Jobs

Jobs represent one-off tasks that run to completion and then stop.

A Job creates one or more Pods and will continue to retry execution of the Pods until a specified number of them successfully terminate. As pods successfully complete, the Job tracks the successful completions. When a specified number of successful completions is reached, the task (ie, Job) is complete. Deleting a Job will clean up the Pods it created. Suspending a Job will delete its active Pods until the Job is resumed again.

A simple case is to create one Job object in order to reliably run one Pod to completion. The Job object will start a new Pod if the first Pod fails or is deleted (for example due to a node hardware failure or a node reboot).

You can also use a Job to run multiple Pods in parallel.

If you want to run a Job (either a single task, or several in parallel) on a schedule, see CronJob.

Running an example Job

Here is an example Job config. It computes π to 2000 places and prints it out. It takes around 10s to complete.

controllers/job.yaml Jobs - 图1

  1. apiVersion: batch/v1
  2. kind: Job
  3. metadata:
  4. name: pi
  5. spec:
  6. template:
  7. spec:
  8. containers:
  9. - name: pi
  10. image: perl:5.34.0
  11. command: ["perl", "-Mbignum=bpi", "-wle", "print bpi(2000)"]
  12. restartPolicy: Never
  13. backoffLimit: 4

You can run the example with this command:

  1. kubectl apply -f https://kubernetes.io/examples/controllers/job.yaml

The output is similar to this:

  1. job.batch/pi created

Check on the status of the Job with kubectl:

  1. Name: pi
  2. Namespace: default
  3. Selector: batch.kubernetes.io/controller-uid=c9948307-e56d-4b5d-8302-ae2d7b7da67c
  4. Labels: batch.kubernetes.io/controller-uid=c9948307-e56d-4b5d-8302-ae2d7b7da67c
  5. batch.kubernetes.io/job-name=pi
  6. ...
  7. Annotations: batch.kubernetes.io/job-tracking: ""
  8. Parallelism: 1
  9. Completions: 1
  10. Start Time: Mon, 02 Dec 2019 15:20:11 +0200
  11. Completed At: Mon, 02 Dec 2019 15:21:16 +0200
  12. Duration: 65s
  13. Pods Statuses: 0 Running / 1 Succeeded / 0 Failed
  14. Pod Template:
  15. Labels: batch.kubernetes.io/controller-uid=c9948307-e56d-4b5d-8302-ae2d7b7da67c
  16. batch.kubernetes.io/job-name=pi
  17. Containers:
  18. pi:
  19. Image: perl:5.34.0
  20. Port: <none>
  21. Host Port: <none>
  22. Command:
  23. perl
  24. -Mbignum=bpi
  25. -wle
  26. print bpi(2000)
  27. Environment: <none>
  28. Mounts: <none>
  29. Volumes: <none>
  30. Events:
  31. Type Reason Age From Message
  32. ---- ------ ---- ---- -------
  33. Normal SuccessfulCreate 21s job-controller Created pod: pi-xf9p4
  34. Normal Completed 18s job-controller Job completed
  1. apiVersion: batch/v1
  2. kind: Job
  3. metadata:
  4. annotations: batch.kubernetes.io/job-tracking: ""
  5. ...
  6. creationTimestamp: "2022-11-10T17:53:53Z"
  7. generation: 1
  8. labels:
  9. batch.kubernetes.io/controller-uid: 863452e6-270d-420e-9b94-53a54146c223
  10. batch.kubernetes.io/job-name: pi
  11. name: pi
  12. namespace: default
  13. resourceVersion: "4751"
  14. uid: 204fb678-040b-497f-9266-35ffa8716d14
  15. spec:
  16. backoffLimit: 4
  17. completionMode: NonIndexed
  18. completions: 1
  19. parallelism: 1
  20. selector:
  21. matchLabels:
  22. batch.kubernetes.io/controller-uid: 863452e6-270d-420e-9b94-53a54146c223
  23. suspend: false
  24. template:
  25. metadata:
  26. creationTimestamp: null
  27. labels:
  28. batch.kubernetes.io/controller-uid: 863452e6-270d-420e-9b94-53a54146c223
  29. batch.kubernetes.io/job-name: pi
  30. spec:
  31. containers:
  32. - command:
  33. - perl
  34. - -Mbignum=bpi
  35. - -wle
  36. - print bpi(2000)
  37. image: perl:5.34.0
  38. imagePullPolicy: IfNotPresent
  39. name: pi
  40. resources: {}
  41. terminationMessagePath: /dev/termination-log
  42. terminationMessagePolicy: File
  43. dnsPolicy: ClusterFirst
  44. restartPolicy: Never
  45. schedulerName: default-scheduler
  46. securityContext: {}
  47. terminationGracePeriodSeconds: 30
  48. status:
  49. active: 1
  50. ready: 0
  51. startTime: "2022-11-10T17:53:57Z"
  52. uncountedTerminatedPods: {}

To view completed Pods of a Job, use kubectl get pods.

To list all the Pods that belong to a Job in a machine readable form, you can use a command like this:

  1. pods=$(kubectl get pods --selector=batch.kubernetes.io/job-name=pi --output=jsonpath='{.items[*].metadata.name}')
  2. echo $pods

The output is similar to this:

  1. pi-5rwd7

Here, the selector is the same as the selector for the Job. The --output=jsonpath option specifies an expression with the name from each Pod in the returned list.

View the standard output of one of the pods:

  1. kubectl logs $pods

Another way to view the logs of a Job:

  1. kubectl logs jobs/pi

The output is similar to this:

  1. 3.1415926535897932384626433832795028841971693993751058209749445923078164062862089986280348253421170679821480865132823066470938446095505822317253594081284811174502841027019385211055596446229489549303819644288109756659334461284756482337867831652712019091456485669234603486104543266482133936072602491412737245870066063155881748815209209628292540917153643678925903600113305305488204665213841469519415116094330572703657595919530921861173819326117931051185480744623799627495673518857527248912279381830119491298336733624406566430860213949463952247371907021798609437027705392171762931767523846748184676694051320005681271452635608277857713427577896091736371787214684409012249534301465495853710507922796892589235420199561121290219608640344181598136297747713099605187072113499999983729780499510597317328160963185950244594553469083026425223082533446850352619311881710100031378387528865875332083814206171776691473035982534904287554687311595628638823537875937519577818577805321712268066130019278766111959092164201989380952572010654858632788659361533818279682303019520353018529689957736225994138912497217752834791315155748572424541506959508295331168617278558890750983817546374649393192550604009277016711390098488240128583616035637076601047101819429555961989467678374494482553797747268471040475346462080466842590694912933136770289891521047521620569660240580381501935112533824300355876402474964732639141992726042699227967823547816360093417216412199245863150302861829745557067498385054945885869269956909272107975093029553211653449872027559602364806654991198818347977535663698074265425278625518184175746728909777727938000816470600161452491921732172147723501414419735685481613611573525521334757418494684385233239073941433345477624168625189835694855620992192221842725502542568876717904946016534668049886272327917860857843838279679766814541009538837863609506800642251252051173929848960841284886269456042419652850222106611863067442786220391949450471237137869609563643719172874677646575739624138908658326459958133904780275901

Writing a Job spec

As with all other Kubernetes config, a Job needs apiVersion, kind, and metadata fields.

When the control plane creates new Pods for a Job, the .metadata.name of the Job is part of the basis for naming those Pods. The name of a Job must be a valid DNS subdomain value, but this can produce unexpected results for the Pod hostnames. For best compatibility, the name should follow the more restrictive rules for a DNS label. Even when the name is a DNS subdomain, the name must be no longer than 63 characters.

A Job also needs a .spec section.

Job Labels

Job labels will have batch.kubernetes.io/ prefix for job-name and controller-uid.

Pod Template

The .spec.template is the only required field of the .spec.

The .spec.template is a pod template. It has exactly the same schema as a Pod, except it is nested and does not have an apiVersion or kind.

In addition to required fields for a Pod, a pod template in a Job must specify appropriate labels (see pod selector) and an appropriate restart policy.

Only a RestartPolicy equal to Never or OnFailure is allowed.

Pod selector

The .spec.selector field is optional. In almost all cases you should not specify it. See section specifying your own pod selector.

Parallel execution for Jobs

There are three main types of task suitable to run as a Job:

  1. Non-parallel Jobs
    • normally, only one Pod is started, unless the Pod fails.
    • the Job is complete as soon as its Pod terminates successfully.
  2. Parallel Jobs with a fixed completion count:
    • specify a non-zero positive value for .spec.completions.
    • the Job represents the overall task, and is complete when there are .spec.completions successful Pods.
    • when using .spec.completionMode="Indexed", each Pod gets a different index in the range 0 to .spec.completions-1.
  3. Parallel Jobs with a work queue:
    • do not specify .spec.completions, default to .spec.parallelism.
    • the Pods must coordinate amongst themselves or an external service to determine what each should work on. For example, a Pod might fetch a batch of up to N items from the work queue.
    • each Pod is independently capable of determining whether or not all its peers are done, and thus that the entire Job is done.
    • when any Pod from the Job terminates with success, no new Pods are created.
    • once at least one Pod has terminated with success and all Pods are terminated, then the Job is completed with success.
    • once any Pod has exited with success, no other Pod should still be doing any work for this task or writing any output. They should all be in the process of exiting.

For a non-parallel Job, you can leave both .spec.completions and .spec.parallelism unset. When both are unset, both are defaulted to 1.

For a fixed completion count Job, you should set .spec.completions to the number of completions needed. You can set .spec.parallelism, or leave it unset and it will default to 1.

For a work queue Job, you must leave .spec.completions unset, and set .spec.parallelism to a non-negative integer.

For more information about how to make use of the different types of job, see the job patterns section.

Controlling parallelism

The requested parallelism (.spec.parallelism) can be set to any non-negative value. If it is unspecified, it defaults to 1. If it is specified as 0, then the Job is effectively paused until it is increased.

Actual parallelism (number of pods running at any instant) may be more or less than requested parallelism, for a variety of reasons:

  • For fixed completion count Jobs, the actual number of pods running in parallel will not exceed the number of remaining completions. Higher values of .spec.parallelism are effectively ignored.
  • For work queue Jobs, no new Pods are started after any Pod has succeeded — remaining Pods are allowed to complete, however.
  • If the Job Controller has not had time to react.
  • If the Job controller failed to create Pods for any reason (lack of ResourceQuota, lack of permission, etc.), then there may be fewer pods than requested.
  • The Job controller may throttle new Pod creation due to excessive previous pod failures in the same Job.
  • When a Pod is gracefully shut down, it takes time to stop.

Completion mode

FEATURE STATE: Kubernetes v1.24 [stable]

Jobs with fixed completion count - that is, jobs that have non null .spec.completions - can have a completion mode that is specified in .spec.completionMode:

  • NonIndexed (default): the Job is considered complete when there have been .spec.completions successfully completed Pods. In other words, each Pod completion is homologous to each other. Note that Jobs that have null .spec.completions are implicitly NonIndexed.

  • Indexed: the Pods of a Job get an associated completion index from 0 to .spec.completions-1. The index is available through four mechanisms:

    • The Pod annotation batch.kubernetes.io/job-completion-index.
    • The Pod label batch.kubernetes.io/job-completion-index (for v1.28 and later). Note the feature gate PodIndexLabel must be enabled to use this label, and it is enabled by default.
    • As part of the Pod hostname, following the pattern $(job-name)-$(index). When you use an Indexed Job in combination with a Service, Pods within the Job can use the deterministic hostnames to address each other via DNS. For more information about how to configure this, see Job with Pod-to-Pod Communication.
    • From the containerized task, in the environment variable JOB_COMPLETION_INDEX.

    The Job is considered complete when there is one successfully completed Pod for each index. For more information about how to use this mode, see Indexed Job for Parallel Processing with Static Work Assignment.

Note: Although rare, more than one Pod could be started for the same index (due to various reasons such as node failures, kubelet restarts, or Pod evictions). In this case, only the first Pod that completes successfully will count towards the completion count and update the status of the Job. The other Pods that are running or completed for the same index will be deleted by the Job controller once they are detected.

Handling Pod and container failures

A container in a Pod may fail for a number of reasons, such as because the process in it exited with a non-zero exit code, or the container was killed for exceeding a memory limit, etc. If this happens, and the .spec.template.spec.restartPolicy = "OnFailure", then the Pod stays on the node, but the container is re-run. Therefore, your program needs to handle the case when it is restarted locally, or else specify .spec.template.spec.restartPolicy = "Never". See pod lifecycle for more information on restartPolicy.

An entire Pod can also fail, for a number of reasons, such as when the pod is kicked off the node (node is upgraded, rebooted, deleted, etc.), or if a container of the Pod fails and the .spec.template.spec.restartPolicy = "Never". When a Pod fails, then the Job controller starts a new Pod. This means that your application needs to handle the case when it is restarted in a new pod. In particular, it needs to handle temporary files, locks, incomplete output and the like caused by previous runs.

By default, each pod failure is counted towards the .spec.backoffLimit limit, see pod backoff failure policy. However, you can customize handling of pod failures by setting the Job’s pod failure policy.

Additionally, you can choose to count the pod failures independently for each index of an Indexed Job by setting the .spec.backoffLimitPerIndex field (for more information, see backoff limit per index).

Note that even if you specify .spec.parallelism = 1 and .spec.completions = 1 and .spec.template.spec.restartPolicy = "Never", the same program may sometimes be started twice.

If you do specify .spec.parallelism and .spec.completions both greater than 1, then there may be multiple pods running at once. Therefore, your pods must also be tolerant of concurrency.

When the feature gates PodDisruptionConditions and JobPodFailurePolicy are both enabled, and the .spec.podFailurePolicy field is set, the Job controller does not consider a terminating Pod (a pod that has a .metadata.deletionTimestamp field set) as a failure until that Pod is terminal (its .status.phase is Failed or Succeeded). However, the Job controller creates a replacement Pod as soon as the termination becomes apparent. Once the pod terminates, the Job controller evaluates .backoffLimit and .podFailurePolicy for the relevant Job, taking this now-terminated Pod into consideration.

If either of these requirements is not satisfied, the Job controller counts a terminating Pod as an immediate failure, even if that Pod later terminates with phase: "Succeeded".

Pod backoff failure policy

There are situations where you want to fail a Job after some amount of retries due to a logical error in configuration etc. To do so, set .spec.backoffLimit to specify the number of retries before considering a Job as failed. The back-off limit is set by default to 6. Failed Pods associated with the Job are recreated by the Job controller with an exponential back-off delay (10s, 20s, 40s …) capped at six minutes.

The number of retries is calculated in two ways:

  • The number of Pods with .status.phase = "Failed".
  • When using restartPolicy = "OnFailure", the number of retries in all the containers of Pods with .status.phase equal to Pending or Running.

If either of the calculations reaches the .spec.backoffLimit, the Job is considered failed.

Note: If your job has restartPolicy = "OnFailure", keep in mind that your Pod running the Job will be terminated once the job backoff limit has been reached. This can make debugging the Job’s executable more difficult. We suggest setting restartPolicy = "Never" when debugging the Job or using a logging system to ensure output from failed Jobs is not lost inadvertently.

Backoff limit per index

FEATURE STATE: Kubernetes v1.29 [beta]

Note: You can only configure the backoff limit per index for an Indexed Job, if you have the JobBackoffLimitPerIndex feature gate enabled in your cluster.

When you run an indexed Job, you can choose to handle retries for pod failures independently for each index. To do so, set the .spec.backoffLimitPerIndex to specify the maximal number of pod failures per index.

When the per-index backoff limit is exceeded for an index, Kuberentes considers the index as failed and adds it to the .status.failedIndexes field. The succeeded indexes, those with a successfully executed pods, are recorded in the .status.completedIndexes field, regardless of whether you set the backoffLimitPerIndex field.

Note that a failing index does not interrupt execution of other indexes. Once all indexes finish for a Job where you specified a backoff limit per index, if at least one of those indexes did fail, the Job controller marks the overall Job as failed, by setting the Failed condition in the status. The Job gets marked as failed even if some, potentially nearly all, of the indexes were processed successfully.

You can additionally limit the maximal number of indexes marked failed by setting the .spec.maxFailedIndexes field. When the number of failed indexes exceeds the maxFailedIndexes field, the Job controller triggers termination of all remaining running Pods for that Job. Once all pods are terminated, the entire Job is marked failed by the Job controller, by setting the Failed condition in the Job status.

Here is an example manifest for a Job that defines a backoffLimitPerIndex:

/controllers/job-backoff-limit-per-index-example.yaml Jobs - 图2

  1. apiVersion: batch/v1
  2. kind: Job
  3. metadata:
  4. name: job-backoff-limit-per-index-example
  5. spec:
  6. completions: 10
  7. parallelism: 3
  8. completionMode: Indexed # required for the feature
  9. backoffLimitPerIndex: 1 # maximal number of failures per index
  10. maxFailedIndexes: 5 # maximal number of failed indexes before terminating the Job execution
  11. template:
  12. spec:
  13. restartPolicy: Never # required for the feature
  14. containers:
  15. - name: example
  16. image: python
  17. command: # The jobs fails as there is at least one failed index
  18. # (all even indexes fail in here), yet all indexes
  19. # are executed as maxFailedIndexes is not exceeded.
  20. - python3
  21. - -c
  22. - |
  23. import os, sys
  24. print("Hello world")
  25. if int(os.environ.get("JOB_COMPLETION_INDEX")) % 2 == 0:
  26. sys.exit(1)

In the example above, the Job controller allows for one restart for each of the indexes. When the total number of failed indexes exceeds 5, then the entire Job is terminated.

Once the job is finished, the Job status looks as follows:

  1. kubectl get -o yaml job job-backoff-limit-per-index-example
  1. status:
  2. completedIndexes: 1,3,5,7,9
  3. failedIndexes: 0,2,4,6,8
  4. succeeded: 5 # 1 succeeded pod for each of 5 succeeded indexes
  5. failed: 10 # 2 failed pods (1 retry) for each of 5 failed indexes
  6. conditions:
  7. - message: Job has failed indexes
  8. reason: FailedIndexes
  9. status: "True"
  10. type: Failed

Additionally, you may want to use the per-index backoff along with a pod failure policy. When using per-index backoff, there is a new FailIndex action available which allows you to avoid unnecessary retries within an index.

Pod failure policy

FEATURE STATE: Kubernetes v1.26 [beta]

Note: You can only configure a Pod failure policy for a Job if you have the JobPodFailurePolicy feature gate enabled in your cluster. Additionally, it is recommended to enable the PodDisruptionConditions feature gate in order to be able to detect and handle Pod disruption conditions in the Pod failure policy (see also: Pod disruption conditions). Both feature gates are available in Kubernetes 1.29.

A Pod failure policy, defined with the .spec.podFailurePolicy field, enables your cluster to handle Pod failures based on the container exit codes and the Pod conditions.

In some situations, you may want to have a better control when handling Pod failures than the control provided by the Pod backoff failure policy, which is based on the Job’s .spec.backoffLimit. These are some examples of use cases:

  • To optimize costs of running workloads by avoiding unnecessary Pod restarts, you can terminate a Job as soon as one of its Pods fails with an exit code indicating a software bug.
  • To guarantee that your Job finishes even if there are disruptions, you can ignore Pod failures caused by disruptions (such as preemption, API-initiated eviction or taint-based eviction) so that they don’t count towards the .spec.backoffLimit limit of retries.

You can configure a Pod failure policy, in the .spec.podFailurePolicy field, to meet the above use cases. This policy can handle Pod failures based on the container exit codes and the Pod conditions.

Here is a manifest for a Job that defines a podFailurePolicy:

/controllers/job-pod-failure-policy-example.yaml Jobs - 图3

  1. apiVersion: batch/v1
  2. kind: Job
  3. metadata:
  4. name: job-pod-failure-policy-example
  5. spec:
  6. completions: 12
  7. parallelism: 3
  8. template:
  9. spec:
  10. restartPolicy: Never
  11. containers:
  12. - name: main
  13. image: docker.io/library/bash:5
  14. command: ["bash"] # example command simulating a bug which triggers the FailJob action
  15. args:
  16. - -c
  17. - echo "Hello world!" && sleep 5 && exit 42
  18. backoffLimit: 6
  19. podFailurePolicy:
  20. rules:
  21. - action: FailJob
  22. onExitCodes:
  23. containerName: main # optional
  24. operator: In # one of: In, NotIn
  25. values: [42]
  26. - action: Ignore # one of: Ignore, FailJob, Count
  27. onPodConditions:
  28. - type: DisruptionTarget # indicates Pod disruption

In the example above, the first rule of the Pod failure policy specifies that the Job should be marked failed if the main container fails with the 42 exit code. The following are the rules for the main container specifically:

  • an exit code of 0 means that the container succeeded
  • an exit code of 42 means that the entire Job failed
  • any other exit code represents that the container failed, and hence the entire Pod. The Pod will be re-created if the total number of restarts is below backoffLimit. If the backoffLimit is reached the entire Job failed.

Note: Because the Pod template specifies a restartPolicy: Never, the kubelet does not restart the main container in that particular Pod.

The second rule of the Pod failure policy, specifying the Ignore action for failed Pods with condition DisruptionTarget excludes Pod disruptions from being counted towards the .spec.backoffLimit limit of retries.

Note: If the Job failed, either by the Pod failure policy or Pod backoff failure policy, and the Job is running multiple Pods, Kubernetes terminates all the Pods in that Job that are still Pending or Running.

These are some requirements and semantics of the API:

  • if you want to use a .spec.podFailurePolicy field for a Job, you must also define that Job’s pod template with .spec.restartPolicy set to Never.
  • the Pod failure policy rules you specify under spec.podFailurePolicy.rules are evaluated in order. Once a rule matches a Pod failure, the remaining rules are ignored. When no rule matches the Pod failure, the default handling applies.
  • you may want to restrict a rule to a specific container by specifying its name inspec.podFailurePolicy.rules[*].onExitCodes.containerName. When not specified the rule applies to all containers. When specified, it should match one the container or initContainer names in the Pod template.
  • you may specify the action taken when a Pod failure policy is matched by spec.podFailurePolicy.rules[*].action. Possible values are:
    • FailJob: use to indicate that the Pod’s job should be marked as Failed and all running Pods should be terminated.
    • Ignore: use to indicate that the counter towards the .spec.backoffLimit should not be incremented and a replacement Pod should be created.
    • Count: use to indicate that the Pod should be handled in the default way. The counter towards the .spec.backoffLimit should be incremented.
    • FailIndex: use this action along with backoff limit per index to avoid unnecessary retries within the index of a failed pod.

Note: When you use a podFailurePolicy, the job controller only matches Pods in the Failed phase. Pods with a deletion timestamp that are not in a terminal phase (Failed or Succeeded) are considered still terminating. This implies that terminating pods retain a tracking finalizer until they reach a terminal phase. Since Kubernetes 1.27, Kubelet transitions deleted pods to a terminal phase (see: Pod Phase). This ensures that deleted pods have their finalizers removed by the Job controller.

Note: Starting with Kubernetes v1.28, when Pod failure policy is used, the Job controller recreates terminating Pods only once these Pods reach the terminal Failed phase. This behavior is similar to podReplacementPolicy: Failed. For more information, see Pod replacement policy.

Job termination and cleanup

When a Job completes, no more Pods are created, but the Pods are usually not deleted either. Keeping them around allows you to still view the logs of completed pods to check for errors, warnings, or other diagnostic output. The job object also remains after it is completed so that you can view its status. It is up to the user to delete old jobs after noting their status. Delete the job with kubectl (e.g. kubectl delete jobs/pi or kubectl delete -f ./job.yaml). When you delete the job using kubectl, all the pods it created are deleted too.

By default, a Job will run uninterrupted unless a Pod fails (restartPolicy=Never) or a Container exits in error (restartPolicy=OnFailure), at which point the Job defers to the .spec.backoffLimit described above. Once .spec.backoffLimit has been reached the Job will be marked as failed and any running Pods will be terminated.

Another way to terminate a Job is by setting an active deadline. Do this by setting the .spec.activeDeadlineSeconds field of the Job to a number of seconds. The activeDeadlineSeconds applies to the duration of the job, no matter how many Pods are created. Once a Job reaches activeDeadlineSeconds, all of its running Pods are terminated and the Job status will become type: Failed with reason: DeadlineExceeded.

Note that a Job’s .spec.activeDeadlineSeconds takes precedence over its .spec.backoffLimit. Therefore, a Job that is retrying one or more failed Pods will not deploy additional Pods once it reaches the time limit specified by activeDeadlineSeconds, even if the backoffLimit is not yet reached.

Example:

  1. apiVersion: batch/v1
  2. kind: Job
  3. metadata:
  4. name: pi-with-timeout
  5. spec:
  6. backoffLimit: 5
  7. activeDeadlineSeconds: 100
  8. template:
  9. spec:
  10. containers:
  11. - name: pi
  12. image: perl:5.34.0
  13. command: ["perl", "-Mbignum=bpi", "-wle", "print bpi(2000)"]
  14. restartPolicy: Never

Note that both the Job spec and the Pod template spec within the Job have an activeDeadlineSeconds field. Ensure that you set this field at the proper level.

Keep in mind that the restartPolicy applies to the Pod, and not to the Job itself: there is no automatic Job restart once the Job status is type: Failed. That is, the Job termination mechanisms activated with .spec.activeDeadlineSeconds and .spec.backoffLimit result in a permanent Job failure that requires manual intervention to resolve.

Clean up finished jobs automatically

Finished Jobs are usually no longer needed in the system. Keeping them around in the system will put pressure on the API server. If the Jobs are managed directly by a higher level controller, such as CronJobs, the Jobs can be cleaned up by CronJobs based on the specified capacity-based cleanup policy.

TTL mechanism for finished Jobs

FEATURE STATE: Kubernetes v1.23 [stable]

Another way to clean up finished Jobs (either Complete or Failed) automatically is to use a TTL mechanism provided by a TTL controller for finished resources, by specifying the .spec.ttlSecondsAfterFinished field of the Job.

When the TTL controller cleans up the Job, it will delete the Job cascadingly, i.e. delete its dependent objects, such as Pods, together with the Job. Note that when the Job is deleted, its lifecycle guarantees, such as finalizers, will be honored.

For example:

  1. apiVersion: batch/v1
  2. kind: Job
  3. metadata:
  4. name: pi-with-ttl
  5. spec:
  6. ttlSecondsAfterFinished: 100
  7. template:
  8. spec:
  9. containers:
  10. - name: pi
  11. image: perl:5.34.0
  12. command: ["perl", "-Mbignum=bpi", "-wle", "print bpi(2000)"]
  13. restartPolicy: Never

The Job pi-with-ttl will be eligible to be automatically deleted, 100 seconds after it finishes.

If the field is set to 0, the Job will be eligible to be automatically deleted immediately after it finishes. If the field is unset, this Job won’t be cleaned up by the TTL controller after it finishes.

Note:

It is recommended to set ttlSecondsAfterFinished field because unmanaged jobs (Jobs that you created directly, and not indirectly through other workload APIs such as CronJob) have a default deletion policy of orphanDependents causing Pods created by an unmanaged Job to be left around after that Job is fully deleted. Even though the control plane eventually garbage collects the Pods from a deleted Job after they either fail or complete, sometimes those lingering pods may cause cluster performance degradation or in worst case cause the cluster to go offline due to this degradation.

You can use LimitRanges and ResourceQuotas to place a cap on the amount of resources that a particular namespace can consume.

Job patterns

The Job object can be used to process a set of independent but related work items. These might be emails to be sent, frames to be rendered, files to be transcoded, ranges of keys in a NoSQL database to scan, and so on.

In a complex system, there may be multiple different sets of work items. Here we are just considering one set of work items that the user wants to manage together — a batch job.

There are several different patterns for parallel computation, each with strengths and weaknesses. The tradeoffs are:

  • One Job object for each work item, versus a single Job object for all work items. One Job per work item creates some overhead for the user and for the system to manage large numbers of Job objects. A single Job for all work items is better for large numbers of items.
  • Number of Pods created equals number of work items, versus each Pod can process multiple work items. When the number of Pods equals the number of work items, the Pods typically requires less modification to existing code and containers. Having each Pod process multiple work items is better for large numbers of items.
  • Several approaches use a work queue. This requires running a queue service, and modifications to the existing program or container to make it use the work queue. Other approaches are easier to adapt to an existing containerised application.
  • When the Job is associated with a headless Service, you can enable the Pods within a Job to communicate with each other to collaborate in a computation.

The tradeoffs are summarized here, with columns 2 to 4 corresponding to the above tradeoffs. The pattern names are also links to examples and more detailed description.

PatternSingle Job objectFewer pods than work items?Use app unmodified?
Queue with Pod Per Work Itemsometimes
Queue with Variable Pod Count
Indexed Job with Static Work Assignment
Job with Pod-to-Pod Communicationsometimessometimes
Job Template Expansion

When you specify completions with .spec.completions, each Pod created by the Job controller has an identical spec. This means that all pods for a task will have the same command line and the same image, the same volumes, and (almost) the same environment variables. These patterns are different ways to arrange for pods to work on different things.

This table shows the required settings for .spec.parallelism and .spec.completions for each of the patterns. Here, W is the number of work items.

Pattern.spec.completions.spec.parallelism
Queue with Pod Per Work ItemWany
Queue with Variable Pod Countnullany
Indexed Job with Static Work AssignmentWany
Job with Pod-to-Pod CommunicationWW
Job Template Expansion1should be 1

Advanced usage

Suspending a Job

FEATURE STATE: Kubernetes v1.24 [stable]

When a Job is created, the Job controller will immediately begin creating Pods to satisfy the Job’s requirements and will continue to do so until the Job is complete. However, you may want to temporarily suspend a Job’s execution and resume it later, or start Jobs in suspended state and have a custom controller decide later when to start them.

To suspend a Job, you can update the .spec.suspend field of the Job to true; later, when you want to resume it again, update it to false. Creating a Job with .spec.suspend set to true will create it in the suspended state.

When a Job is resumed from suspension, its .status.startTime field will be reset to the current time. This means that the .spec.activeDeadlineSeconds timer will be stopped and reset when a Job is suspended and resumed.

When you suspend a Job, any running Pods that don’t have a status of Completed will be terminated. with a SIGTERM signal. The Pod’s graceful termination period will be honored and your Pod must handle this signal in this period. This may involve saving progress for later or undoing changes. Pods terminated this way will not count towards the Job’s completions count.

An example Job definition in the suspended state can be like so:

  1. kubectl get job myjob -o yaml
  1. apiVersion: batch/v1
  2. kind: Job
  3. metadata:
  4. name: myjob
  5. spec:
  6. suspend: true
  7. parallelism: 1
  8. completions: 5
  9. template:
  10. spec:
  11. ...

You can also toggle Job suspension by patching the Job using the command line.

Suspend an active Job:

  1. kubectl patch job/myjob --type=strategic --patch '{"spec":{"suspend":true}}'

Resume a suspended Job:

  1. kubectl patch job/myjob --type=strategic --patch '{"spec":{"suspend":false}}'

The Job’s status can be used to determine if a Job is suspended or has been suspended in the past:

  1. kubectl get jobs/myjob -o yaml
  1. apiVersion: batch/v1
  2. kind: Job
  3. # .metadata and .spec omitted
  4. status:
  5. conditions:
  6. - lastProbeTime: "2021-02-05T13:14:33Z"
  7. lastTransitionTime: "2021-02-05T13:14:33Z"
  8. status: "True"
  9. type: Suspended
  10. startTime: "2021-02-05T13:13:48Z"

The Job condition of type “Suspended” with status “True” means the Job is suspended; the lastTransitionTime field can be used to determine how long the Job has been suspended for. If the status of that condition is “False”, then the Job was previously suspended and is now running. If such a condition does not exist in the Job’s status, the Job has never been stopped.

Events are also created when the Job is suspended and resumed:

  1. kubectl describe jobs/myjob
  1. Name: myjob
  2. ...
  3. Events:
  4. Type Reason Age From Message
  5. ---- ------ ---- ---- -------
  6. Normal SuccessfulCreate 12m job-controller Created pod: myjob-hlrpl
  7. Normal SuccessfulDelete 11m job-controller Deleted pod: myjob-hlrpl
  8. Normal Suspended 11m job-controller Job suspended
  9. Normal SuccessfulCreate 3s job-controller Created pod: myjob-jvb44
  10. Normal Resumed 3s job-controller Job resumed

The last four events, particularly the “Suspended” and “Resumed” events, are directly a result of toggling the .spec.suspend field. In the time between these two events, we see that no Pods were created, but Pod creation restarted as soon as the Job was resumed.

Mutable Scheduling Directives

FEATURE STATE: Kubernetes v1.27 [stable]

In most cases, a parallel job will want the pods to run with constraints, like all in the same zone, or all either on GPU model x or y but not a mix of both.

The suspend field is the first step towards achieving those semantics. Suspend allows a custom queue controller to decide when a job should start; However, once a job is unsuspended, a custom queue controller has no influence on where the pods of a job will actually land.

This feature allows updating a Job’s scheduling directives before it starts, which gives custom queue controllers the ability to influence pod placement while at the same time offloading actual pod-to-node assignment to kube-scheduler. This is allowed only for suspended Jobs that have never been unsuspended before.

The fields in a Job’s pod template that can be updated are node affinity, node selector, tolerations, labels, annotations and scheduling gates.

Specifying your own Pod selector

Normally, when you create a Job object, you do not specify .spec.selector. The system defaulting logic adds this field when the Job is created. It picks a selector value that will not overlap with any other jobs.

However, in some cases, you might need to override this automatically set selector. To do this, you can specify the .spec.selector of the Job.

Be very careful when doing this. If you specify a label selector which is not unique to the pods of that Job, and which matches unrelated Pods, then pods of the unrelated job may be deleted, or this Job may count other Pods as completing it, or one or both Jobs may refuse to create Pods or run to completion. If a non-unique selector is chosen, then other controllers (e.g. ReplicationController) and their Pods may behave in unpredictable ways too. Kubernetes will not stop you from making a mistake when specifying .spec.selector.

Here is an example of a case when you might want to use this feature.

Say Job old is already running. You want existing Pods to keep running, but you want the rest of the Pods it creates to use a different pod template and for the Job to have a new name. You cannot update the Job because these fields are not updatable. Therefore, you delete Job old but leave its pods running, using kubectl delete jobs/old --cascade=orphan. Before deleting it, you make a note of what selector it uses:

  1. kubectl get job old -o yaml

The output is similar to this:

  1. kind: Job
  2. metadata:
  3. name: old
  4. ...
  5. spec:
  6. selector:
  7. matchLabels:
  8. batch.kubernetes.io/controller-uid: a8f3d00d-c6d2-11e5-9f87-42010af00002
  9. ...

Then you create a new Job with name new and you explicitly specify the same selector. Since the existing Pods have label batch.kubernetes.io/controller-uid=a8f3d00d-c6d2-11e5-9f87-42010af00002, they are controlled by Job new as well.

You need to specify manualSelector: true in the new Job since you are not using the selector that the system normally generates for you automatically.

  1. kind: Job
  2. metadata:
  3. name: new
  4. ...
  5. spec:
  6. manualSelector: true
  7. selector:
  8. matchLabels:
  9. batch.kubernetes.io/controller-uid: a8f3d00d-c6d2-11e5-9f87-42010af00002
  10. ...

The new Job itself will have a different uid from a8f3d00d-c6d2-11e5-9f87-42010af00002. Setting manualSelector: true tells the system that you know what you are doing and to allow this mismatch.

Job tracking with finalizers

FEATURE STATE: Kubernetes v1.26 [stable]

The control plane keeps track of the Pods that belong to any Job and notices if any such Pod is removed from the API server. To do that, the Job controller creates Pods with the finalizer batch.kubernetes.io/job-tracking. The controller removes the finalizer only after the Pod has been accounted for in the Job status, allowing the Pod to be removed by other controllers or users.

Note: See My pod stays terminating if you observe that pods from a Job are stucked with the tracking finalizer.

Elastic Indexed Jobs

FEATURE STATE: Kubernetes v1.27 [beta]

You can scale Indexed Jobs up or down by mutating both .spec.parallelism and .spec.completions together such that .spec.parallelism == .spec.completions. When the ElasticIndexedJobfeature gate on the API server is disabled, .spec.completions is immutable.

Use cases for elastic Indexed Jobs include batch workloads which require scaling an indexed Job, such as MPI, Horovord, Ray, and PyTorch training jobs.

Delayed creation of replacement pods

FEATURE STATE: Kubernetes v1.29 [beta]

Note: You can only set podReplacementPolicy on Jobs if you enable the JobPodReplacementPolicy feature gate (enabled by default).

By default, the Job controller recreates Pods as soon they either fail or are terminating (have a deletion timestamp). This means that, at a given time, when some of the Pods are terminating, the number of running Pods for a Job can be greater than parallelism or greater than one Pod per index (if you are using an Indexed Job).

You may choose to create replacement Pods only when the terminating Pod is fully terminal (has status.phase: Failed). To do this, set the .spec.podReplacementPolicy: Failed. The default replacement policy depends on whether the Job has a podFailurePolicy set. With no Pod failure policy defined for a Job, omitting the podReplacementPolicy field selects the TerminatingOrFailed replacement policy: the control plane creates replacement Pods immediately upon Pod deletion (as soon as the control plane sees that a Pod for this Job has deletionTimestamp set). For Jobs with a Pod failure policy set, the default podReplacementPolicy is Failed, and no other value is permitted. See Pod failure policy to learn more about Pod failure policies for Jobs.

  1. kind: Job
  2. metadata:
  3. name: new
  4. ...
  5. spec:
  6. podReplacementPolicy: Failed
  7. ...

Provided your cluster has the feature gate enabled, you can inspect the .status.terminating field of a Job. The value of the field is the number of Pods owned by the Job that are currently terminating.

  1. kubectl get jobs/myjob -o yaml
  1. apiVersion: batch/v1
  2. kind: Job
  3. # .metadata and .spec omitted
  4. status:
  5. terminating: 3 # three Pods are terminating and have not yet reached the Failed phase

Alternatives

Bare Pods

When the node that a Pod is running on reboots or fails, the pod is terminated and will not be restarted. However, a Job will create new Pods to replace terminated ones. For this reason, we recommend that you use a Job rather than a bare Pod, even if your application requires only a single Pod.

Replication Controller

Jobs are complementary to Replication Controllers. A Replication Controller manages Pods which are not expected to terminate (e.g. web servers), and a Job manages Pods that are expected to terminate (e.g. batch tasks).

As discussed in Pod Lifecycle, Job is only appropriate for pods with RestartPolicy equal to OnFailure or Never. (Note: If RestartPolicy is not set, the default value is Always.)

Single Job starts controller Pod

Another pattern is for a single Job to create a Pod which then creates other Pods, acting as a sort of custom controller for those Pods. This allows the most flexibility, but may be somewhat complicated to get started with and offers less integration with Kubernetes.

One example of this pattern would be a Job which starts a Pod which runs a script that in turn starts a Spark master controller (see spark example), runs a spark driver, and then cleans up.

An advantage of this approach is that the overall process gets the completion guarantee of a Job object, but maintains complete control over what Pods are created and how work is assigned to them.

What’s next