Configure Minimum and Maximum CPU Constraints for a Namespace

This page shows how to set minimum and maximum values for the CPU resources used by Containers and Pods in a namespace. You specify minimum and maximum CPU values in a LimitRange object. If a Pod does not meet the constraints imposed by the LimitRange, it cannot be created in the namespace.

Before you begin

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

To check the version, enter kubectl version.

Your cluster must have at least 1 CPU available for use to run the task examples.

Create a namespace

Create a namespace so that the resources you create in this exercise are isolated from the rest of your cluster.

  1. kubectl create namespace constraints-cpu-example

Create a LimitRange and a Pod

Here’s the configuration file for a LimitRange:

admin/resource/cpu-constraints.yaml Configure Minimum and Maximum CPU Constraints for a Namespace - 图1

  1. apiVersion: v1
  2. kind: LimitRange
  3. metadata:
  4. name: cpu-min-max-demo-lr
  5. spec:
  6. limits:
  7. - max:
  8. cpu: "800m"
  9. min:
  10. cpu: "200m"
  11. type: Container

Create the LimitRange:

  1. kubectl apply -f https://k8s.io/examples/admin/resource/cpu-constraints.yaml --namespace=constraints-cpu-example

View detailed information about the LimitRange:

  1. kubectl get limitrange cpu-min-max-demo-lr --output=yaml --namespace=constraints-cpu-example

The output shows the minimum and maximum CPU constraints as expected. But notice that even though you didn’t specify default values in the configuration file for the LimitRange, they were created automatically.

  1. limits:
  2. - default:
  3. cpu: 800m
  4. defaultRequest:
  5. cpu: 800m
  6. max:
  7. cpu: 800m
  8. min:
  9. cpu: 200m
  10. type: Container

Now whenever a Container is created in the constraints-cpu-example namespace, Kubernetes performs these steps:

  • If the Container does not specify its own CPU request and limit, assign the default CPU request and limit to the Container.

  • Verify that the Container specifies a CPU request that is greater than or equal to 200 millicpu.

  • Verify that the Container specifies a CPU limit that is less than or equal to 800 millicpu.

Note: When creating a LimitRange object, you can specify limits on huge-pages or GPUs as well. However, when both default and defaultRequest are specified on these resources, the two values must be the same.

Here’s the configuration file for a Pod that has one Container. The Container manifest specifies a CPU request of 500 millicpu and a CPU limit of 800 millicpu. These satisfy the minimum and maximum CPU constraints imposed by the LimitRange.

admin/resource/cpu-constraints-pod.yaml Configure Minimum and Maximum CPU Constraints for a Namespace - 图2

  1. apiVersion: v1
  2. kind: Pod
  3. metadata:
  4. name: constraints-cpu-demo
  5. spec:
  6. containers:
  7. - name: constraints-cpu-demo-ctr
  8. image: nginx
  9. resources:
  10. limits:
  11. cpu: "800m"
  12. requests:
  13. cpu: "500m"

Create the Pod:

  1. kubectl apply -f https://k8s.io/examples/admin/resource/cpu-constraints-pod.yaml --namespace=constraints-cpu-example

Verify that the Pod’s Container is running:

  1. kubectl get pod constraints-cpu-demo --namespace=constraints-cpu-example

View detailed information about the Pod:

  1. kubectl get pod constraints-cpu-demo --output=yaml --namespace=constraints-cpu-example

The output shows that the Container has a CPU request of 500 millicpu and CPU limit of 800 millicpu. These satisfy the constraints imposed by the LimitRange.

  1. resources:
  2. limits:
  3. cpu: 800m
  4. requests:
  5. cpu: 500m

Delete the Pod

  1. kubectl delete pod constraints-cpu-demo --namespace=constraints-cpu-example

Attempt to create a Pod that exceeds the maximum CPU constraint

Here’s the configuration file for a Pod that has one Container. The Container specifies a CPU request of 500 millicpu and a cpu limit of 1.5 cpu.

admin/resource/cpu-constraints-pod-2.yaml Configure Minimum and Maximum CPU Constraints for a Namespace - 图3

  1. apiVersion: v1
  2. kind: Pod
  3. metadata:
  4. name: constraints-cpu-demo-2
  5. spec:
  6. containers:
  7. - name: constraints-cpu-demo-2-ctr
  8. image: nginx
  9. resources:
  10. limits:
  11. cpu: "1.5"
  12. requests:
  13. cpu: "500m"

Attempt to create the Pod:

  1. kubectl apply -f https://k8s.io/examples/admin/resource/cpu-constraints-pod-2.yaml --namespace=constraints-cpu-example

The output shows that the Pod does not get created, because the Container specifies a CPU limit that is too large:

  1. Error from server (Forbidden): error when creating "examples/admin/resource/cpu-constraints-pod-2.yaml":
  2. pods "constraints-cpu-demo-2" is forbidden: maximum cpu usage per Container is 800m, but limit is 1500m.

Attempt to create a Pod that does not meet the minimum CPU request

Here’s the configuration file for a Pod that has one Container. The Container specifies a CPU request of 100 millicpu and a CPU limit of 800 millicpu.

admin/resource/cpu-constraints-pod-3.yaml Configure Minimum and Maximum CPU Constraints for a Namespace - 图4

  1. apiVersion: v1
  2. kind: Pod
  3. metadata:
  4. name: constraints-cpu-demo-3
  5. spec:
  6. containers:
  7. - name: constraints-cpu-demo-3-ctr
  8. image: nginx
  9. resources:
  10. limits:
  11. cpu: "800m"
  12. requests:
  13. cpu: "100m"

Attempt to create the Pod:

  1. kubectl apply -f https://k8s.io/examples/admin/resource/cpu-constraints-pod-3.yaml --namespace=constraints-cpu-example

The output shows that the Pod does not get created, because the Container specifies a CPU request that is too small:

  1. Error from server (Forbidden): error when creating "examples/admin/resource/cpu-constraints-pod-3.yaml":
  2. pods "constraints-cpu-demo-3" is forbidden: minimum cpu usage per Container is 200m, but request is 100m.

Create a Pod that does not specify any CPU request or limit

Here’s the configuration file for a Pod that has one Container. The Container does not specify a CPU request, and it does not specify a CPU limit.

admin/resource/cpu-constraints-pod-4.yaml Configure Minimum and Maximum CPU Constraints for a Namespace - 图5

  1. apiVersion: v1
  2. kind: Pod
  3. metadata:
  4. name: constraints-cpu-demo-4
  5. spec:
  6. containers:
  7. - name: constraints-cpu-demo-4-ctr
  8. image: vish/stress

Create the Pod:

  1. kubectl apply -f https://k8s.io/examples/admin/resource/cpu-constraints-pod-4.yaml --namespace=constraints-cpu-example

View detailed information about the Pod:

  1. kubectl get pod constraints-cpu-demo-4 --namespace=constraints-cpu-example --output=yaml

The output shows that the Pod’s Container has a CPU request of 800 millicpu and a CPU limit of 800 millicpu. How did the Container get those values?

  1. resources:
  2. limits:
  3. cpu: 800m
  4. requests:
  5. cpu: 800m

Because your Container did not specify its own CPU request and limit, it was given the default CPU request and limit from the LimitRange.

At this point, your Container might be running or it might not be running. Recall that a prerequisite for this task is that your cluster must have at least 1 CPU available for use. If each of your Nodes has only 1 CPU, then there might not be enough allocatable CPU on any Node to accommodate a request of 800 millicpu. If you happen to be using Nodes with 2 CPU, then you probably have enough CPU to accommodate the 800 millicpu request.

Delete your Pod:

  1. kubectl delete pod constraints-cpu-demo-4 --namespace=constraints-cpu-example

Enforcement of minimum and maximum CPU constraints

The maximum and minimum CPU constraints imposed on a namespace by a LimitRange are enforced only when a Pod is created or updated. If you change the LimitRange, it does not affect Pods that were created previously.

Motivation for minimum and maximum CPU constraints

As a cluster administrator, you might want to impose restrictions on the CPU resources that Pods can use. For example:

  • Each Node in a cluster has 2 CPU. You do not want to accept any Pod that requests more than 2 CPU, because no Node in the cluster can support the request.

  • A cluster is shared by your production and development departments. You want to allow production workloads to consume up to 3 CPU, but you want development workloads to be limited to 1 CPU. You create separate namespaces for production and development, and you apply CPU constraints to each namespace.

Clean up

Delete your namespace:

  1. kubectl delete namespace constraints-cpu-example

What’s next

For cluster administrators

For app developers