The diskquota module allows Greenplum Database administrators to limit the amount of disk space used by schemas, roles, or tablespaces in a database.

This topic includes the following sections:

• Installing and Registering the Module (First Use)
• About the diskquota Module
• Understanding How diskquota Monitors Disk Usage
• About the diskquota Functions and Views
• Configuring the diskquota Module
• Using the diskquota Module
• Known Issues and Limitations
• Notes
• Upgrading the Module
• Examples

Installing and Registering the Module (First Use)

The diskquota module is installed when you install Greenplum Database.

Before you can use the module, you must perform these steps:

1. Create the diskquota database. The diskquota module uses this database to store the list of databases where the module is enabled.

   $ createdb diskquota;

2. Add the diskquota shared library to the Greenplum Database shared_preload_libraries server configuration parameter and restart Greenplum Database. Be sure to retain the previous setting of the configuration parameter. For example:

   $ gpconfig -s shared_preload_libraries
   Values on all segments are consistent
   GUC              : shared_preload_libraries
   Master      value: auto_explain
   Segment     value: auto_explain
   $ gpconfig -c shared_preload_libraries -v 'auto_explain,diskquota-2.1'
   $ gpstop -ar

3. Register the diskquota extension in each database in which you want to enforce disk usage quotas. You can register diskquota in up to ten databases.

   $ psql -d testdb -c "CREATE EXTENSION diskquota"

4. If you register the diskquota extension in a database that already contains data, you must initialize the diskquota table size data by running the diskquota.init_table_size_table() UDF in the database. In a database with many files, this can take some time. The diskquota module cannot be used until the initialization is complete.

   =# SELECT diskquota.init_table_size_table();

   Note

   You must run the diskquota.init_table_size_table() UDF for diskquota to work.

About the diskquota Module

The disk usage for a table includes the table data, indexes, toast tables, and free space map. For append-optimized tables, the calculation includes the visibility map and index, and the block directory table.

The diskquota module allows a Greenplum Database administrator to limit the amount of disk space used by tables in schemas or owned by roles in up to 50 databases. The administrator can also use the module to limit the amount of disk space used by schemas and roles on a per-tablespace basis, as well as to limit the disk space used per Greenplum Database segment for a tablespace.

Note

A role-based disk quota cannot be set for the Greenplum Database system owner (the user that creates the Greenplum cluster).

You can set the following quotas with the diskquota module:

• A schema disk quota sets a limit on the disk space that can used by all tables in a database that reside in a specific schema. The disk usage of a schema is defined as the total of disk usage on all segments for all tables in the schema.
• A role disk quota sets a limit on the disk space that can be used used by all tables in a database that are owned by a specific role. The disk usage for a role is defined as the total of disk usage on all segments for all tables the role owns. Although a role is a cluster-level database object, the disk usage for roles is calculated separately for each database.
• A schema tablespace disk quota sets a limit on the disk space that can used by all tables in a database that reside in a specific schema and tablespace.
• A role tablespace disk quota sets a limit on the disk space that can used by all tables in a database that are owned by a specific role and reside in a specific tablespace.
• A per-segment tablespace disk quota sets a limit on the disk space that can be used by a Greeplum Database segment when a tablespace quota is set for a schema or role.

Understanding How diskquota Monitors Disk Usage

A single diskquota launcher process runs on the active Greenplum Database master node. The diskquota launcher process creates and launches a diskquota worker process on the master for each diskquota-enabled database. A worker process is responsible for monitoring the disk usage of tablespaces, schemas, and roles in the target database, and communicates with the Greenplum segments to obtain the sizes of active tables. The worker process also performs quota enforcement, placing tablespaces, schemas, or roles on a denylist when they reach their quota.

When a query plan for a data-adding query is generated, and the tablespace, schema, or role into which data would be loaded is on the denylist, diskquota cancels the query before it starts executing, and reports an error message that the quota has been exceeded.

A query that does not add data, such as a simple SELECT query, is always allowed to run, even when the tablespace, role, or schema is on the denylist.

Diskquota can enforce both soft limits and hard limits for disk usage:

• By default, diskquota always enforces soft limits. diskquota checks quotas before a query runs. If quotas are not exceeded when a query is initiated, diskquota allows the query to run, even if it were to eventually cause a quota to be exceeded.

• When hard limit enforcement of disk usage is enabled, diskquota also monitors disk usage during query execution. If a query exceeds a disk quota during execution, diskquota terminates the query.

  Administrators can enable enforcement of a disk usage hard limit by setting the diskquota.hard_limit server configuration parameter as described in Activating/Deactivating Hard Limit Disk Usage Enforcement.

There is some delay after a quota has been reached before the schema or role is added to the denylist. Other queries could add more data during the delay. The delay occurs because diskquota processes that calculate the disk space used by each table run periodically with a pause between executions (two seconds by default). The delay also occurs when disk usage falls beneath a quota, due to operations such as DROP, TRUNCATE, or VACUUM FULL that remove data. Administrators can change the amount of time between disk space checks by setting the diskquota.naptime server configuration parameter as described in Setting the Delay Between Disk Usage Updates.

Diskquota can operate in both static and dynamic modes:

• When the number of databases in which the diskquota extension is registered is less than or equal to the maximum number of diskquota worker processes, diskquota operates in static mode; it assigns a background worker (bgworker) process to monitor each database, and the bgworker process exits only when the diskquota extension is dropped from the database.

• When the number of databases in which the diskquota extension is registered is greater than the maximum number of diskquota worker processes, diskquota operates in dynamic mode. In dynamic mode, for every monitored database every diskquota.naptime seconds, diskquota creates a bgworker process to collect disk usage information for the database, and then stops the bgworker process immediately after data collection completes. In this mode, diskquota dynamically starts and stops bgworker processes as needed for all monitored databases.

  Administrators can change the maximum number of worker processes configured for diskquota by setting the diskquota.max_workers server configuration parameter as described in Specifying the Maximum Number of Active diskquota Worker Processes.

If a query is unable to run because the tablespace, schema, or role has been denylisted, an administrator can increase the exceeded quota to allow the query to run. The module provides views that you can use to find the tablespaces, schemas, or roles that have exceeded their limits.

About the diskquota Functions and Views

The diskquota module provides user-defined functions (UDFs) and views that you can use to manage and monitor disk space usage in your Greenplum Database deployment.

The functions and views provided by the diskquota module are available in the Greenplum Database schema named diskquota.

Note

You may be required to prepend the schema name (diskquota.) to any UDF or view that you access.

User-defined functions provided by the module include:

Views available in the diskquota module include:

Configuring the diskquota Module

diskquota exposes server configuration parameters that allow you to control certain module functionality:

• diskquota.naptime - Controls how frequently (in seconds) that diskquota recalculates the table sizes.
• diskquota.max_active_tables - Identifies the maximum number of relations (including tables, indexes, etc.) that the diskquota module can monitor at the same time.
• diskquota.hard_limit - Activates or deactivates the hard limit enforcement of disk usage.
• diskquota.max_workers - Specifies the maximum number of diskquota worker processes that may be running at any one time.
• diskquota.max_table_segments - Specifies the maximum number of table segments in the cluster.

You use the gpconfig command to set these parameters in the same way that you would set any Greenplum Database server configuration parameter.

Setting the Delay Between Disk Usage Updates

The diskquota.naptime server configuration parameter specifies how frequently (in seconds) diskquota recalculates the table sizes. The smaller the naptime value, the less delay in detecting changes in disk usage. This example sets the naptime to ten seconds and restarts Greenplum Database:

$ gpconfig -c diskquota.naptime -v 10
$ gpstop -ar

About Shared Memory and the Maximum Number of Relations

The diskquota module uses shared memory to save the denylist and to save the active table list.

The denylist shared memory can hold up to one million database objects that exceed the quota limit. If the denylist shared memory fills, data may be loaded into some schemas or roles after they have reached their quota limit.

Active table shared memory holds up to one million of active tables by default. Active tables are tables that may have changed sizes since diskquota last recalculated the table sizes. diskquota hook functions are called when the storage manager on each Greenplum Database segment creates, extends, or truncates a table file. The hook functions store the identity of the file in shared memory so that its file size can be recalculated the next time the table size data is refreshed.

The diskquota.max_active_tables server configuration parameter identifies the maximum number of relations (including tables, indexes, etc.) that the diskquota module can monitor at the same time. The default value is 300 * 1024. This value should be sufficient for most Greenplum Database installations. Should you change the value of this configuration parameter, you must restart the Greenplum Database server.

Activating/Deactivating Hard Limit Disk Usage Enforcement

When you enable enforcement of a hard limit of disk usage, diskquota checks the quota during query execution. If at any point a currently running query exceeds a quota limit, diskquota terminates the query.

By default, hard limit disk usage enforcement is deactivated for all databases. To activate hard limit enforcement for all databases, set the diskquota.hard_limit server configuration parameter to 'on', and then reload the Greenplum Database configuration:

$ gpconfig -c diskquota.hard_limit -v 'on'
$ gpstop -u

Run the following query to view the hard limit enforcement setting:

SELECT * from diskquota.status();

Specifying the Maximum Number of Active diskquota Worker Processes

The diskquota.max_workers server configuration parameter specifies the maximum number of diskquota worker processes (not including the diskquota launcher process) that may be running at any one time. The default number of maximum worker processes is 10, and the maximum value that you can specify is 20.

You must set this parameter at Greenplum Database server start time.

Note

Setting diskquota.max_workers to a value that is larger than max_worker_processes has no effect; diskquota workers are taken from the pool of worker processes established by that Greenplum Database server configuration parameter setting.

Specifying the Maximum Number of Table Segments (Shards)

A Greenplum table (including a partitioned table’s child tables) is distributed to all segments as a shard. diskquota counts each table shard as a table segment. The diskquota.max_table_segments server configuration parameter identifies the maximum number of table segments in the Greenplum Database cluster, which in turn can gate the maximum number of tables that diskquota can monitor.

The runtime value of diskquota.max_table_segments equals the maximum number of tables multiplied by (number_of_segments + 1). The default value is 10 * 1024 * 1024.

Using the diskquota Module

You can perform the following tasks with the diskquota module:

• View the diskquota Status
• Pause and Resume Disk Quota Exceeded Notifications
• Set a Schema or Role Disk Quota
• Set a Tablespace Disk Quota for a Schema or Role
• Set a Per-Segment Tablespace Disk Quota
• Display Disk Quotas and Disk Usage
• Temporarily Deactivate Disk Quota Monitoring

Viewing the diskquota Status

To view the diskquota module and schema version numbers, and the state of soft and hard limit enforcement in the current database, invoke the status() command:

SELECT diskquota.status();
          name          | status 
------------------------+--------- 
 soft limits            | on 
 hard limits            | on 
 current binary version | 2.0.1 
 current schema version | 2.0

Pausing and Resuming Disk Quota Exceeded Notifications

If you do not care to be notified of disk quota exceeded events for a period of time, you can pause and resume error notification in the current database as shown below:

SELECT diskquota.pause();
-- perform table operations where you do not care to be notified
-- when a disk quota exceeded
SELECT diskquota.resume();

Note

The pause operation does not persist through a Greenplum Database cluster restart; you must invoke diskquota.pause() again when the cluster is back up and running.

Setting a Schema or Role Disk Quota

Use the diskquota.set_schema_quota() and diskquota.set_role_quota() user-defined functions in a database to set, update, or delete disk quota limits for schemas and roles in the database. The functions take two arguments: the schema or role name, and the quota to set. You can specify the quota in units of MB, GB, TB, or PB; for example, '2TB'.

The following example sets a 250GB quota for the acct schema:

SELECT diskquota.set_schema_quota('acct', '250GB');

This example sets a 500MB disk quota for the nickd role:

SELECT diskquota.set_role_quota('nickd', '500MB');

To change a quota, invoke the diskquota.set_schema_quota() or diskquota.set_role_quota() function again with the new quota value.

To remove a schema or role quota, set the quota value to '-1' and invoke the function.

Setting a Tablespace Disk Quota

Use the diskquota.set_schema_tablespace_quota() and diskquota.set_role_tablespace_quota() user-defined functions in a database to set, update, or delete per-tablespace disk quota limits for schemas and roles in the current database. The functions take three arguments: the schema or role name, the tablespace name, and the quota to set. You can specify the quota in units of MB, GB, TB, or PB; for example, '2TB'.

The following example sets a 50GB disk quota for the tablespace named tspaced1 and the acct schema:

SELECT diskquota.set_schema_tablespace_quota('acct', 'tspaced1', '250GB');

This example sets a 500MB disk quota for the tspaced2 tablespace and the nickd role:

SELECT diskquota.set_role_tablespace_quota('nickd', 'tspaced2', '500MB');

To change a quota, invoke the diskquota.set_schema_tablespace_quota() or diskquota.set_role_tablespace_quota() function again with the new quota value.

To remove a schema or role tablespace quota, set the quota value to '-1' and invoke the function.

Setting a Per-Segment Tablespace Disk Quota

When an administrator sets a tablespace quota for a schema or a role, they may also choose to define a per-segment disk quota for the tablespace. Setting a per-segment quota limits the amount of disk space on a single Greenplum Database segment that a single tablespace may consume, and may help prevent a segment’s disk from filling due to data skew.

You can use the diskquota.set_per_segment_quota() function to set, update, or delete a per-segment tablespace disk quota limit. The function takes two arguments: the tablespace name and a ratio. The ratio identifies how much more of the disk quota a single segment can use than the average segment quota. A ratio that you specify must be greater than zero.

You can calculate the average segment quota as follows:

avg_seg_quota = tablespace_quota / number_of_segments

For example, if your Greenplum Database cluster has 8 segments and you set the following schema tablespace quota:

SELECT diskquota.set_schema_tablespace_quota( 'accts', 'tspaced1', '800GB' );

The average segment quota for the tspaced1 tablespace is 800GB / 8 = 100GB.

If you set the following per-segment tablespace quota:

SELECT diskquota.set_per_segment_quota( 'tspaced1', '2.0' );

You can calculate the the maximum allowed disk usage per segment allowed as follows:

max_disk_usage_per_seg = average_segment_quota * ratio

In this example, the maximum disk usage allowed per segment is 100GB * 2.0 = 200GB.

diskquota will allow a query to run if the disk usage on all segments for all tables that are in tablespace tblspc1 and that are goverend by a role or schema quota does not exceed 200GB.

You can change the per-segment tablespace quota by invoking the diskquota.set_per_segment_quota() function again with the new quota value.

To remove a per-segment tablespace quota, set the quota value to '-1' and invoke the function.

To view the per-segment quota ratio set for a tablespace, display the show_segment_ratio_quota_view view. For example:

SELECT tablespace_name, per_seg_quota_ratio
  FROM diskquota.show_segment_ratio_quota_view WHERE tablespace_name in ('tspaced1');
  tablespace_name  | per_seg_quota_ratio
-------------------+---------------------
 tspaced1          |                   2
(1 rows)

Identifying the diskquota-Monitored Databases

Run the following SQL commands to obtain a list of the diskquota-monitored databases in your Greenplum Database cluster:

\c diskquota
SELECT d.datname FROM diskquota_namespace.database_list q, pg_database d
    WHERE q.dbid = d.oid ORDER BY d.datname;

Displaying Disk Quotas and Disk Usage

The diskquota module provides four views to display active quotas and the current computed disk space used.

The diskquota.show_fast_schema_quota_view view lists active quotas for schemas in the current database. The nspsize_in_bytes column contains the calculated size for all tables that belong to the schema.

SELECT * FROM diskquota.show_fast_schema_quota_view;
 schema_name | schema_oid | quota_in_mb | nspsize_in_bytes
-------------+------------+-------------+------------------
 acct        |      16561 |      256000 |           131072
 analytics   |      16519 |  1073741824 |        144670720
 eng         |      16560 |     5242880 |        117833728
 public      |       2200 |         250 |          3014656
(4 rows)

The diskquota.show_fast_role_quota_view view lists the active quotas for roles in the current database. The rolsize_in_bytes column contains the calculated size for all tables that are owned by the role.

SELECT * FROM diskquota.show_fast_role_quota_view;
 role_name | role_oid | quota_in_mb | rolsize_in_bytes
-----------+----------+-------------+------------------
 mdach     |    16558 |         500 |           131072
 adam      |    16557 |         300 |        117833728
 nickd     |    16577 |         500 |        144670720
(3 rows)

You can view the per-tablespace disk quotas for schemas and roles with the diskquota.show_fast_schema_tablespace_quota_view and diskquota.show_fast_role_tablespace_quota_view views. For example:

SELECT schema_name, tablespace_name, quota_in_mb, nspsize_tablespace_in_bytes
   FROM diskquota.show_fast_schema_tablespace_quota_view
   WHERE schema_name = 'acct' and tablespace_name ='tblspc1';
 schema_name | tablespace_name | quota_in_mb | nspsize_tablespace_in_bytes
-------------+-----------------+-------------+-----------------------------
 acct        | tspaced1        |      250000 |                      131072
(1 row)

About Temporarily Deactivating diskquota

You can temporarily deactivate the diskquota module by removing the shared library from shared_preload_libraries. For example::

$ gpconfig -s shared_preload_libraries
Values on all segments are consistent
GUC              : shared_preload_libraries
Master      value: auto_explain,diskquota-2.0
Segment     value: auto_explain,diskquota-2.0
$ gpconfig -c shared_preload_libraries -v 'auto_explain'
$ gpstop -ar

Note

When you deactivate the diskquota module in this manner, disk quota monitoring ceases. To re-initiate disk quota monitoring in this scenario, you must:

1. Re-add the library to shared_preload_libraries.
2. Restart Greenplum Database.
3. Re-size the existing tables in the database by running: SELECT diskquota.init_table_size_table();
4. Restart Greenplum Database again.

Known Issues and Limitations

The diskquota module has the following limitations and known issues:

• diskquota does not automatically work on a segment when the segment is replaced by a mirror. You must manually restart Greenplum Database in this circumstance.
• diskquota cannot enforce a hard limit on ALTER TABLE ADD COLUMN DEFAULT operations.
• If Greenplum Database restarts due to a crash, you must run SELECT diskquota.init_table_size_table(); to ensure that the disk usage statistics are accurate.

• To avoid the chance of deadlock, you must first pause the diskquota extension before you drop the extension in any database:

  SELECT diskquota.pause();
  DROP EXTENSION diskquota;

• diskquota may record an incorrect table size after ALTER TABLESPACE, TRUNCATE, or other operations that modify the relfilenode of the table.

  Cause: diskquota does not acquire any locks on a relation when computing the table size. If another session is updating the table’s tablespace while diskquota is calculating the table size, an error can occur.

  In most cases, you can ignore the difference; diskquota will update the size when new data is next ingested. To immediately ensure that the disk usage statistics are accurate, invoke:

  SELECT diskquota.init_table_size_table();

  And then restart Greenplum Database.

• In rare cases, a VACUUM FULL operation may exceed a quota limit. To remedy the situation, pause diskquota before the operation and then resume diskquota after:

  SELECT diskquota.pause();
  -- perform the VACUUM FULL
  SELECT diskquota.resume();

  If you do not want to pause/resume diskquota, you may choose to temporarily set a higher quota for the operation and then set it back when the VACUUM FULL completes. Consider the following:

  • If you VACUUM FULL only a single table, set the quota to be no smaller than the size of that table.
  • If you VACUUM FULL all tables, set the quota to be no smaller than the size of the largest table in the database.

• The size of uncommitted tables are not counted in quota views. Even though the diskquota.show_fast_role_quota_view view may display a smaller used quota than the quota limit, a new query may trigger a quota exceeded condition in the following circumstance:

  • Hard limit enforcement of disk usage is deactivated.
  • A long-running query in a session has consumed the full disk quota. diskquota does update the denylist in this scenario, but the diskquota.show_fast_role_quota_view may not represent the actual used quota because the long-running query is not yet committed. If you execute a new query while the original is still running, the new query will trigger a quota exceeded error.
• When diskquota is operating in static mode, it may fail to monitor some databases when diskquota.max_workers is greater than the available number of bgworker processes. In dynamic mode, diskquota works correctly when there is at least one available bgworker process.

Notes

The diskquota module can detect a newly created table inside of an uncommitted transaction. The size of the new table is included in the disk usage calculated for the corresponding schema or role. Hard limit enforcement of disk usage must enabled for a quota-exceeding operation to trigger a quota exceeded error in this scenario.

Deleting rows or running VACUUM on a table does not release disk space, so these operations cannot alone remove a schema or role from the diskquota denylist. The disk space used by a table can be reduced by running VACUUM FULL or TRUNCATE TABLE.

The diskquota module supports high availability features provided by the background worker framework. The diskquota launcher process only runs on the active master node. The postmaster on the standby master does not start the diskquota launcher process when it is in standby mode. When the master is down and the administrator runs the gpactivatestandby command, the standby master changes its role to master and the diskquota launcher process is forked automatically. Using the diskquota-enabled database list in the diskquota database, the diskquota launcher creates the diskquota worker processes that manage disk quotas for each database.

When you expand the Greenplum Database cluster, each table consumes more table segments, which may then reduce the maximum number of tables that diskquota can support. If you encounter the following warning, try increasing the diskquota.max_table_segments value, and then restart Greenplum Database:

[diskquota] the number of tables exceeds the limit, please increase the GUC value for diskquota.max_table_segments.

Upgrading the Module

The diskquota 2.1 module is installed when you install or upgrade Greenplum Database. Versions 1.x and 2.0.x of the module will continue to work after you upgrade Greenplum.

Note

Note

diskquota will be paused during the upgrade procedure and will be automatically resumed when the upgrade completes.

If you are upgrading from diskquota version 2.0.x, perform the procedure in Upgrading from Version 2.0.x.

If you are upgrading from diskquota version 1.x, there are two steps in the upgrade procedure:

1. You must first Upgrade the Module from Version 1.x to Version 2.0.x.
2. And then you must Upgrade the Module from Version 2.0.x to version 2.1.

Upgrading from Version 2.0.x

If you are using version 2.0.x of the module and you want to upgrade to diskquota version 2.1, you must perform the following procedure:

1. Replace the diskquota-2.0 shared library in the Greenplum Database shared_preload_libraries server configuration parameter setting and restart Greenplum Database. Be sure to retain the other libraries. For example:

   $ gpconfig -s shared_preload_libraries
   Values on all segments are consistent
   GUC              : shared_preload_libraries
   Coordinator value: auto_explain,diskquota-2.0
   Segment     value: auto_explain,diskquota-2.0
   $ gpconfig -c shared_preload_libraries -v 'auto_explain,diskquota-2.1'
   $ gpstop -ar

2. Update the diskquota extension in every database in which you registered the module:

   $ psql -d testdb -c "ALTER EXTENSION diskquota UPDATE TO '2.1'";

3. Restart Greenplum Database:

   $ gpstop -ar

After upgrade, your existing disk quota rules continue to be enforced, and you can define new tablespace or per-segment rules. You can also utilize the new pause/resume disk quota enforcement functions.

Upgrading From Version 1.x to Version 2.0.x

If you are using version 1.x of the module and you want to upgrade to diskquota version 2.x, you must first perform the following procedure to upgrade to version 2.0.x :

1. Replace the diskquota shared library in the Greenplum Database shared_preload_libraries server configuration parameter setting and restart Greenplum Database. Be sure to retain the other libraries. For example:

   $ gpconfig -s shared_preload_libraries
   Values on all segments are consistent
   GUC              : shared_preload_libraries
   Master      value: auto_explain,diskquota
   Segment     value: auto_explain,diskquota
   $ gpconfig -c shared_preload_libraries -v 'auto_explain,diskquota-2.0'
   $ gpstop -ar

2. Update the diskquota extension in every database in which you registered the module:

   $ psql -d testdb -c "ALTER EXTENSION diskquota UPDATE TO '2.0'";

3. Re-initialize diskquota table size data:

   =# SELECT diskquota.init_table_size_table();

4. Restart Greenplum Database:

   $ gpstop -ar

After upgrade, your existing disk quota rules continue to be enforced, and you can define new tablespace or per-segment rules. You can also utilize the new pause/resume disk quota enforcement functions.

Examples

Setting a Schema Quota

This example demonstrates how to configure a schema quota and then observe diskquota soft limit behavior as data is added to the schema. The example assumes that the diskquota processes are configured and running.

1. Create a database named testdb and connect to it.

   $ createdb testdb
   $ psql -d testdb

2. Create the diskquota extension in the database.

   CREATE EXTENSION diskquota;

3. Create a schema named s1:

   CREATE SCHEMA s1;

4. Set a 1MB disk quota for the s1 schema.

   SELECT diskquota.set_schema_quota('s1', '1MB');

5. Run the following commands to create a table in the s1 schema and insert a small amount of data into it. The schema has no data yet, so it is not on the denylist.

   SET search_path TO s1;
   CREATE TABLE a(i int);
   INSERT INTO a SELECT generate_series(1,100);

6. Insert a large amount of data, enough to exceed the 1MB quota that was set for the schema. Before the INSERT command, the s1 schema is still not on the denylist, so this command should be allowed to run with only soft limit disk usage enforcement in effect, even though the operation will exceed the limit set for the schema.

   INSERT INTO a SELECT generate_series(1,10000000);

7. Attempt to insert a small amount of data. Because the previous command exceeded the schema’s disk quota soft limit, the schema should be denylisted and any data loading command should be cancelled.

   INSERT INTO a SELECT generate_series(1,100);
   ERROR:  schema's disk space quota exceeded with name: s1

8. Remove the quota from the s1 schema by setting it to -1 and again inserts a small amount of data. A 5-second sleep before the INSERT command ensures that the diskquota table size data is updated before the command is run.

   SELECT diskquota.set_schema_quota('s1', '-1');
   -- Wait for 5 seconds to ensure that the denylist is updated
   SELECT pg_sleep(5);
   INSERT INTO a SELECT generate_series(1,100);

Enabling Hard Limit Disk Usage Enforcement and Exceeding Quota

In this example, we enable hard limit enforcement of disk usage, and re-run commands from the previous example.

1. Enable hard limit disk usage enforcement:

   $ gpconfig -c diskquota.hard_limit -v 'on'
   $ gpstop -u

2. Run the following query to view the hard limit enforcement setting:

   SELECT * from diskquota.status();

3. Re-set a 1MB disk quota for the s1 schema.

   SELECT diskquota.set_schema_quota('s1', '1MB');

4. Insert a large amount of data, enough to exceed the 1MB quota that was set for the schema. Before the INSERT command, the s1 schema is still not on the denylist, so this command should be allowed to start. When the operation exceeds the schema quota, diskquota will terminate the query.

   INSERT INTO a SELECT generate_series(1,10000000);
   [hardlimit] schema's disk space quota exceeded

5. Remove the quota from the s1 schema:

   SELECT diskquota.set_schema_quota('s1', '-1');

Setting a Per-Segment Tablespace Quota

This example demonstrates how to configure tablespace and per-segment tablespace quotas. In addition to using the testdb database and the s1 schema that you created in the previous example, this example assumes the following:

• Hard limit enforcement of disk usage is enabled (as in the previous example).
• The Greenplum Database cluster has 8 primary segments.
• A tablespace named tbsp1 has been created in the cluster.

Procedure:

1. Set a disk quota of 1 MB for the tablespace named tbsp1 and the schema named s1:

   SELECT diskquota.set_schema_tablespace_quota('s1', 'tbsp1', '1MB');

2. Set a per-segment ratio of 2 for the tbsp1 tablespace:

   SELECT diskquota.set_per_segment_quota('tbsp1', 2);

   With this ratio setting, the average segment quota is 1MB / 8 = 125KB, and the max per-segment disk usage for the tablespace is 125KB * 2 = 250KB.

3. Create a new table named b and insert some data:

   CREATE TABLE b(i int);
   INSERT INTO b SELECT generate_series(1,100);

4. Insert a large amount of data into the table, enough to exceed the 250KB per-segment quota that was set for the tablespace. When the operation exceeds the per-segment tablespace quota, diskquota will terminate the query.

   INSERT INTO b SELECT generate_series(1,10000000);
   ERROR:  tablespace: tbsp1, schema: s1 diskquota exceeded per segment quota