3D Effect:RimLight

This article will demonstrate how to write a shader (Cocos Effect) that can be used in Cocos for 3D model rendering by implementing a RimLight effect.

RimLight is a technique that makes objects more vivid by making their edges emitting.

RimLight is an application of the Fresnel phenomenon 1, a simple and efficient shader for enhancing rendering by calculating the magnitude of the angle between the object normals and the view direction, and adjusting the position and color of the light emitted.

In the calculation of rim-light, the greater the angle between the line of sight and the normal, the more pronounced the fringe light is.

rimlight preview

Material and effect creation

First refer to the Effect asset to create a new shader named rimlight.effect and create a material rimlight.mtl that uses that shader.

create rimlight

CCEffect

Cocos Effect uses YAML as a parser, so CCEffect needs to be written in a way that adheres to the YAML syntax standard, for which you can refer to YAML 101.

In this example, the semi-transparent effect will not be considered for the time being, and the transparent part can be removed at this point.

  1. # Delete the following sections
  2. - name: transparent
  3. passes:
  4. - vert: general-vs:vert # builtin header
  5. frag: rimlight-fs:frag
  6. blendState:
  7. targets:
  8. - blend: true
  9. blendSrc: src_alpha
  10. blendDst: one_minus_src_alpha
  11. blendSrcAlpha: src_alpha
  12. blendDstAlpha: one_minus_src_alpha
  13. properties: *props

Modify the frag function in the opaque section to: rimlight-fs:frag, which is the slice shader part of the edge light to be implemented next.

  1. - name: opaque
  2. passes:
  3. - vert: general-vs:vert # builtin header
  4. frag: rimlight-fs:frag

To make it easier to adjust the color of the rim light, add an attribute rimLightColor for adjusting the color of the rim light, and since translucency is not considered, only the RGB channel of this color is used.

  1. rimLightColor: { value: [1.0, 1.0, 1.0], # default values of RGB
  2. target: rimColor.rgb, # Bind to the RGB channel of Uniform rimColor
  3. editor: { # Style definition in material's property inspector
  4. displayName: Rim Color, # Show Rim Color as display name
  5. type: color } } # The type of this field is a color value

The CCEffect code is as follows:

  1. CCEffect %{
  2. techniques:
  3. - name: opaque
  4. passes:
  5. - vert: general-vs:vert # builtin header
  6. frag: rimlight-fs:frag
  7. properties: &props
  8. mainTexture: { value: white }
  9. mainColor: { value: [1, 1, 1, 1], editor: { type: color } }
  10. # Rim Light's colors, which depend only on the components of the three RGB channels
  11. rimLightColor: { value: [1.0, 1.0, 1.0], target: rimColor.rgb, editor: { displayName: Rim Color, type: color } }
  12. }%

Note: The corresponding rimColor field needs to be added to the uniform Constant of the fragment shader.

  1. uniform Constant {
  2. vec4 mainColor;
  3. vec4 rimColor;
  4. };

This binding means that the values of the RGB component of the shader’s rimLightColor are transferred through the engine to the rgb three components of the Uniform rimColor.

Note: The engine specifies that vectors of type vec3 cannot be used to avoid implict padding, so when using a 3-dimensional vector (vec3), you can choose to use a 4-dimensional vector (vec4) instead. Don’t worry, the alpha channel will be utilized without being wasted.

Vertex shader

Usually the engine’s built-in vertex shader can meet most of the development needs, so the engine’s built-in vertex shader can be used directly.

  1. - vert: general-vs:vert # builtin header

Fragment shader

Modify the fragment shader code in the shader created via Assets panel by changing CCProgram unlit-fs to CCProgram rimlight-fs.

Before modification:

  1. CCProgram unlit-fs %{
  2. precision highp float;
  3. ...
  4. }%

After modification:

  1. CCProgram rimlight-fs %{
  2. precision highp float;
  3. ...
  4. }%

In lighting calculations, it is usually necessary to calculate the angle between the normal and the line of sight, which is closely related to the camera position.

view-direction

As shown above, to calculate the line of sight, you need to subtract the position of the object from the camera position. Within the shader, to get the camera position, you need to use cc_cameraPos in Built-in Shader Uniforms, which is stored inside the cc-global shader fragment. This uniform is stored in the cc-global shader fragment via include keyword, the entire shader fragment can be easily introduced.

  1. #include <builtin/uniforms/cc-global> // Include Cocos Creator built-in global uniforms

Now the fragment shader is as follows:

  1. CCProgram rimlight-fs %{
  2. precision highp float;
  3. #include <builtin/uniforms/cc-global> // Include Cocos Creator built-in global uniforms
  4. #include <legacy/output>
  5. #include <legacy/cc-fog-fs>
  6. ...
  7. }

The view direction is calculated by subtracting the current camera position (cc_cameraPos) from the position information passed in by the vertex shader within the slice shader in vec3 v_position.

  1. vec3 viewDirection = cc_cameraPos.xyz - v_position; // Caculate the view direcion

We don’t care about the length of the view vector, so we get viewDirection and normalize it with the normalize method.

  1. vec3 normalizedViewDirection = normalize(viewDirection); // Normalize the view direciton

The xyz component of cc_cameraPos represents the position of the camera.

The fragment shader code is as follows:

  1. vec4 frag(){
  2. vec3 viewDirection = cc_cameraPos.xyz - v_position; // Calculate the view direciton
  3. vec3 normalizedViewDirection = normalize(viewDirection); // Normalize view direction
  4. vec4 col = mainColor * texture(mainTexture, v_uv); // Calculate the final color
  5. CC_APPLY_FOG(col, v_position);
  6. return CCFragOutput(col);
  7. }

Next, you need to calculate the angle between the normal and the view direction. Since the built-in standard vertex shader general-vs:vert is used, the normal has been passed from the vertex shader to the fragment shader, but is not declared.

The following code demonstrates how to declare normals:

  1. in vec3 v_normal;

The fragment shader code at this point is as follows:

  1. CCProgram rimlight-fs %{
  2. precision highp float;
  3. #include <builtin/uniforms/cc-global>
  4. #include <legacy/output>
  5. #include <legacy/cc-fog-fs>
  6. in vec2 v_uv;
  7. in vec3 v_normal;
  8. in vec3 v_position;
  9. ....
  10. }

The normal is no longer in a normalized state due to the interpolation of the pipeline, so it needs to be normalized, using the normalize function to do so.

  1. vec3 normal = normalize(v_normal); // Renormalize the normals.

The code of the fragment shader at this point is as follows:

  1. vec4 frag(){
  2. vec3 normal = normalize(v_normal); // Renormalize the normals.
  3. vec3 viewDirection = cc_cameraPos.xyz - v_position; // Calculate the view direction
  4. vec3 normalizedViewDirection = normalize(viewDirection); // Normalization of the view direction
  5. vec4 col = mainColor * texture(mainTexture, v_uv); // Calculate the final color
  6. CC_APPLY_FOG(col, v_position);
  7. return CCFragOutput(col);
  8. }

At this point, the angle between the normal and the view direction can be calculated. Inside linear algebra, the dot product is expressed as the cosine of the modulus of two vectors multiplied by the angle.

  1. a·b = |a|*|b|*cos(θ)

A simple exchange law leads to.

  1. cos(θ) = a·b /(|a|*|b|)

Since the normal and view directions are normalized, they are modulo 1 and the result of the dot product is expressed as the cos values of the normal and view directions.

  1. cos(θ) = a·b

Translate this into code as follows:

  1. dot(normal, normalizedViewDirection)

Note that the dot product may be calculated to be less than 0, while the color is positive, and is bounded in the range [0, 1] by the max function.

  1. max(dot(normal, normalizedViewDirection), 0.0)

In this case, the RimLight color can be adjusted according to the result of the dot product:

  1. float rimPower = max(dot(normal, normalizedViewDirection), 0.0);// Calculating the intensity in RimLight
  2. vec4 col = mainColor * texture(mainTexture, v_uv); // Calculate the final color
  3. col.rgb += rimPower * rimColor.rgb; // Increase rim-light

The fragment shader code is as follows:

  1. vec4 frag(){
  2. vec3 normal = normalize(v_normal);// 重新归一化法线。
  3. vec3 viewDirection = cc_cameraPos.xyz - v_position; // 计算视线的方向
  4. vec3 normalizedViewDirection = normalize(viewDirection); // 对视线方向进行归一化
  5. float rimPower = max(dot(normal, normalizedViewDirection), 0.0); // 计算 RimLight 的亮度
  6. vec4 col = mainColor * texture(mainTexture, v_uv); // 计算最终的颜色
  7. col.rgb += rimPower * rimColor.rgb; // 增加边缘光
  8. CC_APPLY_FOG(col, v_position);
  9. return CCFragOutput(col);
  10. }

t can be observed that the center of the object is brighter than the edges because the angle between the normal of the edge vertex and the angle of view is larger and the cosine value obtained is smaller.

Note: If you cannot observe the effect in this step, you can adjust MainColor so that it is not white. This is because the default MainColor color is white, covering up the color of the edge light.

dot result

To adjust this result by simply subtracting the result of the dot product by 1, delete the following code.

float rimPower = max(dot(normal, normalizedViewDirection), 0.0);

And add the following code:

  1. float rimPower = 1.0 - max(dot(normal, normalizedViewDirection), 0.0);

The fragment shader code is as follows:

  1. vec4 frag(){
  2. vec3 normal = normalize(v_normal); // Renormalize the normals.
  3. vec3 viewDirection = cc_cameraPos.xyz - v_position; // Calculate the view direction
  4. vec3 normalizedViewDirection = normalize(viewDirection); // Normalize the view direction
  5. float rimPower = 1.0 - max(dot(normal, normalizedViewDirection), 0.0);
  6. vec4 col = mainColor * texture(mainTexture, v_uv); // Calculate the final color
  7. col.rgb += rimPower * rimColor.rgb; // Add rim-light
  8. CC_APPLY_FOG(col, v_position);
  9. return CCFragOutput(col);
  10. }

one minus dot result

Although the edge light effect can be observed, the light is too strong and not easily adjustable. An adjustable parameter rimIntensity can be added to the CCEffect. Since the alpha component of rimColor was not used before, borrowing this component for binding saves additional Uniform.

Note: When writing shaders, you need to avoid implict padding, for this see: UBO memory layout, where using the unused alpha channel to store the intensity of the edge light maximizes the use of the rimColor field.

Add the following code to CCEffect.

  1. rimInstensity: { value: 1.0, # Default value is 1
  2. target: rimColor.a, # Bind to the alpha channel of ‘rimColor’
  3. editor: { # The style of the property inspector
  4. slide: true, # Use the slider as the display style
  5. range: [0, 10], # The range of values for the slider
  6. step: 0.1 } # Value change each time the adjustment button is clicked

The CCEffect code at this point is as follows:

  1. CCEffect %{
  2. techniques:
  3. - name: opaque
  4. passes:
  5. - vert: general-vs:vert # builtin header
  6. frag: rimlight-fs:frag
  7. properties: &props
  8. mainTexture: { value: white }
  9. mainColor: { value: [1, 1, 1, 1], editor: { type: color } }
  10. # Rim Light's colors, which depend only on the components of the three rgb channels
  11. rimLightColor: { value: [1.0, 1.0, 1.0], target: rimColor.rgb, editor: { displayName: Rim Color, type: color } }
  12. # The alpha channel of rimLightColor is not used and is reused to describe the intensity of rimLightColor.
  13. rimInstensity: { value: 1.0, target: rimColor.a, editor: {slide: true, range: [0, 10], step: 0.1}}
  14. }%

Adding this property will add an adjustable RimIntensity to the material Inspector panel.

intensity

The pow function adjusts the edge light so that its range does not vary linearly, which can reflect a better effect, by removing the following code.

col.rgb += rimPower * rimColor.rgb;

Add the following codes:

  1. float rimInstensity = rimColor.a; // alpha channel is the index of brightness
  2. col.rgb += pow(rimPower, rimInstensity) * rimColor.rgb; // Exponential modification of dot product using 'pow' function

pow is a built-in GLSL function of the form pow(x, p), which represents an exponential function with x as the base and p as the exponent.

The final fragment shader code is as follows:

  1. vec4 frag(){
  2. vec3 normal = normalize(v_normal); // Renormalize the normals
  3. vec3 viewDirection = cc_cameraPos.xyz - v_position; // Caculate the view direction
  4. vec3 normalizedViewDirection = normalize(viewDirection); // Normalize the view direction
  5. float rimPower = 1.0 - max(dot(normal, normalizedViewDirection), 0.0);// Caculate the intensisty of rim-light
  6. vec4 col = mainColor * texture(mainTexture, v_uv); // Caculate the final color
  7. float rimInstensity = rimColor.a; // alpha channel is the index of brightness
  8. col.rgb += pow(rimPower, rimInstensity) * rimColor.rgb; // Add rim-light
  9. CC_APPLY_FOG(col, v_position);
  10. return CCFragOutput(col);
  11. }

Afterwards, change the value of rimIntensity on the material Inspector panel to 3.

intensity

More natural edge lighting can be observed at this point.

changed preview

The color and intensity of the rim light can be easily adjusted with Rim Color and rimIntensity.

color

result

The complete shader code is as follows:

  1. CCEffect %{
  2. techniques:
  3. - name: opaque
  4. passes:
  5. - vert: general-vs:vert # builtin header
  6. frag: rimlight-fs:frag
  7. properties: &props
  8. mainTexture: { value: white }
  9. mainColor: { value: [1, 1, 1, 1], editor: { type: color } }
  10. # Rim Light's colors, which depend only on the components of the three rgb channels
  11. rimLightColor: { value: [1.0, 1.0, 1.0], target: rimColor.rgb, editor: { displayName: Rim Color, type: color } }
  12. # The alpha channel of rimLightColor is not used and is reused to describe the intensity of rimLightColor.
  13. rimInstensity: { value: 1.0, target: rimColor.a, editor: {slide: true, range: [0, 10], step: 0.1}}
  14. }%
  15. CCProgram rimlight-fs %{
  16. precision highp float;
  17. #include <builtin/uniforms/cc-global>
  18. #include <legacy/output>
  19. #include <legacy/cc-fog-fs>
  20. in vec2 v_uv;
  21. in vec3 v_normal;
  22. in vec3 v_position;
  23. uniform sampler2D mainTexture;
  24. uniform Constant {
  25. vec4 mainColor;
  26. vec4 rimColor;
  27. };
  28. vec4 frag(){
  29. vec3 normal = normalize(v_normal); // Renormalize the normals.
  30. vec3 viewDirection = cc_cameraPos.xyz - v_position; // Caculate view direction
  31. vec3 normalizedViewDirection = normalize(viewDirection); // Normalize view direction
  32. float rimPower = 1.0 - max(dot(normal, normalizedViewDirection), 0.0);// Caculte the intensity of rim light
  33. vec4 col = mainColor * texture(mainTexture, v_uv); // Caculate the final color
  34. float rimInstensity = rimColor.a; // alpha channel is the index of brightness
  35. col.rgb += pow(rimPower, rimInstensity) * rimColor.rgb; // Add rim light
  36. CC_APPLY_FOG(col, v_position);
  37. return CCFragOutput(col);
  38. }
  39. }%

To make the color of the edge light affected by the texture color, the following code can be used.

Change the following code:

  1. col.rgb += pow(rimPower, rimInstensity) * rimColor.rgb; // Add rim light

To:

  1. col.rgb *= 1.0 + pow(rimPower, rimInstensity) * rimColor.rgb; // The rim light is influenced by the object coloring

The rim light is then influenced by the final texture and vertex color.

color

  1. Fresnel phenomenon: Augustin-Jean Fresnel was a famous French physicist in the 18th century, who proposed the Fresnel equation to explain the relationship between reflection and refraction of light very well. If you go to observe the calm water surface under the sunlight you can find that the further away from the observation point the stronger the reflection of the water surface, this phenomenon that the intensity of light changes with the angle of observation is known as Fresnel’s phenomenon.
    fresnel