CI / Jenkins

The main CI infrastructure is maintained at https://jenkins.cilium.io/

Jobs Overview

Cilium-PR-Ginkgo-Tests-Validated

Runs validated Ginkgo tests which are confirmed to be stable and have been verified. These tests must always pass.

The configuration for this job is contained within ginkgo.Jenkinsfile.

The job runs the following steps in parallel:

• Runs the single-node e2e tests using the Docker runtime.
• Runs the multi-node Kubernetes e2e tests against the latest default version of Kubernetes specified above.

This job can be used to run tests on custom branches. To do so, log into Jenkins and go to https://jenkins.cilium.io/job/cilium-ginkgo/configure . Then add your branch name to GitHub Organization -> cilium -> Filter by name (with wildcards) -> Include field and save changes. After you don’t need to run tests on your branch, please remove the branch from this field.

Note

It is also possible to run specific tests from this suite via test-only. The comment can contain 3 arguments: --focus which specifies which tests should be run, --kernel_version for supported kernel version (net-next, 49, 419 are possible values right now), --k8s_version for k8s version. If you want to run only one It block, you need to prepend it with a test suite and create a regex, e.g test-only --focus="K8sDatapathConfig.*Check connectivity with automatic direct nodes routes" --k8s_version=1.18 --kernel_version=net-next will run specified test in 1.18 Kubernetes cluster running on net-next nodes. Kubernetes version defaults to 1.21, kernel version defaults to 4.19.

Running Runtime test suite is still done via test-focus command.

Cilium-PR-Ginkgo-Tests-Kernel

Runs the Kubernetes e2e tests with a 4.19 kernel. The configuration for this job is contained within ginkgo-kernel.Jenkinsfile.

Cilium-PR-Ginkgo-Tests-k8s

Runs the Kubernetes e2e tests against all Kubernetes versions that are not currently not tested as part of each pull-request, but which Cilium still supports, as well as the most-recently-released versions of Kubernetes that might not be declared stable by Kubernetes upstream. Check the contents of ginkgo-kubernetes-all.Jenkinsfile in the branch of Cilium for which you are running tests to see which Kubernetes versions will be tested against.

Ginkgo-CI-Tests-Pipeline

Ginkgo-CI-Tests-Pipeline

Packer-CI-Build

As part of Cilium development, we use a custom base box with a bunch of pre-installed libraries and tools that we need to enhance our daily workflow. That base box is built with Packer and it is hosted in the packer-ci-build GitHub repository.

New versions of this box can be created via Jenkins Packer Build, where new builds of the image will be pushed to Vagrant Cloud . The version of the image corresponds to the BUILD_ID environment variable in the Jenkins job. That version ID will be used in Cilium Vagrantfiles.

Changes to this image are made via contributions to the packer-ci-build repository. Authorized GitHub users can trigger builds with a GitHub comment on the PR containing the trigger phrase build-me-please. In case that a new box needs to be rebased with a different branch than master, authorized developers can run the build with custom parameters. To use a different Cilium branch in the job go to Build with parameters and a base branch can be set as the user needs.

This box will need to be updated when a new developer needs a new dependency that is not installed in the current version of the box, or if a dependency that is cached within the box becomes stale.

Make sure that you update vagrant box versions in test Vagrantfile and root Vagrantfile after new box is built and tested.

Once you change the image versions locally, create a branch named pr/update-packer-ci-build and open a PR github.com/cilium/cilium. It is important that you use that branch name so the VM images are cached into packet.net before the branch is merged.

Testing matrix

Up to date CI testing information regarding k8s - kernel version pairs can always be found in the Cilium CI matrix.

Triggering Pull-Request Builds With Jenkins

To ensure that build resources are used judiciously, builds on Jenkins are manually triggered via comments on each pull-request that contain “trigger-phrases”. Only members of the Cilium GitHub organization are allowed to trigger these jobs.

Depending on the PR target branch, a specific set of jobs is marked as required, as per the Cilium CI matrix. They will be automatically featured in PR checks directly on the PR page. The following trigger phrases may be used to trigger them all at once:

For master PRs: on top of test-me-please, one may use test-missed-k8s to trigger all non-required K8s versions on Kernel 4.9 as per the Cilium CI matrix.

For all PRs: one may manually retrigger a specific job (e.g. in case of a flake) with the individual trigger featured directly in the PR check’s name (e.g. for K8s-1.20-kernel-4.9 (test-1.20-4.9), use test-1.20-4.9).

For a full list of Jenkins PR jobs, see Jenkins. Trigger phrases are configured within each job’s build triggers advanced options.

There are some feature flags based on Pull Requests labels, the list of labels are the following:

• area/containerd: Enable containerd runtime on all Kubernetes test.
• ci/net-next: Run tests on net-next kernel. This causes the test-me-please target to only run on the net-next kernel. It is purely for testing on a different kernel, to merge a PR it must pass the CI without this flag.

Testing with race condition detection enabled

If you want to run test suite with race condition detection enabled, enter following trigger phrases. These jobs are not required to merge.

Using Jenkins for testing

Typically when running Jenkins tests via one of the above trigger phases, it will run all of the tests in that particular category. However, there may be cases where you just want to run a single test quickly on Jenkins and observe the test result. To do so, you need to update the relevant test to have a custom name, and to update the Jenkins file to focus that test. Below is an example patch that shows how this can be achieved.

diff --git a/ginkgo.Jenkinsfile b/ginkgo.Jenkinsfile
index ee17808748a6..637f99269a41 100644
--- a/ginkgo.Jenkinsfile
+++ b/ginkgo.Jenkinsfile
@@ -62,10 +62,10 @@ pipeline {
             steps {
                 parallel(
                     "Runtime":{
-                        sh 'cd ${TESTDIR}; ginkgo --focus="RuntimeValidated"'
+                        sh 'cd ${TESTDIR}; ginkgo --focus="XFoooo"'
                     },
                     "K8s-1.9":{
-                        sh 'cd ${TESTDIR}; K8S_VERSION=1.9 ginkgo --focus="K8sValidated" ${FAILFAST}'
+                        sh 'cd ${TESTDIR}; K8S_VERSION=1.9 ginkgo --focus="K8sFooooo" ${FAILFAST}'
                     },
                     failFast: true
                 )
diff --git a/test/k8sT/Nightly.go b/test/k8sT/Nightly.go
index 62b324619797..3f955c73a818 100644
--- a/test/k8sT/Nightly.go
+++ b/test/k8sT/Nightly.go
@@ -466,7 +466,7 @@ var _ = Describe("NightlyExamples", func() {
                })
-               It("K8sValidated Updating Cilium stable to master", func() {
+               FIt("K8sFooooo K8sValidated Updating Cilium stable to master", func() {
                        podFilter := "k8s:zgroup=testapp"
                        //This test should run in each PR for now.

CI Failure Triage

This section describes the process to triage CI failures. We define 3 categories:

Pipelines subject to triage

Build/test failures for the following Jenkins pipelines must be reported as GitHub issues using the process below:

Triage process

1. Discover untriaged Jenkins failures via the jenkins-failures.sh script. It defaults to checking the previous 24 hours but this can be modified by setting the SINCE environment variable (it is a unix timestamp). The script checks the various test pipelines that need triage.

   $ contrib/scripts/jenkins-failures.sh

   Note

   You can quickly assign SINCE with statements like SINCE=`date -d -3days`

2. Investigate the failure you are interested in and determine if it is a CI-Bug, Flake, or a Regression as defined in the table above.

   1. Search GitHub issues to see if bug is already filed. Make sure to also include closed issues in your search as a CI issue can be considered solved and then re-appears. Good search terms are:

      • The test name, e.g.

        k8s-1.7.K8sValidatedKafkaPolicyTest Kafka Policy Tests KafkaPolicies (from (k8s-1.7.xml))

      • The line on which the test failed, e.g.

        github.com/cilium/cilium/test/k8sT/KafkaPolicies.go:202

      • The error message, e.g.

        Failed to produce from empire-hq on topic deathstar-plan

3. If a corresponding GitHub issue exists, update it with:

   1. A link to the failing Jenkins build (note that the build information is eventually deleted).
   2. Attach the zipfile downloaded from Jenkins with logs from the failing tests. A zipfile for all tests is also available.
   3. Check how much time has passed since the last reported occurrence of this failure and move this issue to the correct column in the CI flakes project board.

4. If no existing GitHub issue was found, file a new GitHub issue:

   1. Attach zipfile downloaded from Jenkins with logs from failing test
   2. If the failure is a new regression or a real bug:
      1. Title: <Short bug description>
      2. Labels kind/bug and needs/triage.
   3. If failure is a new CI-Bug, Flake or if you are unsure:
      1. Title CI: <testname>: <cause>, e.g. CI: K8sValidatedPolicyTest Namespaces: cannot curl service
      2. Labels kind/bug/CI and needs/triage
      3. Include a link to the failing Jenkins build (note that the build information is eventually deleted).
      4. Attach zipfile downloaded from Jenkins with logs from failing test
      5. Include the test name and whole Stacktrace section to help others find this issue.
      6. Add issue to CI flakes project.

   Note

   Be extra careful when you see a new flake on a PR, and want to open an issue. It’s much more difficult to debug these without context around the PR and the changes it introduced. When creating an issue for a PR flake, include a description of the code change, the PR, or the diff. If it isn’t related to the PR, then it should already happen in master, and a new issue isn’t needed.

5. Edit the description of the Jenkins build to mark it as triaged. This will exclude it from future jenkins-failures.sh output.

   1. Login -> Click on build -> Edit Build Information
   2. Add the failure type and GH issue number. Use the table describing the failure categories, at the beginning of this section, to help categorize them.

   Note

   This step can only be performed with an account on Jenkins. If you are interested in CI failure reviews and do not have an account yet, ping us on Slack.

Examples:

• Flake, quay.io is down
• Flake, DNS not ready, #3333
• CI-Bug, K8sValidatedPolicyTest: Namespaces, pod not ready, #9939
• Regression, k8s host policy, #1111

Bisect process

If you are unable to triage the issue, you may try to use bisect job to find when things went awry in Jenkins.

1. Log in to Jenkins
2. Go to https://jenkins.cilium.io/job/bisect-cilium/configure .
3. Under Git Bisect build step fill in Good start revision and Bad end revision.
4. Write description of what you are looking for under Search Identifier.
5. Adjust Retry number and Min Successful Runs to account for current CI flakiness.
6. Save the configuration.
7. Click “Build Now” in https://jenkins.cilium.io/job/bisect-cilium/ .
8. This may take over a day depending on how many underlying builds will be created. The result will be in bisect-cilium console output, actual builds will be happening in https://jenkins.cilium.io/job/cilium-revision/ job.

Infrastructure details

Logging into VM running tests

1. If you have access to credentials for Jenkins, log into the Jenkins slave running the test workload
2. Identify the vagrant box running the specific test

$ vagrant global-status
id       name                          provider   state   directory
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
6e68c6c  k8s1-build-PR-1588-6          virtualbox running /root/jenkins/workspace/cilium_cilium_PR-1588-CWL743UTZEF6CPEZCNXQVSZVEW32FR3CMGKGY6667CU7X43AAZ4Q/tests/k8s
ec5962a  cilium-master-build-PR-1588-6 virtualbox running /root/jenkins/workspace/cilium_cilium_PR-1588-CWL743UTZEF6CPEZCNXQVSZVEW32FR3CMGKGY6667CU7X43AAZ4Q
bfaffaa  k8s2-build-PR-1588-6          virtualbox running /root/jenkins/workspace/cilium_cilium_PR-1588-CWL743UTZEF6CPEZCNXQVSZVEW32FR3CMGKGY6667CU7X43AAZ4Q/tests/k8s
3fa346c  k8s1-build-PR-1588-7          virtualbox running /root/jenkins/workspace/cilium_cilium_PR-1588-CWL743UTZEF6CPEZCNXQVSZVEW32FR3CMGKGY6667CU7X43AAZ4Q@2/tests/k8s
b7ded3c  cilium-master-build-PR-1588-7 virtualbox running /root/jenkins/workspace/cilium_cilium_PR-1588-CWL743UTZEF6CPEZCNXQVSZVEW32FR3CMGKGY6667CU7X43AAZ4Q@2

1. Log into the specific VM

$ JOB_BASE_NAME=PR-1588 BUILD_NUMBER=6 vagrant ssh 6e68c6c

Jenkinsfiles Extensions

Cilium uses a custom Jenkins helper library to gather metadata from PRs and simplify our Jenkinsfiles. The exported methods are:

• ispr(): return true if the current build is a PR.
• setIfPr(string, string): return the first argument in case of a PR, if not a PR return the second one.
• BuildIfLabel(String label, String Job): trigger a new Job if the PR has that specific Label.
• Status(String status, String context): set pull request check status on the given context, example Status("SUCCESS", "$JOB_BASE_NAME")