Aggregation

Table of Contents

Introduction

An aggregation function operates on multiple values of the specified column of your SELECT. For example, SELECT avg(temperature) will return the average value of the temperature column across all rows being considered.

You can apply aggregation functions to the results of a whole query, or to each of the rows produced by a GROUP BY query.

So for example, GROUP BY type, location will produce one result row for every distinct combination of type and location. In this instance, avg(temperature) would return the average temperature for every grouped row.

If you’re not using GROUP BY, an aggregation function will collapse your query result into one row, with one returned aggregation value.

For a tabulated summary of aggregation functions, see Data Aggregation.

count

count(*)

This aggregation function simply returns the number of rows that match the query.

count(columName) is also possible, but currently only works on a primary key column. The semantics are the same.

The return value is always of type long.

  1. cr> select count(*) from locations;
  2. +----------+
  3. | count(*) |
  4. +----------+
  5. | 13 |
  6. +----------+
  7. SELECT 1 row in set (... sec)

count(*) can also be used on group by queries:

  1. cr> select count(*), kind from locations group by kind order by kind asc;
  2. +----------+-------------+
  3. | count(*) | kind |
  4. +----------+-------------+
  5. | 4 | Galaxy |
  6. | 5 | Planet |
  7. | 4 | Star System |
  8. +----------+-------------+
  9. SELECT 3 rows in set (... sec)

count(columnName)

In contrast to the count(*) function the count function used with a column name as parameter will return the number of rows with a non-NULL value in that column.

Example:

  1. cr> select count(name), count(*), date from locations group by date
  2. ... order by count(name) desc, count(*) desc;
  3. +-------------+----------+---------------+
  4. | count(name) | count(*) | date |
  5. +-------------+----------+---------------+
  6. | 7 | 8 | 1373932800000 |
  7. | 4 | 4 | 308534400000 |
  8. | 1 | 1 | 1367366400000 |
  9. +-------------+----------+---------------+
  10. SELECT 3 rows in set (... sec)

count(distinct columnName)

The count aggregation function also supports the distinct keyword. This keyword changes the behaviour of the function so that it will only count the number of distinct values in this column that are not NULL:

  1. cr> select count(distinct kind), count(*), date
  2. ... from locations group by date
  3. ... order by count(distinct kind) desc, count(*) desc;
  4. +----------------------+----------+---------------+
  5. | count(DISTINCT kind) | count(*) | date |
  6. +----------------------+----------+---------------+
  7. | 3 | 8 | 1373932800000 |
  8. | 3 | 4 | 308534400000 |
  9. | 1 | 1 | 1367366400000 |
  10. +----------------------+----------+---------------+
  11. SELECT 3 rows in set (... sec)
  1. cr> select count(distinct kind) from locations;
  2. +----------------------+
  3. | count(DISTINCT kind) |
  4. +----------------------+
  5. | 3 |
  6. +----------------------+
  7. SELECT 1 row in set (... sec)

min

The min aggregation function returns the smallest value in a column that is not NULL. Its single argument is a column name and its return value is always of the type of that column.

Example:

  1. cr> select min(position), kind
  2. ... from locations
  3. ... where name not like 'North %'
  4. ... group by kind order by min(position) asc, kind asc;
  5. +---------------+-------------+
  6. | min(position) | kind |
  7. +---------------+-------------+
  8. | 1 | Planet |
  9. | 1 | Star System |
  10. | 2 | Galaxy |
  11. +---------------+-------------+
  12. SELECT 3 rows in set (... sec)
  1. cr> select min(date) from locations;
  2. +--------------+
  3. | min(date) |
  4. +--------------+
  5. | 308534400000 |
  6. +--------------+
  7. SELECT 1 row in set (... sec)

min returns NULL if the column does not contain any value but NULL. It is allowed on columns with primitive data types. On string columns it will return the lexicographically smallest.

  1. cr> select min(name), kind from locations
  2. ... group by kind order by kind asc;
  3. +------------------------------------+-------------+
  4. | min(name) | kind |
  5. +------------------------------------+-------------+
  6. | Galactic Sector QQ7 Active J Gamma | Galaxy |
  7. | | Planet |
  8. | Aldebaran | Star System |
  9. +------------------------------------+-------------+
  10. SELECT 3 rows in set (... sec)

max

It behaves exactly like min but returns the biggest value in a column that is not NULL.

Some Examples:

  1. cr> select max(position), kind from locations
  2. ... group by kind order by kind desc;
  3. +---------------+-------------+
  4. | max(position) | kind |
  5. +---------------+-------------+
  6. | 4 | Star System |
  7. | 5 | Planet |
  8. | 6 | Galaxy |
  9. +---------------+-------------+
  10. SELECT 3 rows in set (... sec)
  1. cr> select max(position) from locations;
  2. +---------------+
  3. | max(position) |
  4. +---------------+
  5. | 6 |
  6. +---------------+
  7. SELECT 1 row in set (... sec)
  1. cr> select max(name), kind from locations
  2. ... group by kind order by max(name) desc;
  3. +-------------------+-------------+
  4. | max(name) | kind |
  5. +-------------------+-------------+
  6. | Outer Eastern Rim | Galaxy |
  7. | Bartledan | Planet |
  8. | Altair | Star System |
  9. +-------------------+-------------+
  10. SELECT 3 rows in set (... sec)

sum

returns the sum of a set of numeric input values that are not NULL. Depending on the argument type a suitable return type is chosen. For float and double argument types the return type is equal to the argument type. For byte, short, integer and long the return type changes to long. If the range of long values (-2^64 to 2^64-1) gets exceeded an ArithmeticException will be raised.

  1. cr> select sum(position), kind from locations
  2. ... group by kind order by sum(position) asc;
  3. +---------------+-------------+
  4. | sum(position) | kind |
  5. +---------------+-------------+
  6. | 10 | Star System |
  7. | 13 | Galaxy |
  8. | 15 | Planet |
  9. +---------------+-------------+
  10. SELECT 3 rows in set (... sec)
  1. cr> select sum(position) as position_sum from locations;
  2. +--------------+
  3. | position_sum |
  4. +--------------+
  5. | 38 |
  6. +--------------+
  7. SELECT 1 row in set (... sec)
  1. cr> select sum(name), kind from locations group by kind order by sum(name) desc;
  2. SQLActionException[SQLParseException: Cannot cast name to type [double, float, long, integer, short, byte]]

avg and mean

The avg and mean aggregation function returns the arithmetic mean, the average, of all values in a column that are not NULL as a double value. It accepts all numeric columns and timestamp columns as single argument. Using avg on other column types is not allowed.

Example:

  1. cr> select avg(position), kind from locations
  2. ... group by kind order by kind;
  3. +---------------+-------------+
  4. | avg(position) | kind |
  5. +---------------+-------------+
  6. | 3.25 | Galaxy |
  7. | 3.0 | Planet |
  8. | 2.5 | Star System |
  9. +---------------+-------------+
  10. SELECT 3 rows in set (... sec)

avg(distinct columnName)

The avg aggregation function also supports the distinct keyword. This keyword changes the behaviour of the function so that it will only average the number of distinct values in this column that are not NULL:

  1. cr> select avg(distinct position), count(*), date
  2. ... from locations group by date
  3. ... order by avg(distinct position) desc, count(*) desc;
  4. +------------------------+----------+---------------+
  5. | avg(DISTINCT position) | count(*) | date |
  6. +------------------------+----------+---------------+
  7. | 4.0 | 1 | 1367366400000 |
  8. | 3.6 | 8 | 1373932800000 |
  9. | 2.0 | 4 | 308534400000 |
  10. +------------------------+----------+---------------+
  11. SELECT 3 rows in set (... sec)
  1. cr> select avg(distinct position) from locations;
  2. +------------------------+
  3. | avg(DISTINCT position) |
  4. +------------------------+
  5. | 3.5 |
  6. +------------------------+
  7. SELECT 1 row in set (... sec)

geometric_mean

The geometric_mean aggregation function computes the geometric mean, a mean for positive numbers. For details see: Geometric Mean.

geometric mean is defined on all numeric types and on timestamp. It always returns double values. If a value is negative, all values were null or we got no value at all NULL is returned. If any of the aggregated values is 0 the result will be 0.0 as well.

Caution

Due to java double precision arithmetic it is possible that any two executions of the aggregation function on the same data produce slightly differing results.

Example:

  1. cr> select geometric_mean(position), kind from locations
  2. ... group by kind order by kind;
  3. +--------------------------+-------------+
  4. | geometric_mean(position) | kind |
  5. +--------------------------+-------------+
  6. | 2.6321480259049848 | Galaxy |
  7. | 2.6051710846973517 | Planet |
  8. | 2.213363839400643 | Star System |
  9. +--------------------------+-------------+
  10. SELECT 3 rows in set (... sec)

variance

The variance aggregation function computes the Variance of the set of non-null values in a column. It is a measure about how far a set of numbers is spread. A variance of 0.0 indicates that all values are the same.

variance is defined on all numeric types and on timestamp. It returns a double value. If all values were null or we got no value at all NULL is returned.

Example:

  1. cr> select variance(position), kind from locations
  2. ... group by kind order by kind desc;
  3. +--------------------+-------------+
  4. | variance(position) | kind |
  5. +--------------------+-------------+
  6. | 1.25 | Star System |
  7. | 2.0 | Planet |
  8. | 3.6875 | Galaxy |
  9. +--------------------+-------------+
  10. SELECT 3 rows in set (... sec)

Caution

Due to java double precision arithmetic it is possible that any two executions of the aggregation function on the same data produce slightly differing results.

stddev

The stddev aggregation function computes the Standard Deviation of the set of non-null values in a column. It is a measure of the variation of data values. A low standard deviation indicates that the values tend to be near the mean.

stddev is defined on all numeric types and on timestamp. It always returns double values. If all values were null or we got no value at all NULL is returned.

Example:

  1. cr> select stddev(position), kind from locations
  2. ... group by kind order by kind;
  3. +--------------------+-------------+
  4. | stddev(position) | kind |
  5. +--------------------+-------------+
  6. | 1.920286436967152 | Galaxy |
  7. | 1.4142135623730951 | Planet |
  8. | 1.118033988749895 | Star System |
  9. +--------------------+-------------+
  10. SELECT 3 rows in set (... sec)

Caution

Due to java double precision arithmetic it is possible that any two executions of the aggregation function on the same data produce slightly differing results.

percentile

The percentile aggregation function computes a Percentile over numeric non-null values in a column.

Percentiles show the point at which a certain percentage of observed values occur. For example, the 98th percentile is the value which is greater than 98% of the observed values. The result is defined and computed as an interpolated weighted average. According to that it allows the median of the input data to be defined conveniently as the 50th percentile.

The function expects a single fraction or an array of fractions and a column name. Independent of the input column data type the result of percentile always returns a double. If the value at the specified column is null the row is ignored. Fractions must be double precision values between 0 and 1. When supplied a single fraction, the function will return a single value corresponding to the percentile of the specified fraction:

  1. cr> select percentile(position, 0.95), kind from locations
  2. ... group by kind order by kind;
  3. +----------------------------+-------------+
  4. | percentile(position, 0.95) | kind |
  5. +----------------------------+-------------+
  6. | 6.0 | Galaxy |
  7. | 5.0 | Planet |
  8. | 4.0 | Star System |
  9. +----------------------------+-------------+
  10. SELECT 3 rows in set (... sec)

When supplied an array of fractions, the function will return an array of values corresponding to the percentile of each fraction specified:

  1. cr> select percentile(position, [0.0013, 0.9987]) as perc from locations;
  2. +------------+
  3. | perc |
  4. +------------+
  5. | [1.0, 6.0] |
  6. +------------+
  7. SELECT 1 row in set (... sec)

When a query with percentile function won’t match any rows then a null result is returned.

To be able to calculate percentiles over a huge amount of data and to scale out CrateDB calculates approximate instead of accurate percentiles. The algorithm used by the percentile metric is called TDigest. The accuracy/size trade-off of the algorithm is defined by a single compression parameter which has a constant value of 100. However, there are a few guidelines to keep in mind in this implementation:

  • Extreme percentiles (e.g. 99%) are more accurate
  • For small sets percentiles are highly accurate
  • It’s difficult to generalize the exact level of accuracy, as it depends on your data distribution and volume of data being aggregated

arbitrary

The arbitrary aggregation function returns a single value of a column. Which value it returns is not defined.

It accepts references to columns of all primitive types.

Using arbitrary on Object columns is not supported.

Its return type is the type of its parameter column and can be NULL if the column contains NULL values.

Example:

  1. cr> select arbitrary(position) from locations;
  2. +---------------------+
  3. | arbitrary(position) |
  4. +---------------------+
  5. | ... |
  6. +---------------------+
  7. SELECT 1 row in set (... sec)
  1. cr> select arbitrary(name), kind from locations
  2. ... where name != ''
  3. ... group by kind order by kind desc;
  4. +-...-------------+-------------+
  5. | arbitrary(name) | kind |
  6. +-...-------------+-------------+
  7. | ... | Star System |
  8. | ... | Planet |
  9. | ... | Galaxy |
  10. +-...-------------+-------------+
  11. SELECT 3 rows in set (... sec)

An example use case is to group a table with many rows per user by user_id and get the username for every group, that means every user. This works as rows with same user_id have the same username. This method performs better than grouping on username as grouping on number types is generally faster than on strings. The advantage is that the arbitrary function does very little to no computation as for example max aggregation function would do.

hyperloglog_distinct

Note

The hyperloglog_distinct aggregate function is an enterprise feature.

The hyperloglog_distinct aggregate function calculates an approximate count of distinct non-null values using the HyperLogLog++ algorithm.

The return value data type is always a long.

The first argument can be a reference to a column of all Primitive Types. Compound Types and Geographic Types are not supported.

The optional second argument defines the used precision for the HyperLogLog++ algorithm. This allows to trade memory for accuracy, valid values are 4 to 18. The default value for the precision which is used if the second argument is left out is 14.

Examples:

  1. cr> select hyperloglog_distinct(position) from locations;
  2. +--------------------------------+
  3. | hyperloglog_distinct(position) |
  4. +--------------------------------+
  5. | 6 |
  6. +--------------------------------+
  7. SELECT 1 row in set (... sec)
  1. cr> select hyperloglog_distinct(position, 4) from locations;
  2. +-----------------------------------+
  3. | hyperloglog_distinct(position, 4) |
  4. +-----------------------------------+
  5. | 6 |
  6. +-----------------------------------+
  7. SELECT 1 row in set (... sec)

Limitations

  • DISTINCT is not supported with aggregations on Joins.
  • Prior to 2.0.0, unless documented, global aggregation functions are unsupported in combination with DISTINCT.
  • Aggregation functions can only be applied to columns with a plain index, which is the default for all primitive type columns. For more information, please refer to Plain index (Default).