From: eLinux.org

SBC3530

EMA
SBC3530——http://www.ema-tech.com

Contents

• 1 EMA SBC3530
  • 1.1 Overview
  • 1.2 Specifications
    • 1.2.1 Hardware
    • 1.2.2 Operating conditions

EMA SBC3530

EMA SBC3530

Overview

1.SBC3530 from
EMA is a Low-power, high-performance single
board computer based on TI’s
OMAP35x
multimedia applications processor. Designed with EPIC Standard and
extendable architecture .
SBC3530 helps
users leverage the benefits of
OMAP35x
processor comprising of advanced Superscalar ARM Cortex-A8 RISC core
with NEON co-processing, IVA2.2 subsystem with a C64x+ digital signal
processor (DSP) core and SGX subsystem for 2D and 3D graphics
acceleration (PowerVR).
2.The SBC3530
helps users building their products around the
OMAP35x
enjoy the benefits of faster user interfaces, faster data access and
multi-standard encode/decode. Resolution up to 1920 * 1080, Supports
multiple display output, such as VGA, LCD, S-Video and AV composite
video output. Supports multi-standard encode/decode at D4
(1280×720p/60Hz) 30 fps. Supports multiple embedded operation system,
such as Android, Embedded Linux, WinCE. Supports 4-channel video input,
maximum support 4-way CVBS. Built-in hardware encryption and hardware
authentication mechanism to better protect the user’s application
software.
3.SBC3530 comes
with X-Loader、U-Boot、Linux Kernel（V2.6.30） and JFFS2 File system for
Linux. The PSP Software Release from
TI
includes the Code Sourcery tool chain and the required source code and
utilities.
4.It is an ideal platform for users to develop their
applications.Present
SBC3530 has been
applied to mobile Internet devices, Global Positioning System (GPS),
2D/3D Game Station, medical equipment, Image Capture Machine, HMI, etc.

Specifications

Hardware

CPU

TI OMAP3530 Multi-Core CPU

uperscalar ARM Cortex-A8 RISC core NEON™ SIMD co-processing 430MHz
TMS320 C64x+ (DSP) core POWERVR SG™ 2D/3D graphics acceleration

RAM

128MByte/256MByte/512MByte DDR

Flash

128MByte/256MByte/512MByte/1GByte Nand Flash

Ethernet

1x 10M/100M High performance Ethernet, RJ45 interface

COM Port

1x RS232(5 Lines: TX,RX,CTS,RTS,GND)

2x 3.3V UART(5 Lines: TX,RX,CTS,RTS,GND)

USB Host

4x USB 2.0 high speed host(each provide 500mA current)

USB OTG

1x USB 2.0 high speed OTG（Device option）

Audio

1x 3.5mm stereo audio phone jack

1x 3.5mm microphone jac

VGA

Standard VGA, support all VESA standard resolution

AV/S-Video Video Output

Support mode list：

NTSC-J, M

PAL-B, D, G, H, I

PAL-M

CGMS-A

Video Input

4 channel video input

Support up to:

4 CVBS

Or 1 CVBS + 1 YPbPr/RGB(embedded sync)

Or 1 CVBS + 1 YPbPr/RGB(embedded sync)

Or 2 CVBS + 1 S-Video

Or 2 S-Video

CVBS supports NTSC/PAL/SECAM

SD Slot

MMC/SD/SDIO/SDHC slot, support up to 32GByte

FRAM

64KBit high speed F-RAM with virtually unlimited writing cycle

Security

Hardware security-dog for hardware & software protection

RTC

CR1220 RTC battery socket

Button

1x Side button (user interrupt)

1x Reset button (inside)

1x PowerON button (inside)

LED

2x Power LED

2x Power management unit LED

2x GPIO LED

Boot switch

1x 6Bit boot mode switch

Power

1x 5V 4A DC Jack

1x 5V 4A TJC3 connector

1x Battery module connector

1x Power management signal connector

Expansion connectors

1x 3.3V I2C port

1x 3.3V LCD interface with touch screen support

1x 1.8V SPI port

1x 1.8V SDIO expansion for WIFI module

1x 1.8V 6x6 scanning keypad connector

1x 1.8V GPIO expansion

1x 1.8V GPMC High speed bus expansion

1x 1.8V Digital camera interface

Operating conditions

Mark 1：The value is the average detected in the condition that CPU
running at full speed in 600MHz working condition, other circuit in a
working conditon, and does not access other modules, USB interface don’t
in working condition.
Mark 2：The value is the average detected in the condition that 4 USB
interface supply Power, and the board connected to the LCD module,
digital camera, WIFI and other cases, etc.

Loading…

Categories:

• Linux
• OMAP
• Development
  Boards