Installing a cluster on OpenStack with customizations

In OKD version 4.7, you can install a customized cluster on Red Hat OpenStack Platform (RHOSP). To customize the installation, modify parameters in the install-config.yaml before you install the cluster.

Prerequisites

  • Review details about the OKD installation and update processes.

    • Verify that OKD 4.7 is compatible with your RHOSP version by using the “Supported platforms for OpenShift clusters” section. You can also compare platform support across different versions by viewing the OKD on RHOSP support matrix.
  • Verify that your network configuration does not rely on a provider network. Provider networks are not supported.

  • Have a storage service installed in RHOSP, like block storage (Cinder) or object storage (Swift). Object storage is the recommended storage technology for OKD registry cluster deployment. For more information, see Optimizing storage.

  • Have metadata service enabled in RHOSP

Resource guidelines for installing OKD on RHOSP

To support an OKD installation, your Red Hat OpenStack Platform (RHOSP) quota must meet the following requirements:

Table 1. Recommended resources for a default OKD cluster on RHOSP
ResourceValue

Floating IP addresses

3

Ports

15

Routers

1

Subnets

1

RAM

112 GB

vCPUs

28

Volume storage

275 GB

Instances

7

Security groups

3

Security group rules

60

A cluster might function with fewer than recommended resources, but its performance is not guaranteed.

If RHOSP object storage (Swift) is available and operated by a user account with the swiftoperator role, it is used as the default backend for the OKD image registry. In this case, the volume storage requirement is 175 GB. Swift space requirements vary depending on the size of the image registry.

By default, your security group and security group rule quotas might be low. If you encounter problems, run openstack quota set —secgroups 3 —secgroup-rules 60 <project> as an administrator to increase them.

An OKD deployment comprises control plane machines, compute machines, and a bootstrap machine.

Control plane and compute machines

By default, the OKD installation process stands up three control plane and three compute machines.

Each machine requires:

  • An instance from the RHOSP quota

  • A port from the RHOSP quota

  • A flavor with at least 16 GB memory, 4 vCPUs, and 25 GB storage space

Compute machines host the applications that you run on OKD; aim to run as many as you can.

Bootstrap machine

During installation, a bootstrap machine is temporarily provisioned to stand up the control plane. After the production control plane is ready, the bootstrap machine is deprovisioned.

The bootstrap machine requires:

  • An instance from the RHOSP quota

  • A port from the RHOSP quota

  • A flavor with at least 16 GB memory, 4 vCPUs, and 25 GB storage space

Enabling Swift on RHOSP

Swift is operated by a user account with the swiftoperator role. Add the role to an account before you run the installation program.

If the Red Hat OpenStack Platform (RHOSP) object storage service, commonly known as Swift, is available, OKD uses it as the image registry storage. If it is unavailable, the installation program relies on the RHOSP block storage service, commonly known as Cinder.

If Swift is present and you want to use it, you must enable access to it. If it is not present, or if you do not want to use it, skip this section.

Prerequisites

  • You have a RHOSP administrator account on the target environment.

  • The Swift service is installed.

  • On Ceph RGW, the account in url option is enabled.

Procedure

To enable Swift on RHOSP:

  1. As an administrator in the RHOSP CLI, add the swiftoperator role to the account that will access Swift:

    1. $ openstack role add --user <user> --project <project> swiftoperator

Your RHOSP deployment can now use Swift for the image registry.

Verifying external network access

The OKD installation process requires external network access. You must provide an external network value to it, or deployment fails. Before you begin the process, verify that a network with the external router type exists in Red Hat OpenStack Platform (RHOSP).

Prerequisites

Procedure

  1. Using the RHOSP CLI, verify the name and ID of the ‘External’ network:

    1. $ openstack network list --long -c ID -c Name -c "Router Type"

    Example output

    1. +--------------------------------------+----------------+-------------+
    2. | ID | Name | Router Type |
    3. +--------------------------------------+----------------+-------------+
    4. | 148a8023-62a7-4672-b018-003462f8d7dc | public_network | External |
    5. +--------------------------------------+----------------+-------------+

A network with an external router type appears in the network list. If at least one does not, see Creating a default floating IP network and Creating a default provider network.

If the external network’s CIDR range overlaps one of the default network ranges, you must change the matching network ranges in the install-config.yaml file before you start the installation process.

The default network ranges are:

NetworkRange

machineNetwork

10.0.0.0/16

serviceNetwork

172.30.0.0/16

clusterNetwork

10.128.0.0/14

If the installation program finds multiple networks with the same name, it sets one of them at random. To avoid this behavior, create unique names for resources in RHOSP.

If the Neutron trunk service plug-in is enabled, a trunk port is created by default. For more information, see Neutron trunk port.

Defining parameters for the installation program

The OKD installation program relies on a file that is called clouds.yaml. The file describes Red Hat OpenStack Platform (RHOSP) configuration parameters, including the project name, log in information, and authorization service URLs.

Procedure

  1. Create the clouds.yaml file:

    • If your RHOSP distribution includes the Horizon web UI, generate a clouds.yaml file in it.

      Remember to add a password to the auth field. You can also keep secrets in a separate file from clouds.yaml.

    • If your RHOSP distribution does not include the Horizon web UI, or you do not want to use Horizon, create the file yourself. For detailed information about clouds.yaml, see Config files in the RHOSP documentation.

      1. clouds:
      2. shiftstack:
      3. auth:
      4. auth_url: http://10.10.14.42:5000/v3
      5. project_name: shiftstack
      6. username: shiftstack_user
      7. password: XXX
      8. user_domain_name: Default
      9. project_domain_name: Default
      10. dev-env:
      11. region_name: RegionOne
      12. auth:
      13. username: 'devuser'
      14. password: XXX
      15. project_name: 'devonly'
      16. auth_url: 'https://10.10.14.22:5001/v2.0'
  2. If your RHOSP installation uses self-signed certificate authority (CA) certificates for endpoint authentication:

    1. Copy the certificate authority file to your machine.

    2. Add the cacerts key to the clouds.yaml file. The value must be an absolute, non-root-accessible path to the CA certificate:

      1. clouds:
      2. shiftstack:
      3. ...
      4. cacert: "/etc/pki/ca-trust/source/anchors/ca.crt.pem"

      After you run the installer with a custom CA certificate, you can update the certificate by editing the value of the ca-cert.pem key in the cloud-provider-config keymap. On a command line, run:

      1. $ oc edit configmap -n openshift-config cloud-provider-config
  3. Place the clouds.yaml file in one of the following locations:

    1. The value of the OS_CLIENT_CONFIG_FILE environment variable

    2. The current directory

    3. A Unix-specific user configuration directory, for example ~/.config/openstack/clouds.yaml

    4. A Unix-specific site configuration directory, for example /etc/openstack/clouds.yaml

      The installation program searches for clouds.yaml in that order.

Obtaining the installation program

Before you install OKD, download the installation file on a local computer.

Prerequisites

  • You have a computer that runs Linux or macOS, with 500 MB of local disk space

Procedure

  1. Download installer from https://github.com/openshift/okd/releases

    The installation program creates several files on the computer that you use to install your cluster. You must keep the installation program and the files that the installation program creates after you finish installing the cluster. Both files are required to delete the cluster.

    Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. To remove your cluster, complete the OKD uninstallation procedures for your specific cloud provider.

  2. Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:

    1. $ tar xvf openshift-install-linux.tar.gz
  3. From the Pull Secret page on the Red Hat OpenShift Cluster Manager site, download your installation pull secret as a .txt file. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OKD components.

    Using a pull secret from the Red Hat OpenShift Cluster Manager site is not required. You can use a pull secret for another private registry. Or, if you do not need the cluster to pull images from a private registry, you can use {"auths":{"fake":{"auth":"aWQ6cGFzcwo="}}} as the pull secret when prompted during the installation.

    If you do not use the pull secret from the Red Hat OpenShift Cluster Manager site:

    • Red Hat Operators are not available.

    • The Telemetry and Insights operators do not send data to Red Hat.

    • Content from the Red Hat Container Catalog registry, such as image streams and Operators, are not available.

Creating the installation configuration file

You can customize the OKD cluster you install on Red Hat OpenStack Platform (RHOSP).

Prerequisites

  • Obtain the OKD installation program and the pull secret for your cluster.

  • Obtain service principal permissions at the subscription level.

Procedure

  1. Create the install-config.yaml file.

    1. Change to the directory that contains the installation program and run the following command:

      1. $ ./openshift-install create install-config --dir=<installation_directory> (1)
      1For <installation_directory>, specify the directory name to store the files that the installation program creates.

      Specify an empty directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OKD version.

    2. At the prompts, provide the configuration details for your cloud:

      1. Optional: Select an SSH key to use to access your cluster machines.

        For production OKD clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

      2. Select openstack as the platform to target.

      3. Specify the Red Hat OpenStack Platform (RHOSP) external network name to use for installing the cluster.

      4. Specify the floating IP address to use for external access to the OpenShift API.

      5. Specify a RHOSP flavor with at least 16 GB RAM to use for control plane and compute nodes.

      6. Select the base domain to deploy the cluster to. All DNS records will be sub-domains of this base and will also include the cluster name.

      7. Enter a name for your cluster. The name must be 14 or fewer characters long.

      8. Paste the pull secret that you obtained from the Pull Secret page on the Red Hat OpenShift Cluster Manager site. This field is optional.

  1. Modify the install-config.yaml file. You can find more information about the available parameters in the “Installation configuration parameters” section.

  2. Back up the install-config.yaml file so that you can use it to install multiple clusters.

    The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

Configuring the cluster-wide proxy during installation

Production environments can deny direct access to the Internet and instead have an HTTP or HTTPS proxy available. You can configure a new OKD cluster to use a proxy by configuring the proxy settings in the install-config.yaml file.

Prerequisites

  • You have an existing install-config.yaml file.

  • You reviewed the sites that your cluster requires access to and determined whether any of them need to bypass the proxy. By default, all cluster egress traffic is proxied, including calls to hosting cloud provider APIs. You added sites to the Proxy object’s spec.noProxy field to bypass the proxy if necessary.

    The Proxy object status.noProxy field is populated with the values of the networking.machineNetwork[].cidr, networking.clusterNetwork[].cidr, and networking.serviceNetwork[] fields from your installation configuration.

    For installations on Amazon Web Services (AWS), Google Cloud Platform (GCP), Microsoft Azure, and Red Hat OpenStack Platform (RHOSP), the Proxy object status.noProxy field is also populated with the instance metadata endpoint (169.254.169.254).

  • If your cluster is on AWS, you added the ec2.<region>.amazonaws.com, elasticloadbalancing.<region>.amazonaws.com, and s3.<region>.amazonaws.com endpoints to your VPC endpoint. These endpoints are required to complete requests from the nodes to the AWS EC2 API. Because the proxy works on the container level, not the node level, you must route these requests to the AWS EC2 API through the AWS private network. Adding the public IP address of the EC2 API to your allowlist in your proxy server is not sufficient.

Procedure

  1. Edit your install-config.yaml file and add the proxy settings. For example:

    1. apiVersion: v1
    2. baseDomain: my.domain.com
    3. proxy:
    4. httpProxy: http://<username>:<pswd>@<ip>:<port> (1)
    5. httpsProxy: https://<username>:<pswd>@<ip>:<port> (2)
    6. noProxy: example.com (3)
    7. additionalTrustBundle: | (4)
    8. -----BEGIN CERTIFICATE-----
    9. <MY_TRUSTED_CA_CERT>
    10. -----END CERTIFICATE-----
    11. ...
    1A proxy URL to use for creating HTTP connections outside the cluster. The URL scheme must be http. If you use an MITM transparent proxy network that does not require additional proxy configuration but requires additional CAs, you must not specify an httpProxy value.
    2A proxy URL to use for creating HTTPS connections outside the cluster. If you use an MITM transparent proxy network that does not require additional proxy configuration but requires additional CAs, you must not specify an httpsProxy value.
    3A comma-separated list of destination domain names, domains, IP addresses, or other network CIDRs to exclude proxying. Preface a domain with . to match subdomains only. For example, .y.com matches x.y.com, but not y.com. Use * to bypass proxy for all destinations.
    4If provided, the installation program generates a config map that is named user-ca-bundle in the openshift-config namespace that contains one or more additional CA certificates that are required for proxying HTTPS connections. The Cluster Network Operator then creates a trusted-ca-bundle config map that merges these contents with the Fedora CoreOS (FCOS) trust bundle, and this config map is referenced in the Proxy object’s trustedCA field. The additionalTrustBundle field is required unless the proxy’s identity certificate is signed by an authority from the FCOS trust bundle. If you use an MITM transparent proxy network that does not require additional proxy configuration but requires additional CAs, you must provide the MITM CA certificate.

    The installation program does not support the proxy readinessEndpoints field.

  2. Save the file and reference it when installing OKD.

The installation program creates a cluster-wide proxy that is named cluster that uses the proxy settings in the provided install-config.yaml file. If no proxy settings are provided, a cluster Proxy object is still created, but it will have a nil spec.

Only the Proxy object named cluster is supported, and no additional proxies can be created.

Installation configuration parameters

Before you deploy an OKD cluster, you provide parameter values to describe your account on the cloud platform that hosts your cluster and optionally customize your cluster’s platform. When you create the install-config.yaml installation configuration file, you provide values for the required parameters through the command line. If you customize your cluster, you can modify the install-config.yaml file to provide more details about the platform.

After installation, you cannot modify these parameters in the install-config.yaml file.

The openshift-install command does not validate field names for parameters. If an incorrect name is specified, the related file or object is not created, and no error is reported. Ensure that the field names for any parameters that are specified are correct.

Required configuration parameters

Required installation configuration parameters are described in the following table:

Table 2. Required parameters
ParameterDescriptionValues

apiVersion

The API version for the install-config.yaml content. The current version is v1. The installer may also support older API versions.

String

baseDomain

The base domain of your cloud provider. The base domain is used to create routes to your OKD cluster components. The full DNS name for your cluster is a combination of the baseDomain and metadata.name parameter values that uses the <metadata.name>.<baseDomain> format.

A fully-qualified domain or subdomain name, such as example.com.

metadata

Kubernetes resource ObjectMeta, from which only the name parameter is consumed.

Object

metadata.name

The name of the cluster. DNS records for the cluster are all subdomains of {{.metadata.name}}.{{.baseDomain}}.

String of lowercase letters, hyphens (-), and periods (.), such as dev. The string must be 14 characters or fewer long.

platform

The configuration for the specific platform upon which to perform the installation: aws, baremetal, azure, openstack, ovirt, vsphere. For additional information about platform.<platform> parameters, consult the table for your specific platform that follows.

Object

Network configuration parameters

You can customize your installation configuration based on the requirements of your existing network infrastructure. For example, you can expand the IP address block for the cluster network or provide different IP address blocks than the defaults.

Only IPv4 addresses are supported.

Table 3. Network parameters
ParameterDescriptionValues

networking

The configuration for the cluster network.

Object

You cannot modify parameters specified by the networking object after installation.

networking.networkType

The cluster network provider Container Network Interface (CNI) plug-in to install.

Either OpenShiftSDN or OVNKubernetes. The default value is OVNKubernetes.

networking.clusterNetwork

The IP address blocks for pods.

The default value is 10.128.0.0/14 with a host prefix of /23.

If you specify multiple IP address blocks, the blocks must not overlap.

An array of objects. For example:

  1. networking:
  2. clusterNetwork:
  3. - cidr: 10.128.0.0/14
  4. hostPrefix: 23

networking.clusterNetwork.cidr

Required if you use networking.clusterNetwork. An IP address block.

An IPv4 network.

An IP address block in Classless Inter-Domain Routing (CIDR) notation. The prefix length for an IPv4 block is between 0 and 32.

networking.clusterNetwork.hostPrefix

The subnet prefix length to assign to each individual node. For example, if hostPrefix is set to 23 then each node is assigned a /23 subnet out of the given cidr. A hostPrefix value of 23 provides 510 (2^(32 - 23) - 2) pod IP addresses.

A subnet prefix.

The default value is 23.

networking.serviceNetwork

The IP address block for services. The default value is 172.30.0.0/16.

The OpenShift SDN and OVN-Kubernetes network providers support only a single IP address block for the service network.

An array with an IP address block in CIDR format. For example:

  1. networking:
  2. serviceNetwork:
  3. - 172.30.0.0/16

networking.machineNetwork

The IP address blocks for machines.

If you specify multiple IP address blocks, the blocks must not overlap.

An array of objects. For example:

  1. networking:
  2. machineNetwork:
  3. - cidr: 10.0.0.0/16

networking.machineNetwork.cidr

Required if you use networking.machineNetwork. An IP address block. The default value is 10.0.0.0/16 for all platforms other than libvirt. For libvirt, the default value is 192.168.126.0/24.

An IP network block in CIDR notation.

For example, 10.0.0.0/16.

Set the networking.machineNetwork to match the CIDR that the preferred NIC resides in.

Optional configuration parameters

Optional installation configuration parameters are described in the following table:

Table 4. Optional parameters
ParameterDescriptionValues

additionalTrustBundle

A PEM-encoded X.509 certificate bundle that is added to the nodes’ trusted certificate store. This trust bundle may also be used when a proxy has been configured.

String

compute

The configuration for the machines that comprise the compute nodes.

Array of MachinePool objects. For details, see the following “Machine-pool” table.

compute.architecture

Determines the instruction set architecture of the machines in the pool. Currently, heteregeneous clusters are not supported, so all pools must specify the same architecture. Valid values are amd64 (the default).

String

compute.hyperthreading

Whether to enable or disable simultaneous multithreading, or hyperthreading, on compute machines. By default, simultaneous multithreading is enabled to increase the performance of your machines’ cores.

If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.

Enabled or Disabled

compute.name

Required if you use compute. The name of the machine pool.

worker

compute.platform

Required if you use compute. Use this parameter to specify the cloud provider to host the worker machines. This parameter value must match the controlPlane.platform parameter value.

aws, azure, gcp, openstack, ovirt, vsphere, or {}

compute.replicas

The number of compute machines, which are also known as worker machines, to provision.

A positive integer greater than or equal to 2. The default value is 3.

controlPlane

The configuration for the machines that comprise the control plane.

Array of MachinePool objects. For details, see the following “Machine-pool” table.

controlPlane.architecture

Determines the instruction set architecture of the machines in the pool. Currently, heterogeneous clusters are not supported, so all pools must specify the same architecture. Valid values are amd64 (the default).

String

controlPlane.hyperthreading

Whether to enable or disable simultaneous multithreading, or hyperthreading, on control plane machines. By default, simultaneous multithreading is enabled to increase the performance of your machines’ cores.

If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.

Enabled or Disabled

controlPlane.name

Required if you use controlPlane. The name of the machine pool.

master

controlPlane.platform

Required if you use controlPlane. Use this parameter to specify the cloud provider that hosts the control plane machines. This parameter value must match the compute.platform parameter value.

aws, azure, gcp, openstack, ovirt, vsphere, or {}

controlPlane.replicas

The number of control plane machines to provision.

The only supported value is 3, which is the default value.

credentialsMode

The Cloud Credential Operator (CCO) mode. If no mode is specified, the CCO dynamically tries to determine the capabilities of the provided credentials, with a preference for mint mode on the platforms where multiple modes are supported.

Not all CCO modes are supported for all cloud providers. For more information on CCO modes, see the Cloud Credential Operator entry in the Red Hat Operators reference content.

Mint, Passthrough, Manual, or an empty string (“”).

imageContentSources

Sources and repositories for the release-image content.

Array of objects. Includes a source and, optionally, mirrors, as described in the following rows of this table.

imageContentSources.source

Required if you use imageContentSources. Specify the repository that users refer to, for example, in image pull specifications.

String

imageContentSources.mirrors

Specify one or more repositories that may also contain the same images.

Array of strings

publish

How to publish or expose the user-facing endpoints of your cluster, such as the Kubernetes API, OpenShift routes.

Internal or External. The default value is External.

Setting this field to Internal is not supported on non-cloud platforms.

If the value of the field is set to Internal, the cluster will become non-functional. For more information, refer to BZ#1953035.

sshKey

The SSH key or keys to authenticate access your cluster machines.

For production OKD clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

One or more keys. For example:

  1. sshKey:
  2. <key1>
  3. <key2>
  4. <key3>

Additional Red Hat OpenStack Platform (RHOSP) configuration parameters

Additional RHOSP configuration parameters are described in the following table:

Table 5. Additional RHOSP parameters
ParameterDescriptionValues

compute.platform.openstack.rootVolume.size

For compute machines, the size in gigabytes of the root volume. If you do not set this value, machines use ephemeral storage.

Integer, for example 30.

compute.platform.openstack.rootVolume.type

For compute machines, the root volume’s type.

String, for example performance.

controlPlane.platform.openstack.rootVolume.size

For control plane machines, the size in gigabytes of the root volume. If you do not set this value, machines use ephemeral storage.

Integer, for example 30.

controlPlane.platform.openstack.rootVolume.type

For control plane machines, the root volume’s type.

String, for example performance.

platform.openstack.cloud

The name of the RHOSP cloud to use from the list of clouds in the clouds.yaml file.

String, for example MyCloud.

platform.openstack.externalNetwork

The RHOSP external network name to be used for installation.

String, for example external.

platform.openstack.computeFlavor

The RHOSP flavor to use for control plane and compute machines.

This property is deprecated. To use a flavor as the default for all machine pools, add it as the value of the type key in the platform.openstack.defaultMachinePlatform property. You can also set a flavor value for each machine pool individually.

String, for example m1.xlarge.

Optional RHOSP configuration parameters

Optional RHOSP configuration parameters are described in the following table:

Table 6. Optional RHOSP parameters
ParameterDescriptionValues

compute.platform.openstack.additionalNetworkIDs

Additional networks that are associated with compute machines. Allowed address pairs are not created for additional networks.

A list of one or more UUIDs as strings. For example, fa806b2f-ac49-4bce-b9db-124bc64209bf.

compute.platform.openstack.additionalSecurityGroupIDs

Additional security groups that are associated with compute machines.

A list of one or more UUIDs as strings. For example, 7ee219f3-d2e9-48a1-96c2-e7429f1b0da7.

compute.platform.openstack.zones

RHOSP Compute (Nova) availability zones (AZs) to install machines on. If this parameter is not set, the installer relies on the default settings for Nova that the RHOSP administrator configured.

On clusters that use Kuryr, RHOSP Octavia does not support availability zones. Load balancers and, if you are using the Amphora provider driver, OKD services that rely on Amphora VMs, are not created according to the value of this property.

A list of strings. For example, [“zone-1”, “zone-2”].

controlPlane.platform.openstack.additionalNetworkIDs

Additional networks that are associated with control plane machines. Allowed address pairs are not created for additional networks.

A list of one or more UUIDs as strings. For example, fa806b2f-ac49-4bce-b9db-124bc64209bf.

controlPlane.platform.openstack.additionalSecurityGroupIDs

Additional security groups that are associated with control plane machines.

A list of one or more UUIDs as strings. For example, 7ee219f3-d2e9-48a1-96c2-e7429f1b0da7.

controlPlane.platform.openstack.zones

RHOSP Compute (Nova) availability zones (AZs) to install machines on. If this parameter is not set, the installer relies on the default settings for Nova that the RHOSP administrator configured.

On clusters that use Kuryr, RHOSP Octavia does not support availability zones. Load balancers and, if you are using the Amphora provider driver, OKD services that rely on Amphora VMs, are not created according to the value of this property.

A list of strings. For example, [“zone-1”, “zone-2”].

platform.openstack.clusterOSImage

The location from which the installer downloads the FCOS image.

You must set this parameter to perform an installation in a restricted network.

An HTTP or HTTPS URL, optionally with an SHA-256 checksum.

platform.openstack.clusterOSImageProperties

Properties to add to the installer-uploaded ClusterOSImage in Glance. This property is ignored if platform.openstack.clusterOSImage is set to an existing Glance image.

You can use this property to exceed the default persistent volume (PV) limit for RHOSP of 26 PVs per node. To exceed the limit, set the hw_scsi_model property value to virtio-scsi and the hw_disk_bus value to scsi.

You can also use this property to enable the QEMU guest agent by including the hw_qemu_guest_agent property with a value of yes.

A list of key-value string pairs. For example, [“hw_scsi_model”: “virtio-scsi”, “hw_disk_bus”: “scsi”].

platform.openstack.defaultMachinePlatform

The default machine pool platform configuration.

  1. {
  2. type”: ml.large”,
  3. rootVolume”: {
  4. size”: 30,
  5. type”: performance
  6. }
  7. }

platform.openstack.ingressFloatingIP

An existing floating IP address to associate with the Ingress port. To use this property, you must also define the platform.openstack.externalNetwork property.

An IP address, for example 128.0.0.1.

platform.openstack.apiFloatingIP

An existing floating IP address to associate with the API load balancer. To use this property, you must also define the platform.openstack.externalNetwork property.

An IP address, for example 128.0.0.1.

platform.openstack.externalDNS

IP addresses for external DNS servers that cluster instances use for DNS resolution.

A list of IP addresses as strings. For example, [“8.8.8.8”, “192.168.1.12”].

platform.openstack.machinesSubnet

The UUID of a RHOSP subnet that the cluster’s nodes use. Nodes and virtual IP (VIP) ports are created on this subnet.

The first item in networking.machineNetwork must match the value of machinesSubnet.

If you deploy to a custom subnet, you cannot specify an external DNS server to the OKD installer. Instead, add DNS to the subnet in RHOSP.

A UUID as a string. For example, fa806b2f-ac49-4bce-b9db-124bc64209bf.

Custom subnets in RHOSP deployments

Optionally, you can deploy a cluster on a Red Hat OpenStack Platform (RHOSP) subnet of your choice. The subnet’s GUID is passed as the value of platform.openstack.machinesSubnet in the install-config.yaml file.

This subnet is used as the cluster’s primary subnet. By default, nodes and ports are created on it. You can create nodes and ports on a different RHOSP subnet by setting the value of the platform.openstack.machinesSubnet property to the subnet’s UUID.

Before you run the OKD installer with a custom subnet, verify that your configuration meets the following requirements:

  • The subnet that is used by platform.openstack.machinesSubnet has DHCP enabled.

  • The CIDR of platform.openstack.machinesSubnet matches the CIDR of networking.machineNetwork.

  • The installation program user has permission to create ports on this network, including ports with fixed IP addresses.

Clusters that use custom subnets have the following limitations:

  • If you plan to install a cluster that uses floating IP addresses, the platform.openstack.machinesSubnet subnet must be attached to a router that is connected to the externalNetwork network.

  • If the platform.openstack.machinesSubnet value is set in the install-config.yaml file, the installation program does not create a private network or subnet for your RHOSP machines.

  • You cannot use the platform.openstack.externalDNS property at the same time as a custom subnet. To add DNS to a cluster that uses a custom subnet, configure DNS on the RHOSP network.

By default, the API VIP takes x.x.x.5 and the Ingress VIP takes x.x.x.7 from your network’s CIDR block. To override these default values, set values for platform.openstack.apiVIP and platform.openstack.ingressVIP that are outside of the DHCP allocation pool.

Deploying a cluster with bare metal machines

If you want your cluster to use bare metal machines, modify the install-config.yaml file. Your cluster can have both control plane and compute machines running on bare metal, or just compute machines.

Bare-metal compute machines are not supported on clusters that use Kuryr.

Be sure that your install-config.yaml file reflects whether the RHOSP network that you use for bare metal workers supports floating IP addresses or not.

Prerequisites

  • The RHOSP Bare Metal service (Ironic) is enabled and accessible via the RHOSP Compute API.

  • Bare metal is available as a RHOSP flavor.

  • The RHOSP network supports both VM and bare metal server attachment.

  • Your network configuration does not rely on a provider network. Provider networks are not supported.

  • If you want to deploy the machines on a pre-existing network, a RHOSP subnet is provisioned.

  • If you want to deploy the machines on an installer-provisioned network, the RHOSP Bare Metal service (Ironic) is able to listen for and interact with Preboot eXecution Environment (PXE) boot machines that run on tenant networks.

  • You created an install-config.yaml file as part of the OKD installation process.

Procedure

  1. In the install-config.yaml file, edit the flavors for machines:

    1. If you want to use bare-metal control plane machines, change the value of controlPlane.platform.openstack.type to a bare metal flavor.

    2. Change the value of compute.platform.openstack.type to a bare metal flavor.

    3. If you want to deploy your machines on a pre-existing network, change the value of platform.openstack.machinesSubnet to the RHOSP subnet UUID of the network. Control plane and compute machines must use the same subnet.

      An example bare metal install-config.yaml file

      1. controlPlane:
      2. platform:
      3. openstack:
      4. type: <bare_metal_control_plane_flavor> (1)
      5. ...
      6. compute:
      7. - architecture: amd64
      8. hyperthreading: Enabled
      9. name: worker
      10. platform:
      11. openstack:
      12. type: <bare_metal_compute_flavor> (2)
      13. replicas: 3
      14. ...
      15. platform:
      16. openstack:
      17. machinesSubnet: <subnet_UUID> (3)
      18. ...
      1If you want to have bare-metal control plane machines, change this value to a bare metal flavor.
      2Change this value to a bare metal flavor to use for compute machines.
      3If you want to use a pre-existing network, change this value to the UUID of the RHOSP subnet.

Use the updated install-config.yaml file to complete the installation process. The compute machines that are created during deployment use the flavor that you added to the file.

The installer may time out while waiting for bare metal machines to boot.

If the installer times out, restart and then complete the deployment by using the wait-for command of the installer. For example:

  1. ./openshift-install wait-for install-complete log-level debug

Sample customized install-config.yaml file for RHOSP

This sample install-config.yaml demonstrates all of the possible Red Hat OpenStack Platform (RHOSP) customization options.

This sample file is provided for reference only. You must obtain your install-config.yaml file by using the installation program.
  1. apiVersion: v1
  2. baseDomain: example.com
  3. controlPlane:
  4. name: master
  5. platform: {}
  6. replicas: 3
  7. compute:
  8. - name: worker
  9. platform:
  10. openstack:
  11. type: ml.large
  12. replicas: 3
  13. metadata:
  14. name: example
  15. networking:
  16. clusterNetwork:
  17. - cidr: 10.128.0.0/14
  18. hostPrefix: 23
  19. machineNetwork:
  20. - cidr: 10.0.0.0/16
  21. serviceNetwork:
  22. - 172.30.0.0/16
  23. networkType: OVNKubernetes
  24. platform:
  25. openstack:
  26. cloud: mycloud
  27. externalNetwork: external
  28. computeFlavor: m1.xlarge
  29. apiFloatingIP: 128.0.0.1
  30. pullSecret: '{"auths": ...}'
  31. sshKey: ssh-ed25519 AAAA...

Generating an SSH private key and adding it to the agent

If you want to perform installation debugging or disaster recovery on your cluster, you must provide an SSH key to both your ssh-agent and the installation program. You can use this key to access the bootstrap machine in a public cluster to troubleshoot installation issues.

In a production environment, you require disaster recovery and debugging.

You can use this key to SSH into the master nodes as the user core. When you deploy the cluster, the key is added to the core user’s ~/.ssh/authorized_keys list.

On clusters running Fedora CoreOS (FCOS), the SSH keys specified in the Ignition config files are written to the /home/core/.ssh/authorized_keys.d/core file. However, the Machine Config Operator manages SSH keys in the /home/core/.ssh/authorized_keys file and configures sshd to ignore the /home/core/.ssh/authorized_keys.d/core file. As a result, newly provisioned OKD nodes are not accessible using SSH until the Machine Config Operator reconciles the machine configs with the authorized_keys file. After you can access the nodes using SSH, you can delete the /home/core/.ssh/authorized_keys.d/core file.

Procedure

  1. If you do not have an SSH key that is configured for password-less authentication on your computer, create one. For example, on a computer that uses a Linux operating system, run the following command:

    1. $ ssh-keygen -t ed25519 -N '' \
    2. -f <path>/<file_name> (1)
    1Specify the path and file name, such as ~/.ssh/id_rsa, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.

    Running this command generates an SSH key that does not require a password in the location that you specified.

    If you plan to install an OKD cluster that uses FIPS Validated / Modules in Process cryptographic libraries on the x86_64 architecture, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.

  2. Start the ssh-agent process as a background task:

    1. $ eval "$(ssh-agent -s)"

    Example output

    1. Agent pid 31874

    If your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.

  3. Add your SSH private key to the ssh-agent:

    1. $ ssh-add <path>/<file_name> (1)

    Example output

    1. Identity added: /home/<you>/<path>/<file_name> (<computer_name>)
    1Specify the path and file name for your SSH private key, such as ~/.ssh/id_rsa

Next steps

  • When you install OKD, provide the SSH public key to the installation program.

Enabling access to the environment

At deployment, all OKD machines are created in a Red Hat OpenStack Platform (RHOSP)-tenant network. Therefore, they are not accessible directly in most RHOSP deployments.

You can configure OKD API and application access by using floating IP addresses (FIPs) during installation. You can also complete an installation without configuring FIPs, but the installer will not configure a way to reach the API or applications externally.

Enabling access with floating IP addresses

Create floating IP (FIP) addresses for external access to the OKD API and cluster applications.

Procedure

  1. Using the Red Hat OpenStack Platform (RHOSP) CLI, create the API FIP:

    1. $ openstack floating ip create --description "API <cluster_name>.<base_domain>" <external_network>
  2. Using the Red Hat OpenStack Platform (RHOSP) CLI, create the apps, or Ingress, FIP:

    1. $ openstack floating ip create --description "Ingress <cluster_name>.<base_domain>" <external_network>
  3. Add records that follow these patterns to your DNS server for the API and Ingress FIPs:

    1. api.<cluster_name>.<base_domain>. IN A <API_FIP>
    2. *.apps.<cluster_name>.<base_domain>. IN A <apps_FIP>

    If you do not control the DNS server, you can add the record to your /etc/hosts file. This action makes the API accessible to only you, which is not suitable for production deployment but does allow installation for development and testing.

  4. Add the FIPs to the install-config.yaml file as the values of the following parameters:

    • platform.openstack.ingressFloatingIP

    • platform.openstack.apiFloatingIP

If you use these values, you must also enter an external network as the value of the platform.openstack.externalNetwork parameter in the install-config.yaml file.

You can make OKD resources available outside of the cluster by assigning a floating IP address and updating your firewall configuration.

Completing installation without floating IP addresses

You can install OKD on Red Hat OpenStack Platform (RHOSP) without providing floating IP addresses.

In the install-config.yaml file, do not define the following parameters:

  • platform.openstack.ingressFloatingIP

  • platform.openstack.apiFloatingIP

If you cannot provide an external network, you can also leave platform.openstack.externalNetwork blank. If you do not provide a value for platform.openstack.externalNetwork, a router is not created for you, and, without additional action, the installer will fail to retrieve an image from Glance. You must configure external connectivity on your own.

If you run the installer from a system that cannot reach the cluster API due to a lack of floating IP addresses or name resolution, installation fails. To prevent installation failure in these cases, you can use a proxy network or run the installer from a system that is on the same network as your machines.

You can enable name resolution by creating DNS records for the API and Ingress ports. For example:

  1. api.<cluster_name>.<base_domain>. IN A <api_port_IP>
  2. *.apps.<cluster_name>.<base_domain>. IN A <ingress_port_IP>

If you do not control the DNS server, you can add the record to your /etc/hosts file. This action makes the API accessible to only you, which is not suitable for production deployment but does allow installation for development and testing.

Deploying the cluster

You can install OKD on a compatible cloud platform.

You can run the create cluster command of the installation program only once, during initial installation.

Prerequisites

  • Obtain the OKD installation program and the pull secret for your cluster.

Procedure

  1. Change to the directory that contains the installation program and initialize the cluster deployment:

    1. $ ./openshift-install create cluster --dir=<installation_directory> \ (1)
    2. --log-level=info (2)
    1For <installation_directory>, specify the location of your customized ./install-config.yaml file.
    2To view different installation details, specify warn, debug, or error instead of info.

    If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

    When the cluster deployment completes, directions for accessing your cluster, including a link to its web console and credentials for the kubeadmin user, display in your terminal.

    Example output

    1. ...
    2. INFO Install complete!
    3. INFO To access the cluster as the system:admin user when using 'oc', run 'export KUBECONFIG=/home/myuser/install_dir/auth/kubeconfig'
    4. INFO Access the OpenShift web-console here: https://console-openshift-console.apps.mycluster.example.com
    5. INFO Login to the console with user: "kubeadmin", and password: "4vYBz-Ee6gm-ymBZj-Wt5AL"
    6. INFO Time elapsed: 36m22s

    The cluster access and credential information also outputs to <installation_directory>/.openshift_install.log when an installation succeeds.

    The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.

    You must not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

Verifying cluster status

You can verify your OKD cluster’s status during or after installation.

Procedure

  1. In the cluster environment, export the administrator’s kubeconfig file:

    1. $ export KUBECONFIG=<installation_directory>/auth/kubeconfig (1)
    1For <installation_directory>, specify the path to the directory that you stored the installation files in.

    The kubeconfig file contains information about the cluster that is used by the CLI to connect a client to the correct cluster and API server.

  2. View the control plane and compute machines created after a deployment:

    1. $ oc get nodes
  3. View your cluster’s version:

    1. $ oc get clusterversion
  4. View your Operators’ status:

    1. $ oc get clusteroperator
  5. View all running pods in the cluster:

    1. $ oc get pods -A

Logging in to the cluster by using the CLI

You can log in to your cluster as a default system user by exporting the cluster kubeconfig file. The kubeconfig file contains information about the cluster that is used by the CLI to connect a client to the correct cluster and API server. The file is specific to a cluster and is created during OKD installation.

Prerequisites

  • You deployed an OKD cluster.

  • You installed the oc CLI.

Procedure

  1. Export the kubeadmin credentials:

    1. $ export KUBECONFIG=<installation_directory>/auth/kubeconfig (1)
    1For <installation_directory>, specify the path to the directory that you stored the installation files in.
  2. Verify you can run oc commands successfully using the exported configuration:

    1. $ oc whoami

    Example output

    1. system:admin

Additional resources

Additional resources

Next steps