Performing and configuring basic builds

The following sections provide instructions for basic build operations, including starting and canceling builds, editing BuildConfigs, deleting BuildConfigs, viewing build details, and accessing build logs.

Starting a build

You can manually start a new build from an existing build configuration in your current project.

Procedure

To manually start a build, enter the following command:

  1. $ oc start-build <buildconfig_name>

Re-running a build

You can manually re-run a build using the --from-build flag.

Procedure

  • To manually re-run a build, enter the following command:

    1. $ oc start-build --from-build=<build_name>

Streaming build logs

You can specify the --follow flag to stream the build’s logs in stdout.

Procedure

  • To manually stream a build’s logs in stdout, enter the following command:

    1. $ oc start-build <buildconfig_name> --follow

Setting environment variables when starting a build

You can specify the --env flag to set any desired environment variable for the build.

Procedure

  • To specify a desired environment variable, enter the following command:

    1. $ oc start-build <buildconfig_name> --env=<key>=<value>

Starting a build with source

Rather than relying on a Git source pull or a Dockerfile for a build, you can also start a build by directly pushing your source, which could be the contents of a Git or SVN working directory, a set of pre-built binary artifacts you want to deploy, or a single file. This can be done by specifying one of the following options for the start-build command:

OptionDescription

—from-dir=<directory>

Specifies a directory that will be archived and used as a binary input for the build.

—from-file=<file>

Specifies a single file that will be the only file in the build source. The file is placed in the root of an empty directory with the same file name as the original file provided.

—from-repo=<local_source_repo>

Specifies a path to a local repository to use as the binary input for a build. Add the —commit option to control which branch, tag, or commit is used for the build.

When passing any of these options directly to the build, the contents are streamed to the build and override the current build source settings.

Builds triggered from binary input will not preserve the source on the server, so rebuilds triggered by base image changes will use the source specified in the build configuration.

Procedure

  • Start a build from a source using the following command to send the contents of a local Git repository as an archive from the tag v2:

    1. $ oc start-build hello-world --from-repo=../hello-world --commit=v2

Canceling a build

You can cancel a build using the web console, or with the following CLI command.

Procedure

  • To manually cancel a build, enter the following command:

    1. $ oc cancel-build <build_name>

Canceling multiple builds

You can cancel multiple builds with the following CLI command.

Procedure

  • To manually cancel multiple builds, enter the following command:

    1. $ oc cancel-build <build1_name> <build2_name> <build3_name>

Canceling all builds

You can cancel all builds from the build configuration with the following CLI command.

Procedure

  • To cancel all builds, enter the following command:

    1. $ oc cancel-build bc/<buildconfig_name>

Canceling all builds in a given state

You can cancel all builds in a given state, such as new or pending, while ignoring the builds in other states.

Procedure

  • To cancel all in a given state, enter the following command:

    1. $ oc cancel-build bc/<buildconfig_name>

Editing a BuildConfig

To edit your build configurations, you use the Edit BuildConfig option in the Builds view of the Developer perspective.

You can use either of the following views to edit a BuildConfig:

  • The Form view enables you to edit your BuildConfig using the standard form fields and checkboxes.

  • The YAML view enables you to edit your BuildConfig with full control over the operations.

You can switch between the Form view and YAML view without losing any data. The data in the Form view is transferred to the YAML view and vice versa.

Procedure

  1. In the Builds view of the Developer perspective, click the menu kebab to see the Edit BuildConfig option.

  2. Click Edit BuildConfig to see the Form view option.

  3. In the Git section, enter the Git repository URL for the codebase you want to use to create an application. The URL is then validated.

    • Optional: Click Show Advanced Git Options to add details such as:

      • Git Reference to specify a branch, tag, or commit that contains code you want to use to build the application.

      • Context Dir to specify the subdirectory that contains code you want to use to build the application.

      • Source Secret to create a Secret Name with credentials for pulling your source code from a private repository.

  1. In the Build from section, select the option that you would like to build from. You can use the following options:

    • Image Stream tag references an image for a given image stream and tag. Enter the project, image stream, and tag of the location you would like to build from and push to.

    • Image Stream image references an image for a given image stream and image name. Enter the image stream image you would like to build from. Also enter the project, image stream, and tag to push to.

    • Docker image: The Docker image is referenced through a Docker image repository. You will also need to enter the project, image stream, and tag to refer to where you would like to push to.

  2. Optional: In the Environment Variables section, add the environment variables associated with the project by using the Name and Value fields. To add more environment variables, use Add Value, or Add from ConfigMap and Secret .

  3. Optional: To further customize your application, use the following advanced options:

    Trigger

    Triggers a new image build when the builder image changes. Add more triggers by clicking Add Trigger and selecting the Type and Secret.

    Secrets

    Adds secrets for your application. Add more secrets by clicking Add secret and selecting the Secret and Mount point.

    Policy

    Click Run policy to select the build run policy. The selected policy determines the order in which builds created from the build configuration must run.

    Hooks

    Select Run build hooks after image is built to run commands at the end of the build and verify the image. Add Hook type, Command, and Arguments to append to the command.

  4. Click Save to save the BuildConfig.

Deleting a BuildConfig

You can delete a BuildConfig using the following command.

Procedure

  • To delete a BuildConfig, enter the following command:

    1. $ oc delete bc <BuildConfigName>

    This also deletes all builds that were instantiated from this BuildConfig.

  • To delete a BuildConfig and keep the builds instatiated from the BuildConfig, specify the --cascade=false flag when you enter the following command:

    1. $ oc delete --cascade=false bc <BuildConfigName>

Viewing build details

You can view build details with the web console or by using the oc describe CLI command.

This displays information including:

  • The build source.

  • The build strategy.

  • The output destination.

  • Digest of the image in the destination registry.

  • How the build was created.

If the build uses the Docker or Source strategy, the oc describe output also includes information about the source revision used for the build, including the commit ID, author, committer, and message.

Procedure

  • To view build details, enter the following command:

    1. $ oc describe build <build_name>

Accessing build logs

You can access build logs using the web console or the CLI.

Procedure

  • To stream the logs using the build directly, enter the following command:

    1. $ oc describe build <build_name>

Accessing BuildConfig logs

You can access BuildConfig logs using the web console or the CLI.

Procedure

  • To stream the logs of the latest build for a BuildConfig, enter the following command:

    1. $ oc logs -f bc/<buildconfig_name>

Accessing BuildConfig logs for a given version build

You can access logs for a given version build for a BuildConfig using the web console or the CLI.

Procedure

  • To stream the logs for a given version build for a BuildConfig, enter the following command:

    1. $ oc logs --version=<number> bc/<buildconfig_name>

Enabling log verbosity

You can enable a more verbose output by passing the BUILD_LOGLEVEL environment variable as part of the sourceStrategy or dockerStrategy in a BuildConfig.

An administrator can set the default build verbosity for the entire OKD instance by configuring env/BUILD_LOGLEVEL. This default can be overridden by specifying BUILD_LOGLEVEL in a given BuildConfig. You can specify a higher priority override on the command line for non-binary builds by passing —build-loglevel to oc start-build.

Available log levels for source builds are as follows:

Level 0

Produces output from containers running the assemble script and all encountered errors. This is the default.

Level 1

Produces basic information about the executed process.

Level 2

Produces very detailed information about the executed process.

Level 3

Produces very detailed information about the executed process, and a listing of the archive contents.

Level 4

Currently produces the same information as level 3.

Level 5

Produces everything mentioned on previous levels and additionally provides docker push messages.

Procedure

  • To enable more verbose output, pass the BUILD_LOGLEVEL environment variable as part of the sourceStrategy or dockerStrategy in a BuildConfig:

    1. sourceStrategy:
    2. ...
    3. env:
    4. - name: "BUILD_LOGLEVEL"
    5. value: "2" (1)
    1Adjust this value to the desired log level.