编辑

Transform

移动

参考

菜单

片段 ‣ 变换 ‣ 移动

快捷键

G

按 G 移动所有选中的片段。在时间轴上水平移动鼠标(左/右)更改片段的位置。垂直移动(上/下)以更改通道。

按住 Ctrl 时拖动吸附到其他片段的起点和终点。鼠标相对于选择的位置影响片段被吸附的位置。如果它更接近选择的初始位置,则选择的起始帧将被吸附,否则结束帧将被吸附。

要使用“波动编辑” (腾出空间给你拖动的片段) ,请在放置片段时按住 Alt 。

也可以按 X 将方向锁定为沿时间轴或按 Y 锁定为可以更改片段通道的方向。

通过按住 LMB 来拖动片段,可以使用鼠标来移动片段。目前,仅可以通过拖动来移动一个片段。

起始帧偏移

The Start Frame Offset for that strip can be selected by clicking LMB on the left handle of the strip; holding it down (or pressing G and then moving the mouse left/right) changes the start frame within the strip by the number of frames you move it. The frame number label under the strip displays the start frame of the strip.

  • If you have a 20-image sequence strip, and drag the left handle to the right by 10 frames, the strip will start at image 11 (images 1 to 10 will be skipped). Use this to clip off a roll-up or undesired lead-in.

  • Dragging the left handle left will create a lead-in (copies) of the first frame for as many frames as you drag it. Use this when you want some frames for a transition at the start of the clip.

结束帧

The End Frame of the strip could be selected by clicking LMB on the right handle of the strip; holding it down (or pressing G) and then moving the mouse changes the ending frame within the strip. The frame number label over the strip displays the end frame of the strip.

  • Dragging the right handle to the left shortens the clip; any original images at the tail are ignored. Use this to quickly clip off a roll-down.

  • Dragging the right handle to the right extends the clip. For movies and images sequences, more of the animation is used until exhausted. Extending a clip beyond its length will render as a copy of the last image. Use this for transitions out of this clip.

Note

多选

按下 Shift-LMB 可选择多个(包括控制柄,指侧边箭头)片段:按下 G 时,所选的所有东西都会随着你的鼠标一起移动 — 这意味着,例如,可以同时移动一个片段,缩短另外两个,并且延展第四个。

Move/Extend from Current Frame

参考

菜单

Strip ‣ Transform ‣ Move/Extend from Current Frame

快捷键

E

选择多个片段后,按下 E 可让你交互地延展片段。这与移动相似,但对于在当前帧周围延展(或缩短)时间来说却很有用。

对于当前帧指示器的“鼠标侧边”的所有选定的片段控制柄会一起变换,因此你可改变当前帧的持续时间。

Slip Strip Contents

参考

菜单

片段 ‣ 变换 ‣ 滑动片段内容

快捷键

S

滑动工具允许你改变片段内容的位置而不移动片段本身。

Snap Strips to the Current Frame

参考

菜单

Strip ‣ Transform ‣ Snap Strips to the Current Frame

快捷键

Shift-S

Moves the strip or control point to the current frame.

Clear Strips Offset

参考

菜单

片段 ‣ 变换 ‣ 清除片段偏移量

快捷键

Alt-O

重置(软)起始/结束帧控制柄。

交换片段

参考

菜单

Strip ‣ Transform ‣ Swap Strips

Left Alt-Left

Swaps the active strip with the strip to the left.

Right Alt-Right

Swaps the active strip with the strip to the right.

Remove Gaps

参考

菜单

Strip ‣ Transform ‣ Insert Gaps

快捷键

Backspace

Remove blank frames between the current frame and the first strip to the left, independent of selection or locked state of strips.

All Gaps

Remove gaps to the right of the strip along with the left.

Insert Gaps

参考

菜单

Strip ‣ Transform ‣ Insert Gaps

快捷键

Equals

Insert blank frames between the current frame and the first strips to the right, independent of selection or locked state of strips.

Image Transform

Scale to Fit

参考

菜单

Strip ‣ Image Transform ‣ Scale to Fit

Adjusts the strips Scale Transforms so the visual contents of the strip to fit exactly within the project’s 规格尺寸 while maintaining the original aspect ratio.

This may mean that the transparent areas may be added along the content’s border to fit the content in the rendered area.

Scale to Fill

参考

菜单

Strip ‣ Image Transform ‣ Scale to Fill

Adjusts the strips Scale Transforms so the visual contents of the strip to span the project’s 规格尺寸 while maintaining the original aspect ratio.

This may mean that portions of the original image no longer fit the content inside the rendered area.

Stretch to Fill

参考

菜单

Strip ‣ Image Transform ‣ Stretch to Fill

Adjusts the strips Scale Transforms so the visual contents of the strip to fill the project’s 规格尺寸. Note, unlike the other two methods described above, Stretch to Fill does not maintaining the original aspect ratio.

This may mean that the original image becomes distorted to fit the content inside the rendered area.

Clear Position

参考

菜单

Strip ‣ Image Transform ‣ Clear Position

Resets the strips Position Transforms to a value of zero.

Clear Scale

参考

菜单

Strip ‣ Image Transform ‣ Clear Scale

Resets the strips Scale Transforms to a value of one.

Clear Rotation

参考

菜单

Strip ‣ Image Transform ‣ Clear Rotation

Resets the strips Rotation Transform to a value of zero.

Clear All

参考

菜单

Strip ‣ Image Transform ‣ Clear All

Resets the strips position, scale, and rotation Transforms to their default values.

剪切

参考

菜单

片段 ‣ 剪切

快捷键

K

在当前帧中将选定的片段剪切成两个。剪切会生成两个使用相同源的片段,且与原始片段的时间和长度一致。

Hint

这可以认为是复制当前片段的快速方法,调整起始/结束帧以形成两个不重叠的片段,显示与以前相同的内容。

硬剪切

参考

菜单

片段 ‣ 硬剪切

快捷键

Shift-K

剪切 ,它会把一个片段分成两个截然不同的片段,但无法通过拖动终点来显示经过每个结果片段的剪切后的帧。

虽然你可以在 片段信息 面板中调整 保持偏移量 的数字区域。

Hint

这可以被认为是模拟将视频文件分割为两部分的方式,用每个部分替换当前片段。

复制片段

参考

菜单

片段 ‣ 复制片段

快捷键

Shift-D

复制一个片段以创建一个非链接的副本;拖动它到一个时间和通道,然后单击 LMB 放下。

Delete

参考

菜单

片段 ‣ 删除

快捷键

Delete, X

删除选定的片段。

分离图像

参考

菜单

片段 ‣ 分离图像

快捷键

Y

仅适用于图像序列 - 将片段转换为多个片段,每一帧对应一个片段。适用于幻灯片放映以及其他你希望在非连续图像中引入一组内容的情况。

长度

你必须指定所需结果片段的持续时间。

Movie Strip

设置渲染尺寸

参考

菜单

Strip ‣ Set Render Size

Sets the render resolution and aspect to match the strip’s resolution.

逐行扫描影片

参考

菜单

Strip ‣ Deinterlace Movies

Converts interlaced video into progressive video.

Effect Strip

Change Effect Input

参考

菜单

Strip ‣ Effect Strip ‣ Change Effect Type

Swaps which strips are the input for the effect strip.

Change Effect Type

参考

菜单

Strip ‣ Effect Strip ‣ Change Effect Type

切换所选特效片段上的特效。

重新指定输入项

参考

菜单

片段 ‣ 效果片段 ‣ 重新指定输入项

快捷键

R

This tool can be used to assign (reconnect) effect strips in a different way. Select three arbitrary strips and press R. If you don’t create a cycle, those will be connected to a new effect chain.

交换输入

参考

菜单

Strip ‣ Effect Strip ‣ Swap Inputs

快捷键

Alt-S

Swaps the first two inputs for the effect strip.

Lock/Mute

Lock Strips Shift-L

Disables the strip from being transformed.

Unlock Strips Shift-Alt-L

Enables disabled strips allowing them to be transformed.

屏蔽/取消屏蔽 H, Alt-H

屏蔽或者取消屏蔽所选片段。

屏蔽/取消屏蔽未选择的片段 Shift-H, Ctrl-Alt-H

屏蔽或者取消屏蔽未选择的所有片段。

Inputs

Reload Strips Alt-R

Reloads the strips from their external saved location.

Reload Strips and Adjust Length Shift-Alt-R

Reloads the strips from their external saved location and re-adjusts the strip duration.

Change Path/Files

更改选定片段中包含的源文件。

Swap Data

Swaps two sequence strips.

上下文菜单

可以在序列编辑器的时间轴上单击 RMB 来激活上下文菜单。这个菜单可快速访问一些常用的工具。

淡化

参考

菜单

添加 ‣ 淡化

该菜单部分包含用于添加和删除片段淡入淡出的操作。对于可视片段,操作将动画处理不透明度,而对于音频片段,则将动画处理音量。

清除淡化

从所选序列中删除淡入淡出动画。

Fade In and Out

淡入淡出所选片断。

淡入

淡入选定的片段。

淡出

淡出选定的片段。

From Current Frame

Fade from the current frame to the end of overlapping sequences.

To Current Frame

Fade from the start of sequences under the Playhead to the current frame.