Auto Sharding

AttentionThis page documents an earlier version. Go to the latest (v2.1)version.

YugabyteDB automatically splits user tables into multiple shards, called tablets. The primary key for each row in the table uniquely determines the tablet the row lives in. For data distribution purposes, a hash based partitioning scheme is used. Read more about how sharding works in YugabyteDB.

By default, Yugabyte creates 8 tablets per node in the cluster for each table and automatically distributes the data across the various tablets, which in turn are distributed evenly across the nodes. In this tutorial, we will explore how automatic sharding is done internally for Cassandra tables. The system Redis table works in an identical manner.

We will explore automatic sharding inside YugabyteDB by creating these tables:

  • Use a replication factor of 1. This will make it easier to understand how automatic sharding is achieved independent of data replication.
  • Insert entries one by one, and examine which how the data gets distributed across the various nodes.

If you haven’t installed YugabyteDB yet, do so first by following the Quick Start guide.

1. Setup - create universe

If you have a previously running local universe, destroy it using the following.

  1. $ ./bin/yb-ctl destroy

Start a new local universe with a replication factor of 1 (rf=1). We are passing the following options/flags:

  • —replication_factor 1 This creates a universe with a replication factor of 1.
  • —num_shards_per_tserver 4 This option controls the total number of tablets (or partitions) when creating a new table. By making this number 4, we will end up creating 12 tablets on a 3 node cluster.
  • —tserver_flags "memstore_size_mb=1" This sets the total size of memstores on the tablet-servers to 1MB. We do this in order to force a flush of the data to disk when we insert a value more than 1MB, so that we can observe which tablets the data gets written to.

You can do this as shown below.

  1. $ ./bin/yb-ctl --replication_factor 1 --num_shards_per_tserver 4 create \
  2. --tserver_flags "memstore_size_mb=1"

The above command creates a universe with one node. Let us add 2 more nodes to make this a 3-node, rf=1 universe. We need to pass the memstore size flag to each new tserver we add. You can do that by running the following:

  1. $ ./bin/yb-ctl add_node --tserver_flags "memstore_size_mb=1"
  1. $ ./bin/yb-ctl add_node --tserver_flags "memstore_size_mb=1"

We can check the status of the cluster to confirm that we have 3 tservers.

  1. $ ./bin/yb-ctl status
  1. 2018-02-03 21:33:05,455 INFO: Server is running: type=master, node_id=1, PID=18967, admin service=http://127.0.0.1:7000
  2. 2018-02-03 21:33:05,477 INFO: Server is running: type=tserver, node_id=1, PID=18970, admin service=http://127.0.0.1:9000, cql service=127.0.0.1:9042, redis service=127.0.0.1:6379
  3. 2018-02-03 21:33:05,499 INFO: Server is running: type=tserver, node_id=2, PID=19299, admin service=http://127.0.0.2:9000, cql service=127.0.0.2:9042, redis service=127.0.0.2:6379
  4. 2018-02-03 21:33:05,523 INFO: Server is running: type=tserver, node_id=3, PID=19390, admin service=http://127.0.0.3:9000, cql service=127.0.0.3:9042, redis service=127.0.0.3:6379

2. Create a Cassandra table

Create a Cassandra table. The keyspace and table name below must created exactly as shown below, since we will be using the sample application to write data into this table.

  1. $ ./bin/cqlsh
  1. cqlsh> CREATE KEYSPACE ybdemo_keyspace;
  1. cqlsh> CREATE TABLE ybdemo_keyspace.cassandrakeyvalue (k text PRIMARY KEY, v blob);

For each table, we have instructed YugabyteDB to create 4 shards per tserver present in the universe. Since we have 3 nodes, we expect 12 tablets for the ybdemo_keyspace.cassandrakeyvalue table.

3. Explore tablets

  • The tablets are evenly balanced across the various nodes.

You can see the number of tablets per node in the Tablet Servers page of the master Admin UI, by going to the table details page. The page should look something like the image below.

Number of tablets in the Cassandra table

We see that each node has 4 tablets, and the total number of tablets is 12 as we expected.

  • The table has 12 tablets, each owning a range of the keyspace.

Let us navigate to the table details page to examine the various tablets. This page should look as follows.

Tablet details of the Cassandra table

What we see here is that there are 12 tablets as expected, and the key ranges owned by each tablet are shown. This page also shows which node that is currently hosting (and is the leader for) each of these tablets. Note here that the tablets balancing across nodes happens on a per-table basis, so that each table is scaled out to an appropriate number of nodes.

  • Each tablet has a separate directory dedicated to it for data.

Let us list out all the tablet directories and see their sizes. This can be done as follows.

  1. $ du -hs /tmp/yugabyte-local-cluster/node*/disk*/yb-data/tserver/data/rocksdb/table*/* | grep -v '0B'
  1. 20K /tmp/yugabyte-local-cluster/node-1/disk-1/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-439ae3bde90049d6812e198e76ad29a4
  2. 20K /tmp/yugabyte-local-cluster/node-1/disk-1/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-eecd01f0a7cd4537ba571bdb85d0c094
  3. 20K /tmp/yugabyte-local-cluster/node-1/disk-2/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-4ea334056a3845518cc6614baef96966
  4. 20K /tmp/yugabyte-local-cluster/node-1/disk-2/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-52642a3a9d7b4d38a103dff5dd77a3c6
  5. 20K /tmp/yugabyte-local-cluster/node-2/disk-1/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-4e31e26b3b204e34a1e0cfd6f7500525
  6. 20K /tmp/yugabyte-local-cluster/node-2/disk-1/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-b7ac08a983aa45a3843ab92b1719799a
  7. 20K /tmp/yugabyte-local-cluster/node-2/disk-2/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-22c349a07afb48e3844b570c24455431
  8. 20K /tmp/yugabyte-local-cluster/node-2/disk-2/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-8955db9e1ec841f3a30535b77d707586
  9. 20K /tmp/yugabyte-local-cluster/node-3/disk-1/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-adac9f92466b4d288a4ae346aaad3880
  10. 20K /tmp/yugabyte-local-cluster/node-3/disk-1/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-f04a6d5113a74ba79a04f01c80423ef5
  11. 20K /tmp/yugabyte-local-cluster/node-3/disk-2/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-1c472c1204fe40afbc7948dadce22be8
  12. 20K /tmp/yugabyte-local-cluster/node-3/disk-2/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-5aaeb96381044aa2b09ed9973830bb27

4. Insert/query the Cassandra table

Let us insert a key-value entry, with the value size around 2MB. Since the memstores are configured to be 1MB, this will cause the data to flush to disk immediately. Note that the key flags we pass to the sample app are:

  • —num_unique_keys 1 - Write exactly one key. Keys are numbers converted to text, and typically start from 0.
  • —num_threads_read 0 - Do not perform any reads (hence 0 read threads).
  • —num_threads_write 1 - Since we are not writing a lot of data, a single writer thread is sufficient.
  • —value_size 10000000 - Generate the value being written as a random byte string of around 10MB size.
  • —nouuid - Do not prefix a UUID to the key. A UUID allows multiple instances of the load tester to run without interfering with each other.

You can do this as shown below.

  1. $ java -jar java/yb-sample-apps.jar --workload CassandraKeyValue \
  2. --nodes 127.0.0.1:9042 \
  3. --nouuid \
  4. --num_unique_keys 1 \
  5. --num_writes 2 \
  6. --num_threads_read 0 \
  7. --num_threads_write 1 \
  8. --value_size 10000000
  1. 2018-02-05 07:33:33,525 [INFO|...] Num unique keys to insert: 1
  2. ...
  3. 2018-02-05 07:33:36,899 [INFO|...] The sample app has finished

Let us check what we have inserted using cqlsh.

  1. $ ./bin/cqlsh
  1. cqlsh> SELECT k FROM ybdemo_keyspace.cassandrakeyvalue;

  1. k

key:0

(1 rows)

Now let us check the sizes of the various tablets:

  1. $ du -hs /tmp/yugabyte-local-cluster/node*/disk*/yb-data/tserver/data/rocksdb/table*/* | grep -v '0B'
  1. 20K .../rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-439ae3bde90049d6812e198e76ad29a4
  2. 9.6M .../rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-eecd01f0a7cd4537ba571bdb85d0c094
  3. 20K .../rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-4ea334056a3845518cc6614baef96966
  4. ...

We see that the key has been written to one of the tablets, in the case of this experiment the UUID of the tablet is eecd01f0a7cd4537ba571bdb85d0c094. We can find out from the table details page which node this tablet belongs to - it is node-1 in this case. Here is the relevant screenshot.

Tablet ownership with auto-sharding

We can also easily confirm that the node-1 indeed has about 10MB of storage being used.

Inserting values with auto-sharding

5. Automatic sharding when add nodes

Let us add one more node to the universe for a total of 4 nodes, by running the following command.

  1. $ ./bin/yb-ctl add_node --tserver_flags "memstore_size_mb=1"

By looking at the tablet servers page, we find that the tablets are re-distributed evenly among the 4 nodes and each node now has 3 shards.

Auto sharding when adding one node

Next, let us add 2 more nodes to the universe, making it a total of 6 nodes. We can do this by running the following.

  1. $ ./bin/yb-ctl add_node --tserver_flags "memstore_size_mb=1"
  1. $ ./bin/yb-ctl add_node --tserver_flags "memstore_size_mb=1"

We can verify that the tablets are evenly distributed across the 6 nodes. Each node now has 2 tablets.

Auto sharding when adding three nodes

6. Clean up (optional)

Optionally, you can shutdown the local cluster created in Step 1.

  1. $ ./bin/yb-ctl destroy

1. Setup - create universe

If you have a previously running local universe, destroy it using the following.

  1. $ ./bin/yb-ctl destroy

Start a new local universe with a replication factor of 1 (rf=1). We are passing the following options/flags:

  • —replication_factor 1 This creates a universe with a replication factor of 1.
  • —num_shards_per_tserver 4 This option controls the total number of tablets (or partitions) when creating a new table. By making this number 4, we will end up creating 12 tablets on a 3 node cluster.
  • —tserver_flags "memstore_size_mb=1" This sets the total size of memstores on the tablet-servers to 1MB. We do this in order to force a flush of the data to disk when we insert a value more than 1MB, so that we can observe which tablets the data gets written to.

You can do this as shown below.

  1. $ ./bin/yb-ctl --replication_factor 1 --num_shards_per_tserver 4 create \
  2. --tserver_flags "memstore_size_mb=1"

The above command creates a universe with one node. Let us add 2 more nodes to make this a 3-node, rf=1 universe. We need to pass the memstore size flag to each new tserver we add. You can do that by running the following:

  1. $ ./bin/yb-ctl add_node --tserver_flags "memstore_size_mb=1"
  1. $ ./bin/yb-ctl add_node --tserver_flags "memstore_size_mb=1"

We can check the status of the cluster to confirm that we have 3 tservers.

  1. $ ./bin/yb-ctl status
  1. 2018-02-03 21:33:05,455 INFO: Server is running: type=master, node_id=1, PID=18967, admin service=http://127.0.0.1:7000
  2. 2018-02-03 21:33:05,477 INFO: Server is running: type=tserver, node_id=1, PID=18970, admin service=http://127.0.0.1:9000, cql service=127.0.0.1:9042, redis service=127.0.0.1:6379
  3. 2018-02-03 21:33:05,499 INFO: Server is running: type=tserver, node_id=2, PID=19299, admin service=http://127.0.0.2:9000, cql service=127.0.0.2:9042, redis service=127.0.0.2:6379
  4. 2018-02-03 21:33:05,523 INFO: Server is running: type=tserver, node_id=3, PID=19390, admin service=http://127.0.0.3:9000, cql service=127.0.0.3:9042, redis service=127.0.0.3:6379

2. Create a Cassandra table

Create a Cassandra table. The keyspace and table name below must created exactly as shown below, since we will be using the sample application to write data into this table.

  1. $ ./bin/cqlsh
  1. cqlsh> CREATE KEYSPACE ybdemo_keyspace;
  1. cqlsh> CREATE TABLE ybdemo_keyspace.cassandrakeyvalue (k text PRIMARY KEY, v blob);

For each table, we have instructed YugabyteDB to create 4 shards per tserver present in the universe. Since we have 3 nodes, we expect 12 tablets for the ybdemo_keyspace.cassandrakeyvalue table.

3. Explore tablets

  • The tablets are evenly balanced across the various nodes.

You can see the number of tablets per node in the Tablet Servers page of the master Admin UI, by going to the table details page. The page should look something like the image below.

Number of tablets in the Cassandra table

We see that each node has 4 tablets, and the total number of tablets is 12 as we expected.

  • The table has 12 tablets, each owning a range of the keyspace.

Let us navigate to the table details page to examine the various tablets. This page should look as follows.

Tablet details of the Cassandra table

What we see here is that there are 12 tablets as expected, and the key ranges owned by each tablet are shown. This page also shows which node that is currently hosting (and is the leader for) each of these tablets. Note here that the tablets balancing across nodes happens on a per-table basis, so that each table is scaled out to an appropriate number of nodes.

  • Each tablet has a separate directory dedicated to it for data.

Let us list out all the tablet directories and see their sizes. This can be done as follows.

  1. $ du -hs /tmp/yugabyte-local-cluster/node*/disk*/yb-data/tserver/data/rocksdb/table*/* | grep -v '0B'
  1. 20K /tmp/yugabyte-local-cluster/node-1/disk-1/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-439ae3bde90049d6812e198e76ad29a4
  2. 20K /tmp/yugabyte-local-cluster/node-1/disk-1/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-eecd01f0a7cd4537ba571bdb85d0c094
  3. 20K /tmp/yugabyte-local-cluster/node-1/disk-2/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-4ea334056a3845518cc6614baef96966
  4. 20K /tmp/yugabyte-local-cluster/node-1/disk-2/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-52642a3a9d7b4d38a103dff5dd77a3c6
  5. 20K /tmp/yugabyte-local-cluster/node-2/disk-1/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-4e31e26b3b204e34a1e0cfd6f7500525
  6. 20K /tmp/yugabyte-local-cluster/node-2/disk-1/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-b7ac08a983aa45a3843ab92b1719799a
  7. 20K /tmp/yugabyte-local-cluster/node-2/disk-2/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-22c349a07afb48e3844b570c24455431
  8. 20K /tmp/yugabyte-local-cluster/node-2/disk-2/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-8955db9e1ec841f3a30535b77d707586
  9. 20K /tmp/yugabyte-local-cluster/node-3/disk-1/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-adac9f92466b4d288a4ae346aaad3880
  10. 20K /tmp/yugabyte-local-cluster/node-3/disk-1/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-f04a6d5113a74ba79a04f01c80423ef5
  11. 20K /tmp/yugabyte-local-cluster/node-3/disk-2/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-1c472c1204fe40afbc7948dadce22be8
  12. 20K /tmp/yugabyte-local-cluster/node-3/disk-2/yb-data/tserver/data/rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-5aaeb96381044aa2b09ed9973830bb27

4. Insert/query the Cassandra table

Let us insert a key-value entry, with the value size around 2MB. Since the memstores are configured to be 1MB, this will cause the data to flush to disk immediately. Note that the key flags we pass to the sample app are:

  • —num_unique_keys 1 - Write exactly one key. Keys are numbers converted to text, and typically start from 0.
  • —num_threads_read 0 - Do not perform any reads (hence 0 read threads).
  • —num_threads_write 1 - Since we are not writing a lot of data, a single writer thread is sufficient.
  • —value_size 10000000 - Generate the value being written as a random byte string of around 10MB size.
  • —nouuid - Do not prefix a UUID to the key. A UUID allows multiple instances of the load tester to run without interfering with each other.

You can do this as shown below.

  1. $ java -jar java/yb-sample-apps.jar --workload CassandraKeyValue \
  2. --nodes 127.0.0.1:9042 \
  3. --nouuid \
  4. --num_unique_keys 1 \
  5. --num_writes 2 \
  6. --num_threads_read 0 \
  7. --num_threads_write 1 \
  8. --value_size 10000000
  1. 2018-02-05 07:33:33,525 [INFO|...] Num unique keys to insert: 1
  2. ...
  3. 2018-02-05 07:33:36,899 [INFO|...] The sample app has finished

Let us check what we have inserted using cqlsh.

  1. $ ./bin/cqlsh
  1. cqlsh> SELECT k FROM ybdemo_keyspace.cassandrakeyvalue;

  1. k

key:0

(1 rows)

Now let us check the sizes of the various tablets:

  1. $ du -hs /tmp/yugabyte-local-cluster/node*/disk*/yb-data/tserver/data/rocksdb/table*/* | grep -v '0B'
  1. 20K .../rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-439ae3bde90049d6812e198e76ad29a4
  2. 9.6M .../rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-eecd01f0a7cd4537ba571bdb85d0c094
  3. 20K .../rocksdb/table-9987797012ce4c1c91782c25e7608c34/tablet-4ea334056a3845518cc6614baef96966
  4. ...

We see that the key has been written to one of the tablets, in the case of this experiment the UUID of the tablet is eecd01f0a7cd4537ba571bdb85d0c094. We can find out from the table details page which node this tablet belongs to - it is node-1 in this case. Here is the relevant screenshot.

Tablet ownership with auto-sharding

We can also easily confirm that the node-1 indeed has about 10MB of storage being used.

Inserting values with auto-sharding

5. Automatic sharding when add nodes

Let us add one more node to the universe for a total of 4 nodes, by running the following command.

  1. $ ./bin/yb-ctl add_node --tserver_flags "memstore_size_mb=1"

By looking at the tablet servers page, we find that the tablets are re-distributed evenly among the 4 nodes and each node now has 3 shards.

Auto sharding when adding one node

Next, let us add 2 more nodes to the universe, making it a total of 6 nodes. We can do this by running the following.

  1. $ ./bin/yb-ctl add_node --tserver_flags "memstore_size_mb=1"
  1. $ ./bin/yb-ctl add_node --tserver_flags "memstore_size_mb=1"

We can verify that the tablets are evenly distributed across the 6 nodes. Each node now has 2 tablets.

Auto sharding when adding three nodes

6. Clean up (optional)

Optionally, you can shutdown the local cluster created in Step 1.

  1. $ ./bin/yb-ctl destroy