Installing a cluster on Azure with network customizations

In OKD version 4, you can install a cluster with a customized network configuration on infrastructure that the installation program provisions on Microsoft Azure. By customizing your network configuration, your cluster can coexist with existing IP address allocations in your environment and integrate with existing MTU and VXLAN configurations.

You must set most of the network configuration parameters during installation, and you can modify only kubeProxy configuration parameters in a running cluster.

Prerequisites

Generating a key pair for cluster node SSH access

During an OKD installation, you can provide an SSH public key to the installation program. The key is passed to the Fedora CoreOS (FCOS) nodes through their Ignition config files and is used to authenticate SSH access to the nodes. The key is added to the ~/.ssh/authorized_keys list for the core user on each node, which enables password-less authentication.

After the key is passed to the nodes, you can use the key pair to SSH in to the FCOS nodes as the user core. To access the nodes through SSH, the private key identity must be managed by SSH for your local user.

If you want to SSH in to your cluster nodes to perform installation debugging or disaster recovery, you must provide the SSH public key during the installation process. The ./openshift-install gather command also requires the SSH public key to be in place on the cluster nodes.

Do not skip this procedure in production environments, where disaster recovery and debugging is required.

You must use a local key, not one that you configured with platform-specific approaches such as AWS key pairs.

On clusters running Fedora CoreOS (FCOS), the SSH keys specified in the Ignition config files are written to the /home/core/.ssh/authorized_keys.d/core file. However, the Machine Config Operator manages SSH keys in the /home/core/.ssh/authorized_keys file and configures sshd to ignore the /home/core/.ssh/authorized_keys.d/core file. As a result, newly provisioned OKD nodes are not accessible using SSH until the Machine Config Operator reconciles the machine configs with the authorized_keys file. After you can access the nodes using SSH, you can delete the /home/core/.ssh/authorized_keys.d/core file.

Procedure

  1. If you do not have an existing SSH key pair on your local machine to use for authentication onto your cluster nodes, create one. For example, on a computer that uses a Linux operating system, run the following command:

    1. $ ssh-keygen -t ed25519 -N '' -f <path>/<file_name> (1)
    1Specify the path and file name, such as ~/.ssh/id_ed25519, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.

    If you plan to install an OKD cluster that uses the Fedora cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on only the x86_64, ppc64le, and s390x architectures, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.

  2. View the public SSH key:

    1. $ cat <path>/<file_name>.pub

    For example, run the following to view the ~/.ssh/id_ed25519.pub public key:

    1. $ cat ~/.ssh/id_ed25519.pub
  3. Add the SSH private key identity to the SSH agent for your local user, if it has not already been added. SSH agent management of the key is required for password-less SSH authentication onto your cluster nodes, or if you want to use the ./openshift-install gather command.

    On some distributions, default SSH private key identities such as ~/.ssh/id_rsa and ~/.ssh/id_dsa are managed automatically.

    1. If the ssh-agent process is not already running for your local user, start it as a background task:

      1. $ eval "$(ssh-agent -s)"

      Example output

      1. Agent pid 31874

      If your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.

  4. Add your SSH private key to the ssh-agent:

    1. $ ssh-add <path>/<file_name> (1)
    1Specify the path and file name for your SSH private key, such as ~/.ssh/id_ed25519

    Example output

    1. Identity added: /home/<you>/<path>/<file_name> (<computer_name>)

Next steps

  • When you install OKD, provide the SSH public key to the installation program.

Obtaining the installation program

Before you install OKD, download the installation file on the host you are using for installation.

Prerequisites

  • You have a computer that runs Linux or macOS, with 500 MB of local disk space.

Procedure

  1. Download installer from https://github.com/openshift/okd/releases

    The installation program creates several files on the computer that you use to install your cluster. You must keep the installation program and the files that the installation program creates after you finish installing the cluster. Both files are required to delete the cluster.

    Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. To remove your cluster, complete the OKD uninstallation procedures for your specific cloud provider.

  2. Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:

    1. $ tar -xvf openshift-install-linux.tar.gz
  3. Download your installation pull secret from the Red Hat OpenShift Cluster Manager. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OKD components.

    Using a pull secret from the Red Hat OpenShift Cluster Manager is not required. You can use a pull secret for another private registry. Or, if you do not need the cluster to pull images from a private registry, you can use {"auths":{"fake":{"auth":"aWQ6cGFzcwo="}}} as the pull secret when prompted during the installation.

    If you do not use the pull secret from the Red Hat OpenShift Cluster Manager:

    • Red Hat Operators are not available.

    • The Telemetry and Insights operators do not send data to Red Hat.

    • Content from the Red Hat Ecosystem Catalog Container images registry, such as image streams and Operators, are not available.

Creating the installation configuration file

You can customize the OKD cluster you install on Microsoft Azure.

Prerequisites

  • You have the OKD installation program and the pull secret for your cluster.

  • You have an Azure subscription ID and tenant ID.

  • If you are installing the cluster using a service principal, you have its application ID and password.

  • If you are installing the cluster using a system-assigned managed identity, you have enabled it on the virtual machine that you will run the installation program from.

  • If you are installing the cluster using a user-assigned managed identity, you have met these prerequisites:

    • You have its client ID.

    • You have assigned it to the virtual machine that you will run the installation program from.

Procedure

  1. Optional: If you have run the installation program on this computer before, and want to use an alternative service principal or managed identity, go to the ~/.azure/ directory and delete the osServicePrincipal.json configuration file.

    Deleting this file prevents the installation program from automatically reusing subscription and authentication values from a previous installation.

  2. Create the install-config.yaml file.

    1. Change to the directory that contains the installation program and run the following command:

      1. $ ./openshift-install create install-config --dir <installation_directory> (1)
      1For <installation_directory>, specify the directory name to store the files that the installation program creates.

      When specifying the directory:

      • Verify that the directory has the execute permission. This permission is required to run Terraform binaries under the installation directory.

      • Use an empty directory. Some installation assets, such as bootstrap X.509 certificates, have short expiration intervals, therefore you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OKD version.

        Always delete the ~/.powervs directory to avoid reusing a stale configuration. Run the following command:

        1. $ rm -rf ~/.powervs
    2. At the prompts, provide the configuration details for your cloud:

      1. Optional: Select an SSH key to use to access your cluster machines.

        For production OKD clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

      2. Select azure as the platform to target.

        If the installation program cannot locate the osServicePrincipal.json configuration file from a previous installation, you are prompted for Azure subscription and authentication values.

      3. Enter the following Azure parameter values for your subscription:

        • azure subscription id: Enter the subscription ID to use for the cluster.

        • azure tenant id: Enter the tenant ID.

      4. Depending on the Azure identity you are using to deploy the cluster, do one of the following when prompted for the azure service principal client id:

        • If you are using a service principal, enter its application ID.

        • If you are using a system-assigned managed identity, leave this value blank.

        • If you are using a user-assigned managed identity, specify its client ID.

      5. Depending on the Azure identity you are using to deploy the cluster, do one of the following when prompted for the azure service principal client secret:

        • If you are using a service principal, enter its password.

        • If you are using a system-assigned managed identity, leave this value blank.

        • If you are using a user-assigned managed identity, leave this value blank.

      6. Select the region to deploy the cluster to.

      7. Select the base domain to deploy the cluster to. The base domain corresponds to the Azure DNS Zone that you created for your cluster.

      8. Enter a descriptive name for your cluster.

        All Azure resources that are available through public endpoints are subject to resource name restrictions, and you cannot create resources that use certain terms. For a list of terms that Azure restricts, see Resolve reserved resource name errors in the Azure documentation.

  1. Modify the install-config.yaml file. You can find more information about the available parameters in the “Installation configuration parameters” section.

  2. Back up the install-config.yaml file so that you can use it to install multiple clusters.

    The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

If previously not detected, the installation program creates an osServicePrincipal.json configuration file and stores this file in the ~/.azure/ directory on your computer. This ensures that the installation program can load the profile when it is creating an OKD cluster on the target platform.

Additional resources

Minimum resource requirements for cluster installation

Each cluster machine must meet the following minimum requirements:

Table 1. Minimum resource requirements
MachineOperating SystemvCPU [1]Virtual RAMStorageInput/Output Per Second (IOPS)[2]

Bootstrap

FCOS

4

16 GB

100 GB

300

Control plane

FCOS

4

16 GB

100 GB

300

Compute

FCOS

2

8 GB

100 GB

300

  1. One vCPU is equivalent to one physical core when simultaneous multithreading (SMT), or hyperthreading, is not enabled. When enabled, use the following formula to calculate the corresponding ratio: (threads per core × cores) × sockets = vCPUs.

  2. OKD and Kubernetes are sensitive to disk performance, and faster storage is recommended, particularly for etcd on the control plane nodes which require a 10 ms p99 fsync duration. Note that on many cloud platforms, storage size and IOPS scale together, so you might need to over-allocate storage volume to obtain sufficient performance.

  3. As with all user-provisioned installations, if you choose to use Fedora compute machines in your cluster, you take responsibility for all operating system life cycle management and maintenance, including performing system updates, applying patches, and completing all other required tasks. Use of Fedora 7 compute machines is deprecated and has been removed in OKD 4.10 and later.

You are required to use Azure virtual machines that have the premiumIO parameter set to true.

If an instance type for your platform meets the minimum requirements for cluster machines, it is supported to use in OKD.

Additional resources

Tested instance types for Azure

The following Microsoft Azure instance types have been tested with OKD.

Machine types based on 64-bit x86 architecture

  • standardBSFamily

  • standardBsv2Family

  • standardDADSv5Family

  • standardDASv4Family

  • standardDASv5Family

  • standardDCACCV5Family

  • standardDCADCCV5Family

  • standardDCADSv5Family

  • standardDCASv5Family

  • standardDCSv3Family

  • standardDCSv2Family

  • standardDDCSv3Family

  • standardDDSv4Family

  • standardDDSv5Family

  • standardDLDSv5Family

  • standardDLSv5Family

  • standardDSFamily

  • standardDSv2Family

  • standardDSv2PromoFamily

  • standardDSv3Family

  • standardDSv4Family

  • standardDSv5Family

  • standardEADSv5Family

  • standardEASv4Family

  • standardEASv5Family

  • standardEBDSv5Family

  • standardEBSv5Family

  • standardECACCV5Family

  • standardECADCCV5Family

  • standardECADSv5Family

  • standardECASv5Family

  • standardEDSv4Family

  • standardEDSv5Family

  • standardEIADSv5Family

  • standardEIASv4Family

  • standardEIASv5Family

  • standardEIBDSv5Family

  • standardEIBSv5Family

  • standardEIDSv5Family

  • standardEISv3Family

  • standardEISv5Family

  • standardESv3Family

  • standardESv4Family

  • standardESv5Family

  • standardFXMDVSFamily

  • standardFSFamily

  • standardFSv2Family

  • standardGSFamily

  • standardHBrsv2Family

  • standardHBSFamily

  • standardHCSFamily

  • standardHXFamily

  • standardLASv3Family

  • standardLSFamily

  • standardLSv2Family

  • standardLSv3Family

  • standardMDSMediumMemoryv2Family

  • standardMIDSMediumMemoryv2Family

  • standardMISMediumMemoryv2Family

  • standardMSFamily

  • standardMSMediumMemoryv2Family

  • StandardNCADSA100v4Family

  • Standard NCASv3_T4 Family

  • standardNCSv3Family

  • standardNDSv2Family

  • standardNPSFamily

  • StandardNVADSA10v5Family

  • standardNVSv3Family

  • standardXEISv4Family

Tested instance types for Azure on 64-bit ARM infrastructures

The following Microsoft Azure ARM64 instance types have been tested with OKD.

Machine types based on 64-bit ARM architecture

  • standardDPSv5Family

  • standardDPDSv5Family

  • standardDPLDSv5Family

  • standardDPLSv5Family

  • standardEPSv5Family

  • standardEPDSv5Family

Enabling trusted launch for Azure VMs

You can enable two trusted launch features when installing your cluster on Azure: secure boot and virtualized Trusted Platform Modules.

See the Azure documentation about virtual machine sizes to learn what sizes of virtual machines support these features.

Trusted launch is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

Prerequisites

  • You have created an install-config.yaml file.

Procedure

  • Use a text editor to edit the install-config.yaml file prior to deploying your cluster and add the following stanza:

    1. controlPlane: (1)
    2. platform:
    3. azure:
    4. settings:
    5. securityType: TrustedLaunch (2)
    6. trustedLaunch:
    7. uefiSettings:
    8. secureBoot: Enabled (3)
    9. virtualizedTrustedPlatformModule: Enabled (4)
    1Specify controlPlane.platform.azure or compute.platform.azure to enable trusted launch on only control plane or compute nodes respectively. Specify platform.azure.defaultMachinePlatform to enable trusted launch on all nodes.
    2Enable trusted launch features.
    3Enable secure boot. For more information, see the Azure documentation about secure boot.
    4Enable the virtualized Trusted Platform Module. For more information, see the Azure documentation about virtualized Trusted Platform Modules.

Enabling confidential VMs

You can enable confidential VMs when installing your cluster. You can enable confidential VMs for compute nodes, control plane nodes, or all nodes.

Using confidential VMs is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

You can use confidential VMs with the following VM sizes:

  • DCasv5-series

  • DCadsv5-series

  • ECasv5-series

  • ECadsv5-series

Confidential VMs are currently not supported on 64-bit ARM architectures.

Prerequisites

  • You have created an install-config.yaml file.

Procedure

  • Use a text editor to edit the install-config.yaml file prior to deploying your cluster and add the following stanza:

    1. controlPlane: (1)
    2. platform:
    3. azure:
    4. settings:
    5. securityType: ConfidentialVM (2)
    6. confidentialVM:
    7. uefiSettings:
    8. secureBoot: Enabled (3)
    9. virtualizedTrustedPlatformModule: Enabled (4)
    10. osDisk:
    11. securityProfile:
    12. securityEncryptionType: VMGuestStateOnly (5)
    1Specify controlPlane.platform.azure or compute.platform.azure to deploy confidential VMs on only control plane or compute nodes respectively. Specify platform.azure.defaultMachinePlatform to deploy confidential VMs on all nodes.
    2Enable confidential VMs.
    3Enable secure boot. For more information, see the Azure documentation about secure boot.
    4Enable the virtualized Trusted Platform Module. For more information, see the Azure documentation about virtualized Trusted Platform Modules.
    5Specify VMGuestStateOnly to encrypt the VM guest state.

Sample customized install-config.yaml file for Azure

You can customize the install-config.yaml file to specify more details about your OKD cluster’s platform or modify the values of the required parameters.

This sample YAML file is provided for reference only. You must obtain your install-config.yaml file by using the installation program and modify it.

  1. apiVersion: v1
  2. baseDomain: example.com (1)
  3. controlPlane: (2)
  4. hyperthreading: Enabled (3) (4)
  5. name: master
  6. platform:
  7. azure:
  8. encryptionAtHost: true
  9. ultraSSDCapability: Enabled
  10. osDisk:
  11. diskSizeGB: 1024 (5)
  12. diskType: Premium_LRS
  13. diskEncryptionSet:
  14. resourceGroup: disk_encryption_set_resource_group
  15. name: disk_encryption_set_name
  16. subscriptionId: secondary_subscription_id
  17. osImage:
  18. publisher: example_publisher_name
  19. offer: example_image_offer
  20. sku: example_offer_sku
  21. version: example_image_version
  22. type: Standard_D8s_v3
  23. replicas: 3
  24. compute: (2)
  25. - hyperthreading: Enabled (3)
  26. name: worker
  27. platform:
  28. azure:
  29. ultraSSDCapability: Enabled
  30. type: Standard_D2s_v3
  31. encryptionAtHost: true
  32. osDisk:
  33. diskSizeGB: 512 (5)
  34. diskType: Standard_LRS
  35. diskEncryptionSet:
  36. resourceGroup: disk_encryption_set_resource_group
  37. name: disk_encryption_set_name
  38. subscriptionId: secondary_subscription_id
  39. osImage:
  40. publisher: example_publisher_name
  41. offer: example_image_offer
  42. sku: example_offer_sku
  43. version: example_image_version
  44. zones: (6)
  45. - "1"
  46. - "2"
  47. - "3"
  48. replicas: 5
  49. metadata:
  50. name: test-cluster (1)
  51. networking: (2)
  52. clusterNetwork:
  53. - cidr: 10.128.0.0/14
  54. hostPrefix: 23
  55. machineNetwork:
  56. - cidr: 10.0.0.0/16
  57. networkType: OVNKubernetes (7)
  58. serviceNetwork:
  59. - 172.30.0.0/16
  60. platform:
  61. azure:
  62. defaultMachinePlatform:
  63. osImage: (8)
  64. publisher: example_publisher_name
  65. offer: example_image_offer
  66. sku: example_offer_sku
  67. version: example_image_version
  68. ultraSSDCapability: Enabled
  69. baseDomainResourceGroupName: resource_group (9)
  70. region: centralus (1)
  71. resourceGroupName: existing_resource_group (10)
  72. outboundType: Loadbalancer
  73. cloudName: AzurePublicCloud
  74. pullSecret: '{"auths": ...}' (1)
  75. sshKey: ssh-ed25519 AAAA... (11)
1Required. The installation program prompts you for this value.
2If you do not provide these parameters and values, the installation program provides the default value.
3The controlPlane section is a single mapping, but the compute section is a sequence of mappings. To meet the requirements of the different data structures, the first line of the compute section must begin with a hyphen, -, and the first line of the controlPlane section must not. Only one control plane pool is used.
4Whether to enable or disable simultaneous multithreading, or hyperthreading. By default, simultaneous multithreading is enabled to increase the performance of your machines’ cores. You can disable it by setting the parameter value to Disabled. If you disable simultaneous multithreading in some cluster machines, you must disable it in all cluster machines.

If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance. Use larger virtual machine types, such as Standard_D8s_v3, for your machines if you disable simultaneous multithreading.

5You can specify the size of the disk to use in GB. Minimum recommendation for control plane nodes is 1024 GB.
6Specify a list of zones to deploy your machines to. For high availability, specify at least two zones.
7The cluster network plugin to install. The supported values are OVNKubernetes and OpenShiftSDN. The default value is OVNKubernetes.
8Optional: A custom Fedora CoreOS (FCOS) image that should be used to boot control plane and compute machines. The publisher, offer, sku, and version parameters under platform.azure.defaultMachinePlatform.osImage apply to both control plane and compute machines. If the parameters under controlPlane.platform.azure.osImage or compute.platform.azure.osImage are set, they override the platform.azure.defaultMachinePlatform.osImage parameters.
9Specify the name of the resource group that contains the DNS zone for your base domain.
10Specify the name of an already existing resource group to install your cluster to. If undefined, a new resource group is created for the cluster.
11You can optionally provide the sshKey value that you use to access the machines in your cluster.

For production OKD clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

Configuring the cluster-wide proxy during installation

Production environments can deny direct access to the internet and instead have an HTTP or HTTPS proxy available. You can configure a new OKD cluster to use a proxy by configuring the proxy settings in the install-config.yaml file.

Prerequisites

  • You have an existing install-config.yaml file.

  • You reviewed the sites that your cluster requires access to and determined whether any of them need to bypass the proxy. By default, all cluster egress traffic is proxied, including calls to hosting cloud provider APIs. You added sites to the Proxy object’s spec.noProxy field to bypass the proxy if necessary.

    The Proxy object status.noProxy field is populated with the values of the networking.machineNetwork[].cidr, networking.clusterNetwork[].cidr, and networking.serviceNetwork[] fields from your installation configuration.

    For installations on Amazon Web Services (AWS), Google Cloud Platform (GCP), Microsoft Azure, and OpenStack, the Proxy object status.noProxy field is also populated with the instance metadata endpoint (169.254.169.254).

Procedure

  1. Edit your install-config.yaml file and add the proxy settings. For example:

    1. apiVersion: v1
    2. baseDomain: my.domain.com
    3. proxy:
    4. httpProxy: http://<username>:<pswd>@<ip>:<port> (1)
    5. httpsProxy: https://<username>:<pswd>@<ip>:<port> (2)
    6. noProxy: example.com (3)
    7. additionalTrustBundle: | (4)
    8. -----BEGIN CERTIFICATE-----
    9. <MY_TRUSTED_CA_CERT>
    10. -----END CERTIFICATE-----
    11. additionalTrustBundlePolicy: <policy_to_add_additionalTrustBundle> (5)
    1A proxy URL to use for creating HTTP connections outside the cluster. The URL scheme must be http.
    2A proxy URL to use for creating HTTPS connections outside the cluster.
    3A comma-separated list of destination domain names, IP addresses, or other network CIDRs to exclude from proxying. Preface a domain with . to match subdomains only. For example, .y.com matches x.y.com, but not y.com. Use * to bypass the proxy for all destinations.
    4If provided, the installation program generates a config map that is named user-ca-bundle in the openshift-config namespace to hold the additional CA certificates. If you provide additionalTrustBundle and at least one proxy setting, the Proxy object is configured to reference the user-ca-bundle config map in the trustedCA field. The Cluster Network Operator then creates a trusted-ca-bundle config map that merges the contents specified for the trustedCA parameter with the FCOS trust bundle. The additionalTrustBundle field is required unless the proxy’s identity certificate is signed by an authority from the FCOS trust bundle.
    5Optional: The policy to determine the configuration of the Proxy object to reference the user-ca-bundle config map in the trustedCA field. The allowed values are Proxyonly and Always. Use Proxyonly to reference the user-ca-bundle config map only when http/https proxy is configured. Use Always to always reference the user-ca-bundle config map. The default value is Proxyonly.

    The installation program does not support the proxy readinessEndpoints field.

    If the installer times out, restart and then complete the deployment by using the wait-for command of the installer. For example:

    1. $ ./openshift-install wait-for install-complete log-level debug
  2. Save the file and reference it when installing OKD.

The installation program creates a cluster-wide proxy that is named cluster that uses the proxy settings in the provided install-config.yaml file. If no proxy settings are provided, a cluster Proxy object is still created, but it will have a nil spec.

Only the Proxy object named cluster is supported, and no additional proxies can be created.

Network configuration phases

There are two phases prior to OKD installation where you can customize the network configuration.

Phase 1

You can customize the following network-related fields in the install-config.yaml file before you create the manifest files:

  • networking.networkType

  • networking.clusterNetwork

  • networking.serviceNetwork

  • networking.machineNetwork

    For more information on these fields, refer to Installation configuration parameters.

    Set the networking.machineNetwork to match the CIDR that the preferred NIC resides in.

    The CIDR range 172.17.0.0/16 is reserved by libVirt. You cannot use this range or any range that overlaps with this range for any networks in your cluster.

Phase 2

After creating the manifest files by running openshift-install create manifests, you can define a customized Cluster Network Operator manifest with only the fields you want to modify. You can use the manifest to specify advanced network configuration.

You cannot override the values specified in phase 1 in the install-config.yaml file during phase 2. However, you can further customize the network plugin during phase 2.

Specifying advanced network configuration

You can use advanced network configuration for your network plugin to integrate your cluster into your existing network environment. You can specify advanced network configuration only before you install the cluster.

Customizing your network configuration by modifying the OKD manifest files created by the installation program is not supported. Applying a manifest file that you create, as in the following procedure, is supported.

Prerequisites

  • You have created the install-config.yaml file and completed any modifications to it.

Procedure

  1. Change to the directory that contains the installation program and create the manifests:

    1. $ ./openshift-install create manifests --dir <installation_directory> (1)
    1<installation_directory> specifies the name of the directory that contains the install-config.yaml file for your cluster.
  2. Create a stub manifest file for the advanced network configuration that is named cluster-network-03-config.yml in the <installation_directory>/manifests/ directory:

    1. apiVersion: operator.openshift.io/v1
    2. kind: Network
    3. metadata:
    4. name: cluster
    5. spec:
  3. Specify the advanced network configuration for your cluster in the cluster-network-03-config.yml file, such as in the following examples:

    Specify a different VXLAN port for the OpenShift SDN network provider

    1. apiVersion: operator.openshift.io/v1
    2. kind: Network
    3. metadata:
    4. name: cluster
    5. spec:
    6. defaultNetwork:
    7. openshiftSDNConfig:
    8. vxlanPort: 4800

    Enable IPsec for the OVN-Kubernetes network provider

    1. apiVersion: operator.openshift.io/v1
    2. kind: Network
    3. metadata:
    4. name: cluster
    5. spec:
    6. defaultNetwork:
    7. ovnKubernetesConfig:
    8. ipsecConfig: {}
  4. Optional: Back up the manifests/cluster-network-03-config.yml file. The installation program consumes the manifests/ directory when you create the Ignition config files.

Cluster Network Operator configuration

The configuration for the cluster network is specified as part of the Cluster Network Operator (CNO) configuration and stored in a custom resource (CR) object that is named cluster. The CR specifies the fields for the Network API in the operator.openshift.io API group.

The CNO configuration inherits the following fields during cluster installation from the Network API in the Network.config.openshift.io API group and these fields cannot be changed:

clusterNetwork

IP address pools from which pod IP addresses are allocated.

serviceNetwork

IP address pool for services.

defaultNetwork.type

Cluster network plugin, such as OpenShift SDN or OVN-Kubernetes.

You can specify the cluster network plugin configuration for your cluster by setting the fields for the defaultNetwork object in the CNO object named cluster.

Cluster Network Operator configuration object

The fields for the Cluster Network Operator (CNO) are described in the following table:

Table 2. Cluster Network Operator configuration object
FieldTypeDescription

metadata.name

string

The name of the CNO object. This name is always cluster.

spec.clusterNetwork

array

A list specifying the blocks of IP addresses from which pod IP addresses are allocated and the subnet prefix length assigned to each individual node in the cluster. For example:

  1. spec:
  2. clusterNetwork:
  3. - cidr: 10.128.0.0/19
  4. hostPrefix: 23
  5. - cidr: 10.128.32.0/19
  6. hostPrefix: 23

You can customize this field only in the install-config.yaml file before you create the manifests. The value is read-only in the manifest file.

spec.serviceNetwork

array

A block of IP addresses for services. The OpenShift SDN and OVN-Kubernetes network plugins support only a single IP address block for the service network. For example:

  1. spec:
  2. serviceNetwork:
  3. - 172.30.0.0/14

You can customize this field only in the install-config.yaml file before you create the manifests. The value is read-only in the manifest file.

spec.defaultNetwork

object

Configures the network plugin for the cluster network.

spec.kubeProxyConfig

object

The fields for this object specify the kube-proxy configuration. If you are using the OVN-Kubernetes cluster network plugin, the kube-proxy configuration has no effect.

defaultNetwork object configuration

The values for the defaultNetwork object are defined in the following table:

Table 3. defaultNetwork object
FieldTypeDescription

type

string

Either OpenShiftSDN or OVNKubernetes. The Red Hat OpenShift Networking network plugin is selected during installation. This value cannot be changed after cluster installation.

OKD uses the OVN-Kubernetes network plugin by default.

openshiftSDNConfig

object

This object is only valid for the OpenShift SDN network plugin.

ovnKubernetesConfig

object

This object is only valid for the OVN-Kubernetes network plugin.

Configuration for the OpenShift SDN network plugin

The following table describes the configuration fields for the OpenShift SDN network plugin:

Table 4. openshiftSDNConfig object
FieldTypeDescription

mode

string

Configures the network isolation mode for OpenShift SDN. The default value is NetworkPolicy.

The values Multitenant and Subnet are available for backwards compatibility with OKD 3.x but are not recommended. This value cannot be changed after cluster installation.

mtu

integer

The maximum transmission unit (MTU) for the VXLAN overlay network. This is detected automatically based on the MTU of the primary network interface. You do not normally need to override the detected MTU.

If the auto-detected value is not what you expect it to be, confirm that the MTU on the primary network interface on your nodes is correct. You cannot use this option to change the MTU value of the primary network interface on the nodes.

If your cluster requires different MTU values for different nodes, you must set this value to 50 less than the lowest MTU value in your cluster. For example, if some nodes in your cluster have an MTU of 9001, and some have an MTU of 1500, you must set this value to 1450.

This value cannot be changed after cluster installation.

vxlanPort

integer

The port to use for all VXLAN packets. The default value is 4789. This value cannot be changed after cluster installation.

If you are running in a virtualized environment with existing nodes that are part of another VXLAN network, then you might be required to change this. For example, when running an OpenShift SDN overlay on top of VMware NSX-T, you must select an alternate port for the VXLAN, because both SDNs use the same default VXLAN port number.

On Amazon Web Services (AWS), you can select an alternate port for the VXLAN between port 9000 and port 9999.

Example OpenShift SDN configuration

  1. defaultNetwork:
  2. type: OpenShiftSDN
  3. openshiftSDNConfig:
  4. mode: NetworkPolicy
  5. mtu: 1450
  6. vxlanPort: 4789
Configuration for the OVN-Kubernetes network plugin

The following table describes the configuration fields for the OVN-Kubernetes network plugin:

Table 5. ovnKubernetesConfig object
FieldTypeDescription

mtu

integer

The maximum transmission unit (MTU) for the Geneve (Generic Network Virtualization Encapsulation) overlay network. This is detected automatically based on the MTU of the primary network interface. You do not normally need to override the detected MTU.

If the auto-detected value is not what you expect it to be, confirm that the MTU on the primary network interface on your nodes is correct. You cannot use this option to change the MTU value of the primary network interface on the nodes.

If your cluster requires different MTU values for different nodes, you must set this value to 100 less than the lowest MTU value in your cluster. For example, if some nodes in your cluster have an MTU of 9001, and some have an MTU of 1500, you must set this value to 1400.

genevePort

integer

The port to use for all Geneve packets. The default value is 6081. This value cannot be changed after cluster installation.

ipsecConfig

object

Specify an empty object to enable IPsec encryption.

policyAuditConfig

object

Specify a configuration object for customizing network policy audit logging. If unset, the defaults audit log settings are used.

gatewayConfig

object

Optional: Specify a configuration object for customizing how egress traffic is sent to the node gateway.

While migrating egress traffic, you can expect some disruption to workloads and service traffic until the Cluster Network Operator (CNO) successfully rolls out the changes.

v4InternalSubnet

If your existing network infrastructure overlaps with the 100.64.0.0/16 IPv4 subnet, you can specify a different IP address range for internal use by OVN-Kubernetes. You must ensure that the IP address range does not overlap with any other subnet used by your OKD installation. The IP address range must be larger than the maximum number of nodes that can be added to the cluster. For example, if the clusterNetwork.cidr value is 10.128.0.0/14 and the clusterNetwork.hostPrefix value is /23, then the maximum number of nodes is 2^(23-14)=512.

This field cannot be changed after installation.

The default value is 100.64.0.0/16.

v6InternalSubnet

If your existing network infrastructure overlaps with the fd98::/48 IPv6 subnet, you can specify a different IP address range for internal use by OVN-Kubernetes. You must ensure that the IP address range does not overlap with any other subnet used by your OKD installation. The IP address range must be larger than the maximum number of nodes that can be added to the cluster.

This field cannot be changed after installation.

The default value is fd98::/48.

Table 6. policyAuditConfig object
FieldTypeDescription

rateLimit

integer

The maximum number of messages to generate every second per node. The default value is 20 messages per second.

maxFileSize

integer

The maximum size for the audit log in bytes. The default value is 50000000 or 50 MB.

destination

string

One of the following additional audit log targets:

    libc

    The libc syslog() function of the journald process on the host.

    udp:<host>:<port>

    A syslog server. Replace <host>:<port> with the host and port of the syslog server.

    unix:<file>

    A Unix Domain Socket file specified by <file>.

    null

    Do not send the audit logs to any additional target.

syslogFacility

string

The syslog facility, such as kern, as defined by RFC5424. The default value is local0.

Table 7. gatewayConfig object
FieldTypeDescription

routingViaHost

boolean

Set this field to true to send egress traffic from pods to the host networking stack. For highly-specialized installations and applications that rely on manually configured routes in the kernel routing table, you might want to route egress traffic to the host networking stack. By default, egress traffic is processed in OVN to exit the cluster and is not affected by specialized routes in the kernel routing table. The default value is false.

This field has an interaction with the Open vSwitch hardware offloading feature. If you set this field to true, you do not receive the performance benefits of the offloading because egress traffic is processed by the host networking stack.

ipForwarding

object

You can control IP forwarding for all traffic on OVN-Kubernetes managed interfaces by using the ipForwarding specification in the Network resource. Specify Restricted to only allow IP forwarding for Kubernetes related traffic. Specify Global to allow forwarding of all IP traffic. For new installations, the default is Restricted. For updates to OKD 4.14 or later, the default is Global.

Example OVN-Kubernetes configuration with IPSec enabled

  1. defaultNetwork:
  2. type: OVNKubernetes
  3. ovnKubernetesConfig:
  4. mtu: 1400
  5. genevePort: 6081
  6. ipsecConfig: {}

kubeProxyConfig object configuration

The values for the kubeProxyConfig object are defined in the following table:

Table 8. kubeProxyConfig object
FieldTypeDescription

iptablesSyncPeriod

string

The refresh period for iptables rules. The default value is 30s. Valid suffixes include s, m, and h and are described in the Go time package documentation.

Because of performance improvements introduced in OKD 4.3 and greater, adjusting the iptablesSyncPeriod parameter is no longer necessary.

proxyArguments.iptables-min-sync-period

array

The minimum duration before refreshing iptables rules. This field ensures that the refresh does not happen too frequently. Valid suffixes include s, m, and h and are described in the Go time package. The default value is:

  1. kubeProxyConfig:
  2. proxyArguments:
  3. iptables-min-sync-period:
  4. - 0s

Configuring hybrid networking with OVN-Kubernetes

You can configure your cluster to use hybrid networking with the OVN-Kubernetes network plugin. This allows a hybrid cluster that supports different node networking configurations.

This configuration is necessary to run both Linux and Windows nodes in the same cluster.

Prerequisites

  • You defined OVNKubernetes for the networking.networkType parameter in the install-config.yaml file. See the installation documentation for configuring OKD network customizations on your chosen cloud provider for more information.

Procedure

  1. Change to the directory that contains the installation program and create the manifests:

    1. $ ./openshift-install create manifests --dir <installation_directory>

    where:

    <installation_directory>

    Specifies the name of the directory that contains the install-config.yaml file for your cluster.

  2. Create a stub manifest file for the advanced network configuration that is named cluster-network-03-config.yml in the <installation_directory>/manifests/ directory:

    1. $ cat <<EOF > <installation_directory>/manifests/cluster-network-03-config.yml
    2. apiVersion: operator.openshift.io/v1
    3. kind: Network
    4. metadata:
    5. name: cluster
    6. spec:
    7. EOF

    where:

    <installation_directory>

    Specifies the directory name that contains the manifests/ directory for your cluster.

  3. Open the cluster-network-03-config.yml file in an editor and configure OVN-Kubernetes with hybrid networking, such as in the following example:

    Specify a hybrid networking configuration

    1. apiVersion: operator.openshift.io/v1
    2. kind: Network
    3. metadata:
    4. name: cluster
    5. spec:
    6. defaultNetwork:
    7. ovnKubernetesConfig:
    8. hybridOverlayConfig:
    9. hybridClusterNetwork: (1)
    10. - cidr: 10.132.0.0/14
    11. hostPrefix: 23
    12. hybridOverlayVXLANPort: 9898 (2)
    1Specify the CIDR configuration used for nodes on the additional overlay network. The hybridClusterNetwork CIDR cannot overlap with the clusterNetwork CIDR.
    2Specify a custom VXLAN port for the additional overlay network. This is required for running Windows nodes in a cluster installed on vSphere, and must not be configured for any other cloud provider. The custom port can be any open port excluding the default 4789 port. For more information on this requirement, see the Microsoft documentation on Pod-to-pod connectivity between hosts is broken.

    Windows Server Long-Term Servicing Channel (LTSC): Windows Server 2019 is not supported on clusters with a custom hybridOverlayVXLANPort value because this Windows server version does not support selecting a custom VXLAN port.

  4. Save the cluster-network-03-config.yml file and quit the text editor.

  5. Optional: Back up the manifests/cluster-network-03-config.yml file. The installation program deletes the manifests/ directory when creating the cluster.

For more information on using Linux and Windows nodes in the same cluster, see Understanding Windows container workloads.

Additional resources

Installing the OpenShift CLI by downloading the binary

You can install the OpenShift CLI (oc) to interact with OKD from a command-line interface. You can install oc on Linux, Windows, or macOS.

If you installed an earlier version of oc, you cannot use it to complete all of the commands in OKD 4. Download and install the new version of oc.

Installing the OpenShift CLI on Linux

You can install the OpenShift CLI (oc) binary on Linux by using the following procedure.

Procedure

  1. Navigate to https://mirror.openshift.com/pub/openshift-v4/clients/oc/latest/ and choose the folder for your operating system and architecture.

  2. Download oc.tar.gz.

  3. Unpack the archive:

    1. $ tar xvf <file>
  4. Place the oc binary in a directory that is on your PATH.

    To check your PATH, execute the following command:

    1. $ echo $PATH

Verification

  • After you install the OpenShift CLI, it is available using the oc command:

    1. $ oc <command>

Installing the OpenShift CLI on Windows

You can install the OpenShift CLI (oc) binary on Windows by using the following procedure.

Procedure

  1. Navigate to https://mirror.openshift.com/pub/openshift-v4/clients/oc/latest/ and choose the folder for your operating system and architecture.

  2. Download oc.zip.

  3. Unzip the archive with a ZIP program.

  4. Move the oc binary to a directory that is on your PATH.

    To check your PATH, open the command prompt and execute the following command:

    1. C:\> path

Verification

  • After you install the OpenShift CLI, it is available using the oc command:

    1. C:\> oc <command>

Installing the OpenShift CLI on macOS

You can install the OpenShift CLI (oc) binary on macOS by using the following procedure.

Procedure

  1. Navigate to https://mirror.openshift.com/pub/openshift-v4/clients/oc/latest/ and choose the folder for your operating system and architecture.

  2. Download oc.tar.gz.

  3. Unpack and unzip the archive.

  4. Move the oc binary to a directory on your PATH.

    To check your PATH, open a terminal and execute the following command:

    1. $ echo $PATH

Verification

  • After you install the OpenShift CLI, it is available using the oc command:

    1. $ oc <command>

Alternatives to storing administrator-level secrets in the kube-system project

By default, administrator secrets are stored in the kube-system project. If you configured the credentialsMode parameter in the install-config.yaml file to Manual, you must use one of the following alternatives:

Manually creating long-term credentials

The Cloud Credential Operator (CCO) can be put into manual mode prior to installation in environments where the cloud identity and access management (IAM) APIs are not reachable, or the administrator prefers not to store an administrator-level credential secret in the cluster kube-system namespace.

Procedure

  1. If you did not set the credentialsMode parameter in the install-config.yaml configuration file to Manual, modify the value as shown:

    Sample configuration file snippet

    1. apiVersion: v1
    2. baseDomain: example.com
    3. credentialsMode: Manual
    4. # ...
  2. If you have not previously created installation manifest files, do so by running the following command:

    1. $ openshift-install create manifests --dir <installation_directory>

    where <installation_directory> is the directory in which the installation program creates files.

  3. Set a $RELEASE_IMAGE variable with the release image from your installation file by running the following command:

    1. $ RELEASE_IMAGE=$(./openshift-install version | awk '/release image/ {print $3}')
  4. Extract the list of CredentialsRequest custom resources (CRs) from the OKD release image by running the following command:

    1. $ oc adm release extract \
    2. --from=$RELEASE_IMAGE \
    3. --credentials-requests \
    4. --included \(1)
    5. --install-config=<path_to_directory_with_installation_configuration>/install-config.yaml \(2)
    6. --to=<path_to_directory_for_credentials_requests> (3)
    1The —included parameter includes only the manifests that your specific cluster configuration requires.
    2Specify the location of the install-config.yaml file.
    3Specify the path to the directory where you want to store the CredentialsRequest objects. If the specified directory does not exist, this command creates it.

    This command creates a YAML file for each CredentialsRequest object.

    Sample CredentialsRequest object

    1. apiVersion: cloudcredential.openshift.io/v1
    2. kind: CredentialsRequest
    3. metadata:
    4. name: <component_credentials_request>
    5. namespace: openshift-cloud-credential-operator
    6. ...
    7. spec:
    8. providerSpec:
    9. apiVersion: cloudcredential.openshift.io/v1
    10. kind: AzureProviderSpec
    11. roleBindings:
    12. - role: Contributor
    13. ...
  5. Create YAML files for secrets in the openshift-install manifests directory that you generated previously. The secrets must be stored using the namespace and secret name defined in the spec.secretRef for each CredentialsRequest object.

    Sample CredentialsRequest object with secrets

    1. apiVersion: cloudcredential.openshift.io/v1
    2. kind: CredentialsRequest
    3. metadata:
    4. name: <component_credentials_request>
    5. namespace: openshift-cloud-credential-operator
    6. ...
    7. spec:
    8. providerSpec:
    9. apiVersion: cloudcredential.openshift.io/v1
    10. kind: AzureProviderSpec
    11. roleBindings:
    12. - role: Contributor
    13. ...
    14. secretRef:
    15. name: <component_secret>
    16. namespace: <component_namespace>
    17. ...

    Sample Secret object

    1. apiVersion: v1
    2. kind: Secret
    3. metadata:
    4. name: <component_secret>
    5. namespace: <component_namespace>
    6. data:
    7. azure_subscription_id: <base64_encoded_azure_subscription_id>
    8. azure_client_id: <base64_encoded_azure_client_id>
    9. azure_client_secret: <base64_encoded_azure_client_secret>
    10. azure_tenant_id: <base64_encoded_azure_tenant_id>
    11. azure_resource_prefix: <base64_encoded_azure_resource_prefix>
    12. azure_resourcegroup: <base64_encoded_azure_resourcegroup>
    13. azure_region: <base64_encoded_azure_region>

Before upgrading a cluster that uses manually maintained credentials, you must ensure that the CCO is in an upgradeable state.

Configuring an Azure cluster to use short-term credentials

To install a cluster that uses Azure AD Workload Identity, you must configure the Cloud Credential Operator utility and create the required Azure resources for your cluster.

Configuring the Cloud Credential Operator utility

To create and manage cloud credentials from outside of the cluster when the Cloud Credential Operator (CCO) is operating in manual mode, extract and prepare the CCO utility (ccoctl) binary.

The ccoctl utility is a Linux binary that must run in a Linux environment.

Prerequisites

  • You have access to an OKD account with cluster administrator access.

  • You have installed the OpenShift CLI (oc).

  • You have created a global Microsoft Azure account for the ccoctl utility to use with the following permissions:

    Required Azure permissions

    • Microsoft.Resources/subscriptions/resourceGroups/read

    • Microsoft.Resources/subscriptions/resourceGroups/write

    • Microsoft.Resources/subscriptions/resourceGroups/delete

    • Microsoft.Authorization/roleAssignments/read

    • Microsoft.Authorization/roleAssignments/delete

    • Microsoft.Authorization/roleAssignments/write

    • Microsoft.Authorization/roleDefinitions/read

    • Microsoft.Authorization/roleDefinitions/write

    • Microsoft.Authorization/roleDefinitions/delete

    • Microsoft.Storage/storageAccounts/listkeys/action

    • Microsoft.Storage/storageAccounts/delete

    • Microsoft.Storage/storageAccounts/read

    • Microsoft.Storage/storageAccounts/write

    • Microsoft.Storage/storageAccounts/blobServices/containers/write

    • Microsoft.Storage/storageAccounts/blobServices/containers/delete

    • Microsoft.Storage/storageAccounts/blobServices/containers/read

    • Microsoft.ManagedIdentity/userAssignedIdentities/delete

    • Microsoft.ManagedIdentity/userAssignedIdentities/read

    • Microsoft.ManagedIdentity/userAssignedIdentities/write

    • Microsoft.ManagedIdentity/userAssignedIdentities/federatedIdentityCredentials/read

    • Microsoft.ManagedIdentity/userAssignedIdentities/federatedIdentityCredentials/write

    • Microsoft.ManagedIdentity/userAssignedIdentities/federatedIdentityCredentials/delete

    • Microsoft.Storage/register/action

    • Microsoft.ManagedIdentity/register/action

Procedure

  1. Obtain the OKD release image by running the following command:

    1. $ RELEASE_IMAGE=$(./openshift-install version | awk '/release image/ {print $3}')
  2. Obtain the CCO container image from the OKD release image by running the following command:

    1. $ CCO_IMAGE=$(oc adm release info --image-for='cloud-credential-operator' $RELEASE_IMAGE -a ~/.pull-secret)

    Ensure that the architecture of the $RELEASE_IMAGE matches the architecture of the environment in which you will use the ccoctl tool.

  3. Extract the ccoctl binary from the CCO container image within the OKD release image by running the following command:

    1. $ oc image extract $CCO_IMAGE --file="/usr/bin/ccoctl" -a ~/.pull-secret
  4. Change the permissions to make ccoctl executable by running the following command:

    1. $ chmod 775 ccoctl

Verification

  • To verify that ccoctl is ready to use, display the help file by running the following command:

    1. $ ccoctl --help

    Output of ccoctl --help

    1. OpenShift credentials provisioning tool
    2. Usage:
    3. ccoctl [command]
    4. Available Commands:
    5. alibabacloud Manage credentials objects for alibaba cloud
    6. aws Manage credentials objects for AWS cloud
    7. azure Manage credentials objects for Azure
    8. gcp Manage credentials objects for Google cloud
    9. help Help about any command
    10. ibmcloud Manage credentials objects for IBM Cloud
    11. nutanix Manage credentials objects for Nutanix
    12. Flags:
    13. -h, --help help for ccoctl
    14. Use "ccoctl [command] --help" for more information about a command.

Creating Azure resources with the Cloud Credential Operator utility

You can use the ccoctl azure create-all command to automate the creation of Azure resources.

By default, ccoctl creates objects in the directory in which the commands are run. To create the objects in a different directory, use the —output-dir flag. This procedure uses <path_to_ccoctl_output_dir> to refer to this directory.

Prerequisites

You must have:

  • Extracted and prepared the ccoctl binary.

  • Access to your Microsoft Azure account by using the Azure CLI.

Procedure

  1. Set a $RELEASE_IMAGE variable with the release image from your installation file by running the following command:

    1. $ RELEASE_IMAGE=$(./openshift-install version | awk '/release image/ {print $3}')
  2. Extract the list of CredentialsRequest objects from the OKD release image by running the following command:

    1. $ oc adm release extract \
    2. --from=$RELEASE_IMAGE \
    3. --credentials-requests \
    4. --included \(1)
    5. --install-config=<path_to_directory_with_installation_configuration>/install-config.yaml \(2)
    6. --to=<path_to_directory_for_credentials_requests> (3)
    1The —included parameter includes only the manifests that your specific cluster configuration requires.
    2Specify the location of the install-config.yaml file.
    3Specify the path to the directory where you want to store the CredentialsRequest objects. If the specified directory does not exist, this command creates it.

    This command might take a few moments to run.

  3. To enable the ccoctl utility to detect your Azure credentials automatically, log in to the Azure CLI by running the following command:

    1. $ az login
  4. Use the ccoctl tool to process all CredentialsRequest objects by running the following command:

    1. $ ccoctl azure create-all \
    2. --name=<azure_infra_name> \(1)
    3. --output-dir=<ccoctl_output_dir> \(2)
    4. --region=<azure_region> \(3)
    5. --subscription-id=<azure_subscription_id> \(4)
    6. --credentials-requests-dir=<path_to_credentials_requests_directory> \(5)
    7. --dnszone-resource-group-name=<azure_dns_zone_resource_group_name> \(6)
    8. --tenant-id=<azure_tenant_id> (7)
    1Specify the user-defined name for all created Azure resources used for tracking.
    2Optional: Specify the directory in which you want the ccoctl utility to create objects. By default, the utility creates objects in the directory in which the commands are run.
    3Specify the Azure region in which cloud resources will be created.
    4Specify the Azure subscription ID to use.
    5Specify the directory containing the files for the component CredentialsRequest objects.
    6Specify the name of the resource group containing the cluster’s base domain Azure DNS zone.
    7Specify the Azure tenant ID to use.

    If your cluster uses Technology Preview features that are enabled by the TechPreviewNoUpgrade feature set, you must include the —enable-tech-preview parameter.

    To see additional optional parameters and explanations of how to use them, run the azure create-all —help command.

Verification

  • To verify that the OKD secrets are created, list the files in the <path_to_ccoctl_output_dir>/manifests directory:

    1. $ ls <path_to_ccoctl_output_dir>/manifests

    Example output

    1. azure-ad-pod-identity-webhook-config.yaml
    2. cluster-authentication-02-config.yaml
    3. openshift-cloud-controller-manager-azure-cloud-credentials-credentials.yaml
    4. openshift-cloud-network-config-controller-cloud-credentials-credentials.yaml
    5. openshift-cluster-api-capz-manager-bootstrap-credentials-credentials.yaml
    6. openshift-cluster-csi-drivers-azure-disk-credentials-credentials.yaml
    7. openshift-cluster-csi-drivers-azure-file-credentials-credentials.yaml
    8. openshift-image-registry-installer-cloud-credentials-credentials.yaml
    9. openshift-ingress-operator-cloud-credentials-credentials.yaml
    10. openshift-machine-api-azure-cloud-credentials-credentials.yaml

    You can verify that the Azure AD service accounts are created by querying Azure. For more information, refer to Azure documentation on listing AD service accounts.

Incorporating the Cloud Credential Operator utility manifests

To implement short-term security credentials managed outside the cluster for individual components, you must move the manifest files that the Cloud Credential Operator utility (ccoctl) created to the correct directories for the installation program.

Prerequisites

  • You have configured an account with the cloud platform that hosts your cluster.

  • You have configured the Cloud Credential Operator utility (ccoctl).

  • You have created the cloud provider resources that are required for your cluster with the ccoctl utility.

Procedure

  1. If you did not set the credentialsMode parameter in the install-config.yaml configuration file to Manual, modify the value as shown:

    Sample configuration file snippet

    1. apiVersion: v1
    2. baseDomain: example.com
    3. credentialsMode: Manual
    4. # ...
  2. If you used the ccoctl utility to create a new Azure resource group instead of using an existing resource group, modify the resourceGroupName parameter in the install-config.yaml as shown:

    Sample configuration file snippet

    1. apiVersion: v1
    2. baseDomain: example.com
    3. # ...
    4. platform:
    5. azure:
    6. resourceGroupName: <azure_infra_name> (1)
    7. # ...
    1This value must match the user-defined name for Azure resources that was specified with the —name argument of the ccoctl azure create-all command.
  3. If you have not previously created installation manifest files, do so by running the following command:

    1. $ openshift-install create manifests --dir <installation_directory>

    where <installation_directory> is the directory in which the installation program creates files.

  4. Copy the manifests that the ccoctl utility generated to the manifests directory that the installation program created by running the following command:

    1. $ cp /<path_to_ccoctl_output_dir>/manifests/* ./manifests/
  5. Copy the private key that the ccoctl utility generated in the tls directory to the installation directory by running the following command:

    1. $ cp -a /<path_to_ccoctl_output_dir>/tls .

Deploying the cluster

You can install OKD on a compatible cloud platform.

You can run the create cluster command of the installation program only once, during initial installation.

Prerequisites

  • You have configured an account with the cloud platform that hosts your cluster.

  • You have the OKD installation program and the pull secret for your cluster.

  • You have an Azure subscription ID and tenant ID.

Procedure

  • Change to the directory that contains the installation program and initialize the cluster deployment:

    1. $ ./openshift-install create cluster --dir <installation_directory> \ (1)
    2. --log-level=info (2)
    1For <installation_directory>, specify the location of your customized ./install-config.yaml file.
    2To view different installation details, specify warn, debug, or error instead of info.

Verification

When the cluster deployment completes successfully:

  • The terminal displays directions for accessing your cluster, including a link to the web console and credentials for the kubeadmin user.

  • Credential information also outputs to <installation_directory>/.openshift_install.log.

Do not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

Example output

  1. ...
  2. INFO Install complete!
  3. INFO To access the cluster as the system:admin user when using 'oc', run 'export KUBECONFIG=/home/myuser/install_dir/auth/kubeconfig'
  4. INFO Access the OpenShift web-console here: https://console-openshift-console.apps.mycluster.example.com
  5. INFO Login to the console with user: "kubeadmin", and password: "password"
  6. INFO Time elapsed: 36m22s
  • The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.

  • It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.

Logging in to the cluster by using the CLI

You can log in to your cluster as a default system user by exporting the cluster kubeconfig file. The kubeconfig file contains information about the cluster that is used by the CLI to connect a client to the correct cluster and API server. The file is specific to a cluster and is created during OKD installation.

Prerequisites

  • You deployed an OKD cluster.

  • You installed the oc CLI.

Procedure

  1. Export the kubeadmin credentials:

    1. $ export KUBECONFIG=<installation_directory>/auth/kubeconfig (1)
    1For <installation_directory>, specify the path to the directory that you stored the installation files in.
  2. Verify you can run oc commands successfully using the exported configuration:

    1. $ oc whoami

    Example output

    1. system:admin

Additional resources

Additional resources

Next steps