this when running replicated components for high availability.
leaseDuration [Required]
meta/v1.Duration
leaseDuration is the duration that non-leader candidates will wait after observing a leadership renewal until attempting to acquire leadership of a led but unrenewed leader slot. This is effectively the maximum duration that a leader can be stopped before it is replaced by another candidate. This is only applicable if leader election is enabled.
renewDeadline [Required]
meta/v1.Duration
renewDeadline is the interval between attempts by the acting master to renew a leadership slot before it stops leading. This must be less than or equal to the lease duration. This is only applicable if leader election is enabled.
retryPeriod [Required]
meta/v1.Duration
retryPeriod is the duration the clients should wait between attempting acquisition and renewal of a leadership. This is only applicable if leader election is enabled.
resourceLock [Required]
string
resourceLock indicates the resource object type that will be used to lock during leader election cycles.
resourceName [Required]
string
resourceName indicates the name of resource object that will be used to lock during leader election cycles.
resourceNamespace [Required]
string
resourceName indicates the namespace of resource object that will be used to lock during leader election cycles.

LoggingConfiguration

Appears in:

LoggingConfiguration contains logging options Refer Logs Options for more information.

FieldDescription
format [Required]
string
Format Flag specifies the structure of log messages. default value of format is text
flushFrequency [Required]
time.Duration
Maximum number of seconds between log flushes. Ignored if the selected logging backend writes log messages without buffering.
verbosity [Required]
uint32
Verbosity is the threshold that determines which log messages are logged. Default is zero which logs only the most important messages. Higher values enable additional messages. Error messages are always logged.
vmodule [Required]
VModuleConfiguration
VModule overrides the verbosity threshold for individual files. Only supported for “text” log format.
sanitization [Required]
bool
[Experimental] When enabled prevents logging of fields tagged as sensitive (passwords, keys, tokens). Runtime log sanitization may introduce significant computation overhead and therefore should not be enabled in production.`)
options [Required]
FormatOptions
[Experimental] Options holds additional parameters that are specific to the different logging formats. Only the options for the selected format get used, but all of them get validated.

VModuleConfiguration

(Alias of []k8s.io/component-base/config/v1alpha1.VModuleItem)

Appears in:

VModuleConfiguration is a collection of individual file names or patterns and the corresponding verbosity threshold.